Bush LE-22GY14R Instruction manual

Download

Page 1

22" Full HD 1080p Digital LED TV

Installation & Operating Instructions

- Please keep for future reference

359/2955

LE-22GY14R

HIGH-DEFINITION MULTIMEDIA INTERFACE

Important

These instructions contain important information which will help you get the best from your television and ensure safe and correct installation and operation.

- Please read these instructions fully before installing or operating

For any help concerning set up and use of your TV please call the

Customer Helpline: 0345 604 0105

Lines open: 9am - 8pm Monday to Saturday and 10am - 4pm Sunday

Issue 1 - 10/05/13

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 1 2013-5-3 11:25:42

Page 2

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 2 2013-5-3 11:25:43

Page 3

Contents

Safety Information 2 - 3

Getting Started 4 - 13

Support 4

TV Features 5

Accessories included 5

Base Stand Assembly Instruction 6

Viewing remote control - TV 7-9 TV - Control buttons (Top side） 10

Aerial connection 10

Power connection 10

Remote control - Inserting batteries 11

Switching the TV On and Off 11

Operation using TV control buttons 12

Operation using remote control 12

Initial setup 13

General operation 13

Connections 14 - 16

Left side connections explained 14

Left bottom connections explained 15

HDMI Connections 16

SCART Connections 16

VGA Connections 16

Channel management (ATV / DTV Mode)

24-27

Lock System management 28

Setup management 28-32

Entertainment 33 - 35

Viewing Photo 33-34

Listening to Music 34

Viewing Movies 34-35

My Text 35

Other information 36 - 39

Digital reception 36

Plug replacement - UK and Ireland only 37

Energy label 37

Trouble shooting 38

Disposal information 39

Basic Features 17 - 32

How to navigate menus 17

Electronic programme guide (EPG) (DTV mode) 17

Teletext (ATV mode) 18

Digital Teletext (DTV mode) 19

Time Shift Function (DTV mode) 19-20

Recording DTV Programme onto a USB Storage Device 20

Timer Programming 21

Play Recorded Programme 22

Picture management 22-23

Sound management 23-24

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 1 2013-5-3 11:25:43

Page 4

Safety Information

Important

- Please read these instructions fully before installing or operating

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Power source

 The TV should be operated only from a 100-240V AC,

50/60 Hz outlet.

Warning: Do not leave your TV in standby or operating

mode when you leave your house.

Positioning the TV

 For ventilation, please leave a clear space of at least

10cm all around the TV.

10cm

within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s

Do not place the TV, furniture, etc. on the power cord or

pinch the cord.

 Handle the power cord by the plug, do not unplug the

TV by pulling the power cord.

 Never touch the power cord/plug with wet hands as this

could cause a short circuit or electric shock.

 Never make a knot in the power cord or tie it with other

cords.

 Power cords should be placed in such away that they

are not likely to be stepped on or driven over.



an electric shock. When damaged it must be replaced,

to constitute a risk of electric shock of persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

10cm

Do not block the ventilation openings.

 Do not place the TV on sloping or unstable surfaces, the

TV may tip over.

 To prevent damage to the TV, do not place any objects

on top of the TV.

 Only use the TV in moderate climates.

Power cord and plug

 The power cord plug should be easily accessible. In

case of storms and lightning, when going on holiday, or when the TV is not used for a long period of time

Moisture and Water

Do not use this TV in a humid or damp place (avoid

bathrooms, the sink in the kitchen, and near the washing machine).

Do not expose this TV to rain or water, as this may be

dangerous.

Do not

splashing.

 If any solid object or liquid falls into the cabinet, unplug

before operating it any further.

Ventilation

 The slots and openings on the TV set are intended for

ventilation and to ensure reliable operation.

 To prevent overheating, these openings must not be

.tekcos rewop sniam eht morf droc rewop eht tcennocsid

blocked or covered in anyway.

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 2 2013-5-3 11:25:45

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

Page 5

Safety Information

Important

- Please read these instructions fully before installing or operating

Heat sources and Flames

Do not expose the TV to direct sunlight or other heat

sources.



sources of intense heat such as an electric heater.



candles, are placed on top of the TV.

Headphone volume

 Excessive sound pressure from earphones and

headphones can cause hearing loss, please take care.

Wall mounting (optional)

To prevent injury, this TV must be securely attached to the wall in accordance with the installation instructions (if the option is available).

LCD Screen

 The LCD screen is a very high technology product

Replacement parts

When replacement parts are required, make sure that the service technician has used replacement parts,

hazards.

Servicing

Warning: Risk of exposure to radiation from class 1/

class 3b visible and invisible laser beams. Do not open the TV and stare directly into beam.

Warning: Risk of electric shock, do not attempt to

repair, service or modify this TV yourself. Contact the manufacturer, their approved service agent or the

Customer Helpline: 0345 604 0105.

This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

picture details. Occasionally, a few non-active pixels

red point. Please note that this does not affect the performance of your product.



other hard objects.

Cleaning

 Before cleaning, unplug the TV from the wall socket.

Do not use liquid or aerosol cleaners. Only use a soft,

dry cloth.

Batteries

Warning: Incorrect installation of batteries may cause

battery leakage and corrosion, resulting in damage to the remote control.

Do not mix old and new batteries, or

batteries of different types.

Do not

Do not dispose of batteries with normal household

waste, take to a local recycling centre.

Warning: To prevent the spread of open

keep candles or other

away from this

product at all times.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 3 2013-5-3 11:25:45

Page 6

Getting Started

The Argos Technical Helpline is here to help

Technical experts are available 7 days a week

 Simple help and advice on setting up your digital

equipment (image).

 Guidance on connecting other devices to your

television such as a DVD player, Sky, home cinema system or a games console.

 Order spare parts, including that lost remote

control.

 Any other technical issues you may need

assistance with.

Call us today: 0345 604 0105

Local call rates applies*

Lines open 9am-8pm Monday to Saturday and 10am-4pm Sunday.

*Calls to Argos enquiry lines may attract a charge and set up fee from residential lines depending on your call plan/tariff. Mobile and other providers costs may vary, see www.bt.com/pricing for details.

For Security and training purposes, telephone calls to and from customer service centres maybe recorded and monitored. Calls from Republic of Ireland will attract international call charges.

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 4 2013-5-3 11:25:45

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

Page 7

Getting Started

TV - Features

 Remote controlled colour LCD TV.

 Fully integrated digital TV (DVB-T).

 HDMI connectors for digital video and audio.

This connection is also designed to accept high de

nition signals.

 USB input.

 100 programmes from VHF, UHF (analogue).

 400 programmes for digital mode (DTV).

 OSD menu system.

 Scart socket for external devices (such as video,

video games, audio set, etc.).

 Stereo sound system.

 Teletext, fastext, TOP text.

 Headphone connection.

 Automatic programming system.

 Forward or backward manual tuning.

 Sleep timer.

Accessories included

 TV

 Stand Base

 Screws (4PCS)

 MINI YPBPR Cable

 Child lock.

 AVL (Automatic Volume Limiting).

 PLL (Frequency Search).

 PC input.

 Plug & Play for Windows 98, ME, 2000, XP, Vista.



 MINI AV Cable

 Remote Control

 Batteries: 2 x AAA

 Instruction Book

CH.LIST

P.MODE S.MOD E

TV.RD

LANG

TIMESHIFT

/FAV

/CANCEL

/TTX

SUBTITLE

SIZE

/HOLD

INDEX

SUBPAGE

/REVEAL

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 5 2013-5-3 11:25:48

Page 8

Getting Started

Installing / Removing the Base Stand

Base Stand Assembly Instruction

1. Place the TV with the display side down on a

flat surface.Use a cloth to protect. Locate the bottom at the stand.

2. Fix the bottom with turning the screw (4PCS)

tightly on the stand.

WALL MOUNTING INSTALLATION GUIDELINES

This television can be wall mounted as follows:

1. Place the LED LCD Television onto a solid

surface. Please place some soft material over the front of the screen to protect it from any damage.

2. Remove the screws (3PCS) from the lower

part of the television, where the base joins to the TV, and take away the stand (put the stand somewhere safe for future use).

INSTALLATION NOTES

This TV can be connected to an AC 100-240 Volts, 50/60 Hz power supply. Never connect straight to a DC power supply.

Locate the TV in a room where light does not strike the screen directly. Total darkness or a r the screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.

Allow enough space between the TV and the wall to permit ventilation.

Avoid excessively warm locations to prevent possible damage to the cabinet or premature component failure.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

ction on

3. Use the four screws provided to fix the TV

onto a wall mounting bracket (not included) via the four VESA standard holes on the back of the television.

100 x 100mm VESA mount

Page 9

Getting Started

Viewing remote control - TV

Switches the TV between on and standby mode.

MUTE

Mutes and restores your TV sound.

