BURY Motion
Index
Introductory information 2
1. General 2
2. Security guidelines 2
Installation of the hands-free car kit 4
3. Scope of supply 4
4. Positioning and mounting 6
5. Installing the BURY Motion in your vehicle 7
6. Inserting and removing the iPhone 9
Operating guidelines 11
7. Turning the cradle 11
8. Using the hands-free car kit for the first time 11
9. Establishing a
10. Accepting, making, ending calls 13
11. Playing back music from your iPhone 14
12. Charging your iPhone 14
Further information 15
13. Service 15
14. Appropriate use of this system 16
15. Approvals and declaration of conformity 16
Bluetooth
connection 12
2
Introductory information
1. General
Dear customer,
Congratulations on purchasing a BURY hands-free car kit. You have chosen a high quality product that
is extremely easy to use.
Please read the operating manual carefully so that you can fully enjoy your BURY hands-free car kit. If
you have any further questions concerning installation or operation of your car kit, please contact your
dealer. He will be happy to give you reliable advice.
You can also contact our hotline. Our phone and fax numbers are listed in the chapter Service at the
end of the operating instructions.
Have a good trip!
2. Security guidelines
Installation - who and where
The installation of this system can be carried out by yourself but please
observe the installation requirements of the automotive manufacturer
(VAS 1978). During the installation, park the car at a place where the
road traffic is not impaired.
Power supply
This system has been designed for the use in vehicles with an on-board
supply system of 12 volts (passenger car). If you intend to install the
device in a vehicle with an on-board supply system of 24 volts (lorry),
please use a voltage converter. If you have queries regarding this subject, please contact our hotline.
Position, volume
Install the components of the device in the vehicle so that your field of
vision is not impaired and the components are not mounted in the impact zone of the passenger compartment or in the airbag inflation
zones.
3
Intended use
We shall not be liable for damages or malfunctions due to improper use
of the hands-free system. Therefore, do not expose the device to moisture, extreme temperatures or shocks and carefully follow the procedure described in the installation and operating guidelines.
Use while driving
Operate the system only when the situation allows it and when you do
not endanger, harm, constrain, or annoy other road users. The volume
of the device has to be set in a way that exterior noise is still audible.
Faults
Do not commission the device if you detect or assume a defect. In this
case, contact a Bury specialised dealer or our hotline. Improper repair
efforts can be dangerous for you. Therefore, only skilled personnel may
perform inspections.
Using the power supply cable with the cigarette lighter plug
Please only use this cable in connection with the BURY Motion. Do not
charge up a mobile phone or laptop using the cable. The cable is not
suitable for use in HGVs. The voltage output that is emitted on the mini
USB plug totals 12 volts.
Important:
The driver is ultimately responsible for the safe operation X
and control of their vehicle at all times. You should never
use a hand held phone, including sending or reading tex t or
picture messages, while driving.
Research indicates that there is a risk to safety when the X
driver of a motor vehicle is distracted and using a mobile
phone while driving can be a distraction.
The manufacture r strongly recommends that you use a X
hands-free solution when driving.
4
3. Scope of supply
Installation of the hands-free car kit
5
1
2
3
The hands-free car kit (HFCK) is supplied with different combinations of components, depending on
the sales regions (countries). The operating manual refers to all versions.
Description of the components:
1) Window Mount
2) Mobile phone specific cradle with integrated electronics
3) 12V vehicle power adaptor cable with cigarette lighter connection
4) Installation and Operating manual on CD
5) Plug-in external microphone
6) Dash Mount Adapter for installation on the dashboard or console
(Depending on the version available inclusive or separately as an accessory)
Accessories - available separately / including, if applicable:
7) GPS module to improve the navigation reception (only for iPhone 3GS/ 3G)
8) Car Mount (adhesive pad for mounting on the dashboard)
9) ISO cable tree for fixed installation
10) External microphone for perfect speech input (special passive microphone)
11) AUX IN/OUT cable for music playback using the car radio
Note:
If certain components are added or omitted you will receive the corresponding X
information on a separate enclosure.
Connection options:
1 Microphone
2 AUX IN/OUT
3 Power supply
Loading...