Job No. 2829
Client BT
Project BTVBM630 Baby Monitor User Guide
Revision 3-DR
Modied 20/10/15
Created 21/08/15
BT Video Baby Monitor 630
User Guide
2
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
Contents
Important safety notices
1. Your baby monitor is designed as just an aid. It isn’t a substitute for responsible and proper adult supervision.
2. Make sure all cables and units are out of your baby’s reach – at least one metre away.
3. Never cover either unit, put them in moist places or inside the cot, bed or playpen.
4. If you travel abroad, check the voltage on your unit’s plugs match the local power output.
5. Only use the battery supplied for the Parent unit. If you need to replace it, contact our helpdesk.
6. Do not take the product apart. If you need repairs, get in touch with our helpdesk.
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Getting set up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Get to know the Baby unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Get to know the Parent unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Test in g th e vi de o an d au di o . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Parent unit on-screen icons . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Parent unit menu overview . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Using the Parent unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Using the Baby unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Using Lullabies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
New addition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Help and troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
3
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
Welcome
Thanks for buying a BT Baby Monitor.
You’llsoon be able to relax knowing you can
watch and listen for your baby’s every breath,
gurgle and wriggle.
But rst things rst. To get set up, just follow the steps over
the page. Set-up only takes a few minutes.
Then, you can learn all about your monitor and how to use it
from page 7.
Need some help? No problem – give us a call on
0800 218 2182*, or go to bt.com/producthelp.
* Calls made from within the UK mainland are free.
Mobile and international call costs may vary.
1
Take the battery cover o the Parent unit by sliding and lifting it. Check the battery
wire is connected to the socket inside the monitor. Put the battery cover back on by
sliding it towards the middle of the unit until it clicks into place.
Tip
To replace the battery, pull
it out of the compartment
and unplug the battery
connector from the socket.
Then follow the instructions
in step 1 to install it.
Tip
The rst time you use the
Parent unit, or if you haven’t
used it for a long time, it’ll
take 12 hours to fully charge.
When the battery gets very
low, it’ll take about 30
minutes to charge enough
for you to use it for a short
time.
To charge the Parent unit in
the shortest amount of time,
turn it o while it’scharging.
Getting set up
4
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
2
To charge the Parent unit, plug the
cable into the Parent unit, then plug
it into the mains power socket and
switch the socket on.
Leave to charge for 12 hours.
Getting set up
Tip
Keep the power cord out of
baby’s reach by looping any
extra length and securing it.
3
Place the Baby unit near a power socket in the room where you’re going to be
monitoring your baby most of the time. It should also be at least one metre away
from your baby.
4
Plug the cable into the Baby unit, then plug it into
the mains power socket and switch the socket on.
5
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
5
If you like, you can attach your Baby monitor to a wall. (Remember to check the
reception and position before you do that – you won’t be able to adjust it afterwards.)
Find out more about how to do that on page 24.
Getting set up
6
After the Parent unit has charged
for 12 hours you can switch it on.
Before you do, move the Parent
unit at least one metre from the
Baby unit. Any closer and you
might get audio feedback sounds.
It is also advisable to turn the Baby
unit volume down to a minimum to
stop any feedback. See page 20.
Press and hold down the Power
on/o
button for about two
seconds.
6
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
When does near become
too far?
The maximum range
between your Parent and
Baby units is about 300
metres outdoors and about
50 metres indoors. Thick
walls and doors reduce the
units’ range and aect how
they link to each other.
The battery status icon will appear on the screen. If the battery icon is solid in
colour, the Parent unit is fully charged and you can start using it.
If the battery icon is half full, or ashing, that means it only has enough charge to be
used for a short time, so you’ll need to charge it again for about 30 minutes.
If a power plug icon appears instead of the battery icon, that means the battery is
either completely empty or isn’t installed right.
7
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
Get to know the Baby unit
7
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
Control key panel
Power on/o
Press and hold to turn the Baby
unit on and o.
