45
User's Manual
Table of Contents
Getting Started ................. 4
Your Rider 450 ............................. 4
Accessories ................................... 5
Status Icons .................................. 5
Step 1: Charge Your Rider 450 ... 5
Step 2: Turn On Rider 450 ........... 6
Step 3: Initial Setup ..................... 6
Step 4: Acquire Satellite
Signals ........................................... 6
Step 5: Ride Your Bike with
Rider 450 ...................................... 7
Reboot Rider 450 ........................ 7
Share Your Records .................... 8
Auto Sync Tracks to
Change System Settings ............ 26
Bluetooth .................................... 29
Cogure Auto Scroll .................. 30
Enable File Saving Mode .......... 30
Start Reminder ........................... 31
View Memory Usage .................. 31
Reset Data ................................. 32
View Firmware Version ............. 32
ANT+ / BLE Sensors .................... 33
Altitude ....................................... 35
Personalize User Prole ............ 36
Personalize Bike Prole ............. 37
Wireless Local Area
Network(WLAN) ......................... 39
Bryton Active App ........................ 9
Data Sync with
Bryton Active App ...................... 10
Bryton Update Tool ................... 12
Train & Test ..................... 13
Training Plan............................... 13
My Workout ................................ 14
Bryton Test.................................. 14
View History .................... 15
View Exercise/Training Record.. 15
Delete History ............................. 17
Follow Track .................... 18
Create Track ................................ 18
Bryton Active App
Advanced Settings ...........40
Grid Setting ............................... 40
Altitude Calibration ................... 41
Notications ............................... 42
Appendix ..........................43
Specications ............................ 43
Battery Information ................... 44
Install Rider 450 ........................ 46
Install Speed/Cadence/
Dual Sensor (Optional) .............. 47
Install Heart Rate Belt
(Optional) .................................. 48
View/Delete Track ...................... 19
Settings ............................ 20
Data Page ................................... 20
Smart Lap ................................... 22
Set Alert ...................................... 23
Smart Pause ............................... 23
Data Record ................................ 24
GPS System ................................. 25
Wheel Size and
Circumference ............................ 49
Basic Care For
Your Rider 450 ......................... 50
Data Fields .................................. 51
Table of Contents 2
WARNING
Always consult your physician before you
Safety Information guide in the package.
begin any training. Please read the details in Warranty and
Australian Consumer Law
Our goods come with guarantees that can not be excluded under the New Zealand and
Australian Consumer Laws. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
Video Tutorial
For a step-by-step demonstration of device and Bryton Active App, please scan QR code below to
check Bryton Video Tutorials.
https://www.youtube.com/playlist?list=PLQuQd-qebKIJhMATlefVMdecblWZtGmXf
Getting Started
This section will guide you through the basic preparations before you start using your Rider 450 .
Rider 450 is equipped with barometer which shows the real time altitude.
NOTE: To adjust the altitude settings on Rider 450 , refer to page 29 .
F
E
Your Rider 450
A
B
OK/LAP ( )
A
• In Menu, press to enter submenu
or conrm a selection.
• In Cycling mode, press to start
recording.
• When recording, press to mark
the lap.
B
BACK ( )
• In Cycling mode, press to enter Menu page.
• In Menu, press to return to the previous
page or cancel an operation.
• When recording, press to pause recording.
• Press again to stop recording while
paused.
C
POWER ( )
•
Press to turn the device on.
•
Long Press to turn the device o.
Press to turn on/o the backlight while the
•
device is on.
BACKLIGHT ( )
45
D C
PAGE ( )
D
•
In Cycling mode, press to switch meter screen
pages.
E
DOWN ( )
In Menu, press to scroll down the menu
•
options.
In Follow Track mode, press to zoom out
•
on the device map.
In Meter view, long press to enter into
•
Shortcut Menu.
F
UP ( )
In Menu, press to scroll up the menu options.
•
In Follow Track mode, press to zoom in on
•
the device map.
