Page 1
Instruction Manual
CBAR7W
Page 2
Table of contents
Disposal information ...........................1
Safety information .............................2
Care & maintenance ............................2
DTS TruSurround ...............................2
Accessories included ...........................3
Overview of controls ............................3
Overview of remote .............................4
Remote battery usage ..........................4
Subwoofer connection ..........................4
TV Connections .................................5
Auxiliary connections ...........................6
Mains connection ..............................6
Standby mode ..................................6
General operation ..............................6
Switching inputs ..................................6
Adjusting the volume level. . . . . . . . . . . . . . . . . . . . . . . . .6
Sound effect presets ..............................6
Bass enhancement ...............................7
Mute function .....................................7
Sleep timer ........................................7
Adjusting the display brightness ..................7
Bluetooth operation ............................7
Pairing a Bluetooth device .........................7
Bluetooth status table ............................8
Controlling a paired device ........................8
Bluetooth notes ...................................8
Wall mounting the sound bar ....................9
Wall mounting advice .............................9
Troubleshooting ................................10
Technical specifications ........................10
Product Codes
CBAR7W
Disposal information
WEEE marking “Information for the
consumer” Disposal of your old product Your
product is designed and manufactured with
high quality materials and components, which
can be recycled and reused. When this crossed out
wheeled bin symbol is attached to a product it means
the product is covered by the European Directive
2002/96/EC. Please make yourself aware of the local
collection system for electrical and electronic
products. Please act according to your local rules and
do not dispose of your old products with your normal
household waste.
The correct disposal of your old product will help
prevent potential negative consequences for the
environment and human health.
This product complies with European low
voltage (2006/95/EC) and electromagnetic
compatibility (2004/108/EC) directives.
Page 1
Page 3
Safety information
Important – Please read these instructions fully before installation
Safety information
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE ANY COVER.
NO USER-SERVICEABLE PARTS INSIDE, REFER ANY
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK!
DO NOT OPEN!
• Please read this owner’s guide
• Please take the time to follow the instructions in
this owner’s guide carefully. It will help you set up
and operate your system properly and enjoy all of its
advanced features.
• Please save this owner’s guide for future reference.
• The product label is located on the back of the product.
• Heed all warnings - on the product and in the owner’s
guide.
• This product must be used indoors. It is neither
designed nor tested for use outdoors, in recreation
vehicles, or on boats.
• The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids, such
as vases, shall be placed on the apparatus.
• Do not use this product near a bathtub, washbowl,
kitchen sink, and laundry tub, in a wet basement,
near a swimming pool, or anywhere else that water or
moisture is present.
• Batteries, shall not be exposed to excessive heat such
as sunshine, fire or the like.
• Only use attachments/accessories specified by the
manufacturer.
• Unplug this apparatus during lightning storms or when
unused for long periods of time - to prevent damage to
this product.
• Refer all servicing to qualified service personnel
• Servicing is required when the apparatus has been
damaged in any way: such as liquid has been spilled or
objects have fallen into the apparatus; the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped -
• Do not attempt to service this product yourself.
• Opening or removing covers may expose you to
dangerous voltages or other hazards.
• To prevent risk of fire or electric shock, avoid
overloading wall outlets, extension cords, or integral
convenience receptacles.
• Use proper power sources - Plug the product into a
proper power source, as described in the operating
instructions or as marked on the product.
• The mains plug is used as the disconnect device, the
disconnect device shall remain readily accessible.
This symbol means that this unit is double
insulated. An earth connection is not required.
Care & maintenance
Important: Always unplug the appliance from the
power socket during cleaning and maintenance.
