Brother WD-360B Quick Guide
English
WD-360B
Quick Setup Guide
Printed in Japan
D00VM8001
Names and functions of key components
b
a
f
e
d
c
Head Display
Before using the AiRScouter, make sure you read the Product Safety
Guide first. Then read this Quick Setup Guide for correct setup and use
of the AiRScouter, and keep it for future reference.
Note that product options and accessories may vary depending on the
country of sale.
Product Safety Guide (included in the box)
This guide provides important safety information for the AiRScouter.
Read it carefully before use.
Quick Setup Guide (this guide)
This guide provides basic information about setting up and using the
AiRScouter, as well as detailed tips for troubleshooting problems that
may occur.
User's Guide (available online at Brother Solutions Center)
This guide provides additional information on settings,
operation, troubleshooting, and maintenance. Visit
the Brother Solutions Center at support.brother.com
select Manuals, and search for your product.
,
Unpack the machine and check
the components
Before using the AiRScouter, make sure that you have all the
components shown below.
Head Display Unit Control Box AC Adapter
a
b
c
a Focus Adjustment Dial
Adjusts the focus of the image on the head display by changing
the focal length of the optics (from 30 cm to infinity).
b Head Display Cable
Connects the head display to the control box and transmits power
and video signals to the head display.
c Eyecup
When attached, prevents the head display from touching the
user’s eye.
Harness
a Head Band
Attaches the AiRScouter to the user’s head and distributes the
weight of the unit.
b Forehead Pad
Cushions the head band and prevents it from slipping down the
user’s forehead.
c Cable Channel
Holds the head display cable in place along the head band.
d Rear Band Attachment Post
Allows the user to attach the rear band and tighten the head band
around the head to prevent slippage.
e Flexible Arm
Allows the user to adjust the position and angle of the head display
relative to the eye.
f Joint Dial
Loosens the ball joint to allow for adjustment of the flexible arm,
or tightens it to fix the flexible arm's position and angle.
Case
*1
*2
Rear Band
Product Safety Guide
Belt Pouch
Li-ion (Lithium Ion)
Rechargeable Battery
Flexible Arm
(For Right Eye)
*1 The cable clip may be used to attach the head display cable to your
clothing to keep it out of your way. Loop the string of the cable clip around
the head display cable as shown.
*2 The case is used for storage only. If the product falls or receives a strong
impact while in the case, it may become damaged.
Cable Clip
Quick Setup Guide
(This Guide)
Control Box
a
b
c
d
e
a Control Panel
Includes control buttons, status LEDs, and a battery level indicator.
b AC Adapter Port
Allows the user to connect the included AC adapter to power the
control box, or to recharge the internal battery.
c HDMI™ Input Port
Allows you to connect HDMI-compatible devices.
d Head Display Cable Port
Allows the user to connect the head display to the control box.
e Micro-USB B Port
Allows the user to connect a third-party USB battery to power the
control box (note that this port cannot be used to charge the
internal battery).
LED Indications
lit flashing off
a Display LED (Green)
State Name Explanation
Display ON
(Slowly)
(Quickly)
Operating
No input
Power OFF
b Key Lock LED (Orange)
State Name Explanation
Key lock ON
Key lock OFF
The AiRScouter is receiving
a compatible video signal from
an external device.
The control box is processing the
video signal.
The AiRScouter is not receiving
a compatible video signal from an
external device.
The AiRScouter is powered off.
To power it on, press the power
button.
Button operation on the control box
is disabled.
Button operation on the control box
is enabled.
Control Panel Buttons
a b c d
a Power Button
Press this button to power on the AiRScouter, and press and hold
this button for two seconds to power off the AiRScouter (note that
the AiRScouter will automatically power off if there is no input from
a video source).
b Mode Button
Press this button to select the zoom mode.
c Image Rotation Button
Press this button to rotate the image by 180°.
d Brightness Button
Press this button to select the next brightness level; note that the
AiRScouter has five levels of brightness.
Control Panel Status LEDs
a
a Display LED (Green)
Lights up when the AiRScouter is on and an image is being
projected onto the display.
b Key Lock LED (Orange)
Lights up when button operation on the control box is disabled.
c Internal Battery LED (Orange)
Lights up when the control box is being powered by the internal
battery.
d External Power LED (Orange)
Lights up when the control box is being powered by the AC adapter
or by an external battery (for example, a third-party USB battery).
c Internal Battery LED (Orange)
State Name Explanation
(Slowly)
(Quickly)
Battery level
high
Battery level
medium
Battery level
low
No battery
The internal battery is fully charged.
The internal battery is half charged.
The internal battery is almost
completely discharged.
The internal battery is fully
discharged.
d External Power LED (Orange)
When the AC adapter is connected:
State Name Explanation
Working
(Slowly)
(Quickly)
cd
b
d External Power LED (Orange)
When an external battery is connected:
State Name Explanation
(Quickly)
Charging
Charging
error
Full charge The internal battery is fully charged.
Working
Connection
error
No battery
The AiRScouter is being powered by
the AC adapter.
The internal battery is being charged
by the AC adapter.
An error occurred while the internal
battery was charging.
The AiRScouter is being powered by
an external battery.
An error occurred while an external
battery was supplying power.
The external battery’s capacity is
low. If the internal battery is charged,
the AiRScouter will switch to using it
for power (see
LED).
c Internal battery
Before using the AiRScouter
Note
Note
How to assemble the AiRScouter
Ensure the AiRScouter is powered and connected correctly according to
the following procedure:
1. Insert the internal battery into the control box:
a) Remove the screw
from the back of the
control box and slide
open the cover
panel.
b) Insert the Li-ion
rechargeable
battery.
c) Replace the cover
panel and tighten the
screw on the back of
the control box.
2. Connect the AC adapter to the AC adapter port on the control box, and
fully charge the internal battery.
3. Open the belt pouch and slide the control box into it as shown, so that
the ports are still accessible when the flap is closed.
• If an input source with an unsupported resolution is connected, the
image may not display correctly on the head display screen. If this
occurs, check the output resolution of the video source.
• Degradation of the video signal may occur when longer input cables
are used. For maximum quality, it's recommended to use HDMI and
USB cables of 2 m length or shorter.
How to wear the AiRScouter
1. Place the head band onto the head as shown. The band should be
positioned just above the forehead.
If the head band feels loose or starts to slip down the forehead, it is
recommended that you attach the rear band and use it to tighten the fit
on your head.
If you wear glasses
4. Pass your belt through the belt loop on the rear of the belt pouch.
5. Attach the control box firmly to your body as shown below.
6. Connect the head display cable from the head display to the head
display cable port on the control box.
7. Connect the video input cable to the control box.
2. To secure the head display cable to your clothing, use the cable clip.
Adjusting the display
Turn the power on
Press the power button
to turn the AiRScouter
on. (The LED under
the power button will
turn green.)
Adjust the position of the Head Display
1. Loosen the ball joints by turning the
dials on either end of the flexible arm
counter-clockwise.
2. Adjust the position and angle of the
head display so that it is easy to view.
3. Tighten the ball joints by turning the
dials on either end of the flexible arm
clockwise to fix the head display in
place.
Loading...