Bunn TF DBC Parts List

RELEASED FOR PRODUCTION

SINGLE ® TF DBC

W/SMART FUNNEL

ILLUSTRATED PARTS CATALOG

Designs, materials, weights, speciﬁcations, and dimensions for equipment or replacement parts

are subject to change without notice.

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: (217) 529-6601 FAX: (217) 529-6644

DIR Num: 36096.0001 06, November 2014

RELEASED FOR PRODUCTION

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCR/MCP/MCA single cup brewers, thermal servers and ThermoFresh® servers (mechanical and digital) 1 year parts and 1 year labor.

2) All other equipment - 2 years parts and 1 year labor plus added warranties as speciﬁed below: a) Electronic circuit and/or control boards - parts and labor for 3 years. b) Compressors on refrigeration equipment - 5 years parts and 1 year labor. c) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis - parts and labor for 4 years or 40,000 pounds of coffee, whichever comes ﬁrst.

These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, non periodic cleaning and descaling, equipment failures related to poor water quality, damage or casualty. In addition, the warranty does not apply to replacement of items subject to normal use including but not limited to user replaceable parts such as seals and gaskets. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Ofﬁce Box 3227, Springﬁeld, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make

modiﬁcations to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon. If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods speciﬁed above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.

In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost proﬁts, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.

392, A Partner You Can Count On, Air Infusion, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, BrewWISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, iMIX, Infusion Series, Intellisteam, My Café, Phase Brew, PowerLogic, Quality Beverage Equipment Worldwide, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee.com, Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in Beverage Equipment Worldwide, ThermoFresh, Titan, trifecta, TRIFECTA (sylized logo), Velocity Brew, Air Brew, Beverage Bar Creator, Beverage Proﬁt Calculator, Brew better, not bitter., Build-A-Drink, BUNNSource, Coffee At Its Best, Cyclonic Heating System, Daypart, Digital Brewer Control, Element, Milk Texturing Fusion, Nothing Brews Like a BUNN, Picture Prompted Cleaning, Pouring Proﬁts, Signature Series, Sure Tamp, Tea At Its Best, The Horizontal Red Line, Ultra are either trademarks or registered trademarks of Bunn-O-Matic Corporation. The commercial trifecta® brewer housing conﬁguration is a trademark of Bunn-O-Matic Corporation.

Revised 031314

DIR Num: 36096.0001 06, November 2014

RELEASED FOR PRODUCTION

TABLE OF CONTENTS

Base - Trunk - Hood - Covers & Panels ...................................................................................................................................... 4

Electrical Controls .................................................................................................................................................................... 20

Faucet ....................................................................................................................................................................................... 18

Funnel....................................................................................................................................................................................... 24

Inlet Valve and Line .................................................................................................................................................................. 14

Numerical Index ....................................................................................................................................................................... 26

Sprayhead Valve, Water By-Pass Valve and Sprayhead ............................................................................................................ 16

Strainer, Solenoid & Lines ....................................................................................................................................................... 12

Tank and Mounting Brackets .................................................................................................................................................... 10

Tank Heater & Overﬂow Protection Devices ............................................................................................................................... 8

DIR Num: 36096.0001 06, November 2014

36096 063010

RELEASED FOR PRODUCTION

BUNN

BASE - TRUNK - HOOD - COVERS & PANELS

SINGLE TF DBC

Early Models

To redu

t remove

e th s er-se

isk r v

r open

eab

f electr

cove p a

c r t

shock

s inside.

Disc

thorized o nnect po

r v

e personnel only. e r

ore se

rvic

ing

MAIN ON/OFF

SWITCH

DIR Num: 36096.0001 06, November 2014

P2726.40

36096 063008

RELEASED FOR PRODUCTION

BASE - TRUNK - HOOD - COVERS & PANELS

ITEM PART NO. QTY. DESCRIPTION

1 35214.1001 1 Cover Assy, Top BLK (Includes items 2, 3 & 4)

35214.1002 1 Cover Assy, Top BLK 120V models (Includes items 2, 3 & 4)

35214.1003 1 Cover Assy, Top BLK 200V & 230V models (Includes items 2 & 3)

01308.0003 3 Screw, Truss Head BLK #6 - 32 x .25" Locking

2 37881.0000 3 Decal, "No Serviceable Parts"