3. 0-9 Number Button

Press to select a programme. (ATV / DTV mode)

4. CH.LIST

Display channel list. (ATV / DTV mode)

Return to the previous viewing channel. (ATV / DTV mode)

6. P.MODE

Select picture mode: Dynamic / Standard / Mild / Personal.

7. S.MODE

CH.LIST

P.MODE S.MOD E

TV.RD

LANG

9 8

10 11

12 13

Select sound mode: Standard / Music / Movie / Personal.

8. TV.RD

Select TV program or Radio program. (DTV mode).

9. LANG

Select DTV audio language. (DTV mode)

10.SOURCE

Select among the different input signal

sources: DTV / ATV / AV / SCART / YPbPr / HDMI / PC / USB.

11.DISPLAY

Display the present screen information such as the current channel and the input source.

12.CH+/-

Select a channel.

13. VOL+/-

Adjust the volume.

14. NICAM

Switch between different audio channels (only

applicable when the TV programme has this feature).

15. ASPECT

Select from the following mode settings: 16:9 / Zoom1 / Zoom2 / Auto / 4:3.

/TTX

/HOLD

/FAV

/CANCEL

/REVEAL

SIZE

SUBPAGE

TIMESHIFT

SUBTITLE

INDEX

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 7 2013-5-3 11:25:59

Page 10

Getting Started

Viewing remote control - TV

16. SLEEP

Set the TV sleep timer.

17. EPG

Display the EPG (Electronic Program Guide). (DTV mode)

18.

Allows you to navigate the OSD menus and adjust the system settings to your preference.

 Confirm the selection in the OSD menus.

 Display a list of channels saved in the TV

tuner memory.

19. MENU

Display the OSD (On Screen Display) menu.

20. EXIT

Exit the OSD (On Screen Display) menu.

21.

Press once to stop. (USB mode)

FAV

Display the Favourite Channel list. ( ATV / DTV mode)

22.

Record the current programme. (DTV mode)

23.

 To start the timeshift playback. (DTV mode)

 To start playback or pause. (USB mode)

24. TIMESHIFT

Start the time-shift function. (DTV mode)

19 21

CH.LIST

P.MODE S.MOD E

/FAV

/TTX

/CANCEL

/REVEAL

/HOLD

TV.RD

LANG

TIMESHIFT

SUBTITLE

SIZE

INDEX

SUBPAGE

25.

TTX

Turn on and off the Teletext function. (ATV / DTV mode)

To skip to the beginning of the previous chapter / track / photo. (USB mode)

26. SUBTITLE

Display the subtitle which is broadcast with the program. (DTV mode)

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 8 2013-5-3 11:26:00

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

Page 11

Getting Started

Viewing remote control - TV

27. CANCEL

To exit the teletext mode. (ATV / DTV mode)

To reverse playback rapidly. (USB mode)

28.

SIZE

To enlarge the picture on the TV in teletext. (ATV / DTV mode)

29.

HOLD

Freezes a multi-page passage on screen in teletext. (ATV / DTV mode)

To skip to the beginning of the next chapter / track / photo. (USB mode)

30.

INDEX

To select the page number of the index from teletext. (ATV / DTV mode)

31.

REVEAL

Reveals hidden information such as the answer to a quiz in teletext. (ATV / DTV mode).

To advance playback rapidly. (USB mode)

32.

SUBPAGE

Displays the subpage on the teletext screen. (ATV / DTV mode)

33. RED/GREEN/YELLOW/BLUE

Press these buttons directly to select corresponding function on the screen.

CH.LIST

P.MODE S.MOD E

/TTX

/HOLD

/FAV

/CANCEL

/REVEAL

TV.RD

SIZE

SUBPAGE

LANG

TIMESHIFT

SUBTITLE

INDEX

29 30 31

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 9 2013-5-3 11:26:01

Page 12

Getting Started

TV - Control buttons (Top side)

VOL- button

Decreases the volume.

VOL+ button

Increases the volume.

3. CH- button

Moves down a channel.

4. CH+button

Moves up a channel.

5. MENU button

Displays the OSD (on screen display) menu.

6. SOURCE button

Press to select among different input signal sources: DTV / ATV / AV / SCART / YPbPr / HDMI / PC / USB.Confirmed the selection

on OSD menu.

) button

7. (

Turns the TV on when in standby mode or turns the TV off into standby mode.

Aerial connection

Connect the “aerial” or “cable TV” plug to AERIAL INPUT (ANT.) socket located on the back of the TV.

Power connection

Please note: After unpacking, allow the TV to reach ambient room temperature before connecting the TV to the mains power socket.

Connect the power cord plug to the mains power socket.

1234567

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 10 2013-5-3 11:26:04

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

Page 13

Getting Started

Remote control -

Remove the battery cover on the back of the remote control, gently push down and pull backwards at the same time as shown.

Insert two AAA/R3 or equivalent type batteries. Ensure the batteries are inserted the correct way and replace the battery cover.

Note: When the remote control is not going to be used for long periods of time, the batteries should be removed. Otherwise the remote control may be damaged, caused by battery leakage and corrosion.

Inserting batteries

Switching the TV On and Off

Switching the TV On

With power cord plug connected to the mains power socket and TV in ‘Standby’ mode.

To switch the TV on from standby mode, either:

a: The Remote control; Press the “

” button.

AAA/R3 X2

Batteries

Switching the TV Off

Either press the “ control or press the “ of the TV, the TV will then switch to standby

” button on the remote

” button on the top

mode.

b: The TV; Press the “ the TV.

” button on the top of

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 11 2013-5-3 11:26:05

Page 14

Getting Started

Operation using TV control buttons Operation using remote control

The VOL+/VOL- buttons will function as volume up/down as default. Even if you set other functions for these buttons, the VOL+/VOL- buttons will return to volume control after a short while.

Volume Setting

Press VOL+/VOL- buttons to increase or decrease volume.

Programme Selection

Press CH+/CH- buttons to select the next or previous programme.

The remote control is designed to control all the functions of the model you selected.

Volume Setting

Press VOL+ button to increase the volume. Press VOL- button to decrease the volume. A volume level scale (slider) will be displayed on the screen.

Programme Selection (Previous or Next Programme)

Press CH- button to select the previous programme. Press CH+ button to select the next programme.

Programme Selection (Direct Access)

Press number buttons on the remote control to select programmes between 0 and 9. The TV will switch to the selected programme.

CH.LIST

P.MODE S.MOD E

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 12 2013-5-3 11:26:08

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

TV.RD

LANG

Page 15

Getting Started

Initial setup

1. Connect one end of the RF coaxial cable to

the aerial socket on the wall and the other end of the cable to the RF  socket at the bottom of your TV.

2. Connect the mains cable to the mains socket

after you have completed all the connections.

With power cord plug connected to the mains power socket and TV in ‘Standby’ mode.

At this stage, the TV switches to standby mode. The

red LED indicator will illuminate on the front panel of the TV.

4. In standby mode, press the

top of the TV or the

button on the remote control to turn the TV on. The red LED indicator will turn blue.

5. The first time you turn the TV on, it will go straight into First Time Setup menu. Press

buttons to navigate the menu and

the change the settings.

First Time Setup

OSD Language

Mode Setting Country Auto Scan

Start

Move Adjust MENU: Return EXIT: Exit

OSD Language

Selects your desired language to be displayed on the menu. The default on-screen menu language is set as English.

Mode Setting

Selects your desired mode setting.  Home Mode: Viewing at home.  Store Mode: For store demo, the brightness

is higher than home mode.

Country

Selects the country where you will operate the TV. The default country is set as UK.

Auto Scan

Selects the auto scan type: DTV+ATV / DTV / ATV.

Start

Press the OK button to start auto tuning. Auto Scan will commence. The display will show the progress of the tuning and the number of channels found.

button on the

English

Home Mode

DTV+ATV

Initial setup

Auto Scan

Scanning CH34

Digital Channels Found: DTV :10 Radio :0 Data:0

Analog Channels Found: 0

MENU: Skip EXIT: Exit

6. If you want to skip the DTV tuning, press the MENU button to interrupt the tuning half way.

You will then go straight to ATV tuning. You may repeat the above step if you also want to skip the ATV tuning.

General operation

Press the SOURCE button on the remote control and select DTV to switch the TV to Digital Terrestrial Television Broadcasting.

Information Banner

Whenever you change channel using the CH+/ CH- buttons or the number buttons, the TV

displays the broadcast picture along with an information banner on the top left of the screen (available only in DTV/ATV 

The information banner can be displayed at any time while watching TV by pressing the DISPLAY button on the remote control.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 13 2013-5-3 11:26:08

Page 16

Connections

Left side connections explained

HDMI Input

Connects a device that has an HDMI socket.

. The TV can display High Definition pictures from devices such as a High Definition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets or Component Socket. No sound connection is needed for an HDMI to HDMI connection.

USB Input

To connect devices to the TV, providing fast data exchange. USB will have function in USB/DTV mode.