Pair
Press and hold this to link the
Baby unit to the Parent unit.
Vol+ and Vol-
Press these to increase and
decrease the listening volume.
Play/Pause
Press to play and stop playing
lullabies.
Skip
Press to skip to the next lullaby.
Camera
Infrared LED lights
These are backup lights for
nightvision.
Power on/o light
If the light is on, the Baby unit
is powered and linked with
the Parent unit. If the light is
ashing, either the Baby unit
isn’t linked with the Parent unit
or the units are still trying to
link to each other.
Microphone
Stand
Tilt to adjust the camera angle.
8
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
Get to know the Baby unit
Speaker
Temperature
sensor
Power socket
9
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
Get to know the Parent unit
Sound level display
These LED lights show the level
of sound being detected from the
Baby unit. When they’re green,
the unit is detecting a moderate
sound. When they’re red, the unit
is detecting a louder sound.
They also show you how loud the
volume is when you’re adjusting
the Parent unit’s speaker volume.
Green is quieter (level 1-3) and
red is louder (level 4-5).
Battery level light
This light turns on when the
Parent unit is being charged.
It ashes when the battery is low.
It turns o when the battery’s fully
charged.
Power on/o light
This light turns on when the
Parent unit is on. It ashes when
the Parent and Baby units are
linking up, or if it can’t detect
the Baby unit.
10
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
Get to know the Parent unit
Control key panel
Vol+/up arrow
Press to increase the speaker volume.
Press to scroll up when you’re in the menu.
Press and hold to move the camera image
up if it’s zoomed in.
Zoom out/left arrow
Press to zoom out when you’re
looking at a camera image.
Press and hold to move the camera
image left if it’s zoomed in.
Press to choose the option on the
left when you’re in the menu.
Menu/Select
Press to open the menu.
Press to select an icon or save a
setting when you’re in the menu.
Tal k
Press and hold to talk to your
baby through the Baby unit.
Zoom in/right arrow
Press to zoom in when you’re
looking at a camera image.
Press and hold to move the camera
image right if it’s zoomed in.
Press to choose the option on the right
when you’re in the menu.
Power on/o
Press and hold to turn the
Baby unit on and o.
Vol-/down arrow
Press to decrease the speaker volume.
Press to scroll down when you’re in
themenu.
Press and hold to move the camera
image down if it’s zoomed in.
11
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
Get to know the Parent unit
Slot for optional wrist strap
Battery compartment cover
Power socket
12
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
Testing the video and audio
Once the Baby and Parent units are set up, the rst thing to do is check the video and
audio are working as they should be. It’s also a good idea to do that if you haven’t used
them for a while.
To do that:
1
with the Parent and Baby units in the same room, at least one metre away from each
other, press the button on the Baby unit. The power light should turnon
2
press and hold the button on the Baby unit again. The power light should turn o
3
press and hold the button on the Parent unit. The screen should turn on
4
press and hold the button on the Parent unit again. The screen should turn o.
Tip
To test the sound, adjust the
volume and sound sensitivity
levels so you can pick up the
sound in your baby’s room.
To test the video, adjust
the sound activation to
maximum (level 5) so the
video stays on to test,
then adjust so the Parent
unit screen turns o
automatically when no
sound is detected from the
Baby unit within 20 seconds.
13
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
Connection strength
This shows how strong a signal the Parent unit is
picking up from the Baby unit.
Current unit view
This shows the number of the Baby unit you’re looking
at (if you’ve got more than one).
Split screen
In this view, you’ll see all Baby units at once.
Zoom
This appears if the camera image is zoomed in.
Lullaby
This appears if the Baby unit is playing a lullaby.
Mute
This appears if the volume is turned o.
Sound activation
This appears if the Baby unit has detected sound in your
baby’s room. When that happens, the camera image
automatically turn on.
Te mp era tu re
This shows the temperature in your baby’s room.
Battery life
This shows how much battery you have left. A plug
symbol will appear if you’re using the Parent unit when
plugged in. It will ash when the battery is charging.
