Bunn ICB-DV Parts Manual
RELEASED FOR PRODUCTION
ICB SERIES
Infusion Series
with Smart Funnel
Supercedes Illustrated Parts Catalogs:
37078.0000; 38112.0002; 39830.0000
®
®
ILLUSTRATED PARTS CATALOG
Designs, materials, weights, specifications, and dimensions for equipment or replacement parts
are subject to change without notice.
BUNN-O-MATIC CORPORATION
POST OFFICE BOX 3227
SPRINGFIELD, ILLINOIS 62708-3227
PHONE: (217) 529-6601 FAX: (217) 529-6644
39830.0400A 03/14 ©2014 Bunn-O-Matic Corporation
DIR Num: 39830.0400 19, May 2014
BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY
Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:
1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCR/MCP/MCA single cup brewers, thermal servers and ThermoFresh® servers (mechanical and digital) 1 year parts and 1 year labor.
2) All other equipment - 2 years parts and 1 year labor plus added warranties as specified below:
a) Electronic circuit and/or control boards - parts and labor for 3 years.
b) Compressors on refrigeration equipment - 5 years parts and 1 year labor.
c) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis - parts and
labor for 4 years or 40,000 pounds of coffee, whichever comes first.
These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be
commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the
applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured
by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation,
improper maintenance or repair, non periodic cleaning and descaling, equipment failures related to poor water quality,
damage or casualty. In addition, the warranty does not apply to replacement of items subject to normal use including but
not limited to user replaceable parts such as seals and gaskets. This warranty is conditioned on the Buyer 1) giving BUNN
prompt notice of
any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office Box
3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized
BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make
modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such
individuals, whether oral or written, do not constitute warranties and should not be relied upon.
If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the
applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair
is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for
the equipment.
THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS
EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION
AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.
In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of
use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities
or services, or any other special, incidental or consequential damages.
392, A Partner You Can Count On, Air Infusion, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, BrewWISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with
the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design,
Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet
Juice, High Intensity, iMIX, Infusion Series, Intellisteam, My Café, Phase Brew, PowerLogic, Quality Beverage Equipment
Worldwide, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee.com,
Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in
Beverage Equipment Worldwide, ThermoFresh, Titan, trifecta, TRIFECTA (sylized logo), Velocity Brew, Air Brew, Beverage
Bar Creator, Beverage Profit Calculator, Brew better, not bitter., Build-A-Drink, BUNNSource, Coffee At Its Best, Cyclonic
Heating System, Daypart, Digital Brewer Control, Element, Milk Texturing Fusion, Nothing Brews Like a BUNN, Picture
Prompted Cleaning, Pouring Profits, Signature Series, Sure Tamp, Tea At Its Best, The Horizontal Red Line, Ultra are either
trademarks or registered trademarks of Bunn-O-Matic Corporation. The commercial trifecta® brewer housing configuration is a trademark of Bunn-O-Matic Corporation.
RELEASED FOR PRODUCTION
2
39830.04 031314
DIR Num: 39830.0400 19, May 2014
RELEASED FOR PRODUCTION
TABLE OF CONTENTS
HOOD ASSEMBLIES .....................................................................................................................................4
TRUNKS
BASES
TANK SUPPORT BRACKETS - TWINS
TANK AND COMPONENTS
TANK FILL/DRAIN
DISPENSE/BYPASS VALVES, SPRAYHEAD, & FAUCET
ELECTRICAL AND OPERATING CONTROLS
FUNNELS
NUMERICAL INDEX
........................................................................................................................................................6
...........................................................................................................................................................8
........................................................................................................ 10
........................................................................................................................ 12
.......................................................................................................................................14
............................................................................. 16
.............................................................................................. 20
.................................................................................................................................................. 26
.................................................................................................................................. 28
To order coffee filters, water filters, or other accessories, refer to Specification Sheets at www.bunn.com
ICB-DV ......................................................................................................................Dual Voltage Brewer
ICBA ................................................................................................................................ 230 Volt Brewer
ICBB ................................................................................................................................ 200 Volt Brewer
ICBC-DV .................................................................................................... Canadian Dual Voltage Brewer
ICB-LP ........................................................................................................................Low Profile Brewer
Fraction Decimal Fraction Decimal
1/16 0.063 9/16 0.563
1/8 0.125 5/8 0.625
3/16 0.188 11/16 0.688
1/4 0.250 3/4 0.750
5/16 0.313 13/16 0.813
3/8 0.375 7/8 0.875
7/16 0.438 15/16 0.938
1/2 0.500 1 1.000
3
DIR Num: 39830.0400 19, May 2014
39830.04 062012
RELEASED FOR PRODUCTION
HOOD ASSEMBLIES
4
6
1
ICB Series
2
3
2
4
5
6
3
* Indicates the part number listed is for reference only.
