Bush AGE96RA, AGE96RS Instruction manual
FREESTANDING COMBINED GAS COOKER
Operating & Installation Instructions -Please keep for future reference
AGE96RW
AGE96RS
AGE96RA
Important - Please read these instructions fully before using
These instructions contain important information which will help you get the best from your
appliance and help to ensure safe and correct installation, use and maintanence.
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 257 7271
Contents
0345 257 7271
Parts
Safety Information
Installation
User Instructions
Cleaning and maintenance
Service and Transport
Injector Table
Techical Specifications
2
3
6
11
22
25
26
27
Customer Helpline 0845 600 4632
Dear Customer,
Offering quality products that meet your
expectations is our goal. Our products are tested
carefully to ensure their quality.
This manual is prepared in order to help you to
use your appliance confidently and efficiently.
Before using your appliance carefully read this
guide as it includes basic information for correct
and safe installation, maintenance and use.
Contact your nearest authorised service agent for
installation of your appliance.
DESCRIPTION OF THE OVEN
Product code
AGE96RW
AGE96RS
AGE96RA
Parts
0345 257 7271
Customer Helpline 0845 600 4632
Please familiarise yourself with the parts and accessories listed below
1
2
3
7
11
4
5 6
10
8
12
13
1- Splashback
2- Cooktop
3- Control Panel
4- Oven Door Handle
5- Drawer Cover
6- Adjustable Feet
7- Oven Door
8- Oven Lamp
9
9- Semi-Rapid Burner
10- Rapid Burner
11- Auxillary Burner
12- Pan Support
13- Wok Burner
2
Safety Information
0345 257 7271
Important - Please read these instructions fully before installation
Customer Helpline 0845 600 4632
READ THESE INSTRUCTIONS CAREFULLY AND
COMPLETELY BEFORE USING YOUR
APPLIANCE, AND KEEP IT IN A CONVENIENT
PLACE FOR REFERENCE WHEN NECESSARY.
THIS MANUAL IS PREPARED FOR MORE THAN
ONE MODEL IN COMMON. YOUR APPLIANCE
MAY NOT HAVE SOME OF THE FEATURES THAT
ARE EXPLAINED IN THIS MANUAL. PAY
ATTENTION TO THE EXPRESSIONS THAT HAVE
FIGURES, WHILE YOU ARE READING THE
OPERATING MANUAL.
General Safety Warnings
IMPORTANT- This appliance can be
used by children aged from 8 years
and above and persons with reduced
physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning
use of the appliance in a safe way
and understand the hazards
involved. Children shall not play with
the appliance. Cleaning and user
maintenance shall not be made by
children without supervision.
WARNING- Danger of fire: do not
store items on the cooking surfaces.
WARNING- If the surface is cracked,
switch off the appliance to avoid the
possibility of electric shock.
IMPORTANT- For hobs incorporating
a lid, any spillage should be removed
from the lid before opening. And also
the hob surface should be allowed
to cool before closing the lid.
IMPORTANT- The appliance is not
intended to be operated by means
of an external timer or separate
remote-control system.
WARNING- In order to prevent
tipping of the appliance, the
stabilizing brackets must be
installed. (For detail information
please read the anti-tilting kit set
guide.)
WARNING- The appliance and its
accessible parts become hot during
use. Care should be taken to avoid
touching heating elements. Children
less than 8 years of age shall be kept
away unless continuously
supervised.
WARNING- Unattended cooking on a
hob with fat or oil can be dangerous
and may result in fire. NEVER try to
extinguish a fire with water, but
switch off the appliance and then
cover flame e.g. with a lid or a fire
blanket.
IMPORTANT- During use, the
appliance becomes hot. Care should
be taken to avoid touching heating
elements inside the oven.
IMPORTANT- During use, handles
held for short periods in normal use
can get hot.
IMPORTANT- Do not use harsh
abrasive cleaners or sharp metal
scrapers to clean the oven door
glass and other surface since they
can scratch the surface, which may
result in shattering of the glass or
3
Safety Information
0345 257 7271
Customer Helpline 0845 600 4632
Important - Please read these instructions fully before installation
damage to the surface.
IMPORTANT- Do not use steam
cleaners for cleaning the appliance.
WARNING- Ensure that the appliance
is switched off before replacing the
lamp to avoid the possibility of
electric shock.
CAUTION- Accessible parts may be
hot when the cooking or grilling is in
use. Young children should be kept
away.