Parent unit on-screen icons
14
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
Camera
If you’ve got more than one Baby unit, use this screen
to see the camera image from an individual Baby unit or
see all Baby units by choosing split screen.
Zoom
Zoom in and out when you’re looking at the
camera image.
Brightness
Change the brightness of the screen.
Sound Sensitivity
Change how sensitive the sound detection is on your
Baby unit.
Sound activation
Check on your baby whenever there is noise in their
room. You can choose to have the sound on or o.
Lullabies
The Baby unit has ve lullabies it can play to your baby.
You can choose which one to play, or play them all, from
here.
Temp er at ur e
Choose whether you see the temperature in °C or °F.
Pairing
The Parent and Baby units are already linked, but if you
get another Baby unit, or replace the one you’ve got,
you can add it to your baby monitoring system using
this option.
Parent unit menu overview
15
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
You can use the Parent unit to set up and adjust the settings of the baby monitor system.
You’ll need to make any changes when the unit’s not in use.
How to turn it on and o
Press and hold the button for about two seconds. The screen will turn on. Press and
hold the button again to turn the Parent unit o.
How to turn the screen on and o
If you want to turn o the screen but keep the Parent unit on so it will still pick up any
sounds from your baby’s room, press the
button once. Press it again at any time to
turn the screen back on.
How to open and use the menu
The menu is where you can make most changes to the baby monitor system.
To do that:
1
press Menu/Select
2
move around the menu items using the and arrows until
you’re on the feature you want to change
3
press Menu/Select again to open that feature
4
use the and arrows to make the changes you want within that feature
5
press the Menu/Select button to conrm and close the menu.
Using the Parent unit
16
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
Using the Parent unit
How to change the brightness of the screen
The default screen brightness is level 3, which is the middle setting.
To change it:
1
press Menu/Select
2
use the and arrows to scroll to the
3
use those buttons again to adjust the brightness to the level you prefer
4
press Menu/Select to conrm and close the menu.
How to change the speaker volume
The Parent unit has ve volume settings, or you can turn o the sound completely.
Tochange the volume, simply press the Vol+ or Vol- buttons.
How to change the sound sensitivity
You can use the Parent unit to adjust how sensitive the Baby unit will be when picking up
noise from your baby’s room. The default setting is level 3, which is the middle setting.
Raising it to level 5 means the Baby unit will pick up any sound from your baby’s room,
including background noise. Lowering the level to between 1 and 4 means you’ll only hear
when your baby’s making a lot of noise or crying loudly.
17
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
Using the Parent unit
To change it:
1
press Menu/Select
2
press the and arrows to scroll to
3
press the and arrows to choose the level youwant
4
press Menu/Select to conrm.
How to set the screen to turn on and o automatically
You can set the screen to only turn on when the Baby unit is picking up sounds. On this
setting, the screen will turn o automatically when there are no sounds for 20 seconds.
To do that:
1
press Menu/Select
2
press the and arrows to scroll to
3
press the and arrows to choose either (automatic screen setting on) or
(automatic screen setting o)
4
press Menu/Select to conrm.
(You’ll also hear a beep when the screen automatically turns on and o.)
18
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
How to zoom in and out
You can set the screen to only turn on when the Baby unit is picking up sounds. On this
setting, the screen will turn o automatically when there are no sounds for 20 seconds.
To do that:
1
press Menu/Select
2
press the and arrows to scroll to
3
press the and arrows to choose to zoom in or to zoom out
4
press Menu/Select to conrm.
Or you can use and
How to talk to your baby using the monitor
To give your baby some words of comfort, press and hold the Talk button and speak into
the Parent unit’s microphone.
Using the Parent unit
19
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
How to change the temperature format
To make sure your baby’s room is at a comfortable temperature, your handy baby monitor
will let you know if it’s getting too hot or too cold.