• Ensure the unit is switched off and unplugged from
any electrical outlet
• Wipe the case with a slightly moist lint free cloth
• Do not use any cleaning fluids containing alcohol,
ammonia or abrasives
• Do not spray an aerosol at or near the object
• Do not allow liquids to spill or objects to drop into any
openings
• Do not insert sharp items into speaker grills or any
other openings
• Always us the original packaging if it is necessary to
transport the unit at any time
• If the unit is used in a dusty environment, it may be
necessary to have the unit serviced at your local
dealer periodically. It is not advisable to allow large
deposits of dust to accumulate within the unit as it
may prevent adequate cooling. Similarly dust deposits
which become damp can sometimes lead to electrical
problems which may cause severe damage to the
delicate electronics within this unit.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any
use of such marks is under license
Page 2
Page 4
Functions & controls
Please familiarize yourself with the parts and accessories listed below
Accessories included
• 1 x CBAR7W
• 1 x Sub woofer
• 1 x Remote control
Overview of controls
• 1 x CR2025 battery
• 1 x Audio cable (Coaxial)
• 1 x Audio cable (Optical)
• 1 x Audio cable (RCA - 3.5mm)
• 1 x Audio cable (RCA - RCA)
• 1 x Instruction manual
54 6 7 8
15
16
1 WALL-MOUNT BRACKETS: Use
these brackets to fix the Sound
bar to a wall.
2 MAINS POWER CABLE: Connect
to a UK mains outlet.
3 DISPLAY: Indicates the current
status of the unit.
4 STANDBY touch button: Switch
on the Sound bar or switch to
STANDBY mode.
5 SOURCE touch button: Select an
audio source from TV, AUX, COAX,
BT or OPTICAL inputs.
6
PLAY/PAUSE touch button:
START or PAUSE Bluetooth
playback.
3
1
214
7 SKIP
8 VOLUME + / - touch buttons:
9 TV AUDIO INPUT (RCA): Connect
10 SERVICE PORT: This USB port is
11 AUX AUDIO INPUT (3.5mm):
/ touch button:
Skip previous & next buttons for
bluetooth playback.
Increase or decrease the output
volume.
the analogue audio output from a
TV or other audio source.
used ONLY for software updates.
Connect the analogue audio
output from an MP3 player or
similar using a 3.5mm audio
cable.
9
TV
TV
TV
L
AUX
L
10
11
R
R
R L
SERVICE
PORT
OPTC COAX
12 13
12 OPTICAL AUDIO INPUT: Connect
the digital audio output from a
TV, DVD or Blu-ray player.
13 COAXIAL AUDIO INPUT (RCA):
Connect the digital audio output
from a TV, DVD or Blu-ray player.
14 SUBWOOFER SPEAKER
TERMINALS : Connect to the
external subwoofer.
15 SPEAKER CABLE : Connect the
external subwoofer to the Sound
Bar.
16 SUBWOOFER
Page 3
Page 5
User instructions
Overview of remote
18
17
19
20
VOL +
-
B
-
21
VOL
22
28
27
26
B +
25
24
23
17
PLAY/PAUSE: START or PAUSE Bluetooth
playback.
18 SOURCE: Select an audio source from TV, AUX,
COAX, BT or OPTICAL inputs.
19 STANDBY: Switch on the Sound bar or switch to
STANDBY mode.
20 SKIP
: Skip to previous track for Bluetooth
playback.
21 VOLUME - / +: Increase or decrease the volume
output.
22 OPTION: Press and hold for 5 seconds to ‘Unpair’ a
connected Bluetooth device.
23 SLEEP: Activates the sleep timer function.
24 DIM: Press this button to adjust the display
brightness.
25 BASS - / +: Increase or decrease the bass output.
Remote battery usage
Using the remote for the first time
Before use, pull the tab out from the bottom of the
remote control. This allows the terminals contact with
the pre-installed battery.
Installing batteries in the remote
1: Push open the battery compartment on the bottom of
the remote control using a fingernail.
2: Insert a CR2025 battery into the space taking care to
match the + & - polarity symbols correctly.
3: Replace the battery compartment.