Getting Started 4
Accessories
The Rider 450 comes with the following accessories:
• Bike mount•
USB cable
Optional items:
•
Smart Heart rate Sensor Smart Speed Sensor
•
Smart Cadence Sensor Smart Speed/Cadence Dual Sensor
•
Race Mount Sport Mount
•
•
•
Status Icons
Icon Description Icon Description
Bike Type
1
2
Bike 1
Bike 2
GPS Signal Status
Heart Rate Sensor is active
Cadence Sensor is active
Speed Sensor is active
Dual Sensor is active
ENGLIH
Weak signal
Strong signal
Power Status
Full battery
/
NOTE: Only the active icons are displayed on the screen.
Half battery
Low battery
/
Power Meter is active
Log Record in progress
R
ecording is paused
Current speed is faster/slower
than average speed.
Getting Started 5
Step 1: Charge your Rider 450
Connect Rider 450 to a PC to charge the battery for at least 4 hours.
Unplug the device when it is fully charged.
• You may see a white screen when the battery is really low. Keep the device plugged for
several minutes, it will automatically turn-on after battery is properly charged.
o
• The temperature suitable for charging battery is 0
charging will be terminated and the device will draw power from battery.
C ~ 40oC. Beyond this temperature range,
Step 2: Turn On Rider 450
Press to turn on the device.
Step 3: Initial Setup
When turning Rider 450 on for the rst time, you will need to follow on screen instructions to
complete setup.
1. Select the display language.
2. Select the unit of measurement.
NOTE: Only when you choose English for the display language, you will need to select the
unit of measurement. Otherwise, default would be metric unit.
Getting Started 6
Step 4: Acquire Satellite Signals
Once the Rider 450 is turned on, it will automatically search for satellite signals. It may take
30 to 60 seconds to acquire signals. Please make sure you acquire the satellite signal for the
The GPS signal icon (
Tunnels Inside rooms,
NOTE:
To improve the GPS accuracy, you can set 1 sec mode as your recording
frequency ( page 24 ) and update GPS regularly by using Bryton Update Tool
( page 12 ) to update GPS data.
/
building, or
underground
icon appears on the screen.
Under water High-voltage
wires or
television
towers
Construction
sites and heavy
Step 5: Ride Your Bike with Rider 450
Free ride:•
In meter view, measurement starts and stops automatically in sync with the movement
of the bicycle.
Start an exercise and record your data:•
In meter view, press
NOTE:
If you continue to proceed without pressing to record, Rider 450 would pop
up a reminder to ask you to record when motion of bike is detected. To set the
frequency of start reminder, please go to page 31.
to start recording, press to pause, press again to stop.
Reboot Rider 450
To reboot the Rider 450 , press four keys (
/
/ ) at the same time.
/
Getting Started 7
Share Your RecordsShare Your Records
Upload Your Tracks to Brytonactive.com
1. Sign up/log in Brytonactive.com
a.
Go to https://active.brytonsport.com.
b. Register a new account or use your current account to log in.
2. Connect to PC
Turn on your Rider 450 and connect it to your computer by USB cable.
3. Share Your Records
a. Click “+” on the upper right corner.
c. Click “Activities” to check uploaded tracks.
Share Your Tracks to Strava.com
1. Sign up/log in on Strava.com
a. Go to https://www.strava.com
b. Register a new account or use your current Strava account to log in.
2. Connect to PC
Turn on your Rider 450 and connect it to your computer by USB cable.
3. Share Your Records
a. Click “+” on the top right corner of Strava page and then click “File”.
c. Enter information about your activities and then click “Save & View”.
Getting Started 8
Auto Sync Tracks to Bryton Active App
No more uploading tracks manually after riding. Bryton Active App automatically
syncs your track after pairing with your GPS device.
a. Scan QR code below to download Bryton
Active App or go to Google Play/App Store
b. Go to Settings>Device Manager>+>
Aero 60 to add your GPS device.
to search Bryton Active App. Then, log in or
create an account.
http://download.brytonsport.com/inst.html
c. Check if UUID shown on app is the
same as your device. Add “Yes” to
conrm adding. If it is wrong UUID,
press NO to add it again.
d. Successfully added ! Turn on Auto
Now, new tracks will be automatically
uploaded to Bryton Active App.