YPbPr

YPbPr Input socket is just suitable for YPbPr Mini Cable.

Connect to a DVD player, Digital Set-Top-Box, or other AV devices with component (YPbPr) video output sockets.

Connect to the composite VIDEO and AUDIO (L/R) output sockets on external video devices. on external video devices.

CI Slot

Used to insert a CI card. A CI card allows you to view all the channels that you subscribe to. For more information, see “Conditional Access” section.

HDMI

MINI

YPBPR

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 14 2013-5-3 11:26:10

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

Page 17

Connections

Left bottom connections explained

Headphone jack

To connect an external headphone to the TV. Connect to the HEADPHONE jack to listen to the TV from headphones.

Note: Headphone volume can be changed using “VOL+” or “VOL-” buttons.

PC Input (VGA) / PC AUDIO

Connects a personal computer to the TV. Connect the PC cable between the PC INPUT on the TV and the PC output on the PC.

Note: If you connect a device to the TV via the PC cable, you should also use an audio cable to connect your device to the PC AUDIO INPUT to enable audio.

SCART socket

Inputs or outputs for external devices. Connect the SCART cable between the SCART socket on the TV and the SCART socket on the external device (decoder, VCR or DVD player).

Note: If an external device is connected via the SCART socket, the TV will automatically switch to SCART mode.

COAXIAL

To connect to the audio socket on the digital/ standard 5.1 audio system.

RF Input (ANT.)

10.

Connects to aerial (antenna) or cable TV. If you use a decoder or a media recorder, you should connect the aerial cable through the device to the TV with an appropriate aerial cable.

11. OPTICAL

To connect to the audio socket on the digital/ standard 5.1 audio system.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 14 2013-5-3 11:26:10

Page 18

Connections

HDMI Connections

HDMI lets you enjoy high definition digital images and high quality sound by connecting the TV to external devices such as DVD players, set top boxes or gaming equipment.

Power off both the TV and the device before making any connections.

For more information, refer to your device’s own instruction book.

When connecting, switch “Source” to “HDMI”. See, “Input Selection” section.

Note: HDMI cable is not supplied.

SCART Connections

Most devices support SCART connection. You can connect a DVD recorder, VCR or decoder to the TV using the SCART socket.

Power off both the TV and the device before making any connections.

For more information, refer to your device’s own instruction book.

Note: The Scart cable is not supplied.

VGA Connections

You can connect a computer (PC) to the TV to display your computer’s screen image on the TV.

Power off both computer and TV before making any connections.

Use a 15-pin D-sub display cable to connect a PC to the TV. Use an audio cable between PC AUDIO inputs on the left side of the TV and audio output on your PC to enable sound connection.

When the connection is made, switch “Source” to “PC”. See “Input selection” section.

Set the resolution that suits your viewing requirements. Resolution information can be found in the “Appendix parts”

Note: The VGA cable is not supplied.

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 16 2013-5-3 11:26:16

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

Page 19

Basic Features

How to navigate menus - Selecting source

1. Press the SOURCE button on the top of the

TV or the SOURCE button on the remote

control to display the Input source list.

2. Press the

source AV / YPbPr / HDMI / PC / USB.

3. Press OK button to confirm your selection.

buttons to select the input

that you want: DTV / ATV / SCART/

Electronic programme guide (EPG) (DTV mode)

This system has an Electronic Programme Guide (EPG) to help you navigate through all the possible viewing options.

The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of programme information will vary, depending on the particular broadcaster).

This function can be used only when the EPG information is broadcast by broadcasting companies.

The EPG displays the programme details for the next 7 days.

1. Press the EPG button to switch on EPG.

PROGRAM GUIDE

26 Dec 2008 10:00 - 26 Dec 2008 10:25 Big Cook Little Cook

Penguin: Cookey series with Big Cook Ben and foot-high Little Cook Small. Ben comes in to the cate wearing flippers and a mask he’s found in the fancy dress box. [AD,S]

009 BBC FOUR

071 CBeebies

081 BBC Parliament

087 Community

301 301

302 302

PrevDate NextDate Schedule Reminder

Move

10:00 Big Cook Little Cook

10:25 Bob the Builder

10:40 Me Too!

11:00 Something Special

11:15 Doodle Do

11:35 Our Planet

26 Dec 2008 10:21:43

[Children’s]

Rec: Record OK: Display EXIT: Exit

SOURCE

DTV

ATV SCART AV YPbPr HDMI PC USB

Info bar commands:

RED (Prev. Date)

Press the RED button to view the schedule of the previous day.

GREEN (Next Date) Press the GREEN button to view the schedule of the next day.

YELLOW (Schedule) Press the YELLOW button to view the preset reminders in the schedule list. Press the

YELLOW button to return to the EPG.

BLUE (Reminder)

Press the BLUE button while on the selected programme, the Reminder setting menu will be displayed.

Press the

buttons to adjust the settings and then press the Save button to confirm the settings. After confirmation, the EPG Schedule List will then be displayed with your preset reminders shown. Press the YELLOW button to return to the EPG. The TV will automatically tune to the selected programme when it starts.

REC

Timer Programming.

Press to display detailed information of the selected programme (if available).

2. Press EPG button or EXIT button again

to switch off EPG and return to normal TV viewing.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 17 2013-5-3 11:26:16

Page 20

Basic Features

Teletext (ATV mode)

Teletext is a free service broadcast by some TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. Using the Teletext control buttons you can view pages of information that are listed in the teletext index.

To Turn on Teletext Function

Make sure the TV channel you are watching transmits teletext.

“No Teletext” sign will show on the screen if teletext is not available.

In ATV mode, press the Teletext mode. Press the

TTX button to enter

INDEX button to

display the index page.

Press the

TTX button once to exit and the

TV will return to the channel you were watching.

To select a page of text

Find the number of the page in the index and enter it using the 0-9 buttons. The number of the page will appear on the top left corner of the screen.

The page counter will search for your page. When it finds it, the page will be displayed.

To move to the next page of text, press the button.

To move to the previous page, press the button.

To return to the index page, enter the “100” by using the 0-9 buttons or press the

INDEX

button.

Mix

To view a page of text while watching a TV programme, press the

TTX button twice.

The text will be superimposed over the TV programme.

Double height text

If you have difficulty reading the text on the TV you can double the height of the text.

Press the

SIZE button. The top half of the

page will be displayed in double height text.

Press the

SIZE button again. The bottom

half of the page will be displayed in double height text.

Press the

SIZE button again to return to the

full page.

Page HOLD

If the page of text you have selected contains subpages, these subpages will automatically be displayed in order with a delay to allow you to have enough time to read the page.

To stop the movie to the next sub page, press the

HOLD button.

To continue moving through the sub pages, press the

Alternative: Press the

HOLD button again.

SUBPAGE button, and

then use the 0-9 buttons to enter a 4-digit page number.

To Reveal Information

Press the

REVEAL button to reveal

concealed information (quiz answers etc.).

Press the

REVEAL button again to conceal

the information again.

Fasttext

At the bottom of the teletext screen is a row of subject headings in red, green, yellow and blue.

The remote control has a row of colour buttons corresponding to the row of coloured subjects on the screen.

Pressing one of the colour buttons will take you directly to the page corresponding to the subject heading.

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 18 2013-5-3 11:26:17

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

Page 21

Basic Features

Digital Teletext (DTV mode)

Digital teletext can access special digital teletext services and specific services which broadcast digital teletext. You will need to turn off Subtitle Function before using teletext.

1. In DTV mode, press the

TTX button to

display the teletext page.

Time Shift Function (DTV mode)

This function allows the TV to virtually record the live viewing broadcast programme.

Note: If the transfer rate of the USB storage device is too slow for recording or time shift function, a warning statement will be shown on the screen. If this happens, please upgrade your USB storage device.

2. Press the 0-9 buttons to select a page

number.

3. Follow the instructions on digital teletext and

move onto the next step by pressing OK,

, RED, GREEN, YELLOW, BLUE or 0-9

buttons etc.

4. To change digital teletext service, select a

different service by pressing the 0-9 buttons or the

buttons.

Alternative: You may press the RED button to the information when you see a

TTX button to display the teletext

red logo

displayed on the screen (e.g. BBC).

5. Press the

TTX button to exit.

programme. It will soon turn to normal.

 Time Shift Mode and Recording functions

may not work if the signal strength is weak.

 Stop the time-shift function before switching

to another input source.

During normal TV viewing, you may press the TIMESHIFT button to virtually pause the live viewing broadcast programme if you want to go out for a while (e.g. going to the bathroom / kitchen). “ II “ will show on the screen.

When you have returned, press the

button to display the PVR Time Shift progress bar and then press the

buttons to select “ ” on the

bar. Press the OK button to play the missed broadcast programme. “

” will show on the

screen.