Disposal of batteries
Dispose of used batteries with regard to the recycling
regulations in your area. Do NOT short circuit batteries
or throw them into water, the general rubbish or in a
fire. Weak batteries can leak and damage the remote
control. Replace them in good time!
Subwoofer connection
1: Connect the speaker cable from external subwoofer
to the socket on back of the Sound bar. Take care to
match the cable with RED line to the RED socket and
the WHITE cable to the BLACK socket.
26 MUTE: Press to mute the sound output.
27 SKIP
: Skip to next track for Bluetooth playback.
28 SOUND EQ MODES: Press repeatedly to assign
different sound EQ modes: STANDARD, MOVIE,
MUSIC or NEWS.
Page 4
Page 6
TV
R
AUX
COAX OPTC
L
TV
R
AUX
COAX OPTC
L
TV
R
AUX
OPTC COAX
L
SERVICE
PORT
TV
R
AUX
COAX OPTC
L
TV
R
AUX
COAX OPTC
L
TV
R
AUX
OPTC COAX
L
SERVICE
PORT
TV
R
AUX
COAX OPTC
L
TV
R
AUX
COAX OPTC
L
TV
R
AUX
OPTC COAX
L
SERVICE
PORT
TV
R
AUX
COAX OPTC
L
TV
R
AUX
COAX OPTC
L
TV
R
AUX
OPTC COAX
L
SERVICE
PORT
TV
R
AUX
COAX OPTC
L
TV
R
AUX
COAX OPTC
L
TV
R
AUX
OPTC COAX
L
SERVICE
PORT
AUX
COAX OPTC
AUX
COAX OPTC
AUX
OPTC COAX
SERVICE
PORT
TV
R
AUX
COAX OPTC
L
TV
R
AUX
COAX OPTC
L
TV
R
AUX
OPTC COAX
L
SERVICE
PORT
TV
R
AUX
COAX OPTC
L
TV
R
AUX
COAX OPTC
L
TV
R
AUX
OPTC COAX
L
SERVICE
PORT
TV
R
AUX
COAX OPTC
L
TV
R
AUX
COAX OPTC
L
TV
R
AUX
OPTC COAX
L
SERVICE
PORT
TV
R
AUX
COAX OPTC
L
TV
R
AUX
COAX OPTC
L
TV
R
AUX
OPTC COAX
L
SERVICE
PORT
User instructions
TV Connections
1) Connecting a TV, DVD or GAMES CONSOLE using the
supplied RCA - RCA audio cable.
NOTE: Ensure that the TV PHONO connectors are
audio OUTPUTS and not audio INPUTS. If they are
INPUTS then use connection 4 instead of 1.
1: Connect one end of the RCA cable (supplied) to the
TV, DVD or CONSOLE audio output RCA sockets.
2: Connect the other end to the TV inputs on the side of
the Sound bar (9).
NOTE: Take care to match the RED plug to the RED
socket and the WHITE plug to the WHITE socket.
2) DIGITAL connection to a TV, DVD or Blu-ray player
using the supplied COAXIAL cable.
TV
TV
TV
L
L
R
R
L
R
SERVICE
PORT
AUX
AUX
AUX
COAX OPTC
COAX OPTC
OPTC COAX
TV
TV
TV
L
L
R
R
L
R
SERVICE
PORT
AUX
AUX
AUX
COAX OPTC
COAX OPTC
OPTC COAX
3) DIGITAL connection to a TV, DVD or Blu-ray player
using the supplied OPTICAL cable.
TV
TV
TV
L
L
R
R
L
R
SERVICE
S
PORT
AUX
AUX
AUX
COAX OPTC
COAX OPTC
OPTC COAX
1: Connect one end of the OPTICAL cable (supplied) to
the TV, DVD or Blu-ray OPTICAL audio output socket.
2: Connect the other end to the OPTC input on the side
of the Sound bar (12).
NOTE: You may need to activate PCM (Downmix)
on your source device EG:- TV, DVD or Blu-ray
player.
