USER MANUAL
DAB+ / FM
Radio
Bluetooth /
NFC Connect
Fast Charge
USB Port
DIGITAL ALARM
CLOCK RADIO
BCR40DABT WD
BCR40DABT BLK
2
DAB/FM/Bluetooth clock radio
Contents
Important Safety Information 3
Parts / Accessories 4
Using your DAB/FM clock radio
Standby mode 5
DAB mode 5
FM mode 7
Aux in mode 8
Bluetooth / NFC mode 9
Alarm setting 10
How to set preset in DAB or FM 11
Snooze Function 11
Setting Time 13
Backlight 14
Factory Reset 15
System setting 12
Trouble shooting and error messages 16
Technical Specifications 17
Cleaning and Care 17
3
DAB/FM/Bluetooth clock radio
Thank you for purchasing this BUSH DAB+/FM clock radio. Please read the instructions and
warnings carefully before use, to ensure safe and satisfactory operation of this product.
Important Safety Information
- This product is only intended for audio entertainment. Do not use the product for any other purpose than
described in this manual in order to avoid any hazardous situation. Improper use is dangerous and will void
any warranty claim.
- For household use only. Do not use outdoors.
- Danger! Excessive sound pressure from earphones and headphones can cause hearing loss. If you listen to
loud music for a long time, your hearing may be impaired. Set to a moderate volume.
- Danger of suffocation! Keep all packaging material away from children.
- Only use under normal room temperature and humidity conditions.
- The product is only suitable for use at moderate degrees of latitude. Do not use in the tropics or in
particularly humid climates.
- Outdoor antennas should be located away from power lines.
- Do not move the product from cold into warm places and vice versa. Condensation can cause damage to the
product and electrical parts.
- Do not use attachments or accessories other than recommended by the manufacturer or sold with this
appliance. Install in accordance with this user manual.
- When installing the product, leave sufficient space for ventilation.
Do not install in bookcases, built-in
cabinets or the like.
- Do not install near any heat sources such as radiators, heat registers, stoves or other appliances (including
amplifiers) that produce heat.
- Do not apply excessive force to the front or top, as this could ultimately overturn the product.
- Do not shift or move the product when powered on.
- Do not touch, push or rub the surface of the product with any sharp or hard objects.
- Danger! To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
- The product should not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
should be placed on the product.
- No naked flame sources, such as lighted candles, should be placed on the product.
- Before connecting the product to a socket outlet, make sure the voltage indicated on the product
corresponds to your local mains.
- Never pull the adaptor power plug by the supply cord or with wet hands.
- Disconnect the adaptor power plug in case of faults during use, during lightning storms, before cleaning and
when not using the product for a longer period of time.
- Danger! Before cleaning, switch the product off and disconnect the adaptor power plug from the socket.
- When the product has reached the end of its service life, make it defective by disconnecting the adaptor
power plug from the socket and cutting the cord in two.
4
DAB/FM/Bluetooth clock radio
Parts
1. NFC chip 9. SNOOZE button
2. MODE button 10. TUNE button (PLAY/PUASE button
3. PRESET button (BACKWARD button in Bluetooth mode) in Bluetooth mode)
4. ALARM button 11. Antenna
5. BACK button (FORWARD button in Bluetooth mode) 12. USB output (5V/2A)
6. MENU / INFO button 13. Headphone jack (3.5mm)
7. VOLUME button / Scroll / SELECT rotary dial 14. Audio-IN (AUX IN)
8. POWER button 15. DC input (5V/3A)
Accessories
1 x Power adaptor
1 x Instruction manual
1 x Warranty booklet
5
DAB/FM/Bluetooth clock radio
STANDBY MODE
When the power is connected for the first time, the radio will enter standby mode.
Display will show the ‘Time is not set’ and the clock will flash ‘00:00’
TURNING YOUR RADIO ON FOR THE FIRST TIME:
When the radio is switched on for the first time it will automatically go into DAB mode.
The radio will display ‘Scanning’ on the screen and a bar will show the scanning
progress. The number on the right of scanning shows how many channels are found.
DAB RADIO MODE
In this mode, the radio receives a digital signal and displays information about the
radio station, music title, etc.
1. Press <POWER> to turn on. Then press the <MODE> button to select ‘DAB MODE’
on the display.
Note: If no DAB reception is currently available, change the position of your device
or adjust the aerial. Press and hold the <MENU / INFO> button to enter the menu.
Turn the rotary button to select ‘Full scan’ and press the <SCROLL/SELECT> button
to confirm, this will start a new search.
2. In DAB mode, turn the rotary button to navigate through the available DAB channels.
First press the ‘TUNE’ button, and turn the rotary dial to select a channel from the list,
press the <SCROLL/SELECT> dial to confirm.
3. Short press the <INFO> button for more information about your DAB station.
Information such as:
- DLS (Dynamic Label Segment) – scrolling text
- Signal Strength
- PTY (Programme Type)
- Ensemble
- Frequency
- Signal quality
- Bitrate codec
- Time
- Date
Loading...