About .............................................................38
Specications ............................52
Amis S430/S630 User’s Manual
4
WARNING
Always consult your physician before you begin or modify any training program. Please read
the details in Warranty and Safety Information guide in the package.
FCC Regulations
§ 15.19 (a)(3)
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
§ 15.21
Changes or modications not expressly approved by the party responsible for compliance
could void the user‘s authority to operate the equipment.
§ 15.105 (b)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.•
Increase the separation between the equipment and receiver.•
Connect the equipment into an outlet on a circuit dierent from that to which the receiver •
is connected.
Consult the dealer or an experienced radio/TV technician for help.•
FCC RF Exposure Compliance
This device is designed and manufactured not to exceed the emission limits for exposure
to radio frequency (RF) energy set by the Federal Communications Commission for an
uncontrolled environment.
Amis S430/S630 User’s Manual
5
ENGLISH
IC Regulations
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
********************************************************************************************
CAN ICES-3(B)/NMB-3(B)
This equipment complies with IC RSS-102 RF exposure limits set forth for an uncontrolled
environment.
Australian Consumer Law
Our goods come with guarantees that can not be excluded under the New Zealand and
Australian Consumer Laws. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
Amis S430/S630 User’s Manual
6
Getting Started
10
12:05
18OC
09/06
MON
AM
35
This section will guide you on the basic preparations before you start using your device.
Your Amis S430/S630
1
2
1
Up (p/)
In Menu, press to move up to scroll •
through menu options.
Press to turn on the backlight.•
Down (q)
2
In Menu, press to move down to scroll •
through menu options.
In data page view, press to switch data •
page screen.
NOTE: In swimming mode, the Amis device
auto-locks the sensor keys (up and down
keys) to prevent false contact by the water.
In order to view the data page(s), please
wipe o excess water on the surface of
the watch and pause the recording before
operating the sensor keys. Press the power
key to resume the recording while pausing.
We highly recommend to lock the sensor
keys in humid environment.
3
4
3
Power / OK / Start / Lap (/)
P• ress and hold to turn the device on.
In clock view, press to enter the main •
menu.
In menu mode, press to enter or conrm •
a selection.
When recording, press to mark the lap.•
In clock view, press and hold to turn o •
the device.
In any modes, except clock view, press •
and hold to lock the Up and Down keys.
While the keys are locked, press and
hold to unlock.
4
Back / Pause / Stop (//)
Press to •return to the previous page or
cancel an operation.
In data page view, press to pause log. •
While the recording is paused, press
again to stop.
In training mode, press to stop •
recording log.
NOTE: In data page view, quick press twice
to stop recording log.
ENGLISH
Amis S430/S630 User’s Manual7
Accessories
10
18OC
09/06
MON
3
10
12:05
18OC
09/06
MON
AM
35
The Amis S430/S630 comes with the following accessories:
Speed & Cadence Dual Sensor
Heart Rate Monitor Set
Heart Rate Chest Strap
Bike Mount
Adaptors
NOTE: For more information about purchasing optional accessories, please go to Bryton
Eshop http://www.brytonsport.com/eshop or contact your Bryton dealer.
33
33
33
33
83 (Amis S630 R)
3 (Amis S430 H)3 (Amis S630 H, Amis S630 R)
3 (Amis S430 H)3 (Amis S630 H, Amis S630 R)
83 (Amis S630 R)
33
Initial Setup
Step 1: Charge the Battery
Warning:
This product contains a lithium-ion battery. See the Warranty and Safety Information guide
in the package for important battery safety information.
Charge the device for at least 4 hours before you start using it.
1. Attach the magnet charging clip onto the device.
2. Plug the other end of the magnet charging clip to a computer.
Amis S430/S630 User’s Manual
8
Step 2: Turn On the Device
Pls Reposition
Turn On/O
To turn on the device, press and hold •/.
In clock view, press and hold •/ to turn o the device.
Step 3: Initial Setup
When turning the device on for the rst time, the setup wizard appears on screen. Follow
the instructions to complete setup.
1. Select the display language.
2. Select the unit of measurement.
3. Enter your user prole (gender, date of birth, height, weight, maximum heart rate, lactate
threshold heart rate, race time).
NOTE: It is recommended to input the data since data accuracy will highly aect your
training analysis.
4. Scan the QR code with your phone to download the Bryton Mobile APP.
NOTE:
The Amis S430/S630 was designed to wirelessly sync your data in the background using •
Bluetooth Smart.
For more instructions, please refer to “Share Your Records” section. Bluetooth Smart and •
WiFi-enabled mobile phone is required. Android 4.3 or above.
5. Read and accept the Safety Agreement.
Press •p and q key to read the Safety Agreement.
Press •/ to accept the Safety Agreement.
