Bunn FMD-1A User Manual
INTERNATIONAL
Steam Collector
Mixing Chamber
Whipper Chamber
Receptacle
Whipper
Chamber
O-ring
Frother
Dispense
Tip
R
E
L
E
A
S
E
B
U
T
T
O
N
W
H
E
N
C
U
P
I
S
2
/
3
F
U
L
L
P
L
A
C
E
C
U
P
H
E
R
E
ITE M#
Fresh Mix Dispenser
with 1 or 2 Hoppers
Features
Fresh Mix Dispensers
• Space saving narrow 8” (20.3 cm) cabinet width.
• Variable speed hopper motors offer a wide range of product mix ratios (.75
to 6.6 grams of powder per second).
• Large easy-to-fill translucent hoppers ensure quick and timely refilling.
FMD-1 = one 8 lbs. (3.6 kg)
FMD-2 = two 4 lbs. each (1.8 kg)
• Lighted graphics merchandise drinks for maximizing profits.
• Large hot water reservoir provides 4.2 gal. (15.9 L)/hour serving capacity.
• Adjustable legs and drip tray allows up to 7” (17.8 cm) opening for
591.5 mL (20 oz.) cups.
• Specially designed mixing system guarantees perfect beverages every time.
• Improved automatic rinse reduces run-on after beverage is dispensed.
• Designed to be easily serviced from front and top of machine.
PROJECT
DATE
FMD-1
FMD-1 & FMD-2
Dimensions: 30”H x 7.9”W x 21”D
(76.2cm H x 20.1cm W x 53.3cm D)
FMD-2
For current specification sheets and other information, go to www.bunn.com.
Related Products
Easy Clear® EQHP-10
Product No. : 39000.0004
Easy Clear® EQHP-10L
Product No. : 39000.0001
Features deluxe whipper chambers:
1. Robust whipper to ensure full flavor yield.
2. Specially designed self cleaning mixing
chamber.
3. Exhaust fan to siphon off moisture that
can cause powder buildup.
4. Hot water dispense for easy clean-out.
5. Quick disconnecting parts for thorough
sanitizing.
Single hopper
model shown.
Patents Apply
12/06
D3
Dimensions & Specifications
Model Product # Volts Amps Tank Heater Total Brewing Shipping Cord Agency
Watts Watts Capacity Weight Attached
FMD-1A BLK SET00.0250 230 7.5 1700 1800 4.2 gal./hr.** 75 lbs. Yes
15.9 L/hr. (34 kg)
FMD-2A BLK SET00.0252 230 7.5 1700 1800 4.2 gal./hr.** 81 lbs. Yes
15.9 L/hr. (36.7 kg)
**Based on incoming water temperature of 50ºF/10˚C.
Electrical: Model requires 2-wires plus ground service rated 220-240V, single phase, 50/60 hz.
Plumbing: 20-90 psi (138-621 kPa) from a
3
⁄8" or larger supply line. A shut-off valve should be installed in the line
before the unit. Install a regulator in line when pressure is greater than 90 psi to reduce it to 50 psi. Supplied
with 1⁄4" male flare fitting.
Bunn-O-Matic® Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • USA • +1-217-529-6601 • Fax +1-217-529-2827 • www.bunn.com
BUNN® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
All dimensions shown in centimeters. Bunn-O-Matic Corporation owns all copyrights relating to materials in this publication. Please contact BUNN to request permission to reproduce any portion of this publication.
Loading...