Brother PTH110TA1 User Manual
ELECTRONIC LABELING SYSTEM
English
User’s Guide
H11
0
ELECTRONIC LABELING SYSTEM
GETTING STARTED
Power Supply and Tape Cassette
Open the cassette cover by pressing the above
indicated area at the top end of the label maker.
• Make sure you turn off the power when replacing
batteries or tape cassettes.
Insert a tape cassette, making sure it snaps
into place.
• Make sure the end of the tape feeds under the tape guides.
• Use Genuine Brother P-touch TZe tapes with this label maker.
1
Print head
Tape cutter leverCassette cover
1
Tape exit slot
Toothed Wheel
Cutter's edge
End of tape
Tape guides
2
With your new Brother P-touch label maker, you can create a wide variety of custom, self-adhesive labels. This label
maker uses Brother "TZe" tapes from 0.13" (3.5mm) to 0.47" (12mm) widths. "TZe" tape cassettes are available in
many colors and sizes. Visit
www.brother.com
for a complete list of tapes that work with your machine.
Read this manual carefully before starting and keep it in a handy place for future reference.
Printed in China
LAJ575001
English
User’s Guide
H11
0
NOTE
When using optional AC adapter (AD-24ESA)
1. Insert the plug on the adapter cord into the AC adapter jack on the bottom end of the label maker.
2. Insert the plug into the nearest standard electrical outlet.
For memory backup, use either AAA alkaline batteries (LR03) or Ni-MH batteries (HR03) together
when using the AC adapter.
Insert six new AAA alkaline batteries (LR03) or
fully charged Ni-MH batteries (HR03), making
sure their poles point in the correct directions.
Users of alkaline batteries:
Always replace all six batteries at the same
time with brand new ones.
Users of Ni-MH batteries:
Always replace all six batteries at the same
time with fully charged ones.
1 Insert the two hooks at the bottom of the
cassette cover into the slots on the label
maker.
2 Securely close the cassette cover
making sure it snaps into place.
3
AC adapter jack
4
NOTE
• The LCD displays one row of 15 characters; however, the text you enter can be up to 80 characters in
length.
LCD
1. Size
2. Font
3. Cursor
4. Shift
5. Caps
6. Underline/Frame
7. Style
8. Label Length
If a specific label length has
been selected, also appears.
9. Cable
• Label length displayed on LCD may differ slightly from the actual label length when printed.
1
2
3
8
6
7
5
4
9
1 Turn on your label maker.
Supply power using six AAA batteries or the optional AC adapter (AD-24ESA), and then press
to turn the power on.
2 Set the language.
The default setting is [English].
3 Set the unit of measurement.
The default setting is [inch].
NOTE
• The label maker automatically turns off if no keys are pressed within five minutes.
• To cancel any operation, press .
• After pressing , "Accepted" is displayed for approximately one second.
Initial Settings
/ [Language] / [English/Español/Français/Hrvatski/Italiano/
Magyar/Melayu/Nederlands/Norsk/Polski/Português/Portug. (BR)/Română/Slovenski/Slovenský/
Suomi/Svenska/Türkçe/ýeština/Dansk/Deutsch] .
/ [Unit] / [inch/mm] .
NOTE
• While selecting the settings, press the Space key to revert to the default item.
Keyboard
1. Menu key
2. Power key
3.
Cursor key : Left (Use with Shift
key to go to top of the text.)
4. Escape key
5. OK key
6. Size key
7. Font key
8. Character key
9. Shift key
10. Caps key
11. Accent key
12. Tape cutter lever
13. Clear key
14. Print key
15. Preview key
16.
Cursor key : Right (Use with
Shift key to go to end of the text.)
17. Style key
18. Frame key
19. Cable key
20. Backspace key
21. Enter key
22. Symbol key
23. Space key
• Pressing the Preview key displays a generated image of the label, and may differ from the actual label
when printed.
1
2
3
4
7
5
6
9
8
10
11
21
13
12
14
16
17
18
19
22
23
15
20
GETTING STARTED (Continued)
This function allows you to set the brightness of
the LCD. You can select from five levels of
brightness.
The default setting is [0].
• To change back to default setting, press the
Space key.
• After pressing , "Accepted"
is
displayed for
approximately one second.
BASIC USAGE
X Switching Upper Case/Lower Case
Press to switch between upper and lower
case text.
Upper case ( ON) Lower case ( OFF)
X Creating Two-Line Labels
Move the cursor to where you want to start the next
line and press . Use either 0.35" (9mm) or 0.47"
(12mm) wide tape for two line printing.
NOTE
• The return symbol ( ) is displayed when you
press the Enter key, indicating you have chosen to
input a second line of text.
X Entering Accented Characters
Press to add an accented character.
• See the table of accented characters included in
this insertion sheet.
• To cancel operations, press .
• The order of accented characters differs by the
selected LCD language.
Contrast
/ [LCD contrast]
/ [-2/-1/0/+1/+2]
1
Entering Text
Line 1 Label image
Line 2
- /
2
Caps
Caps
Loading...