Step 4: Acquire Satellite Signals
Once the Amis S430/S630 is turned on, it will automatically search for satellite signals. While
the device is searching for satellite signals, the screen may display:
Pls Reposition•
No GPS signal or GPS signal is weak. Under this environment,
it is very dicult to get GPS position x. This status usually
happens when you’re in urban area or close to buildings.
Please move to an open area to acquire better GPS reception.
ENGLISH
Amis S430/S630 User’s Manual
9
Searching•
Searching
Fixed
GPS should be able to acquire position in few minutes.
When ( ) appeared, it is recommend to move to an open
area until ( ) is displayed to acquire as many satellites as
possible.
Fixed•
GPS position is xed. The screen will automatically enter data
page.
NOTE:
For a more accurate measurement the rst time you use the device, please stay outdoor •
for at least 10 minutes with no obstructions overhead before performing a GPS search.
If you are unable to get the GPS reception after 5 minutes or more, try again at another •
location.
For more information on receiving GPS signals, refer to •Receiving GPS Signals section.
Download Bryton Update Tool
NOTE: Bryton Update Tool can notify you if a new software version or GPS data is available.
The newer GPS data can speed up the GPS acquisition. We highly recommend you to check
for updates every 1-2 weeks.
1. Go to http://www.brytonsport.com/help/start and download Bryton Update Tool.
2. Follow the on-screen instructions to install Bryton Update Tool.
Share Your Records
Share Your Tracks to Brytonsport.com
1. Sign up/log in on Brytonsport.com
a. Go to http://www.brytonsport.com/help/start.
b. Register a new account or use your current Bryton account to log in.
NOTE: Bryton account is the email address used to register as a member of
brytonsport.com.
Amis S430/S630 User’s Manual
10
2. Connect to PC
Pairing
Next
Bryton mobile app
INSTALLING...
Pairing
waiting for pairing
Turn on your Amis S430/S630 and connect it to your computer by using USB cable.
3. Share Your Records
a. Go to http://www.brytonsport.com/help/landing. Click “Upload Files” button. Then,
click “Select from Files”.
b. Choose to save as “History”. Then, click “Select and Upload les”.
c. Select FIT les from Bryton folder in the device.
Share Your Tracks via Bryton Sports APP
When using the device for the rst time, please download Bryton Mobile APP and pair your
mobile phone with Amis S430/S630.
NOTE:
You can also scan QR code here or go to •
corp.brytonsport.com/app/sports to download Bryton APP.
You need to install the Bryton APP to enable the notication feature.•
a. Go to Settings > General > Bluetooth >
Pairing.
c. Install the Bryton APP.
b. Use mobile phone to scan QR code to
download Bryton APP.
d. Press / and leave Amis device with
the “Waiting for pairing”.
ENGLISH
Amis S430/S630 User’s Manual11
e. Sign up/log in on Bryton APP
Pairing
waiting for pairing
Register a new account
or use your current
Bryton Account to log in.
NOTE: Bryton Account
is the email address
that you used to register
a member of
brytonsport.com.
f. Make sure Bluetooth on mobile phone and
Amis are turned on.
g. Pairing your mobile phone with Amis
Select Setting > Bluetooth > Pairing.
Once the Amis appears on the list, select it
to pair.
NOTE: The pairing process is required only
one time. Once completed, your Amis and
mobile phone will remain paired.
h. Later, tap Sync with device, the workout
records will sync to Bryton APP.
Amis S430/S630 User’s Manual
12
Fixed
1
GPS signal status
GPS positioning status
Status Page
Log recording
Bike Type(Amis S630 only)
Heart rate sensor indicator
Icon Description
GPS Signal StatusRunning mode
No SignalLog recording in progress
Poor *Recording is paused
Fair **Bluetooth function is enabled
Good **Alarm
GPS Positioning/Function StatusLock screen
No signal (not xed)Power Status
WeakFull battery
NormalHalf battery
Battery level
Cadence sensor indicator (Amis S630 only)
Good
Heart rate sensor activeBattery depleted
Cadence sensor active (Amis S630 only)Battery charging
Speed sensor active (Amis S630 only)
Combo sensor active (Amis S630 only)
Cycling mode (Amis S630 only)
Swimming mode (Amis S630 only)
NOTE:
Only the active icons are displayed on the screen.•
When the speed & cadence dual sensor is activated, the sensor icon will appear at the •
speed sensor icon position.
* Please go to an open area for better reception.
** When blinking, this indicates the device is still searching for the GPS signal.
Low battery
ENGLISH
Amis S430/S630 User’s Manual13
Receiving GPS Signals
Trip Time
Total Dist.
11
00:31:00
Cycling
k
m
k
m
Trip Time
Total Dist.