4) Connection to a TV using the supplied RCA - 3.5mm
audio cable.
R
R
R
SERVICE
PORT
COAX OPTC
COAX OPTC
OPTC COAX
TV
TV
TV
L
L
L
AUX
AUX
AUX
1: Connect the 3.5mm (small) end of the cable
(supplied) to the TV headphone 3.5mm audio output
socket.
2: Connect the other RED & WHITE ends to the TV
inputs on the side of the Sound bar (9), taking care to
match the RED plug to the RED socket and the WHITE
plug to the WHITE socket.
1: Connect one end of the RCA COAX cable (supplied)
to the TV, DVD or Blu-ray COAXIAL audio output RCA
socket.
2: Connect the other end to the COAX input on the side
of the Sound bar (13).
NOTE: You may need to activate PCM (Downmix)
on your source device EG:- TV, DVD or Blu-ray
player.
NOTE: In some cases the Sound bar volume
output is effected by the volume level on the TV.
In this case adjust the TV volume to increase the
audio output from the sound bar.
NOTE: If no sound can be heard from the sound
bar using this connection, you may need to check
your TV settings to enable the headphone socket
output.
Page 5
Page 7
TV
R
AUX
COAX OPTC
L
TV
R
AUX
COAX OPTC
L
TV
R
AUX
OPTC COAX
L
SERVICE
PORT
TV
R
AUX
COAX OPTC
L
TV
R
AUX
COAX OPTC
L
TV
R
AUX
OPTC COAX
L
SERVICE
PORT
User instructions
Auxiliary connections
Connecting an MP3 player
The below diagram shows the connection to an audio
device such as an MP3 player, using a 3.5mm audio
cable (not supplied).
TV
TV
TV
L
L
R
R
L
R
SERVICE
PORT
AUX
AUX
AUX
COAX OPTC
COAX OPTC
OPTC COAX
1: Connect one end of the 3.5mm audio cable to the
headphone output of your MP3 player.
2: Connect the other end to the AUX input (3.5mm
socket) on the side of the Sound bar (11).
Mains connection
Connecting mains power
1: Connect the attached mains plug to a UK mains
power supply outlet.
2: Switch the power outlet ON.
Standby mode
Standby mode
1: Press the STANDBY button (4 Unit & 19 Remote) to
wake the unit from STANDBY mode.
2: To enter STANDBY mode press either STANDBY
buttons (4 Unit & 19 Remote).
NOTE: As part of the power saving mode the unit
will enter STANDBY mode automatically after 20
minutes (approx) of no audio output.
General operation
Switching inputs
Follow the below steps to switch inputs between : TV,
Auxilliary, Coaxial, Bluetooth or Optical.
1: Ensure the Sound bar is powered ON. If not press the
STANDBY button (4) or remote (19).
2: Press the SOURCE button (5, 18) repeatedly until you
reach the required input mode.
Switching inputs (cont)
TV input: ..................................TV
Auxilliary input: ...........................AUX
Coaxial input: .............................COAX
Bluetooth input: ..........................BT
Optical input: .............................OPTC
NOTE: When switching inputs there will be a 5
second pause after selecting BT while the unit
scans for paired devices.
Adjusting the volume level
1:To increase the volume level press the VOLUME +
button (8 Unit or 21 Remote) repeatedly or press and
hold for fast adjustment.
BASS
2: To decrease the volume level press the VOLUME -
button (8 Unit or 21 Remote) repeatedly or press and
hold for fast adjustment.
Sound effect presets
1: During playback pressing the SOUND EQ button on
the remote control (28) repeatedly cycles through the
available sound modes.
Choose between :- STANDARD (STD), MOVIE, MUSIC
or NEWS.
MUSIC NEWSMOVIE
2: As you select a sound mode the corresponding name
appears on the display to indicate that sound mode
is active.
NOTE: The STANDARD sound mode when selected
does not show an icon on the display.