3 25151.0000 2 Shield, Insulator

4 35726.0000 1 Schematic, 120/208V & 120/240V

36883.0000 1 Schematic, 200 & 230V

36883.0002 1 Schematic, 120V

36883.0004 1 Schematic, 200V with Main Power Switch

36883.0005 1 Schematic, 230V

5 35215.1004 1 Hood W/Decal SST (Includes item 6)

35215.1005 1 Hood W/Decal BLK (Includes item 6)

02308.0000 16 Screw, Pan Head #8 - 32 x .375"

6 35242.0000 1 Switch, Membrane

35242.0001 1 Switch, Membrane (Early 200V models only)

7 35222.1000 1 Trunk W/Decals SST (Includes items 8 & 9)

35222.1001 1 Trunk W/Decals BLK (Includes items 8 & 9)

35222.1002 1 Trunk W/Decals SST 230V (Includes items 8 & 9)

35222.1003 1 Trunk W/Decals BLK 230V (Includes items 8 & 9)

35222.1004 1 Trunk W/Decals SST (Includes items 8 & 9)

35222.1005 1 Trunk W/Decals BLK (Includes items 8 & 9)

35222.1006 1 Trunk W/Decals SST 230V (Includes items 8 & 9)

35222.1007 1 Trunk W/Decals BLK 230V (Includes items 8 & 9)

8 00986.0000 1 Decal, Warning - Electrical

9 00656.0001 1 Decal, Comply to Plumbing Code

10 35236.1000 1 Panel W/Decals, Trunk SST (Includes items 2 & 11)

35236.1001 1 Panel W/Decals, Trunk BLK (Includes items 2 & 11)

01311.0001 6 Screw, Truss Head, Locking SST #8 - 32 x .25"

01311.0004 6 Screw, Truss Head, Locking BLK #8 - 32 x .25"

11 00658.0000 1 Decal, Caution - Decanter/Funnel

12 35235.1001 1 Cover W/Decal, Faucet BLK (Includes items 13 and 24)

01303.0002 1 Screw, Pan Head BLK #4 - 40 x .50"

13 36302.0000 1 Decal, Caution Hot Water

14 34948.1000 1 Plate, Access SST (Includes item 2)

34948.1001 1 Plate, Access BLK (Includes item 2)

01308.0002 1 Screw, Truss Head SST #6 - 32 x .25" Locking

01308.0003 1 Screw, Truss Head BLK #6 - 32 x .25" Locking

Early models

Late models

15 35230.0000 1 Support, Center SST

35230.0001 1 Support, Center BLK

35230.0002 1 Support, Center SST

35230.0003 1 Support, Center BLK

35230.0006 1 Support, Center SST

35230.0007 1 Support, Center BLK

00970.0000 2 Nut, Keps #8-32 Zinc PL

02325.0000 4 Screw, Pan Head, Locking .25-20 x .31" (continued)

* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

Early models

Models Without Main Power Switch

Models With Main Power Switch

DIR Num: 36096.0001 06, November 2014

36096 022212

RELEASED FOR PRODUCTION

BUNN

BASE - TRUNK - HOOD - COVERS & PANELS

SINGLE TF DBC

Early Models

To redu

t remove

e th s er-se

isk r v

r open

eab

f electr

cove p a

c r t

shock

s inside.

Disc

thorized o nnect po

r v

e personnel only. e r

ore se

rvic

ing

MAIN ON/OFF

SWITCH

DIR Num: 36096.0001 06, November 2014

P2726.40

36096 111507

RELEASED FOR PRODUCTION

BASE - TRUNK - HOOD - COVERS & PANELS

ITEM PART NO. QTY. DESCRIPTION

16 35227.0000 1 Base Housing SST

35227.0001 1 Base Housing BLK

35227.0002 1 Base Housing SST 120V, 240V, 120/208V, 120/240V models

35227.0003 1 Base Housing BLK 120V, 240V, 120/208V, 120/240V models

35227.0004 1 Base Housing SST 230V models

35227.0005 1 Base Housing BLK 230V models

02308.0000 12 Screw, Pan Head #8 - 32 x .375"

17 26528.0000 5 Leg, 4.0" Plastic (See item 25)

00502.0000 5 Leg, 4.0" Metal (See item 25)

18 03996.0000 5 Pad, Anti Skid

19 03011.0000 1 Plug, Vent

20 35238.0001 1 Panel, Support

00970.0000 2 Nut, Keps #8-32 Zinc PL

21 36398.0000 1 Hole Plug DB-9 (Early models)