Note: Each device has its own unique UUID.
You can nd it on the back of the device.
NOTE: Bryton Active App syncs with Brytonactive.com. If you already have brytonactive.com
account, please use the same account to log in to Bryton Active App and vice versa.
Getting Started 9
Data Sync with Bryton Active App
With access to the intenet, your Aero computer automatically updates GPS data, uploads
recorded tracks and checks for available rmware update. To sync data correctly from/to your
device, it is required to add your device to your Bryton Active App before syncing data for the
rst time.
Connect To A Network
It is required to set up a connection to a network before syncing data. You can also set a network
on Bryton Active App.
Connect
Bryton
My Hotspot
Sweet Home
Note: If an “AP/Password Incorrect” message pops up, it means your saved network is not
available or your password of saved network has been changed. Please go to page 39 :
Wireless Local Area Network (WLAN) to learn how to set up a new network connection.
1. In Main menu, press to select Data Sync
and press .
2. Press
or hotspot and press .
Press to enter password and choose
3.
4. A “Connected. Please press any button to exit.”
message pops up. Press any button to start
syncing data.
/ to choose one available network
/
password.
Getting Started 10
Data Sync
To perform Data Sync, please make sure your device is successfully added to your Bryton Active
App account and connected to a wireless network; then, just let your device smartly guide you
through the syncing process.
First of all, the device will start to update GPS data in your device. Then, if you have planned trips or
workouts in Bryton Active App, Then, it will upload your tracks to Bryton Active App. Last, if there is
a new rmware update, it will pops up a message to ask your permission to update rmware.
Select YES to update it. After completing data sync, you will see a summary of the syncing data.
GPS update
Upload tracks
3 of 6
Firmware update Summary
1 of 1
Firmware update
available.
Download?
Yes
GPS update
trips
tracks
Firmware update
5/5
6/6
1/1
Note:
•
Firmware updates usually take longer to download and install, select NO
if you prefer to update it on your next sync.
v
v
v
v
Getting Started 11
View History
You can veiw exercise record on your device right after your ride, and delete any unwanted
record to gain more storage.
View Exercise/Training Record
Rider 450 provides graphical track summary, detail workout data , lap data and graphical analysis for you to have a better idea of your workout performance.
Summary
To view workout summary:
1. In the main screen, press to select
NOTE: edir ruoy lla fo kcart peek ot o brytonactive.comt yrotsih ruoy daolpu osla nac uoY
data.
Detail
Time
Trip Time
Ride TIme
Distance
Distance
Speed
AvgSpd
MaxSpd
Altitude
Alt. Gain
Alt. Loss
Detail
04:50:38
04:12:26
78 km
18.9 km/h
38 km/h
2201 m
400 m
View History > View and press
2.
Press to select an activity history from
.
the list and press to enter.
3. Select Summary and press to view
workout summary.
To view detail workout:
1. In the main screen, press to select
View History > View and press
2.
Press to select an activity history from
.
the list and press to enter.
3. Select Detail
and press to view
detail workout.
View History 15
Lap
Lap
km km/h
1 10.0
10.0
2
10.0
3
10.0
4
10.0
5
10.0
6
7
10.0
8
08.0
Speed
16.4
15.7
14.9
15.4
15.2
14.9
15.3
29.0
TimeDist.Lap
36:25
38:10
40:05
38:43
39:17
40:15
39:05
20:38
Analysis
To view graphical analysis.
1. In the main screen, press
2.
Press to select an activity history from
to select View History > View and press
To view lap data:
1. In the main screen, press to select
View History > View and press
.
2.
Press to select an activity history from
the list and press to enter.
3. Select Lap and press to view lap data.
.
the list and press to enter.
3. Select
Analysis and press to start viewing graphical analysis.