The video and sound may have a little bit of delay or be out-of-sync for a few seconds when the unit starts to playback the missed broadcast

00:00:06

00:01:36

Pause FB FF Prev. Next Stop

Available Time 345:14:08 / 345:15:44

The ‘PVR Time Shift Progress Bar’

1 Indicates the status of the currently

displayed video (

/ / / )

2 Indicates the time lagging behind

the live broadcast (PVR reviewing)

3 Indicates the available recording

time on your USB storage device

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 19 2013-5-3 11:26:18

Page 22

Basic Features

Time Shift Function (DTV mode)

Using the Remote Control

You can shift playback to any point of the virtually recorded programme. Press the TIMESHIFT button to display the PVR Time

 Press the button to jump about 10% forward.

 Press the

Shift progress bar again.

TIMESHIFT

During playback, press the a still screen.

When playing,

 Press the / x 8 / x 16.

 During fast forward / fast backward state, press the button to return to normal playback.

button repeatedly to speed up x 2 / x 4

TIMESHIFT button to display

 During playback, press the button to display a still screen and then press the playback.

 During fast forward / fast backward state, press the button to return to normal playback.

OK /

If you want to exit the PVR Time Shift progress bar and return to the current live broadcast, press the OK / and then press the

Recording DTV Programme onto a USB Storage Device

Use this function to record the DTV programme you are watching on the main screen and save it for future viewing. The recording from timer programme or direct recording may have a little bit of delay when it starts to record the broadcast programme.

Please make sure the USB device is inserted. If not, a warning message will pop up.

1. Press the

programme that you are currently watching.

the

Recorded Time : 00 : 00 : 47 Available Time: 3837 Minute 16 QVC A Traditional Christ

REC button to record the

To display the recording information, press

REC button.

Recording

button to jump about 10% back.

button again to resume

button

button to confirm.

 If a hard disk is used, make sure its mains

adapter is connected to the mains supply.

 If a USB hub is used, make sure its mains

adapter is connected to the mains supply as the total current consumption may exceed 500mA.

 The maximum supported storage space of the

hard disk is 1 TB.

 The file system only supports FAT32 format.

 If you want to store the video streaming of a DTV

programme, the transfer rate of the USB storage device must not be less than 5MB/s, otherwise the picture and sound of the programme will be affected and a warning statement will be shown on the screen. If this happens, please upgrade your USB storage device.

 The TV screen will be blank temporarily as it will

take time to start up and stabilise the connected hard disk. This is normal and the starting time may vary depending on the brand and the memory size of the connected hard disk.

 Disconnect the USB storage device if it is not in

use.

2. Press the

disk is full.

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 20 2013-5-3 11:26:19

Stop button to stop recording.

Recording will stop automatically when the

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

Page 23

Basic Features

Timer Programming

This function is used for scheduled recording.

The recording from timer programme or direct recording may have a little bit of delay when it starts to record the broadcast programme.

Please make sure the USB device is inserted. If not, a warning message will pop up.

1. Press the EPG

button on the remote control.

The EPG menu will appear.

PROGRAM GUIDE

26 Dec 2008 10:00 - 26 Dec 2008 10:25 Big Cook Little Cook

Penguin: Cookey series with Big Cook Ben and foot-high Little Cook Small. Ben comes in to the cate wearing flippers and a mask he’s found in the fancy dress box. [AD,S]

009 BBC FOUR

071 CBeebies

081 BBC Parliament

087 Community

301 301

302 302

PrevDate NextDate Schedule Reminder

Move

2. Press the

10:00 Big Cook Little Cook

10:25 Bob the Builder

10:40 Me Too!

11:00 Something Special

11:15 Doodle Do

11:35 Our Planet

(REC) button on the remote

26 Dec 2008 10:21:43

[Children’s]

Rec: Record OK: Display EXIT: Exit

control while on the selected programme, the Scheduled Record menu will be displayed. Press the

buttons to select

the settings in the RECORD menu for the Frequency, Channel, Start time, and End time.

Scheduled Record - Group 1

Setting Status

Setting Is Not In Use

Start time (for Mode Once, Daily, Weekly, Weekday) Press the

buttons to adjust the

start time.

End time (for Mode Once, Daily, Weekly, Weekday) Press the

buttons to adjust the

end time.

3. After finishing all the recorder adjustments,

press the Save button to confirm your settings.

4. The Scheduled Record Setting List will

then be displayed with your preset reminders shown.

Scheduled Record Setting List

Scheduled Record

Function

Delete One Delete All

Hot Key

Move Up

Move Down

Select

Return

Exit

EXIT

Standby

Group

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Frequency

25 Dec 2008 Thu.

10:03

Off

Off Off Off Off Off Off Off Off Off Off Off Off Off Off Off

Channel

Date

Start Time

Duration

5. Press the EXIT button to exit EPG.

 When the preset time is reached, the TV will start

recording automatically.

 If a programme recording starts when the TV is in

standby mode, the LED indicator will alternatively flash red and blue.

Frequency Off

Hot Key

EXIT

Move Up

Move Down

Adjust

Select

Return

Exit

Channel

Start Time

End Time

1 BBC ONE

2008-12-25

1 0 : 0 5

2008-12-25

1 0 : 1 5

Save

Frequency

Press the

buttons to select the frequency

(Off/Once / Daily / Weekly / Weekday).

Channel

Press the OK button and then press the buttons to select the channel that you want to record.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 21 2013-5-3 11:26:20

Page 24

Basic Features

Play Recorded Programme

You can play a recorded programme from the recorded programme list or from a USB Storage Device.

1. Press the SOURCE button on the top of the

TV or the SOURCE button on the remote

control then press the the USB mode and then press the OK

button.

2. Press the

buttons to select MOVIE and

then press the OK button.

Photo Music Movie Text

3. Press the

buttons to select your storage

device and then press the OK button.

Movie

USB1

buttons to select

Play Recorded Programme

Animals.AVI

FileName VideoCodec : Resolution Bitrate :

MPEG4 640 x 480 4158120 bps

AudioCodec :

SampleRate :

Channel :

00 : 05 : 1300 : 00 : 22

MP3

44100 Hz

Quick Menu

6. Press the OK button or the DISPLAY button

to display the function bar. Press the buttons and then press the OK button to select the function: Pause / Prev. / Next / FB / FF / Stop / Quick Menu (Repeat / Encode Type).

7. Press the EXIT button to return to the

previous menu.

Picture management (ATV / DTV Mode)

Move

Change Page OK Selete Quick Menu EXIT Return

4. Press the

buttons to select the “

usbrecord ” folder and then press the OK button.

Movie

USB1/Movie

AITEMP

MY PVR

Movie

Music

Photo

Text

LE32G

Move

Change Page OK Selete Quick Menu EXIT Return

5. Press the

programme and then press the

1/1

buttons to select your recorded

button to

view.

1. Press the MENU button to display the

main menu. Press the

buttons to select

Picture in the main menu, then press the or OK button, it will highlight the first option.

2. Press the

buttons to select the option you

want to adjust in Picture menu.

3. Press the

buttons to change the

following settings.

TIPS:

 You can change the value of brightness,

contrast, sharpness and saturation when the picture is in Personal mode.

 You can press P.MODE button on the

remote control to change the Picture Mode directly.

Picture Mode

Brightness Contrast Sharpness Saturation Hue Colour Temp Aspect Ratio

Move Adjust MENU: Return EXIT: Exit

Picture

Standard

16:9

50 50 50 50

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 22 2013-5-3 11:26:21

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

Page 25

Basic Features

Picture management

Picture Mode

Allows the selection of a picture-enhancement technical from among the following options: Dynamic / Standard / Mild / Personal.

Brightness

This item can adjust the optical fiber output of the entire picture; it will affect the dark region of the picture.

Contrast

This item can adjust the highlight intensity of the picture, but the shadow of the picture is invariable.

Sharpness

This item can adjust the peaking in the detail of the picture.

Saturation

This item can adjust the saturation of the colour based on your own like.

Hue

This item may use in compensating colour changed with the transmission in the NTSC code.

Colour Temp

This item can increase or reduce warm colour of the picture personally (red), and the cold colour (blue) according to your like. The choice of Cold, that means it will increase the blue tone for the white. But choosing the Warm, it will increase the red colour for the white.

Aspect Ratio

Allows you to watch the screen in various picture formats: Auto / 4:3 / 16:9 / Zoom1 / Zoom2.

Advanced Settings

 Noise Reduction: Reduces the noise level of

the connected device (Medium / Strong / Off / Weak).

 Dynamic Contrast: Adjusts the dynamic

contrast (Medium / Strong / Off / Weak).

4. Press

the EXIT button to exit menu.

Sound management

1. Press the MENU button to display the main

menu. Press the in the main menu, then press the button, it will highlight the first option.

2. Press the

want to adjust in Sound menu.

3. Press the

buttons to change the

following settings.

TIPS:

 You can change the value of treble and

bass when the sound is in Personal mode.

