Bush AG56S2, AG56SA Instruction manual

Operating Instructions – Please keep for future reference

AG56SW

AG56SW

AG56SS

AG56SB

Important – Please read these instructions fully before using

These instructions contain important information that will help you get the best from your

appliance, ensuring safe and correct installation, use and maintenance.

If you need help or have damaged or missing parts, call the Customer Helpline on 0345 257 7271

Contents

Parts 3

Safety Information 4

Installation 5

User instructions 7-10

Using the hob 7

Using the oven and grill 9

Cleaning and Maintenance 11-12

Cleaning and Maintenance 11-12

Transporting the cooker 12

Trouble Shooting 13

Technical Specifi cations 14-15

Cu

stomer Helpline 0345 257 7271

Injector table 14

Guarantee 16

Product code

AG56SW

AG56SS

AG56SB

2

Parts

Grill pan and handle set

Oven rack

If you have damaged or missing parts, call the Customer Helpline: 0345 257 7271

Please familiarise yourself with the parts and accessories listed below

1

2

3

4

5

8

9

10

11

6

14

13

12

7

1. Pan supports x 2

2. Gas burner

3. Rapid burner

4. Control panel

9. Auxiliary burner

10. Ignition switch

11. Light switch

12. Oven rack support

15

16

5. Oven handle

6. Oven door

7. Adjustable foot x 4

8. Gas burner

Accessories

Grill pan and handle set

Grill heat shield

13. Oven drip tray

14. Oven rack

15. Grill heating element

16. Oven light

3

Safety Information

CAUTION: The use of a gas cooking appliance
results in the production of heat, moisture and
products of combustion in the room in which it is
installed. Ensure that the kitchen is well
ventilated especially when the appliance is in
use, keep natural ventilation holes open or install
a mechanical ventilation device(mechanical
extractor hood).
CAUTION: This appliance is for cooking
purposes only. It must not be used for other
purposes, for example room heating.

Cu

stomer Helpline 0345 257 7271

Important – Please read these instructions fully before installation

Your appliance is produced in conformity with all
relevant safety regulations relating to electrical
appliances. Maintenance and repair work must only
be performed by authorised or suitably qualifi ed
service technicians. Installation and repair work
performed without observing the rules may be
dangerous.

IMPORTANT - This appliance has been designed
for non-professional, domestic use only.

IMPORTANT - Carefully unpack and examine the
appliance for any damage. If you think there is a
defect, do not use the appliance and contact the

authorised repair agent on 0345 257 7271.

IMPORTANT - Dispose of all packaging correctly
and responsibly and in accordance with all local
laws and regulations. Never leave packaging
components within the reach of children as they
can be a source of danger.

IMPORTANT - Before connecting the appliance
to the household electrical supply, make sure
the appliance is rated correctly for the type of
electrical supply in your house by checking the
information on the rating plate.

IMPORTANT - Make sure your electrical isolation
switch is in an easily accessible position following
installation.

WARNING - Accessible parts become hot during
use, young children must be kept away.

WARNING - This appliance is not intended for
use by persons (including children) with reduced
physical, sensory and mental capabilities or lack
of experience and knowledge, unless they have
been given supervision or instructions concerning
use of the appliance by persons responsible for
their safety.

WARNING - Children should be supervised
to make sure that they do not play with the
appliance.

WARNING - When the oven door is open do
not place anything on it. This could disturb the

balance of the appliance or break the door.

WARNING - Make sure cables of other electrical
devices cannot come into contact with the hot
parts of this appliance.

WARNING - Protect your appliance from
atmospheric effects. Do not expose to the effects
of sun, rain, snow, dust etc.

CAUTION - Disconnect the appliance from the
electrical supply before changing the oven lamp.

CAUTION - Make sure the appliance is turned off
at the mains before cleaning.

IMPORTANT - Switches should be set to ‘0’
when the appliance is not in operation.

IMPORTANT - Do not use steam cleaners for
cleaning the cooking hobs and oven cavity.

IMPORTANT - In the event that the fl exible cable is
damaged contact your authorised service agent for
replacement - the cable fi tted to this appliance may
not be replaced by an unauthorised person.

WARNING - Whilst grilling, the oven door must
be open. Never use the grill with the oven door
closed.

WARNING - This appliance must be installed
by an authorised technician prior to use. The
manufacturer is not responsible for any damage
that might be caused by installation not in
accordance with these instructions.

4

CAUTION - Do not keep fl ammable materials
close to the appliance when it is in operation.