DIR Num: 39830.0400 19, May 2014
P3820.50
4
39830.04 102913
RELEASED FOR PRODUCTION
HOOD ASSEMBLIES
ITEM PART NO. QTY. QTY. DESCRIPTION
TWIN SINGLE
1 36639.0007 - 1 Hood, SST - 20.7˝ Depth (1 Top Screw) (Models w/funnel lock only)
36639.0010 - 1 Hood, SST - Low Profile (2 Top Screws)
36639.0011 - 1 Hood, SST - 19.9˝ Depth (2 Top Screws) (No Funnel Lock)
36639.0012 - 1 Hood, BLK - 19.9˝ Depth (2 Top Screws) (No Funnel Lock)
37920.0002* 1 - Hood, SST - 21.8˝ Depth (Not Available)
37920.0003* 1 - Hood, BLK - 21.8˝ Depth (Not Available)
37920.0106 1 - Hood, SST - 19.85˝ Depth
37920.0107 1 - Hood, BLK - 19.85˝ Depth
37920.0108 1 - Hood, SST - Low Profile
02308.0000 20 10 Screw, Pan Head #8-32 x .38˝
2 37870.1000 1 - Cover, Top (Includes 5-7) (For use with 21.8˝ Hood)
37870.1009 1 - Cover, Top (Includes 5-7) (For use with 19.8˝ Hood)
37870.1010 - 1 Cover, Top - Tall & Standard (2 Top Screws)
37870.1017 - 1 Cover, Top - Low Profile (2 Top Screws)
36355.1006 - 1 Cover, Top - 19.9˝ (Includes 5-6) (1 Top Screw)
36355.1013 - 1 Cover, Top - 20.7˝ (Includes 5-6) (Models w/funnel lock only) (1 Screw)
01308.0003 2 2 Screw, Truss Head BLK #6-32 x .25˝
3 37881.0000 - 1 Decal, No Serviceable Parts
4 25151.0002 - 1 Shield, Insulator
25151.0003 1 - Shield, Insulator
5 37299.0001 1 - Schematic, 120/240V
37299.0004* 1 - Schematic, 230V
6 37967.0000 1 - Bracket, Tank Support, Twin (Upper)
01308.0002 2 Screw, Truss Head #6-32 x .25˝
36608.0001 - 1 Bracket, Tank Support, Single
01317.0003 - 2 Screw, Truss Head #8-32 x .375˝
]--
Early models only. Late model schematics
installed on front access panel.
* Indicates the part number listed is for reference only.
DIR Num: 39830.0400 19, May 2014
5
39830.04 102913
RELEASED FOR PRODUCTION
TRUNKS
ICB Series
Early model trunks with first type Water Inlet Valve
are no longer available - order new style as listed
1
8
9
10
12
13
9
11
8
Tall Single Shown
1
2
3
4
5
6
7
Trunk with flange
facing front for 21.8˝
Twin hood shown
* Indicates the part number listed is for reference only.
DIR Num: 39830.0400 19, May 2014
P3821.50
6
39830.04 061213
RELEASED FOR PRODUCTION
TRUNKS
ITEM PART NO. QTY. QTY. DESCRIPTION
TWIN SINGLE
1 36637.1004 - 1 Trunk, 20.8˝ SST (Includes 8,9,12,13) w/Rocker Sw.