 You can press the S.MODE button on the

remote control to change the Sound Mode directly.

Sound Mode

Treble Bass Balance EQ Setting AVL DTS TruSurround SPDIF

Move Adjust MENU: Return EXIT: Exit

Sound Mode:

Allows the selection of an audio-enhancement technical from among the following options: Standard, Music, Movie and Personal. You can change the value of Treble and Bass when the sound is in Personal mode.

Treble

Controls the relative intensity of higher-pitched sounds.

Bass

Controls the relative intensity of lower-pitched sounds.

Balance

Adjusts the relative volume of the speakers in a multiple speaker system.

EQ Setting Allows the selection of an equalizer mode: Off

/ Rock / Pop / Jazz / User. You can change the EQ value under User mode.

AVL

Selects to turn On/Off Audio Volume Leveler.

DTS TruSurround

This creates a feeling

fitted to your TV when switched on.

buttons to select Sound

or OK

buttons to select the option you

Sound

Standard

On On

PCM

0 0 0

of having surround sound

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 23 2013-5-3 11:26:22

Page 26

Basic Features

Sound management (ATV / DTV Mode)

Use the WX buttons to choose between On or Off. For DTS patents, see http://patents.dts.com.

Manufactured under license from DTS Licensing Limited. DTS, and

registered

trademarks, and DTS TruSurround is a

trademark of DTS, Inc. © DTS, Inc. All Reserved.

SPDIF Mode

Select the digital audio output mode: Auto / Off / PCM.

Audio Description

Selects to turn On/Off Audio Description.

Stereo / Dual Sound Reception (ATV Mode)

When a programme is selected, press the NICAM button to display the sound information for the selected station.

Brodcast On Screen Display

Mono

Stereo

Dual DUAL I, DUAL II, DUAL I+II

Mono sound selection

If the stereo signal is weak in stereo reception, you can switch to mono by pressing the NICAM button. In mono reception, the clarity of sound is improved. To switch back to stereo, press the NICAM button again.

Language selection for dual language broadcast

If a programme can be received in two languages (dual language), you can swith to DUAL I, DUAL II, DUAL I+II or Mono by pressing the NICAM button repeatedly.

DAUL I

DAUL II

DAUL I+II

PLEASE NOTE

DTS TruSurround HD must be switched off to change

Sound Mode and EQ settings. Adjusting any picture or sound settings will automatically change the mode to Personal. If you wish to reset all picture and sound adjustments:MENU>Setup>Reset

the Symbol together are

Rights

Mono

STEREO

Sends the primary broadcast language to the loudspeakers

Sends the secondary broadcast language to the loudspeakers

Sends the primary and secondary broadcast languages to the loudspeakers

Channel management (ATV / DTV Mode)

Auto Scan

Use this to automatically find and store all available channels. This is normally recommended if some channels have been added or removed by the broadcaster or you have moved house.

1. Press the MENU button to display the

main menu. Press the Channel in the main menu, then press the or OK button, it will highlight the first option.

Auto Scan

Manual Scan Channel Edit Common Interface Signal Information

Move OK: Select MENU: Return EXIT: Exit

2. Press the

buttons to select Auto Scan

and then press the OK button to enter submenu.

Country

Mode Start

Move Adjust MENU: Return EXIT: Exit

3. Press the

buttons to navigate the

menu and change the settings.

Country

Selects the country where you will operate the TV.

Mode

Selects the auto scan mode: DTV+ATV/DTV/ ATV. (DTV mode)

Start

Press the OK button to start auto tuning.

buttons to select

Channel

Auto Scan

DTV+ATV

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 24 2013-5-3 11:26:22

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

Page 27

Basic Features

Channel management (ATV / DTV Mode)

Auto Scan

Scanning CH34

Digital Channels Found: DTV :10 Radio :0 Data:0

Analog Channels Found: 0

MENU: Skip EXIT: Exit

If you stop the tuning before it has finished, the TV will report a no signal error. This is normal because all previous channel memory has been cleared before tuning is carried out.

Manual Scan (DTV Mode)

Allows you to make manual fine tuning adjustments to the channel under DTV mode.

1. Press the MENU button to display the

main menu. Press the

buttons to select

Channel in the main menu, then press the or OK button, it will highlight the first option.

Manual Scan (ATV Mode)

Allows you to make manual fine tuning adjustments if the channel reception is poor under ATV mode.

1. Press the MENU button to display the

main menu. Press the Channel in the main menu, then press the

buttons to select

or OK button, it will highlight the first option.

Auto Scan

Manual Scan

Channel Edit Common Interface Signal Information

Move OK: Select MENU: Return EXIT: Exit

2. Press the

Channel

buttons to select Manual Scan

and then press the OK button. On the submenu, select Analog Manual Scan and then press the OK button.

Auto Scan

Manual Scan

Channel Edit Common Interface Signal Information

Move OK: Select MENU: Return EXIT: Exit

2. Press the

Channel

buttons to select Manual Scan

and then press the OK button. On the submenu, select Digital Manual Scan and then press the OK button.

Digital Scan

Start Frequency Strength

Move 0~9 Input MENU: Return EXIT: Exit

Digital Manual Scan

Adjust

CH21

474.00 MHz 0

Digital Scan

Press the

buttons to select the desired

channel.

Start

Press the

buttons to select Start and then

press the OK button to start tuning.

Analog Scan

Channel to Save Colour System Sound System AFC Start

Move 0~9 Input MENU: Return EXIT: Exit

Analog Manual Scan

Fine tune

420.25 MHz

CH001

Auto Auto

Off

Analog Scan

Displays the current frequency, press the buttons to change the frequency.

Channel to Save

Press the press the

buttons to select Channel to Save,

buttons to select channel number

you want to store.

Colour System

Press the press the

buttons to select Colour System,

buttons to select: Auto / PAL/SECAM.

Sound System

Press the press the

buttons to select Sound System,

buttons to select: DK/I / BG.

AFC

Press the

buttons to select AFC, press the

buttons to select On or Off.

Start

Press the

buttons to select Start, press the

buttons to start tuning.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 25 2013-5-3 11:26:23

Page 28

Basic Features

Channel management (ATV / DTV Mode)

Channel Edit (DTV mode)

1. Press the MENU button to display the

main menu. Press the

buttons to select

Channel in the main menu, then press the or OK button, it will highlight the first option.

Auto Scan Manual Scan

Channel Edit

Common Interface Signal Information

Move OK: Select MENU: Return EXIT: Exit

2. Press the

Channel

buttons to select Channel Edit

and then press the OK button to enter submenu.

Channel Edit

Channel Edit (ATV mode)

1. Press the MENU button to display the

main menu. Press the Channel in the main menu, then press the

buttons to select

or OK button, it will highlight the first option.

Auto Scan Manual Scan

Channel Edit

Common Interface Signal Information

Move OK: Select MENU: Return EXIT: Exit

2. Press the

Channel

buttons to select Channel Edit

and then press the OK button to enter submenu.

Channel Edit

Delete

Move OK: Select MENU: Return EXIT: Exit

Skip Move

Page

Delete

Press the RED button to delete the selected channel.

Skip

Press the GREEN button to select the channels that you want to skip when you are selecting channels. Press the GREEN button again to undo it.

Move

Press the BLUE button and then press the buttons to move to the selected channel. Press the BLUE or the OK button to confirm.

Delete

Move OK: Select MENU: Return EXIT: Exit

Skip Rename Move

Page

Delete

Press the RED button to delete the selected channel.

Skip

Press the GREEN button to select the channels that you want to skip when you are selecting channels. Press the GREEN button again to undo it.

Rename

Press the YELLOW button to rename the selected channel. Press the

buttons to select the

characters to represent the station name. Press the

buttons to move to the next character and then

press the OK button again to confirm the new name.

Move

Press the BLUE button and then press the buttons to move to the selected channel. Press the BLUE or the OK button to confirm.press the buttons to select: Auto / PAL.

Favorite List

Press the FAV button to display the Favorite List, press the GREEN button to set the channel that you are currently watching as one of the favorite programmes. Press the RED button to

delete the

selected channel.

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 26 2013-5-3 11:26:24

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

Page 29

Basic Features

Channel management (ATV / DTV Mode)

Common Interface (DTV mode)

To view the module information.

1. Press the MENU button to display the

main menu. Press the Channel in the main menu, then press the or OK button.

2. Press the

buttons to select Common

Interface and then press the OK button.

buttons to select

Common Access Module

Auto Scan Manual Scan Channel Edit

Common Interface

Signal Information

Move OK: Select MENU: Return EXIT: Exit

Channel

3. A Common Interface main menu will pop up.

Press the

buttons to select the items and

press the OK button to confirm.