To change whether the temperature shows in °C or °F:
1
press Menu/Select
2
press the and arrows to scroll to
3
press the and arrows to choose °C or °F
4
press Menu/Select to conrm.
How to make it portable
You can attach a strap to your Parent
unit to save you carrying it. On the back
of the unit, you’ll nd a hook where you
can attach it.
Using the Parent unit
Note
Carrying strap is not included.
Make sure the Parent unit
battery is installed and
charged before unplugging
the power adaptor.
20
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
How to turn it on and o
Press the button. The power light will turn on. Press and hold the button again to
turn the Baby unit o. The power light will also turn o.
How to change the speaker volume
The Baby unit has ve volume settings. The default setting is level 3. To change the
volume, simply press the Vol+ or Vol- buttons. This will also change the volume of a
lullaby that’s playing.
About night vision
So that you can see your baby at night, the Baby unit automatically uses the light from
its infrared LED lights to capture images in a dark room. Because of that, it can only show
images in black andwhite.
How to reset settings to default
You can reset the Baby unit’s settings using the Parent unit. To do that:
1
press and hold Menu/Select on the Parent unit
2
while holding down Menu/Select, press the button three times
3
let go of Menu/Select and then press it again within one second.
Using the Baby unit
Tip
Switching to night mode
is automatic, activation is
dependent on the light level
in the rooms.
In night mode your picture
will change to black and
white.
21
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
Using Lullabies
Music can entertain your baby or help them drift o to sleep. You can choose from ve
lullabies. If you select one lullaby, it will play on repeat for about 20 minutes. If you pause
and press play again, it will pick up where it left o. Or, you can choose to play all ve
lullabies in sequence.
On the Parent unit:
1
press Menu/Select
2
press the and arrows to scroll to
3
press the and arrows to choose the lullaby you’d like to play
4
choose to play all ve lullabies in a row
5
choose symbol to stop playing them
6
press Menu/Select to conrm.
On the Baby unit:
1
press the Play button
2
press the Skip button to skip to the next lullaby
3
press the Play button to stop playing lullabies.
When you’re talking to your baby through the monitor, lullabies will stop playing.
They’llstart playing again when you’ve nished.
22
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
How to link a new Baby unit
The Baby and Parent units are already linked. But if you have more than one baby, or if
you want an extra Baby unit in a dierent room (like if baby’s playpen is in a dierent room
from their cot), you can add more (up to four) Baby units to one Parent unit.
To link a new Baby unit:
1
set up the new unit as explained at the beginning of this guide
2
press Menu/Select
3
press the or arrows to scroll to
4
press the or arrows to choose the slot for your new Baby unit.
5
press Menu/Select. The screen will show
6
if you choose a slot that’s already being used, the monitor will replace the old Baby
unit with the new one in that slot
7
turn on your new Baby unit
8
press and hold Pair until the power light ashes. The screen will show once
that’sdone
9
You’ll then see the camera image for the new Baby unit.
New addition?
Tip
You can link up a maximum
of four Video Baby Monitor
630 cameras to the Parent
unit.
23
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
How to disconnect a Baby unit from the Parent unit
1
press Menu/Select
2
press the or arrows to scroll to
3
press the or arrows to choose the Baby unit you’re disconnecting
4
press and hold Talk on the Parent unit until and appear
5
press the or arrows and either choose to cancel or to conrm
6
press Menu/Select to conrm.
How to switch between individual Baby units and split screen
To view an individual Baby unit:
1
press Menu/Select
2
press the or arrows to scroll to
3
press the or arrows to choose the number of the Baby unit you want to see. Or
you can choose to see them all at the same time
4
press Menu/Select to conrm.
New addition?
24
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
If you have any problems setting up or using
your baby monitor, see if these common
questions can help.
How do I attach my Baby unit to a wall?
You’ll need some screws and wall plugs – they don’t come
with your baby monitor. The screw heads will need to t the
keyholes on the base to support the Baby unit.
Here’s what to do.
1
Make sure the wall can support the Baby unit.