CAUTION - Do not move away from the
appliance while cooking with fat or oil. Flaring may
occur in the case of overheating. Never pour water
into fl aring oil.

Installation

100

Positioning & electrical connection

IMPORTANT - All Gas installations must be carried
out by a suitably qualifi ed person. For information
on choosing a gas installer contact the ‘Gas Safe
Register’. For specifi c gas installation, refer to the
separate installation guide.

Positioning

Make sure that there are no combustible or1.

fl ammable materials, such as curtains, in the
vicinity of the installation.

Furniture and cabinets surrounding the2.

oven must be of material resistant to
temperatures greater than 50 °C.

Surrounding furniture, cabinets and3.

extractor fans should be positioned in
accordance with the diagram shown
in fi gure 1.

C

ustomer Helpline 0345 257 7271

There must be at least 2cm of free space4.

between the back wall and the rear of the
appliance to allow for ventilation and
air circulation.

If fi tted, the extractor fan must be at least5.

65cm above the hob. If no fan is fi tted the
minimum distance between the hob and
any cabinet or other structure must be
70cm.

Feet height adjustment

The height and level of the appliance can1.
be adjusted by rotating the feet located
underneath the appliance at each corner as
shown in fi gure 2.

Rotate in a clockwise direction to decrease2.
the height and anti clockwise to increase the
height.

Once the desired level has been achieved3.
make sure to lift the appliance into its location.
Do not drag it as this may cause damage to
your fl oor and the appliance.

Figure 1

See detail A

Detail A

Figure 2

5

Installation

Positioning & electrical connection

IMPORTANT - Electrical connections must be
carried out by a suitably qualifi ed person and in
accordance with all relevant local building and
installation regulations.

Electrical connections

This appliance is fi tted with fused plug which1.
should be inserted into a suitable mains socket.

It is recommended that the mains socket is2.
located behind the appliance and is switched
on and off via a separate switched Fused
Connection Unit (FCU).

It is recommended that the switched FCU3.
is located adjacent to the appliance within a
maximum distance of 2m. The switched FCU
must not be located above the appliance
but should be easily accessible in case of an
emergency.

C

ustomer Helpline 0345 257 7271

6

User Instructions

Using the hob

Cu

stomer Helpline 0345 257 7271

Ignition of the burners

First identify the correct control knob by1.
checking the symbols above each knob as
shown in fi gure 3.

Turn the control knob fully clockwise to the2.
‘Max’ position whilst pressing in towards the
control panel as shown in fi gure 4.

Simultaneously press and hold the ignition3.
button until the gas burner is alight.

Continue to hold both the ignition button and4.
the control knob inwards for at least 5 seconds.

In the event the burner or ring fails to light,5.
repeat the process in steps 1-4 above. In the
event this still fails to operate, wait at least 90
seconds before attempting to ignite the burner.

IMPORTANT6. – This appliance is equipped with
a ‘Flame Safe Device’ (FSD). In the event that
the oven burner or gas rings are accidentally
extinguished the gas supply will be cut. Wait
for at least 90 seconds before attempting to
re-ignite the burners.

SERVICE AND TRANSPORT

1

2

3

Max

4

9

5

9

8

7

Max position

Figure 3

Figure 3

Figure 4

Control of the hob rings

Each control knob has 3 main positions as1.
shown in fi gure 5:

O• ff (0)

Min•

Max•

After ignition the control can be adjusted2.
anywhere between the max and min positions
to achieve the desired heat output.

To turn the hob off, rotate the control knob into3.
the ‘0’ position.

IMPORTANT – If the fl ame is seen to have a
prolonged yellow colouration, turn off the burners
and make sure the burner assembly is correctly
positioned. Wait for 90 seconds before attempting
to re-ignite the burner.

Off (O)

Max

Min

Figure 5

7

User Instructions

Using the hob

Performance tips

Always select pans that are correctly sized1.
for the ring on which it is positioned to avoid
unnecessary energy loss as shown in fi gure 6.

To avoid accidental spillage, make sure pans2.
are centrally positioned and avoid allowing
handles to overhang.

CAUTION - Do not allow the fl ame tips to spread
around the edges of pans to avoid the pan handles
and other external parts becoming hot.

Electric connection and safety

During the electric connection, follow the
instructions stated in the user manual

.

C

ustomer Helpline 0345 257 7271

Figure 6

The earthing cable must be connected to the

•
earth terminal

You have to ensure the power cord with

•
suitable insulation to be connected to the power
source during the connection If there is no
appropriate earthed electric outlet in
accordance with regulations in the place where
the appliance to be installed, contact to our
authorized service. The earthed electric outlet
must be close to the appliance.