Viaccess Conditional Access Main Menu

1. Consultation

2. Settings

3. Upgrade

Press ‘OK’ to confirm, ‘EXIT’ to quit

Move OK: Select MENU: Return EXIT: Exit

Common Interface

4. Press the EXIT button to exit the menu.

The common interface allows the use of a Common Access Module to enable you to view scrambled (pay to view) services. These services are provided by TopUp TV (UK only) and others. The Common Access Module and viewing card can be obtained from the service provider.

Do not repeatedly insert or remove the Common Access Module as this may damage the interface and cause a malfunction.

To insert the Common Access Module

1. Before you insert the Common Access Module, ensure

that the TV is switched off and the viewing card is inserted in accordance with the Service Provider’s

instructions.

2. Insert the Common Access Module into the slot. Flip

the Common Access Module to another side and try again if you feel resistance.

3. Switch the TV on.

To remove the Common Access Module

1. Before you remove the Common Access Module,

ensure that the TV is switched off.

2. Pull the Common Access Module from the slot.

3. Switch the TV on.

Signal Information (DTV mode)

1. Press the MENU button to display the

main menu. Press the

buttons to select

Channel in the main menu, then press the or OK button.

2. Press the

buttons to select Signal

Information and then press the OK button to view the Signal Information..

This feature is not available in all country.

Signal Information

South Yorkshire.

CH22

482.00 MHz

84 QAM

96 49

MENU: Return EXIT: Exit

CI (Common Interface)

Allows the Common Access Module to be

inserted and access the content that has been encrypted.

Network Name Channel Frequency Modulation Strength Quality

3. Press the EXIT button to exit the menu.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 27 2013-5-3 11:26:26

Page 30

Basic Features

Lock System management

1. Press the MENU button to display the main

menu. Press the System in the main menu, then press the

or the OK button, it will highlight the first

option.

2. Use the 0-9 buttons to input a 4-digit

password to enter the Lock System menu.

3. Press the

want to adjust in Lock System menu.

4. Press the

following settings.

Enter Password

Enable Channel Locks Parental Rating Lock Keypad New Password Clear Lock

Move 0~9: Input MENU: Return EXIT: Exit

Default password “0000”.

If you change the password, be sure to remember the new password! If you forget the new password, press the master password“8899”.

Enter Password

To access the Lock System menu, you must enter the password. Enter the default password “0000” for the first time use.

Enable

The lock system is designed to prevent accidental returning of the TV/losing channels and prevent children watching unsuitable programme.

The Lock System must be set to On for this function to operate. If the Lock System is set to On, a valid password must be entered when you access Auto Scan / Manual Scan / Channel Edit /First Time Setup.

Channel Locks

Channel Locks is designed to prevent children watching unsuitable programmes. When a channel is blocked, a valid password must be entered.

Parental Rating

This function allows you to set up blocking schemes to block specific channels and ratings. Press the

buttons to select an age rating:

None, 4-18.

buttons to select Lock

buttons to select the option you

buttons to change the

Lock System

_ _ _ _

Off

None

Off

_ _ _ _

Lock System management

Lock Keypad

Key Lock is designed to prevent children from pressing the buttons on the TV. The Lock System must be set On for this function to operate.

New Password

Use the 0-9 buttons to input the old password and then input the new 4-digit password. Re-enter new password for confirmation.

Clear Lock

Reset all the lock settings to the factory defaults.

5. Press the EXIT button to exit the menu.

Setup management

OSD Language

1. Press the MENU button to display the main

menu. Press the in the main menu, then press the

OK button, it will highlight the first option.

2. Press the Language and then press the

to select your desired on-screen display language.

OSD Language

Audio Languages Subtitle Teletext Blue Screen Mode Setting Time Settings PVR Settings

Move Adjust MENU: Return EXIT: Exit

3. Press the EXIT button to exit the menu.

buttons to select Setup

buttons to select OSD

buttons

Setup

English

Home Mode

or the

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 28 2013-5-3 11:26:26

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

Page 31

Basic Features

Setup management

Audio Languages (DTV Mode)

1. Press the MENU button to display the main

menu. Press the in the main menu, then press the

OK button, it will highlight the first option.

2. Press the Languages and then press the OK button.

buttons to select Setup

or the

buttons to select Audio

Mode

Subtitle Primary Language Subtitle Secondary Language Hearing Impaired

Move Adjust MENU: Return EXIT: Exit

Subtitle

English English

Off

OSD Language

Audio Languages

Subtitle Teletext Blue Screen Mode Setting Time Settings PVR Settings

Move MENU: Return EXIT: Exit

3. Press the

buttons to select your desired

Setup

OK: Select

Audio Primary Language. Press the and then press the

English

Home Mode

button

buttons to select your

desired Audio Secondary Language.

Audio Primary Language

Audio Secondary Language

Move Adjust MENU: Return EXIT: Exit

Audio Languages

English

4. Press the EXIT button to exit the menu.

Subtitle (DTV Mode)

1. Press the MENU button to display the main

menu. Press the in the main menu, then press the

buttons to select Setup

or the

OK button, it will highlight the first option.

2. Press the

buttons to select Subtitle and

then press the OK button to enter sub-menu.

Mode:

Selects to turn On/Off subtitle language.

Subtitle Primary Language

Press the

buttons to select your desired

subtitle primary language.

Subtitle Secondary Language

Press the

buttons to select your desired

subtitle secondary language.

Hearing Impaired

Press the

buttons to turn On/Off hearing

impaired.

3. Press the EXIT button to exit the menu.

Teletext

1. Press the MENU button to display the main

menu. Press the in the main menu, then press the

buttons to select Setup

or the

OK button, it will highlight the first option.

2. Press the

buttons to select Teletext and

then press the OK button.

3. Press the

Digital Teletext Language. Press the and then press the

buttons to select your desired

button

buttons to select your

desired Decoding Page Language.

Digital Teletext Language

Decoding Page Language

Teletext

English

West EUR

OSD Language Audio Languages

Subtitle

Teletext Blue Screen Mode Setting Time Settings PVR Settings

Move MENU: Return EXIT: Exit

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 29 2013-5-3 11:26:27

Setup

OK: Select

English

Home Mode

Move Adjust MENU: Return EXIT: Exit

4. Press the EXIT button to exit the menu.

Page 32

Basic Features

Setup management

Blue Screen

1. Press the MENU button to display the main

menu. Press the in the main menu, then press the

buttons to select Setup

or the

OK button, it will highlight the first option.

2. Press the

and then press the

buttons to select Blue Screen

buttons to select On /

Off.

OSD Language Audio Languages Subtitle Teletext

Blue Screen

Mode Setting Time Settings PVR Settings

Move Adjust MENU: Return EXIT: Exit

Setup

English

Home Mode

3. Press the EXIT button to exit the menu.

Mode Setting

1. Press the MENU button to display the main

menu. Press the in the main menu, then press the

buttons to select Setup

or the

OK button, it will highlight the first option.

2. Press the

and then press the

buttons to select Mode Setting

buttons to select your

desired mode: Home Mode/Store Mode.

 Home Mode: Viewing at home.

 Store Mode: For store demo, the brightness

is higher than home mode.

Time Settings

1. Press the MENU button to display the main

menu. Press the in the main menu, then press the

buttons to select Setup

or the

OK button, it will highlight the first option.

2. Press the

buttons to select Time

Settings and then press the OK button.

OSD Time

Sleep Timer Auto Sleep Time Zone Time

Move Adjust MENU: Return EXIT: Exit

Time Settings

10 seconds

Off

4 hours

OSD Time

Displays time of the on-screen menu: 10s/20s/30s/60s/Off.

Sleep Timer

Press the

buttons to select a period of time after which the TV automatically switches to standby mode: Off/5/15/…/120/240mins.

Auto Sleep

The unit will automatically switch to standby mode 3/4/5 hours after the last time the remote control was used. If you want to operate the TV for a long period of time, turn off the auto standby function.

Time Zone

Selects your desired Time Zone city.

OSD Language Audio Languages Subtitle Teletext Blue Screen

Mode Setting

Time Settings PVR Settings

Move Adjust MENU: Return EXIT: Exit

Setup

English

Home Mode

Select Region

Lisbon GMT London GMT Amsterdam GMT+1 Berlin GMT+1 Beograd GMT+1 Budapest GMT+1 Copenhagen GMT+1

Move OK: Select MENU: Return EXIT: Exit

Time Settings

3. Press the EXIT button to exit the menu.

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 30 2013-5-3 11:26:28

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

Page 33

Basic Features

Setup management

Time

The clock is set automatically when receiving a digital signal or you can set it manually.

Auto Sync

Date Time

Auto Sync

Date Time

Move MENU: Return EXIT: Exit

Adjust

Move MENU: Return EXIT: Exit

Time

Adjust

01 Jan 2010

22:33:11

Time

01 Jan 2010

22:33:11

3. Press the EXIT button to exit the menu.

PVR Settings

1. Press the MENU button to display the main

menu. Press the in the main menu, then press the

buttons to select Setup

or the

OK button, it will highlight the first option.

