User's Manual
Table of Contents
Getting Started ................ 4
Rider 10 Key Functions .............. 4
Reset Rider 10 ............................. 4
Accessories .................................. 5
Status Icons ................................. 5
Step 1: Charge your Rider 10 ... 6
Step 2: Turn On Rider 10 ........... 6
Step 3: Initial Setup ..................... 6
Step 4: Acquire Satellite
Signals .......................................... 7
Step 5: Ride Your Bike with
Rider 10 ...................................... 7
Share Your Records ..................... 7
Sync to Bryton Mobile App ........ 8
Notications..................... 17
Appendix .......................... 18
Specications ............................... 18
Battery Information .................... 19
Install Rider 10 .............................. 21
Install the Speed/Cadence/
Dual Sensor (Optional) ............... 22
Install Heart Rate Belt
(Optional) ..................................... 23
Wheel Size and
Circumference ............................ 24
Basic Care For Your Rider 10...... 25
Data Fields .................................. 26
Download Bryton Update Tool .. 10
Settings............................. 11
Unit .............................................. 11
Hour ............................................. 11
Calibrate Altitude ........................ 12
Activate Bike ................................ 12
Enable GPS ................................... 13
Sensor Pairing ............................. 13
Delete Records ............................. 14
Adjust Odometer ......................... 14
Bryton App Advanced
Settings............................. 15
Gride Setting ................................ 15
Altitude Calibration ..................... 16
2 Table of Contents
WARNING
Always consult your physician before you
Safety Information guide in the package.
Australian Consumer Law
Our goods come with guarantees that can not be excluded under the New Zealand and
Australian Consumer Laws. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
Video Tutorial
For a step-by-step demonstration of device and Bryton Mobile App, please scan below QR code to
check Bryton Video Tutorials.
begin any training. Please read the details in Warranty and
https://www.youtube.com/playlist?list=PLQuQd-qebKIJhMATlefVMdecblWZtGmXf
3 Getting Started
Getting Started
This section will guide you on the basic preparations before you start using your Rider 10.
Rider 10 Key Functions
2
1
Power/OK ( / )
•
Press to turn the device on.
•
In free cycling, press to start recording.•
• When recording, press to stop recording.
2
MENU( )
1
3
3
Backlight/Page ( / )
•
In Menu, press to move down to scroll
•
through menu options.
•
In Meter mode, press to switch meter
screen page.
Press to enter/exit menu mode.•
Press to be back to main menu.•
Long press to clear notication icons.•
Reset Rider 10
To reboot the Rider 10, long press two keys ( ) at the same time.
/
4 Getting Started
Accessories
1
2
The Rider 10 comes with the following accessories:
USB cable• Bike mount•
Optional items:
Smart Heart Rate Monitor• Smart Speed Sensor•
•
Status Icons
Smart Cadence Sensor•
• F-Mount
Icon Description
Bike Type Settings
Bike 1
Bike 2
GPS Signal Status
No GPS Signal
Weak GPS signal
Strong GPS signal
Power Status
Full battery
/
Half battery
Icon Description
Daylight Saving
Backlight
Afternoon
Select 12h or 24h
Data Field
Gradient
Altitude Gain
Altitude Loss
Ride Time
Icon Description
Sensor Pairing
Heart Rate Sensor
Paired
Speed Sensor Paired
Cadence Sensor
Paired
Recording
Bluetooth
Connected
L
ow battery
Notication
Incoming Call
E-mail
Message
NOTE:
• Only the active icons are displayed on the screen.
• Device battery icon ( ) starts blinking indicating that the battery is low.
• Sensor icons( , , ) start blinking indicating that paired sensors are not within
connection range.
Trip Time
Cadence Value
Heart Rate Value
Odometer
Distance
Distance 1
Distance 2
Maximum
Average
5 Getting Started
Step 1: Charge your Rider 10
Connect Rider 10 to a PC to charge the battery for at least 4 hours.
Unplug the device when it is fully charged.
• You may see battery icon is blinking when the battery is really low. Keep the device plugged until
it is properly charged.
o
• The temperature suitable for charging battery is 0
charging will be terminated and the device will draw power from battery.
C ~ 40oC. Beyond this temperature range,
PC
At least 4 Hours
Step 2: Turn On Rider 10
Press to turn on the device.
Step 3: Initial Setup
When turning Rider 10
instructions to complete setup.
1. Press to select the unit of measurement.
the
6 Getting Started
Step 4: Acquire Satellite Signals
Once the Rider 10 is turned on, it will automatically search for satellite signals. It may take
30 to 60 seconds to acquire signals. Please make sure it acquires the satellite signal for the
The GPS signal icon (
• icon appears on the screen.
•
Tunnels Inside rooms,
/
building, or
underground
Under water High-voltage
wires or
television
towers
Construction
sites and heavy
Step 5: Ride Your Bike with Rider 10
Free ride:•
In meter view, measurement starts and stops automatically in sync with the movement
of the bicycle.
Start an exercise and record your data:•
In meter view, press to start recording, press
again to stop.
Step 6: Share Your Records
Share Your Tracks to Brytonactive.com
1. Sign up Brytonactive.com
a.
Go to https://active.brytonsport.com.
b. Register a new account.
2. Connect to PC
Turn on your Rider 10 and connect it to your computer by USB cable.
3. Share Your Records
a. Click “+” on the right upper corner.
c. Click “Activities” to check uploaded tracks.
7 Getting Started
Share Your Tracks to Strava.com
1. Sign up/log in on Strava.com
a. Go to https://www.strava.com
b. Register a new account or use your current Strava account to log in.
2. Connect to PC
Turn on your Rider 10 and connect it to your computer by USB cable.
3. Share Your Records
a. Click “+” on the top right corner of Strava page and then click “File”.
c. Enter information about your activities and then click “Save & View”.
Sync Data to Bryton Mobile App
Launch Bryton Mobile App
1. Download Bryton Mobile App
Scan below QR Code to download Bryton App or you can go to Google Play for android/App Store
for iOS to search Bryton App and download it.
http://download.brytonsport.com/inst.html
2. Sign up Bryton Mobile App
a. Launch Bryton Mobile App.
b. Register a new account.
NOTE: Bryton Mobile App syncs with Brytonactive.com. If you already have brytonactive.com
account, please use the same account to log in to Bryton Mobile App and vice versa.
8 Getting Started
Loading...