Page 6
Page 8
User instructions
Bass enhancement
1: To increase the bass level press the BASS (B)+ button
(25) repeatedly.
MUSIC BASS
2: To decrease the bass level press the BASS (B)- button
(25) repeatedly.
NOTE: The BASS levels range from -4 to +4.
Mute function
1: Pressing the MUTE button (26) on the remote will
temporarily silence the audio output. You will see
‘MUTE’ flash on the display to indicate the mute
function is active.
MUSIC BASS
2: Press the MUTE button again to resume the audio
output.
Sleep timer
The unit can be set to enter STANDBY mode after a
period of time.
1: During playback mode of either TV, COAX, OPTICAL or
AUX modes, press the SLEEP button (23) to enter the
timer settings.
2: Press the SLEEP button repeatedly to cycle through
the available time duration options of :- 5, 10, 15, 30,
45, 60, 90 minutes & OFF.
MUSIC BASS
Sleep timer (cont)
4: When the timer elapses the STANDBY mode will be
activated.
Adjusting the display brightness
1: Press the DIM. button (24) repeatedly to cycle through
the 3 brightness states LOW, MED & HIGH.
Bluetooth operation
Pairing a Bluetooth device
Before you can use the sound bar with your phone or
other bluetooth capable device you will need to pair
the device to the sound bar.
1: Press the SOURCE button (5, 18) repeatedly until you
see ‘BT’ appear on the display.
MUSIC BASS
2: When selected the ‘BT’ text on the display will flash
rapidly after 5 seconds while the unit tries to connect
to previously paired devices. If no devices are found
the ‘BT’ text will still flash but slowly to indicate it is
ready for pairing a new device.
3: Enable the Bluetooth function on your audio device
and search for a device labelled ‘BUSH CBAR7W’ in
the available list.
4: Select and enable pairing for the ‘BUSH CBAR7W’
device. If prompted for a password enter ‘0000’.
5: If pairing is successful the CBAR7W will beep and the
‘BT’ text will stop flashing.
6: If the connected device goes out of range, the sound
bar will attempt to connect for 2 minutes. When the
device comes into range the sound bar will reconnect
again automatically.
7: To remove the paired device using only the sound bar,
press and hold the OPTION button (22) on the remote
control. The ‘BT’ text will begin flashing slowly again.
3: When you have selected the required timer duration,
just leave all buttons untouched for 2 seconds and
the timer will begin the countdown.
Page 7
Page 9
User instructions
Bluetooth status table
‘BT’ state Reason
‘BT’ solid (no flash) • Connected
‘BT’ flash rapidly • Auto re-connecting with last
‘BT’ flash slowly • Pairing mode
Controlling a paired device
Once connected you can either use the controls on
the audio device to begin playback, skip tracks etc.
Or you can use the control buttons on the speaker
bar & remote.
1: The PLAY/PAUSE button (6 or 17) when pressed will
begin playback of the selected track on the audio
device. Press again to pause playback.
2: To skip to the next track press the SKIP
or 27).
3: To skip to the previous track press the SKIP
button (7 or 20).
4: Any further operations must be done from the audio
device.
paired device.
• If no connection can be
made inside 2 minutes
pairing mode will begin.
button (7
NOTE: the volume output is effected by the
volume level on the audio source EG: Phone or
laptop, so make sure that is set to about 70-80% (
not too loud to avoid distortion).
Bluetooth notes
• The operation range of bluetooth is approximately 10
meters (30 Feet). Any obstacles in the path between
devices may reduce this range.
• Only one Bluetooth device can be paired at a time.
• Not all Bluetooth devices are compatible.
Page 8
Page 10
User instructions
Wall mounting the sound bar
1: Align the Sound bar in the
chosen location. Use a
pencil to mark the drilling
positions 750mm apart.
NOTE: The Sound bar should be located at least
7.5cm below the bottom of the TV.
40”
3 inches (7.5 cm) or more
2: Drill holes as marked in
step 1.