2
Make sure the power plug can reach the power socket and
it is out of your baby’s reach.
3
Check the reception strength and the camera angle of the
Baby unit.
4
Check that you aren’t drilling into any hidden wiring or
plumbing. BT isn’t responsible for any damage or injury
caused while trying to wall mount your Baby unit.
5
Use a pencil to mark two parallel holes where you want
your Baby unit on the wall. Make sure the holes are the
same distance apart as the keyholes in the bottom of the
Baby unit.
6
Drill two holes where you’ve made themarkings.
Insertwall plugs, if required.
7
Insert the screws into the holes and tighten until only
approximately
1
/
4
inch of the screw is visible.
8
Line up the keyholes on the base of the Baby unit with the
screws in the wall. Slide the Baby unit down until it locks
into place.
Help and troubleshooting
Keyhole
25
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
Help and troubleshooting
My Parent/Baby unit isn’t working. What should I do?
Check that:
1
power cables are plugged in and switched on at the
wallsocket
2
the Baby unit is plugged in and the Parent unit battery is
installed correctly and fully charged (for 12 hours)
3
both units are turned on
4
the Parent unit isn’t too far from the Baby unit(s) (large
obstructions or other electrical devices might aect the
signal between the parent and Baby unit).
5
if the Parent unit battery is run down, that you charge it
for 30 minutes before trying it again.
Sometimes unplugging the power cables, waiting about 15
seconds, and then plugging them back in can help. If you do
that, you’ll need to allow about a minute for Parent and Baby
unit(s) to link.
My Parent/Baby unit is making a high-pitched noise.
Whatshould I do?
The units might be too close together. Make sure they’re at
least one metre apart, even when you’re using the Talkbutton.
You might also have set the sound sensitivity level too high –
try changing it to a lower level.
Why is my Parent unit beeping?
The Parent unit beeps when:
• the Baby unit is turned o
• the units are too far apart – try moving them closer
together (but not closer than one metre)
• the battery in the Parent unit isn’t charged – try charging it
for 12 hours
• Other electronic items, like TVs and mobile phones, are
causing interference – try moving the Baby unit away from
things like that.
My Parent unit plays too many sounds from the Baby unit or
is too noisy. What should I do?
You might have set the sensitivity level to 5. Try turning it
down to a lower level. Also, try turning down the volume on
the Parent unit.
26
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
Help and troubleshooting
Why isn’t my Parent unit playing any sounds even though
there’s noise coming from my baby’s room?
• The Parent unit might not be fully charged – make sure it’s
charged (for 12 hours). If that doesn’t help, try taking out
the battery and putting it back in (you’ll need to wait for a
minute or so for the Parent and Baby units to link again).
• The speaker volume might be switched o or the sensitivity
level set too low.
• The Parent unit might be too far away from the Baby unit
to pick up sounds – try moving it closer (but not closer than
one metre).
• Large obstructions or other electrical devices might be
aecting the signal between the Parent and Baby units).
Try moving the Baby unit away from obstructions, including
electrical appliances like TVs or mobile phones.
Baby is making a noise, but the Parent unit is not picking up
the sound
See ‘Sound sensitivity’ on pages 16–17.
The video link between the Parent unit and camera is losing
connection after 20 seconds
See the tip on page 12.
I keep losing the link between my Parent and Baby units and
there are sound interruptions. What should I do?
The Parent unit might be out of range – try moving the units
closer together.
You might need to reset the Parent and Baby units by turning
them o, unplugging the AC power, waiting for 15 seconds,
then plugging them back in. Then turn them back on and allow
them to link.
Still stuck?
Try bt.com/producthelp or call us on 0800 218 2182. Calls
to this number made from within the UK mainland network are
free. Mobile and international call costs may vary.
27
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
Cleaning
Your BT Video Baby Monitor 630 units have a durable plastic
casing that should keep their colour and nish for many years.