22 39803.0000 1 Decal, Main On/Off Switch

23 38820.0000 1 Plate, Switch Hole Cover

01347.0000 2 Screw, Screw, Truss Head #6-32 x .38"

24 37881.0002 1 Decal, “No Serviceable Parts”

25 13255.0007 - Leg Kit, Plastic (Includes 5 each of items 17 & 18) (Not illustrated)

13255.0002 - Leg Kit, Metal (Includes 5 each of items 17 & 18) (Not illustrated)

Models with Inlet Valve mounted in Hood

Models with Inlet Valve mounted in Base

Models Without Main Power Switch

* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

DIR Num: 36096.0001 06, November 2014

36096 081611

RELEASED FOR PRODUCTION

BUNN

8 7 6 5

TANK HEATER & OVERFLOW PROTECTION DEVICES

EARLY MODEL TANK

SINGLE TF DBC

DIR Num: 36096.0001 06, November 2014

Brewers W/Copper

Overﬂow Cup

P2727

36096 021506

RELEASED FOR PRODUCTION

TANK HEATER & OVERFLOW PROTECTION DEVICES

ITEM PART NO. QTY. DESCRIPTION

1 12398.0002 1 Gasket, Tank Heater

2 12322.1000 1 Tank Heater, 4000W @ 240V (Includes item 1)

12305.1000 1 Tank Heater, 4000W @ 208V (Includes item 1)

36115.1000 1 Tank Heater, 2200W @ 120V (Includes item 1)

00908.0000 4 Nut, Hex #8 - 32

3 23717.0003 1 Thermostat, Limit

00908.0000 2 Nut, Hex #8 - 32

4 02536.0000 3 Grommet .375" I.D.

5 02645.1000 1 Probe Kit (Includes items 6, 7 & 8)

6 01501.0000 1 Washer .164" I.D. x .375" O.D.

7 20203.0100 1 Lockwasher, Internal Tooth #8

8 00908.0000 1 Nut, Hex #8 - 32

9 35565.0000 1 Bracket, Heat Sink

02308.0000 4 Screw, Pan Head #8 - 32 x .38"

10 26622.0001 1 Tube Assy, Vent

11 35253.0000 1 Bracket, Vent Tube Mounting (Early model Tank)

27473.0000 1 Bracket, Vent Tube Mounting (Late model Tank)

12 03803.0000 1 Switch Assy, Liquid Level, 120V, 120/208V & 120/240V (Includes items 13, 14 & 15)

03803.0002 1 Switch Assy, Liquid Level, 200 & 230V (Includes items 13, 14 & 15)

00946.0000 1 Nut, Hex .125" FPT

13 03633.0000 2 Gasket, Float Switch (Only 1 used in this application)

14 01527.0000 3 Washer, Adjusting (Not used in this application)

15 03807.0000 1 Clip, Spring

16 22728.0000 1 Overﬂow Cup Assy Copper (Second type) (Also replaces aluminum cup)

41259.1003 1 Kit, Overﬂow Cup (Aluminum) (Includes items 4,19, 21 & 22)

00971.0000 2 Nut, Keps #10-32

17 12422.0000 2 Clamp, Hose .47"/.54" I.D.

18 03236.0029* 1 Tube, Silicone .312" I.D. x 30.0" (Order item 28)

19 04797.0000 1 Washer, Celcon .520” I.D. x 1.0” O.D.

20 00946.0000 1 Nut, Hex .125” FPT

21 41280.0001 1 Elbow,.375” Multi Barb

22 41266.0000 1 Film, Insulating

23 02434.0010 1 U-Channel 2.0" (Order item 29)

24 20541.0001 1 Heat Sink (Also order item 27)

01382.0007 2 Screw, Truss Head 6-32 x .38"

25 12565.0011 1 Triac Assy, 40 amp

02328.0003 1 Screw, Pan Head #6-32 x .312"

01520.0000 1 Lockwasher #6

26 21801.0002 1 Tube .375" O.D.

27 M2522.1000 - Heat Sink Compound

28 03236.1001 - Tube, Silicone .312" I.D. x 36.0"

03236.1003 - Tube, Silicone .312" I.D. x 60.0"

03236.1002 - Tube, Silicone .312" I.D. x 120.0"

29 02434.1000 - U-Channel 18.0" (Use as required)

* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

Not illustrated

DIR Num: 36096.0001 06, November 2014

36096 061212

+ 18 hidden pages