11
00:31:00
Cycling
k
m
Total Dist.
11
00:31:00
Cycling
Trip Time
Searching
Searching
Amis implements a status page to indicate current GPS signal strength. After position-x •
is done, you can still check GPS status at data page by inspecting the icon located at upright corner.
GPS signal is weak.
The satellite condition is
GPS signal is normal.
Adequate for normal use.
GPS signal is good.
only sucient for positionx. This situation may
not be sustained if your
sky-view changes, such as
going to the obstructed
environments.
The best way to allow GPS get your position is to wear the watch on your wrist, with the •
watch surface facing up. Please do not let the antenna facing down or cover it with hand.
Please avoid the obstructed environments since they might aect the GPS reception.•
TunnelsInside rooms,
building, or
underground
Under water High-voltage
wires or
television
Construction
sites and heavy
trac
towers
Amis S430/S630 User’s Manual
14
Display Screen
10
12:05
18OC
09/06
MON
AM
35
01:00
Current Time
Daylight Saving
08:24
Time
Set Time1
Off
Set Time2
Alarm
Set Alarm
AM 08:00
On
Switch
Clock View
Current weather &
temperature
Time 1
(local time)
Current date
Auto Time Calibration by GPS
1. Press / to enter the menu mode.
2. Press p/q to select Settings > Watch > Time > By GPS and
press / to enter its submenu.
3. Press p/q to set the daylight saving time and press / to
conrm.
NOTE: Please go outdoors to acquire GPS signal when you see
“Pls Reposition” on the screen.
Time 2
(alternate time)
Alarm icon
Lock Up and Down
key
Battery level
Bluetooth icon
Manually Set Time
1. Press / to enter the menu mode.
2. Press p/q to select Settings > Watch > Time > Manual >
Set Time 1 or Set Time 2 and press / to enter its submenu.
3. Press p/q to select the desired setting and press / to conrm.
Set Alarm (Time1)
1. Press / to enter the menu mode.
2. Press p/q to select Settings > Watch > Alarm > Set Alarm
and press / to enter its submenu.
3. Pressp/q to select the desired setting and press / to conrm.
NOTE: To enable the alarm, select Settings > Watch > Alarm > Switch > On.
NOTE:
To enable the Time 2, select •Settings > Watch > Time > Manual
> Set Time 2 > Switch > On.
To change the time format, select •Settings > Watch > Time >
Time Format.
ENGLISH
Amis S430/S630 User’s Manual15
Exercises
Run Time
Pace
00:40:00
Distance
/
K
m
05:506.73
K
m
Distance
15.0137:10
CAD
78
Speed
Trip Time
15.0
r
p
m
K
m
h
K
m
Exercise
Train & Test
View Histroy
11:14 AM16/04
ExercisesExercises
Running
Cycling
Triathlon
Multisport
Starting an Exercise
Amis S430
To start an exercise, press p/q to select Running. Then press /
to start.
Amis S630
To start an exercise, press p/q to select Exercises > Running, Cycling, Triathlon, Multisport, Outdoor Swim, or Others. Then
press / to start.
NOTE: In swimming mode, the Amis device auto-locks the sensor keys
(up and down keys) to prevent false contact by the water. In order to
view the data page(s), please wipe o excess water on the surface of
the watch and pause the recording before operating the sensor keys.
Press the power key to resume the recording while pausing. We highly
recommend to lock the sensor keys in humid environment.
Running/Cycling
Select Running/Cycling and press / to start exercise.
NOTE: Cycling option is only available on Amis S630.
NOTE: Displayed information varies on exercise mode and user preference. Refer to
Customize the Data Display section for more information.
Amis S430/S630 User’s Manual
16
Triathlon (Amis S630 only)
Trip Time
Total Dist.
500
00:30:00
Swimming
m
Trip Time
Total Dist.
11
00:31:00
Cycling
K
m
Trip Time
Total Dist.
11
00:31:00
Cycling
K
m
Trip Time
Total Dist.
6.73
00:40:00
Running
K
m
The exercise information will be displayed as following order: •Swimming > Cycling >
Running. Press / to switch to the second or third sport.
To add the transition time, refer to •Enable Triathlon Transition Time section.
NOTE: Displayed information varies on exercise mode and user preference. Refer to
Customize the Data Display section for more information.
Multisport (Amis S630 only)
During the Multisport exercise and the mode setting is set to •Manual, press p/q select
the desired sport (Running, Cycling, or Swimming) and press / to conrm. Then
press / to start exercise.
To switch to the second sport, press •/ to display the menu option. To preset the
sports sequence in Multisport mode, refer to Multisport Sequence Setup section.
NOTE: Displayed information varies on exercise mode and user preference. Refer to
Customize the Data Display section for more information.
Loading...
+ 38 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.