2. Press the

buttons to select PVR Settings

and then press the OK button.

3. Press the

buttons to select the following

PVR File System options and then press the

OK button.

File Manager

Select File Manager to display the recorded programme list, press the

buttons to select

the recorded programme and then press the OK

button to view.

File Manager

Scheduled Record

Standby

Device List

Select Device List to check the information of the connected USB storage device for PVR. Press the RED button to format the selected USB device.

Device List

Available Space

Format

Hot Key

EXIT

Format

Move Up

Move Down

Select

Return

Exit

Device

USB1

1188 MB FAT32

File System

Scheduled Record

Select Scheduled Record to view the scheduled recordings list.

Scheduled Record Setting List

Scheduled Record

Function

Delete One Delete All

Hot Key

Move Up

Move Down

Select

Return

Exit

EXIT

Standby

Group

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Frequency

25 Dec 2008 Thu.

10:03

Off

Off Off Off Off Off Off Off Off Off Off Off Off Off Off Off

Channel

Date

Start Time

Duration

4. Press the EXIT button to exit the menu.

BBC ONE_Pinky and Perky_20081225_100524,is

BBC ONE_Pinky and Perky_20081225_100529,is

BBC ONE_Pinky and Perky_20081225_100530,is

Function

Replay

Delete One

Delete All

Zoom In/Out

Hot Key

Move Up

Move Down

Select

Return

Exit

EXIT

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 31 2013-5-3 11:26:29

Current Playing File Info

Channel Name

Program Name

Recorded Time

Total Time

BBC ONE

Pinky and Perky

25 Dec 2008 10:05

00:00:20

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

Page 34

Basic Features

Setup management

First Time Setup

1. Press the MENU button to display the main

menu. Press the in the main menu, then press the

buttons to select Setup

or the

OK button, it will highlight the first option.

2. Press the

buttons to select First Time

Setup and then press the OK button.

Teletext Blue Screen Mode Setting Time Settings PVR Settings

First Time Setup

OAD Reset

Move

3. Press the

Setup

Home Mode

MENU: Return EXIT: Exit

OK: Select

buttons to navigate the menu and change the settings. Then it will search automatically for analog and digital TV programmes.

4. Press the EXIT button to exit the menu.

OAD (Over Air Download)

1. Press the MENU button to display the main

menu. Press the in the main menu, then press the

buttons to select Setup

or the

OK button, it will highlight the first option.

2. Press the

buttons to select OAD and then

press the OK button.

Teletext Blue Screen Mode Setting Time Settings PVR Settings First Time Setup

OAD

Reset

Move

Setup

OK: Select

Home Mode

MENU: Return EXIT: Exit

Auto Download

The TV auto detects the latest firmware through the DTV signal and upgrades the firmware automatically. Selects to turn On/Off auto OAD download.

Manual OAD Download

Auto Download Off

Move

OAD

OK: Select

MENU: Return EXIT: Exit

4. Press the EXIT button to exit the menu.

Reset

1. Press the MENU button to display the main

menu. Press the in the main menu, then press the

buttons to select Setup

or the

OK button, it will highlight the first option.

2. Press the

buttons to select Reset and

then press the OK button.

Teletext Blue Screen Mode Setting Time Settings PVR Settings First Time Setup OAD

Reset

Move

3. Press the

Setup

Home Mode

MENU: Return EXIT: Exit

OK: Select

buttons to select Yes or No on the screen. All settings will be reset to factory defaults and the Setup menu will disappear.

3. Press the

download type.

Manual OAD Download

The TV auto detects the latest firmware through the DTV signal and allows you to accept or refuse the firmware upgrade service.

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 32 2013-5-3 11:26:31

buttons to select the over air

Teletext Blue Screen Mode Setting Time Settings PVR Settings First Time Setup OAD

Reset

Move

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

Setup

Reset

Yes No

OK: Select

Home Mode

MENU: Return EXIT: Exit

Page 35

Entertainment

Using the Features via USB Port

1. Switch off the TV before connecting any USB

storage device.

2. Connect your USB storage device to the USB

port of your TV.

3. Press the

the your TV and your USB storage device.

button on the top of the TV or

button on the remote control to turn on

4. Press the SOURCE button on the top of the TV or the SOURCE button on the remote

control to display the Source List. Use the

buttons to select USB and then press the

OK button to confirm.

Attention:

 Some versions of portable hard disk may

require more power than the TV USB socket can provide. To ensure correct operation please use power adapter for that device.

 If a USB hub is used make sure its mains

adapter is connected to the mains supply as the total current consumption exceed 500mA.

 The maximum supported storage space of the

hard disk is 1 TB.

 The file system only support FAT32 format.

 If you want to store the video streaming of

a DTV programme, the transfer rate of the USB storage device must not be less than 5MB/s, otherwise the picture and sound of the programme will be affected and a warning statement will be shown on the screen. If this happens, please upgrade your USB storage device.

 The TV screen will be blank temporarily as

it will take time to start up and stabilize the connected hard disk. This is normal and the starting time may vary depending on the brand and the memory size of the connected hard disk.

 Disconnect the USB storage device if it is not

in use.

Viewing Photo

1. Press the SOURCE button on the top of the

TV or the SOURCE button on the remote

control then press the

buttons to select

the USB mode and then press the OK button.

2. Press the

buttons to select Photo and

then press the OK button.

Photo Music Movie Text

3. Press the

buttons to select your storage

device and then press the OK button.

Photo

USB1

. . .

Move CH + / - Change Page OK Selete Quick Menu EXIT Return

4. Press the

USB1

buttons to navigate in the

1/1

picture folder and then press the OK button. If you want to select the specified photos, press the

buttons to select the picture

file and then press the OK button.

File format supported: JPG.

Photo

USB1

AITEMP MY PVR Movie Music Photo Text

. . .

LE32G

Move

CH + / - Change Page OK Selete Quick Menu EXIT Return

5. Press the

or OK button to view.

6/12

5_1366x768x24b.jpg

OK PLAY / PAUSE Previous / Next Rotate EXIT Back Quick Menu

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 33 2013-5-3 11:26:32

Date 2010-05-13 20:28:40 Resolution 1366x768

Page 36

Entertainment

6. Press the OK button or the DISPLAY button

to display the function bar: Play / Pause / Previous / Next / Rotate / Quick Menu (Interval Time / Repeat / Slideshow Effect / Background Music).

If this folder also contains music files, you can select a music track to play at the same time you view your photos.

7. Press the EXIT button to return to the

previous menu.

Listening to Music

1. Press the SOURCE button on the top of the

TV or the SOURCE button on the remote

control then press the

buttons to select

the USB mode and then press the OK button.

2. Press the

buttons to select Music and

then press the OK button.

Photo Music Movie Text

Some audio file formats will not be supported.

Supported File format: MP3.

5. Press the or OK button to start to play.

Music

USB1/Music/Call Me Maybe.mp3

Call Me Maybe.mp3

Good Time.mp3

Move

6. Press the

CH+/- FileList OK Selete Quick Menu EXIT Return

1/1

Call Me Maybe.mp3 1/2

Title

Call Me Maybe

Artist

Carly Rae Jepsen

Album

Call Me Maybe Track Year

2012-02-27 Date

2013-02-01 FileSize

3.9MB

00 : 00 : 22

00 : 03 : 13

buttons and then press the OK

button to select the function: Play / Previous / Next / FB / FF/ Stop / Quick Menu (Repeat).

7. Press the EXIT button to return to the

previous menu.

Viewing Movies

1. Press the SOURCE button on the top of the

TV or the SOURCE button on the remote

control then press the

buttons to select

the USB mode and then press the OK button.

2. Press the

buttons to select Movie and

then press the OK button.

3. Press the

buttons to select your storage

device and then press the OK button.

Music

USB1

Move

4. Press the

Change Page CH+/- Plaly OK Selete Quick Menu EXIT Return

buttons to navigate in the

00 : 00 : 00

Title Artist Album Track Year Date FileSize

00 : 00 : 00

music folder and then press the OK button.If you want to select the specified music, press the

buttons to select the music file and

then press the OK button.

Music

USB1/Music

AITEMP

MY PVR

Movie

Music

Photo

Text

LE32G

Move

Change Page CH+/- Plaly OK Selete Quick Menu EXIT Return

1/1

00 : 00 : 00

Title Artist Album Track Year Date FileSize

00 : 00 : 00

Photo Music Movie Text

3. Press the

buttons to select your storage

device and then press the OK button.

Movie

USB1

Move

Change Page OK Selete Quick Menu EXIT Return

4. Press the

buttons to navigate in the

movie folder and then press the OK button. If you want to select the specified movie, press the

buttons to select the movie file and

then press the OK button.

Some audio file formats will not be supported.

Supported File format: MPEG 1/2.