36637.1005 - 1 Trunk, 20.8˝ BLK (Includes 8,9,12,13) w/Rocker Sw.
36637.1011 - 1 Trunk, Low Profile Single
36637.1012 - 1 Trunk, 20.8˝ SST (Includes 8,9,12,13) w/Toggle Sw. & Side Faucet
36637.1013 - 1 Trunk, 20.8˝ BLK (Includes 8,9,12,13) w/Toggle Sw. & Side Faucet
39453.1000 - 1 Trunk, 29.0˝ SST (Includes 8,9,12,13) w/Rocker Sw.
39453.1001 - 1 Trunk, 29.0˝ SST (Includes 8,9,12,13) w/Toggle Sw.
39453.0006* - 1 Trunk, 29.0˝ SST w/Toggle Sw. & Side Faucet (Not available)
37951.1004* 1 - Trunk, 20.8˝ BLK (No longer available) (For use with 21.8˝ Hood)
37951.1005* 1 - Trunk, 20.8˝ SST (No longer available) (For use with 21.8˝ Hood)
37951.0008* 1 - Trunk, 20.8˝ SST (Not available) (w/Rocker Sw. & Side Faucet)
37951.1009 1 - Trunk, 20.8˝ SST (125/250V) (Includes 8-10,13) (For use with 19.8˝ Hood)
37951.1106 1 - Trunk, 20.8˝ BLK (125/208V) (Includes 8-10,13) (For use with 19.8˝ Hood)
37951.1009 1 - Trunk, 20.8˝ SST (w/Side Faucet) (Includes 8-10,13) (Use with 19.8˝ Hood)
37951.1010 1 - Trunk, 20.8˝ BLK (w/Side Faucet) (Includes 8-10,13) (Use with 19.8˝ Hood)
39455.1000 1 - Trunk, 29.0˝ SST (125/250V) (Includes 8-10,13) (For use with 21.8˝ Hood)
39455.1002 1 - Trunk, 29.0˝ SST (w/Side Faucet) (Includes 8-10,13) (For use with 19.8˝ Hood)
39455.1003 1 - Trunk, 29.0˝ SST (w/Side Faucet) (Includes 8-10,13) (w/Side Faucet)
42407.1002 1 - Trunk, Low Profile
02308.0000 10 8 Screw #8-32 x .38˝
2 36643.1000 - 1 Panel, SST, 20.8˝ (ICB-DV) (Includes 3-7)
36643.1001 - 1 Panel, SST, 20.8˝ (ICBA, B, & CE) (Includes 5 & 7)
36643.1002 - 1 Panel, BLK, 20.8˝ (ICB-DV) (Includes 3-7)
36643.0002* - 1 Panel, Low Profile (Not available)
39450.1000 - 1 Panel, SST 29.0˝ (ICB-DV) (Includes 3-7)
37865.1000 1 - Panel, SST 20.8˝ (Standard Twin) (For use with 21.8˝ Hood) (Includes 4-7)
37865.1001 1 - Panel, BLK 20.8˝ (Standard Twin) (For use with 21.8˝ Hood) (Includes 4-7)
37865.1002 1 - Panel, SST 20.8˝ (Standard Twin) (For use with 19.8˝ Hood) (Includes 4-7)
37865.1003 1 - Panel, BLK 20.8˝ (Standard Twin) (For use with 19.8˝ Hood) (Includes 4-7)
39541.1000 1 - Panel, SST 29.0˝ (Tall Twin) (For use with 21.8˝ Hood) (Includes 4-7)
39541.1002 1 - Panel, SST 29.0˝ (Tall Twin) (For use with 19.8˝ Hood) (Includes 4-7)
42408.0000 1 - Panel, Low Profile
01311.0001 6 6 Screw, Truss Head, Locking #8-32 x .25˝ (SST)
01311.0004 6 6 Screw, Truss Head, Locking #8-32 x .25˝ (BLK)
3 29710.0011 - 1 Decal, Optional Field Wiring (ICB-DV Only)
29710.7011 - 1 Decal, Optional Field Wiring (ICBC-DV Only)
4 00658.0000 1 1 Decal, Warning-Decanter/Funnel
5 39175.0000 1 1 Decal, Warning Overlay Graphic
6 37881.0000 1 1 Decal, No User Serviceable Parts
7 37299.0000 - 1 Schematic, ICB-DV
37299.0005 1 - Schematic, 120/240VAC (All Twins w/External Triacs)
37299.0006 - 1 Schematic, (All DV w/External Triacs)
8 00656.0001 1 1 Decal, Compliance To Plumbing Code
9 00986.0000 1 1 Decal, Warning-Electrical
10 38125.0000 1 - Decal, Warning-Plug (125/250V)
11 34072.0000 - 1 Decal, Power Cord Warning (ICB-DV Only)
12 29007.0000 2 - Decal, Warning-Hot Water
13 00619.0007 2 - Plug, Hole .5”
7
* Indicates the part number listed is for reference only.