Do not use an extension cord

• .

The power cord must not touch to the hot

•
surface of the product.

In case the cord is damaged, contact

•
Authorized Service to have it changed

Any wrong electric connection may damage

•
your appliance, as well as endangering your
safety, rendering your guarantee invalid

The appliance is adjusted for 230V 50Hz

•
electricity. If the mains electricity is different
contact your authorized service

.

.

.

.

.

BROWN

L

YELLOW+GREEN

BLUE

N

•

The supply cord should be kept away from hot
parts of appliance. Otherwise, the cord may be
damaged, causing short circuit.

•

The manufacturer declares that it has no
responsibility against any kind of damages and
losses that are caused by improper connections
that are performed by unauthorized people

8

.

User Instructions

Gas

Using the oven and grill

Using the grill pan and handle set

WARNING - Always use an oven glove to protect

your hand when using the grill, as the metal parts
can become very hot!

The grill pan has a detachable handle. When using
the grill pan handle, make sure that it is centralised
and secure, as shown in fi gure 7.

IMPORTANT - Do not leave the handle in position
when grilling. If the handle is left in position, it will
get very hot.

Oven control

The oven is controlled using the oven/grill1.
control knob. The oven is ignited in the same
way as the gas hob rings.

The temperature may be adjusted according2.
to the markings on the control knob between
gas marks 1 and 9. The table below gives
approximate temperature equivalents for each
gas mark setting.

C

ustomer Helpline 0345 257 7271

3.

Gas Mark Temperature

Oven

1 140 °C

2 150 °C

3 170 °C

4 180 °C

5 190 °C

6 200 °C

7 220 °C

8 230 °C

9 240 °C

MAX 270 °C

To turn the oven off, rotate the control knob4.
anti-clockwise until the ‘0’ position is selected
as shown in fi gure 8.

Figure 7

1

2

3

4

9

5

7

Max

9

8

Figure 8

9

Use of your ovenUser Instructions

Using the oven and grill

Grill set up and use

IMPORTANT - Before using the grill, make sure

the heat shield is inserted in order to prevent
damage and excess heating to the control panel
and knobs.

Hold the heat shield so that the fold in the1.

metal is facing upwards as shown in fi gure 9.

Offer up the slots in the heat shield to the two2.

protruding screws between the oven door and

underside of the control panel.

C

ustomer Helpline 0345 257 7271

Figure 9

Make sure the heat shield is located securely3.

by pushing it fi rmly towards the oven.

The grill is ignited in the same way as the hob4.

rings. The Grill position on the oven/grill control

knob is shown in fi gure 10.

The grill temperature can not be varied but5.

provides a constant heat.

Make sure the oven rack is in the upper most6.

position that ensures food does not touch the

fl ame during use.

WARNING – Make sure the grill is turned off before
closing the oven door.

Grill Position

1

2

3

4

9

5

7

Max

9

8

Figure 10

10

Cleaning and Maintenance

Cleaning and maintenance

C

ustomer Helpline 0345 257 7271

CAUTION - Make sure the oven and hobs are
turned off prior to commencing any cleaning. Make
sure all parts have been allowed to cool to prevent
the risk of burning.

Interior cleaning

IMPORTANT - Do not use steam cleaners when

cleaning the oven.

General cleaning of the interior surfaces may be•

conducted using a wet cloth and soapy water.

Avoid using harsh abrasive cream and/or•

powder based cleaners.

Use an approved oven cleaner periodically or•

when the oven interior is particularly dirty.

In order to prevent damage to your appliance•

always test cleaners on small section fi rst and

follow the manufactures instructions for use.

Exterior cleaning

Changing the oven light

Before replacing the bulb disconnect the1.
appliance from the electrical supply.

Make sure that the oven has had suffi cient time2.
to cool down before opening the oven door.

Remove the glass protective cover by twisting it3.
anticlockwise, taking care not to let it drop.

Remove the lamp by twisting it anticlockwise,4.
taking care not to let it drop.

glass protective cover

Use a wet cloth and mild detergent on metallic•

and enamelled surfaces.

Use a glass cleaner on the exterior surfaces of•

glass windows and doors.

Always follow the cleaner manufacturer’s•

instructions.

IMPORTANT – Do not use abrasive cleaners or
scouring pads as this may damage the enamel
surfaces and shorten the life of the appliance.