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 34 2013-5-3 11:26:33

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

Page 37

Entertainment

Movie

USB1/Movie

AITEMP

MY PVR

Movie

Music

Photo

Text

LE32G

Move

Change Page OK Selete Quick Menu EXIT Return

1/1

5. Press the or OK button to view.

Animals.AVI

FileName VideoCodec : Resolution Bitrate :

MPEG4 640 x 480 4158120 bps

AudioCodec :

SampleRate :

Channel :

00 : 05 : 1300 : 00 : 22

MP3

44100 Hz

Quick Menu

6. Press the OK button or the DISPLAY button

to display the function bar. Press the buttons and then press the OK button to select the function: Pause / Previous / Next / FB / FF / Stop / Quick Menu (Repeat / Encode Type).

7. Press the EXIT button to return to the

previous menu.

My Text

1. Press the SOURCE button on the top of the

TV or the SOURCE button on the remote

control then press the

buttons to select

the USB mode and then press the OK button.

2. Press the

buttons to select Text and then

press the OK button.

4. Press the buttons to navigate in the text folder and then press the OK button. If you want to select the specified text file, press the

buttons to select the text file and then

press the OK button.

Text

USB1/Text

AITEMP

MY PVR

Movie

Music

Photo

Text

LE32G

Move

Text

USB1/Text/English Music .txt

English Music .txt

Move

5. Press the

1 Why are you so far from me? In my arms is where you ought to be.

2 How long will you make me wait? I don’t know how much more I can take.

3 (Chorus:) I missed you But I haven’t met you Oh but I want to How I do

4 Slowly counting down the days

Previous / Next

Change Page OK Selete Quick Menu EXIT Return

1/1

1 Why are you so far from me?

In my arms is where you ought to be.

2 How long will you make me wait?

I don’t know how much more I can take.

3 (Chorus:)

I missed you

But I haven’t met you

Oh but I want to

How I do

4 Slowly counting down the days

or OK button to view.

0~9: Goto Page Quick Menu EXIT Return

1/12

6. Press the OK button or the DISPLAY button to display the function bar. Press the buttons and then press the OK button to select the function: Previous / Next / Goto Page / Quick Menu (Repeat / Background Music / Encode Type).

If this folder also contains music files,

you can select a music track to play at the

Photo Music Movie Text

same time you view your texts.

7. Press the EXIT button to return to the previous menu.

3. Press the

buttons to select your storage

device and then press the OK button.

Text

USB1

Move

Change Page OK Selete Quick Menu EXIT Return

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 35 2013-5-3 11:26:34

Page 38

Other Information

Specifications

TV Broadcasting PAL, B/G, D/K, I, SECAM, L/L’

Receiving Channels VHF (BAND I/III) - UHF (BAND U) - HYPERBAND

Number of Preset Channels 100

Channel Indicator On Screen Display

RF Aerial Input 75 Ohm (unbalanced)

Operating Voltage AC 100-240V~ 50/60Hz

Audio Nicam

Audio Output Power (WRMS.) (10% THD) 2 x 3 W

Panel Dimensions DxLxH (with foot) 165 x 517 x 356 mm

Weight (with foot) 3.4 kg

Panel Dimensions DxLxH (without foot) 46 x 517 x 321 mm

Weight (without foot) 3.1 kg

Energy Consumption Data EEI A

On Mode Power Consumption (W) 22W

Standby Mode (W) 0.5W

Maximum Power (W) 35W

Standby Mode After 4 Hours

Digital reception

MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Profile 1 - for UK

Object carousel support compliant with ISO/IEC 135818-6 and UK DTT profile - for UK

Frequency range: 474-850 MHz for UK models

170-862 MHz for EU models

Transmission standard: DVB-T. MPEG-2

Demodulation: COFDM with 2K/8K FFT mode

FEC: all DVB modes

Video: MP@ML, PAL, 4:3/16:9

Audio: MPEG Layer I&II 32/44.148kHz.

We apologise for any inconvenience caused by any minor inconsistencies in these instructions, which may occur as a result of product improvements and development.

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 36 2013-5-3 11:26:34

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

Page 39

Other Information

Plug replacement - UK and Ireland only

Should you need to replace the plug; the wires in the power cable are coloured in the following way:

Blue – Neutral ‘N’

Brown – Live ‘L’

As the colours of the wires in the power cable may not correspond with the coloured markings identifying the terminals in your plug, and proceed as follows:

The blue wire must be connected to the terminal that is marked with the letter N.

The brown wire must be connected to the terminal that is marked with the letter L.

If the power lead is damaged, it must be replaced by

Connect blue lead to ‘N’ Neutral

Connect brown lead to ‘L’ - Live

Energy label

This is called the product Fiche – the information needs to be presented in the following order, also this maybe in the form of a copy of the label, in colour or black and white – the label however must display all the information below:

 Supplier’s name or trade mark  Supplier’s model product model no.   The visible screen diagonal in centimetres and in inches  The on-mode power consumption  The annual energy consumption  The screen resolution in physical horizontal and vertical pixel count

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 37 2013-5-3 11:26:35

Page 40

Product Support

Trouble shooting

Image persistence - ghosting

Please note that ghosting may occur while displaying a persistent image (still or paused image). LCD TVs’ image persistence may disappear after a short time. Try turning off the TV for a while. To avoid this, do not leave the screen in still picture mode for extended periods.

No power

If your TV has no power, please check the power cord plug is connect to the mains power socket.

Poor picture

1. Have you selected the correct TV system?

2. Is your TV or house aerial located too close to a nonearthed audio equipment or neon lights, etc.?

3. Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial. Is the picture or teletext unrecognisable?

4. Check if you have entered the correct frequency.

5. Please retune the channels.

6. The picture quality may degrade when two devices are connected to the TV at the same time. In such a case, disconnect one of the devices.

Remote control - does not operate

Your TV no longer responds to the remote control. The batteries may be exhausted, if so you can still use the control buttons on the left side of the TV.

Input sources - can not be selected

1. If you cannot select an input source, it is possible that no device is connected.

2. Check the AV cables and connections if you have tried to connect a device.

Wrong OSD language

1. Select the language in the setup menu.

2. The language for the sound or subtitles on a DVD disc cannot be changed.

3. Multilingual sound and/or subtitles are not recorded on the DVD disc.

4. Try to change the sound or subtitles using DVD’s title menu. Some DVD’s do not allow the user to change these settings without using the disc’s menu.

No picture

1. No Picture means that your TV is not receiving a transmission. Have you selected the correct button on the remote control? Try once more. Also make sure the correct input source has been selected.

2. Is the aerial connected properly?

3. Are the plugs connected tightly to the aerial socket?

4. Is the aerial cable damaged?

5. Are suitable plugs used to connect the aerial?

6. If you are in doubt, consult your dealer.

No sound

1. Has the TV been set to mute? To cancel mute, press the “

” button, or increase the volume level.

2. Sound is coming from only one speaker. Is the balance set to one extreme?

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 38 2013-5-3 11:26:35

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

Page 41

Product Support

Supported formats

Media

Movie

Music

Photo

File Extension

Video Audio

MPEG1

.mpg/.dat/.vob

MPEG2 MPEG2

- - PMC Sample Rate: 8K ~ 48KHz

.mp3 -

.jpg

Disposal information

Instructions for waste disposal:

Format

MPEG Layer

MPEG 1/2

Layer 1/2/3 MP3)

Baseline JPEG

Progressive JPEG

Supported (Maximum resolution/Bit rate etc.)

1/2/3

Sample Rate: 8K ~ 48KHz,

Bit Rate: 64K ~ 320Kbps

W x H = 8192 x 8192 up to 77 Mega-pixel

Support format: 444/ 440/ 422/ 420/ Grayscale

Up to 4 Mega-pixel

Support format: 444/ 440/ 422/ 420/ Grayscale

Packaging and packaging aids are recyclable and should principally be recycled. Packaging materials, such as foil bag, must be kept away from children.

Information for Users on Disposal of old Equipment and Batteries (European Union only)

These symbols indicate that equipment with these symbols should not be disposed of as general household waste. If you want to dispose of the product or battery, please consider the collection systems or facilities for appropriate recycling.

Notice: The sign Pb below the symbol for batteries indicates that this battery contains lead.

Products

Battery

contains a small amount of mercury; please follow the local laws or regulations for disposal.

Information for Users in European Union Countries

This symbol on the product or on its packaging means that your electrical and electronic device should be disposed of at the end of its service life separately from your household wastes. There are separate collection systems for recycling in EU.

For more information, please contact the local authority or the dealer where you purchased the product.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 39 2013-5-3 11:26:35

Page 42

PRODUCT GUARANTEE

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 40 2013-5-3 11:26:36

Page 43

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 41 2013-5-3 11:26:36

Page 44

LE-28GBR-A HD 黑色（英国 SY13096）_IM V01.indd 42 2013-5-3 11:26:36

Bush LE-22GY14R Instruction manual

Specifications and Main Features

Frequently Asked Questions

User Manual