Bryan Boilers BKS4000, BKS8000, BKS6000, BKS2000 User Manual

TM

BRYAN STEAM

Boiler Feedwater Softener Systems

...with the features that
assure operating efficiency
and reliable performance

• Twin tank system provides an unlimited
supply of clean, soft water that is also used
to make brine for regenerations. Soft water
regenerations clean resin more efficiently,
using less water than regenerations with
raw water.

• Non-Electric Kinetico® Control valve elimi­nates the need to adjust, set, repair or
replace timers or computers.

Form No. 8300

(10/02)

The Bryan boiler feedwater softener uses the Kinetico
non-electric control valve for efficient, low cost opera­tion. The patented control valve is hydraulically driven
and eliminates the need for electric power or compo­nents. Water pressure runs the system. As water passes
through, a metering device counts the number of gallons
of water that have been processed. The valve initiates
regeneration after the predetermined amount of water has
been treated.

The system comes standard with two media tanks.
When one tank is exhausted, the other comes on-line to
ensure an uninterrupted supply of conditioned water. The
exhausted tank regenerates while off-line to provide an
unlimited supply of clean, soft water. This configuration
uses soft water for the complete regeneration process to
substantially improve system efficiency and the product
water quality.

® Kinetico is a registered trademark of Kinetico Incorporated.

• Countercurrent Regeneration improves
water quality by cleaning the system more
effectively and efficiently.

• High quality resin maintains long life and
high capacity to assure quality water.
Utilizes standard manufactured softener
salt.

• Corrosion-resistant valve and tanks with­stand the harshest environments.

• Modular design allows your system to grow
as your water demand increases. Standard
models supply from six to 180 gallons (22
to 680 liters) of soft water per minute.

®

Exclusive
Non-Electric
Control Valve

The patented Kinetico
Control Valve is hydraulically
driven and eliminates the
need to adjust, set, repair or
replace timers, computers or
electrical components.

®

Bryan Feedwater Softener Systems

FEED WATER SOFTENER SPECIFICATIONS

Maximum Hardness (GPG) 30

Media Tank Size — D x H 13" x 54" (33 x 137 cm)

Brine Drum Size — D x H 24" x 40" (61 x 102 cm)

Resin Per Tank 2.25 cu ft. (63.72 liters)

Salt Used per Cycle 15 lbs. (7 kg)

Regeneration Time 90 minutes

Gravel Underbed/Tank 35 lbs. (16 kg)

BKS2000 Series

BKS4000 Series

BKS6000 Series BKS8000 Series

MODULAR SERIES CAPACITIES, DIMENSIONS AND WEIGHTS

Model Number BKS2000 BKS4000 BKS6000 BKS8000

System Capacity 58,750 grains 117,500 grains 176,250 grains 235,000 grains

Unit Flow Rate*

18/25 gpm 36/50 gpm 54/75 gpm 72/100 gpm

(68/94 lpm) (136/189 lpm) (204/284 lpm) (272/378 lpm)

Total Dimensions, W x D x H inches 27 x 13 x 60 27 x 46 x 60 27 x 69 x 60 27 x 92 x 60

Total Dimensions, W x D x H (cm) (69 x 97 x 153) (69 x 117 x 153) (69 x 76 x 153) (69 x 234 x 153)

Quantity of Media Tanks 2 4 6 8

Number of Tanks On-Line 1 2 3 4

Quantity of Brine Tanks 1 2 3 4

Total Brine Tank Capacity, lbs (kg) 450 (204) 900 (408) 1350 (613) 1800 (817)

Operating Weight, lbs (kg) 370 (168) 740 (336) 1110 (504) 1480 (672)

*Service flow rate is rated at a 15/25 psig (103/172 kpa) pressure drop. Dimensions and specifications are subject to change without notice. Consult factory for certified dimensions.

Bryan Steam LLC — Leaders Since 1916

783 N. Chili Ave., Peru, Indiana 46970 U.S.A.
Phone: [phone] • Internet: www.bryanboilers.com

•

Fax: [phone]

Form No. 8300 ©2002 Bryan Steam LLC Printed in USA

E-mail: [e-mail]

102-4653