IMPORTANT- Your appliance is produced in
accordance with all applicable local and
international standards and regulations.
IMPORTANT- Maintenance and repair work must be
made only by authorized service technicians.
Installation and repair work that is carried out by
unauthorized technicians may endanger you. It is
dangerous to alter or modify the specifications of
the appliance in any way.
IMPORTANT- If after 15 s the burner has not lit,
stop operating the device and open the
compartment door and/or wait at least 1 min
before attempting a further ignition of the burner.
IMPORTANT- These instructions are only valid if the
country symbol appears on the appliance. If the
symbol does not appear on the appliance, it is
necessary to refer to the technical instructions
which will provide the necessary instructions
concerning modification of the appliance to the
conditions of use of the country.
IMPORTANT- All possible security measures have
been taken to ensure your safety. Since the glass
may break, you should be careful while cleaning
to avoid scratching. Avoid hitting or knocking on
the glass with accessories.
IMPORTANT- Ensure that the supply cord is not
wedged during the installation. If the supply cord
is damaged, it must be replaced by the
manufacturer, its service agent or similarly
qualified persons in order to prevent a hazard.
IMPORTANT- While the oven door is open, do not
let children climb on the door or sit on it.
Installation Warnings
IMPORTANT- Prior to installation, ensure that the
local distribution conditions (nature of the gas and
gas pressure or electricity voltage and frequency)
and the requirements of the appliance are
compatible. The requirements for this appliance
are stated on the label.
CAUTION-This appliance is designed only for
cooking food and is intended for indoor domestic
household use only and should not be used for
any other purpose or in any other application,
such as for non-domestic use or in a commercial
environment or room heating.
MPORTANT- Do not try to lift or move the appliance
by pulling the door handle.
IMPORTANT- This appliance is not connected to a
combustion products evacuation device. It shall
be installed and connected in accordance with
current installation regulations. Particular attention
shall be given to the relevant requirements
regarding ventilation.
IMPORTANT- Do not operate the appliance before
it is fully installed.
IMPORTANT- The appliance must be installed by an
authorized technician and put into use. The
producer is notresponsible for any damage that
might be caused by defective placement and
installation by unauthorized people.
IMPORTANT- When you unpack the appliance,
make sure that it is not damaged during
transportation. In case of any defect; do not use
the appliance and contact a qualified service
agent immediately. As the materials used for
packaging (nylon, staplers, styrofoam...etc) may
cause harmful effects to children, they should be
collected and removed immediately.
IMPORTANT- Protect your appliance against
atmospheric effects. Do not expose it to effects
such as sun, rain, snow etc.
IMPORTANT- The surrounding materials of the
4
Safety Information
0345 257 7271
Customer Helpline 0845 600 4632
Important - Please read these instructions fully before installation
appliance (cabinet) must be able to withstand a
temperature of min 100°C.
During usage
IMPORTANT- When you first run your oven a certain
smell will emanate from the insulation materials
and the heater elements. For this reason, before
using your oven, run it empty at maximum
temperature for 45 minutes. At the same time you
need to properly ventilate the environment in
which the product is installed.
IMPORTANT- During usage, the outer and inner
surfaces of the oven get hot. While opening the
oven door, step back to avoid the hot steam
coming out of the oven. There may be a risk of
burns.
IMPORTANT- Do not put flammable or combustible
materials, in or near the appliance when it is
operating.
IMPORTANT- Always use oven gloves to remove and
replace food in the oven.
IMPORTANT- Do not leave the cooker while cooking
with solid or liquid oils. They may catch fire on
condition of extreme heating. Never pour water on
to flames that are caused by oil. Cover the saucepan
or frypan with its cover in order to choke the flame
that has occured in this case and turn the cooker off.
IMPORTANT- Always position pans over the centre of
the cooking zone, and turn the handles to a safe
position so they cannot be knocked or grabbed.
IMPORTANT- If you will not use the appliance for a long
time, plug it off. Keep the main control switch off.
Also when you do not use the appliance, keep the
gas valve off.
IMPORTANT- Make sure the appliance control knobs
are always in the "0" (stop) position when it is not
used.
ventilation holes open or install a mechanical
ventilation device (mechanical extractor hood).
IMPORTANT- Prolonged intensive use of the
appliance may call for additional ventilation, for
example opening of a window, or more effective
ventilation, for example increasing the level of
mechanical ventilation where present.
