ABB i-bus® EIB
IR hand-held transmitter
Type: 6010-25-500
The manual remote control is
used for controlling the EIB BUSCHRemote-Control
as a further 5 receivers of the
BUSCH-Remote-Control
®
IR interface as well
®
IR system.
Two MEMO functions can be defined
and retrieved. An ALL OFF function is
available.
The MEMO push button is connected
to the EIB IR interface without
10 consumer devices can be controlled
in two address groups (1 to 5 / 6 to 10).
The address ranges are selected with
a channel changer.
326107
a function. The allocation of the
IR address button as well as the
MEMO function is carried out solely
via the ETS.
Technical Data
Power supply – 4 alkali-manganese batteries
Micro IEC LR 03
Operating and display elements – LED Transmission check
– Push button ALL OFF
– Push buttons M1, M2 Retrieve stored function
– Push button MEMO Prepares the storage
– 2 x 5 push buttons Control of the consumer devices
– Slide switch Channel changer
Housing, colour – Plastic housing, anthracite
Dimensions – 160 x 50 x 20 mm (H x W x D)
Certification – ZZF Certificate number
G012 973B
CE norm – in accordance with the EMC guideline and
the low voltage guideline
Transmission range
0073-1-7020
8-2 July 2000
Loading...