4. Press to view analysis of Altitude, Speed, Heart Rate, Cadence and Power.
133
Altitude
150
100
21.7
Cadence
45
30
15
0
Speed
180
120
60
0
21.7
Power
540
360
Heart Rate
21.7
50
0
21.7
180
0
21.7
View History 16
Delete History
To delete your history:
View
2016/06/06 14:28
22.8km
Do you
2016/06/06 14:54
20.2km
want to
delete ?
2016/06/06 14556
15.6km
2016/05/28 15:30
10.2km
Yes
0345:04
0345:35
0344:51
00:32:45
1. In the main screen, press
to select
View History > Delete and press
2. Press to select an activity history from
the list and press to delete the
selected history.
3. A “ Do you want to delete?
on the screen. To delete the data,
” message appears
press /
to select Yes and press
.
View History 17
Follow Track
Rider 450 provides 3 ways for you to create tracks: 1. Plan trips via Bryton Active App. 2. Use
previous rides from History. 3. Download .gpx tracks online. With turn by turn guidance
Note: Turn by turn gudiance function only supports trips planned by Bryton Active App.
Create Track
Plan Trips via Bryton Active App
1. On Bryton Active App, tap Plan Trip to enter. To plan trip,
simply put pins on desired locations by tapping
on the map or tap and enter locations in the
slide menu.
2.
Tap “ ” and edit the name of your trips.
3.
Tap Upload to upload planned trips to server.
4.
Tap < to be back to Course menu. Enter your planned
trip and tap to download the planned trips to the
device.
.
Note:
Please refer to page 9-11 to learn how to download planned trips via Data Sync.
From Device History
View
Summary
Detail
Lap
Analysis
Create track
1. In the Main Menu, select View History > View
and press to select the desired tracks and
press to confrim selection.
2. Press to select Create track.
3. Enter a name of the track and select “ ” and
press to save it.
4. Press to be back to the Main Menu.
5. In Main Menu, select Follow Track
and select the saved track and press
to start following the track.
> View
Follow Track 18
From 3rd Party Websites
Note:
View/Delete Track
1.
2. Use USB cable to connect the device to your
3.
4. Remove USB cable.
5.
computer.
them to the ExtraFiles folder of the device.
In the device Main Menu, select Follow Track
> View and select the planned trip and press
to start following the track.
You can veiw and delete your tracks.
Follow Track
View
Delete
Delete All
Delete
Al to New Orleans
Great River
Do you want
to delete?
Glacier
Yes
Yellowstone
View Tracks:
1. In Main Menu, press to select
Follow
2. Press to select the track and press
to view the track.
Delete Your Tracks:
1. In the Main Menu, press to select Follow
2. Press to choose the track and press .
3.
A message “Do you want to delete?” pops up.
Press / to select Yes and press .
Track>View
Track >Delete and press .
and press .
Follow Track 19
Settings
In Settings, you can customize Exercises settings, GPS system, General settings, Sensor settings,
Altitude, Bike and User prole. You can also customize most used device settings via Bryton Active App.
Settings
Exercises
GPS System
General
Sensors
1. In the main screen, press to select Settings.
2. Press to enter the Settings menu.
Data Page
You can set the display settings for the Meter and Lap or you can customize data page via
Bryton Active App. Please refer to page 40 to learn how to do it.
Meter Display
Data Page
Ride Time
Time
Time
Speed
3-grid display
1. In the Settings menu, press to enter Exercises and press again to enter Data Page.
2. Press to enter Data Page and change Auto to Manual and press to conrm selection.
Distance
Sunset
Item selection
3. Press to select Data Page and press to enter.
4. Press / to select Data Page 1, Data Page 2, Data Page 3, Data Page 4 or Data Page 5 and press
to enter the selected page.
5. Press / to select the number of Data Fields you need and press to conrm.
6. Press / to select the data you would like to make change and press to conrm.
7. Press / to select the desired Category and press to conrm.
8. Press / to select the desired data and press to conrm.
9. Press to exit this menu.
Settings 20
Loading...