IMPORTANT- While using the grill burner, keep the
oven door open and always use the grill deflector
shield supplied with the product. Never use the
grill burner with the oven door closed.
CAUTION-Glass lids may shatter
when heated. Turn off all the burners
before shutting the lid. The hob
surface should be allowed to cool
before closing the lid.
IMPORTANT- When the door or drawer of the oven
is open, do not leave anything on it. You may
unbalance your appliance or break the cover.
IMPORTANT- Do not put heavy things or flammable
or ignitable goods (nylon, plastic bag, paper,
cloth...etc) into the drawer. This includes
cookware with plastic accessories (e.g. handles).
IMPORTANT- Do not hang towels, dishcloths or
clothes from the appliance or its handles.
During cleaning and maintenance
IMPORTANT- Always turn the appliance off before
operations such as cleaning or maintenance. You
can do it after plugging the appliance off or
turning the main switches off.- Do not remove
the control knobs to clean the control panel.
TO MAINTAIN THE EFFICIENCY AND SAFETY
OF YOUR APPLIANCE, WE RECOMMEND YOU
ALWAYS USE ORIGINAL SPARE PARTS AND
TO CALL ONLY OUR AUTHORIZED SERVICE
AGENTS IN CASE OF NEED.
IMPORTANT- The trays incline when pulled out. Be
careful not to let hot liquid spill over.
- CAUTION: The use of a gas cooking appliance
results in the production of heat, moisture and
products of combustion in the room in which it is
installed. Ensure that the kitchen is well ventilated
especially when the appliance is in use, keep natural
5
Installation
0345 257 7271
Customer Helpline 0845 600 4632
This modern, functional and practical cooker, that
was manufactured with parts and materials of the
highest quality and will meet your cooking needs in
every aspect. You should read this manual in order
to avoid encountering any problems with your
cooker and in order to achieve the best possible
cooking results. The following are the instructions
for correct installation and service processes. It
must be read by the technician who will install the
appliance.
!
Important: This appliance must be installed by
qualified people according to the manufacturers
installation instructions, local building regulations,
gas authority codes and electrical wiring
instructions.
Environment where your appliance will be installed
Your product must be set up and used in a
•
place where it will always have ventilation
.
• For rooms with a volume of less than 5 m³ permanent ventilation of 100 cm² is required.
• For rooms with a volume of between 5 m³ and
10 m³ a permanent ventilation of 50 cm² will be
required unless the room has a door which opens
Air inlet section
min. 100cm
2
Air inlet section
min. 100cm
2
Cooker hood
flue
Air inlet section
min. 100cm
Figure 3
COOKER HOOD
Min. 42cm
2
90cm
Min. 65cm(with hood)
Min. 70cm(without hood)
Electrical ventilator
Air inlet section
min. 100cm
Figure 4
Min. 42cm
Figure 5
The cooking appliances that operate with gas,
throw the burned gas wastes out directly to the
outside or through the cooker hoods that are
connected to a chimney that opens directly to the
outside. If it seems not possible to install a cooker
hood, it is required to set an electric fan on the
window or wall that has access to fresh air. This
electric fan must have the capacity to change the
air of the kitchen environment 4-5 times of its own
volume of air per hour
.
Installation of product
2
Figure 1
directly in which case no permanent
to the outside,
Figure 2
ventilation is required.
• For rooms with a volume greater than 10 m³ - no
permanent ventilation is required.
!
Pay attention: Regardless of room size, all rooms
containing the appliance must have direct access to
the outside air via an openable window or
equivalent.
The room containing the cooker should have an air
supply in accordance with BS 5440: Part 2.
Emptying of the Burned Gases from Environment
6
There are some factors that must be paid attention
to while installing your product. You must be very
careful while installing your product. Pay attention
to our below instructions in order to be able to
prevent any problems and/or dangerous situations
that may occur later
The appliance can be placed close to other
•
.
furniture on condition that in the area where the
oven is set up, the furniture's height does not
exceed the height of the cooker panel
Pay attention not to place it near the
•
.
refrigerator, there must be no flammable or
inflammable materials such as curtain,
waterproof cloth, etc. that will begin to burn
quickly
•
manufactured resistant to temperatures up to
.
The furniture close to product must be
100°C.
Installation
0345 257 7271
•
If the kitchen furniture are higher than the
cooktop, it must be at least 10cm away from
the cooker's side.
•
It is advised that there is a 2cm blank space
around the product for air circulation
.