To clean, use only a soft cloth slightly dampened with water or
a mild soap. Don’t use too much water or cleaning solvents.
Taking care of your monitor
Try to always treat your units with care. The units can get
damaged if they get wet, so make sure not to use them outside
in the rain or near a sink, bath or shower.
Guarantee
Your BT Video Baby Monitor 630 is guaranteed for 12 months
from the date you bought it.
Subject to the terms listed below, the guarantee covers the
repair of – or at BT’s or its agent’s discretion, the option to
replace – the BT Video Baby Monitor 630 or any part of it
which is faulty or below standard, or as a result of inferior
workmanship of materials.
Products over 28 days old from the date of purchase may be
replaced with a refurbished or repaired product.
The conditions of this guarantee are:
• the guarantee shall only apply to defects that occur within
the 12-month guarantee period
• proof of purchase is needed
• the equipment is returned to BT or its agent as instructed
• this guarantee doesn’t cover the batteries and any faults
or defects caused by accidents, misuse, fair wear and tear,
neglect, tampering with the equipment, or any attempt at
adjustment or repair other than through approved agents
• this guarantee doesn’t aect your statutory rights.
Within the 12-month guarantee period
Before returning your equipment, please read Help and
troubleshooting starting on page 24 or contact us on
0800 218 2182*.
There’s also more help at bt.com/producthelp
In the unlikely event of a defect, we’ll issue a Fault Reference
Authorisation (FRA) number and instructions for replacement
or repair. You’ll need the FRA number when returning the
product. This doesn’t aect your statutory rights.
General information
28
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
Outside of the 12-month guarantee period
If your equipment needs repair after the guarantee period
or if you need technical assistance outside of the 12-month
guarantee period, call BT’s approved technical support agent,
Discount Communications Ltd on 0800 980 8999*.
Returning your product
If you call us and we can’t x your problem, we’ll give you a
Fault Reference Authorisation (FRA) number and ask you to
return the equipment to where you bought it. If possible,
please pack the equipment in its original packaging. Please
remember to include all parts, including cables and batteries.
For guarantee purposes, proof of purchase is needed – so
please keep your receipt.
How to recycle your equipment
Your baby monitor is classed as electrical or electronic
equipment, so DO NOT put it in your normal rubbish bin.
It’s all part of the Waste Electrical and Electronic Equipment
(WEEE) Directive to recycle products in the best way – to be
kinder to the planet, get rid of dangerous things more safely
and bury less rubbish in the ground.
You should contact your retailer or supplier for advice on how
to dispose of this product in an environmentally friendly way.
General information
29
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
General information
R&TTE
This product is intended for use in the UK.
This equipment complies with the essential requirements
for the Radio Equipment and Telecommunications Terminal
Equipment Directive 1999/5/EC.
Declaration of Conformance
Hereby, BT declares that this BT Video Baby Monitor 630 is
in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC. The Declaration
of Conformance can be found at bt.com/producthelp
User Guide formats
Call 0800 218 2182* to get this guide in Braille, large print
and audio CD.
* Calls to these numbers made from within the UK mainland
network are free. Mobile and international call costs may vary.
Offices worldwide
The services described in this publication are subject to availability
and may be modied from time to time. Services and equipment
are provided subject to British Telecommunications plc’s respective
standard conditions of contract. Nothing in this publication forms
any part of any contract.
© British Telecommunications plc 2015
Registered Oce: 81 Newgate Street, London EC1A 7AJ
Registered in England No. 1800000
Printed in China.
Written and designed by The Art & Design Partnership and Muse Publishing.
10/15. Issue 1
* Calls to these numbers made from within the UK mainland network are free.
Mobile and international call costs may vary.
For a Better Future
We’re always looking to make our products last longer
and use less power, so we don’t have such a big impact
on the environment.
To nd out about what we are doing, visit
bt.com/betterfuture
Free Technical Help & Support
*
bt.com/producthelp
Call us or go online if you have any
difficulties with your product
0800 218 2182
Loading...