Page 1
BT Versatility
V Phone
Page 2
Getting started
Inserting the Batteries
To use the Caller Display function on this telephone you will need to use
4 x AAA (1.5V) batteries. Before inserting the batteries please make sure that
the telephone line cord is disconnected.
1. Use a screwdriver or other flat tool to open the battery door underneath the product.
2. Insert the 4 x AAA (1.5V) batteries, making sure that each one is the correct way around.
3. Close the battery compartment door securely and plug in the telephone line cord.
Note: If the Low Battery icon appears on the display,
the batteries must be replaced to gain full use of all the product features.
Language Setting
1. Press and hold the Review and buttons simultaneously for 4 seconds.
2. Press the Review or button to scroll through the language options
3. Press the ‘Store’ button to confirm the language selection.
Display Contrast Setting
You will be prompted to set the Display Contrast immediately after you have set
the product ‘Languages’ setting above.
1. Press the or to adjust the contrast setting between 1 and 16.
2. Press the ‘Store’ button to confirm the setting.
Time and Date Setting
You will be prompted to set the display Time and Date immediately after you have
set the product ‘Contrast’ setting as above.
1. Press the or to change the Hour, then press ‘Store’
2. Press the or to change the Minute, then press ‘Store’
3. Select AM or PM, using the * or # key
4. Press the or to change the Day, then press ‘Store’
5. Press the or to change the Month, then press ‘Store’.
Storing a Number in the One-Touch Memories
When storing numbers in the memory locations, please keep the telephone
handset on hook.
1. Press the ‘Store’ button
2. Enter the numbers to be stored, using the keypad
3. Press the ‘Store’ button again
4. Press the memory location button where the number is to be stored (M1 – M7).
• 3 Line 16 Digit and 16 Character Display
• 99 Number Calls Log with Repeat Call Counter
• One-Touch Callback from the Calls Log
• New Call/Message Waiting Indicators
• Monitor
• 7 One-Touch Memories
• Dialled Number Display
• Last Number Redial
• Hearing Aid Compatible
• Ringer High/Low/Off Selector
• Ringer Tone Hi/Low Selector
• Handset Volume High/Normal Selector
• Store/Recall/Redial/Callback and
Monitor Buttons
Feature list
Page 3
Dialling a Stored Number
1. Pick up the handset or press ‘Monitor’.
2. Press the relevant one-touch memory button (M1 – M7)
Receiving and Storing Calls in the Calls Log
This product has a 99 number Caller Display Log and will store the Number,
Time and Date of your calls.
An ‘X’ will be displayed for Repeat Calls Log Entries.
When the Calls Log is full, the oldest call record will automatically be replaced
by a new Call.
Viewing Calls in the Calls Log
Press the Review button to view each new call.
When you have viewed all the new calls, ‘END OF LIST’ will be displayed.
Press the Review button to view the previous call record.
Call Back from the Calls Log
1. Press the or button to search for the entry you wish to Call Back.
2. Lift up the handset or press ‘Monitor’.
3. Press the ‘CALL BACK’ button.
Clear Button
1. Press the or button to search for the entry you wish to delete in the Calls Log.
2. Press the ‘Clear’ button twice to delete the Call Record.
3. To delete all the entries in the calls log, press and hold the ‘Clear’ button for
approximately 4 seconds, then release the button. Press the ‘Clear’ button again and
all the entries will be deleted.
Message Waiting
If a caller has left a voicemail message for you the text ‘MESSAGE WAITING’ will
appear on the display and the NEW/MSG LED will flash.
Redial/Pause Button
To redial the last number you dialled.
1. Pick up the Handset or press ‘Monitor’.
2. Press the ‘Redial’ button.
Recall Button
Press the ‘Recall’ button to use services such as Call Waiting and Call Transfer.
Special Message Indications
The following special message indicators show the current status of the product:
NO CALLS The Caller Display log is empty
UNAVAILABLE The call has originated from another network which does not
support the sending of Caller Display information.
WITHHELD The caller has withheld their Caller Display information.
END OF LIST There are no new Calls to be viewed.
X Repeat Call Indicator
Low Battery Indicator
New Call Indicator
Page 4
Connections that get results.
Offices worldwide
The telecommunications services described in this publication
are subject to availability and may be modified from time to time.
Services and equipment are provided subject to British
Telecommunications plc’s respective standard conditions of contract.
Nothing in this publication forms any part of any contract.
© British Telecommunications plc 2002
Registered office: 81 Newgate Street, London EC1A 7AJ
Registered in England No: 1800000
Produced by BT Business Information Systems Marketing
Designed by H&P Graphics Limited (10032)
PHME 42394/11/02
R&TTE Directive
Hereby, TMX declares that this
‘BT Versatility Telephone’ is in
compliance with the essential
requirements and other relevant
provisions of directive 1999/5/EC.
A copy of the Declaration of
Conformance for the ‘BT Versatility
Telephone’ is available from
TMX, Alpha Business Park,
28 White House Road, Ipswich, IP1 5LT.
Loading...