Figure 11

The replacement lamp 5. must conform to the
following:

25 Watt 230V, 50 Hz, E14 resistant to high•
temperature (300°C)

Part number 32011563 -Oven Light 230V.•

This bulb can be purchased from your•
authorised service agent.

Replace the lamp.6.

Replace the glass protective cover.7.

Check the light comes on when you use the8.
oven.

WARNING- Fit the grid correctly
into any rack in

corresponding
the oven cavity and push it to
the end.

11

Use of your ovenCare and Maintenance

C

ustomer Helpline 0345 257 7271

Cleaning and maintenance

Routine checks

Periodically inspect the gas connection pipe1.
and electrical connections to make sure there
are no signs of wear or damage.

In the event of any abnormality, contact an2.
authorised service agent to carry out repairs.

Transporting the cooker

IMPORTANT – Before transporting the appliance,
make sure the appliance has been disconnected
from both the gas supply and mains electricity
supply.

WARNING – All gas installation and disconnection
must be performed by a Gas Safe registered
engineer.

Remove all accessories, pan supports, oven1.
trays and all other items which may become
loose during transit.

Tape the oven door closed to prevent it2.
opening.

Where possible, reuse the original packaging. If3.
this is not available, protect the appliance from
damage using suitable packaging materials.

Protect the external surfaces of the appliance4.
using cardboard or paper. Particular attention
should be paid to glass or painted surfaces.

12

Trouble Shooting

C

ustomer Helpline 0345 257 7271

Basic troubleshooting before contacting service

WARNING – If you smell gas, immediately turn of the gas supply at the mains and open all windows and doors
to ventilate the area. Do not operate any electrical appliances including lighting switches and wall sockets. Call
your authorised gas engineer.

Problem Possible cause Solution

- Oven does not turn on.

- Gas ring does not ignite.

- Power is turned off.

- Gas supply is turned off.

- FSD has just operated.

- Make sure both the electrical and gas
connections are operational and that the
gas tap and switches are set to the open/
on positions.

- Wait for 90 seconds and re-ignite
following the procedure on page 7.

No heat or oven does not
warm up.

Oven light does not operate. - Lamp has failed.

Gas rings have an
uneven fl ame or fl ame is
discoloured.

- Gas burner has extinguished.

- Oven temperature control is
incorrectly set.

- Oven door has been left open.

- Electrical supply is
disconnected or switched off.

- Hob assembly is misaligned.

- Dirt or moisture ingress inside
the ring assemblies.

- Gas supply is interrupted.

- Follow the re-ignition procedure
on page 7.

- Check the oven temperature control knob
is set correctly.

- Make sure oven door is closed.
Avoid opening frequently during cooking.

- Replace lamp according to the
instructions on page 11.

- Make sure the electrical supply is turned
on at wall socket outlet.

- Turn off and adjust the ring assemblies to
make sure they are correctly seated.

- Clean and dry the ring assemblies
thoroughly and realign.

- Call the customer helpline on
0845 600 4632 or consult a qualifi ed gas
installation engineer.

Cooking is uneven within
the oven.

- Oven shelves are incorrectly
positioned.

- Gas burner is dirty or
obstructed.

- Position the shelves towards the top or
bottom of the oven following cooking
guidelines. The top of the oven will be
hotter than the bottom.

- Clean the Gas burner carefully using a
soft wet cloth and dry thoroughly before
re-igniting.

mportant If problems persist call an

I

authorised installation engineer or the
customer helpline on 0345 257 7271.

13

Technical Specifi cationsTechnical Specifi cations

Injector table

C

ustomer Helpline 0345 257 7271

14

Technical Specifications

Customer Helpline 0345 257 7271

Model/Item

Power supply

Maximum power

Size(H x W x D)

Net weight

Oven volume

We apologise for any inconvenience caused by any minor inconsistencies in these instructions , which may
occur as a result of product improvemenst and development.

AG56SW / AG56SS / AG56SB

(230)V~/50 Hz

10,3 Kw

900x500x600

38.5

52.5 lt

Disposal information

The symbol on the product or on
its packaging indicates that this
product may not be treated as
household waste. Instead it shall
be handed over to the applicable
collection point for the recycling
of electrical and electronic
equipment.By ensuring this
product is disposed of correctly,
you

will help prevent potential negative consequences
for the environment and human health, which
could otherwise be caused by inappropriate
waste handling of this product. For more detailed
information about recycling of this product,
please contact your local city office, your
household waste disposal service or the shop
where you purchased the product.

52133606 R003 05/15

Customer Helpline:

0345 257 7271.