NOTE: You will need to ensure the screws are long
enough to sufficiently grip the wall while allowing
5mm between screw head & wall.
4: Hook the Sound bar into the screws. For secure
mounting ensure the screw heads slide firmly into the
narrow part of the brackets.
Wall mounting advice
• In order to avoid damage to the equipment and
personal injury you should get a qualified person to
drill the fixing surface and fit the appropriate wall
fixings.
• Take care not to allow the main unit to fall while
attempting to hook onto the wall mount brackets.
• Before mounting, check the wall strength, if it is not
clear then consult relevant qualified personnel.
• When drilling into walls, always check that there are no
hidden wires or pipes etc.
• Make sure the screws & wall plugs are suitable for
supporting the unit.
3: Insert 2 screws (not
supplied) into the holes
and tighten. Take care to
leave 5mm between the
screw heads and the wall.
Page 9
Page 11
Troubleshooting & Maintenance
Troubleshooting
In the unlikely event of difficulties with your appliance please follow the trouble shooting guide below.
If the problem persists, contact the retailer if the machine is still under guarantee.
Customer helpline: 0870 600 3030
PROBLEM POSSIBLE SOLUTION
No Power • Ensure the mains plug is connected to a power supply, and is
No Sound • Make sure if playing from the AUX input, the external source has the
No response from the unit • Unplug the power cable for 1 minute then plug back in again.
Remote control does not work • Reduce the distance between the remote and main unit
Unit powers off after 20 minutes • This unit is designed to enter STANDBY mode automatically after 20
switched ON.
• Make sure there is power to the mains socket.
volume turned up and is playing a track.
• Make sure the volume is turned up.
• If using the digital coaxial or optical cable connection ensure the
source DIGITAL output is set to PCM, LPCM, PCM 2Ch stereo or PCM
downmix.
• Bluetooth device not paired. Check ‘Bluetooth operation’.
• Check the batteries are installed correctly.
• Replace the batteries
• Aim the remote directly at the Sound bar
MINUTES of inactivity. Press the STANDBY button to wake the unit.
Technical specifications
Amplifier
Power Output • 200W MAX
Frequency response • 20 Hz - 20KHz ± 3dB
Input sensitivity • 550 mV
Main unit
Power supply • 100-240V ~ 50-60Hz
Power consumption • 35W
Standby power consumption • ≤ 0.5W
Full range speaker drivers
Subwoofer
Dimensions • Soundbar: 930 x 90 x 60mm Sub woofer: 264 x 251 x 274mm
Cable length • 1.5m
Remote control
Battery • 1 x CR2025
Bluetooth
Bluetooth compatibility • EDR, A2DP, AVRCP
Bluetooth version • 2.1
Page 10
• Impedance: 4 Ohm, 52mm (2”)
• Frequency response: 250Hz ~ 20KHz
• Impedance: 8 Ohm, 156mm (6”)
• Frequency response: 35~250Hz
Page 12
Guarantee
PRODUCT GUARANTEE
This product is guaranteed against manufacturing defects for a period of
Year
This product is guaranteed for twelve months from the date of original purchase.
Any defect that arises due to faulty materials or workmanship will either be replaced,
refunded or repaired free of charge where possible during this period by the dealer from
whom you purchased the unit.
The guarantee is subject to the following provisions:
The guarantee does not cover accidental damage, misuse, cabinet parts, knobs or
consumable items.
The product must be correctly installed and operated in accordance with the instructions
contained in this manual.
It must be used solely for domestic purpose.
The guarantee will be rendered invalided if the product is re-sold or has been damaged by
inexpert repair.
Specifications are subject to change without notice.
The manufacturer disclaims any liability for the incidental or consequential damages.
The guarantee is in addition to, and does not diminish your statutory or legal rights.
Guarantor: Argos Limited
489 - 499 Avebury Boulevard
Central Milton Keynes
MK9 2NW
Loading...