DIR Num: 39830.0400 19, May 2014
39830.04 102913
RELEASED FOR PRODUCTION
10
BASES
ICB Series
First style bases
not available
4
5
4
1
2
Tall Twin
Tall Single
9
6
10
3
Standard Single
9
Standard Twin
1
8
6
8
7
Low Profile Single
Low Profile Twin
* Indicates the part number listed is for reference only.
DIR Num: 39830.0400 19, May 2014
P3822.33
8
39830.04 061213
RELEASED FOR PRODUCTION
BASES
ITEM PART NO. QTY. QTY. DESCRIPTION
TWIN SINGLE
1 36635.0002 - 1 Base, Standard Single
36635.0003 - 1 Base, Standard Single (for use with external triacs)
39615.0000 - 1 Base, Tall Single
39615.0002 - 1 Base, Tall Single (for use with external triacs)
37866.0001* 1 - Base, Standard Twin (For use with 21.8˝ Hood)
39594.0000 1 - Base, Tall Twin (21.8˝) (For use with 21.8˝ Hood)
37866.0003 1 - Base, Standard Twin (For use with 19.8˝ Hood)
39594.0002 1 - Base, Tall Twin (19.8˝) (For use with 19.8˝ Hood) Early Models
39594.0004 1 - Base, Tall Twin (19.8˝) (For use with 19.8˝ Hood) (external triacs)
42361.0000 1 - Base, Low Profile Twin
42361.0001 - 1 Base, Low Profile Single
2 25137.0001 6 4 Foot (Add 2 for Tall Single, Add 4 for Tall Twin)
3 37274.0001 2 1 Server Stop
02308.0000 4 2 Screw, Pan Head #8-32 x .38"
01503.0000 4 2 Washer
4 36361.0000 2 1 Trim, Base Cover
01308.0002 4 2 Screw, Truss Head, Locking #6-32 x .25"
02332.0005 4 2 Screw, Hex #6 x .38"
5 37926.0000* 1 - Spacer
6 42522.0000 1 - Guard, Server
42522.0001 - 1 Guard, Server
38044.0000 4 3 Screw, PNH 6x.375
7 42370.0000 1 - Leg Weldment, Center Support
42370.0001 - 1 Leg Weldment, Side Support
02313.0002 2 2 Screw, Hex Cap .375-16x.625
42537.0000 2 2 Lock Washer, Split .375 SST
00731.0000 1 1 Foot, Rubber
01311.0001 1 1 Screw, TRH SLTD SST 8-32x.25
8 40041.1000 4 3 Kit, Leg
40042.0000 4 3 Pad, Anti Skid
9 38344.0002* - 1 Bracket Weldment (Terminal Block)
02308.0000 2 2 Screw, Pan Head #8-32 x .38”
10 47384.1001 - 1 Component Mounting Bracket (Includes decals) NOT FOR LOW PROFILE
47562.0001* 1 - Component Mounting Bracket (Not Available) NOT FOR LOW PROFILE
02308.0000 2 2 Screw, Pan Head #8-32 x .38”
* Indicates the part number listed is for reference only.
DIR Num: 39830.0400 19, May 2014
9
39830.04 070313
Loading...