Customer Helpline 0845 600 4632
fluids. No bubble should appear. If there are
bubbles, check the connection joint and redo the
test. Do not use naked flame to check gas
leakage. All metal components used during gas
connection must be clear of rust. Also check the
expiry dates of components to be used.
The minimum heights from the pan support and
wall cupboards to cooker hoods with fan over the
product, are shown in figure 5. Thus, the cooker
hood must be at minimum 65cm height from the
pan support. If there is no cooker hood, this height
must not be less than 70cm.
Gas connection
Assembly of gas supply and leakage check
The connection of the appliance should be
performed in accordance with local and
international standards and regulations applicable.
First check what type of gas is installed on the
cooker. This information is given by a sticker on
the back of the cooker. You can find the
information related to appropriate gas types and
appropriate gas injectors on technical data table.
Check that the feeding gas pressure is compliant
with values on the technical data table, to be able
to get the most efficiency and to ensure the least
consumption. If the pressure of used gas is
different than these values stated or not stable in
your area, it may be required to assemble an
available pressure regulator on the gas inlet. It is
certainly required to contact to the authorized
service to make these adjusments.
The points that must be checked during flexible
hose assembly
If the gas connection is made by a flexible hose
that is fixed on the gas inlet of appliance, it must
be fixed by a pipe collar as well. Connect your
appliance with a short and durable hose that is as
close as possible to the gas source. The hose's
permitted maximum lenght is 1.5m. The hose that
brings gas to the appliance must be changed once
a year for your safety.
The hose must be kept clear from areas that may
heat up to temperatures in excess of 90 C. The
0
hose must not be ruptured, bent or folded. It must
be kept clear of sharp corners, moving things, and
should not be defective. Before assembly, it must
be checked whether there is any production
defect.
As gas is turned on, all connection parts and hose
must be checked with soapy water or leakage
The points that must be checked during fixed
gas connection assembly
To assemble a fixed gas connection (gas connection
made by threads, e.g. a nut), there are different
methods used in different countries. The most
common parts are already supplied with your
appliance. Any other part can be supplied as spare
part.
During connections always keep the nut on the gas
manifold fixed, while rotating the counter-part. Use
spanners of appropriate size for safe connection. For
all surfaces between different components, always
use the seals provided in the gas conversion kit. The
seals used during connection should also be
approved to be used in gas connections. Do not use
plumbing seals for gas connections.
Remember that this appliance is ready to be
connected to gas supply in the country for which it
has been produced. The main country of destination
is marked on the rear cover of the appliance. If you
need to use it in another country, any of the
connections in the figure below can be required. In
such a case, contact local authorities to learn the
correct gas connection.
Gas Pipe Gas Pipe Gas Pipe Gas Pipe
Seal
Hose
Fitting
Gas Hose
with Collar
Seal
Adapter
Mechanical
Gas Hose
Seal
Mechanical
Gas Hose
Mechanical
Gas Hose
Figure 6
It is required to call the authorized service to be
able to make the gas connections appropriately
and in compliance with safety standards.
ATTENTION!
!
lighter for control of gas leakage
Surely do not use any match or
.
Changing the gas inlet:
For some countries, the gas inlet type can be
different for LPG/NG gases. In such a case,
remove the current connection components and
nuts (if any) and connect the new gas supply
accordingly. In all conditions, all components used
in gas connections should be approved by local
and/or international authorities. In all gas
connections, refer to the “Assembly of gas supply
and leakage check” clause explained before.
7
Installation
0345 257 7271
Gas conversion
Caution : The following procedures must be
undertaken by authorized service people.
Your appliance is adjusted to be operated with
LPG/NG gas. The gas burners can be adapted to
different types of gas, by replacing the
corresponding injectors and adjusting the
minimum flame length, suitable to the gas in use.
For this purpose, the following steps should be
performed
Changing injectors:
:
Customer Helpline 0845 600 4632
Hob Burners
Cut off the main gas supply and unplug from the
•
electric mains
Remove the burner cap and the adapter
•
(Figure 7).
Unscrew the injectors. For this, use a 7mm
•
spanner(Figure 8).
Replace the injector with the ones from the gas
•
conversion kit, with corresponding diameters
suitable to the type of gas that is going to be
used, according to the information chart (which
is also supplied in the gas conversion kit).
:
.
Figure 7
Spanner
Injector
Figure 8
8
Loading...