Brother NC-9100H User Manual

Network (LAN) board

When you add the optional Network (LAN) Board (NC-9100h), you
can connect your MFC into the network to use the Internet FAX,
Network Scanner, Network Printer and Network Management
operations.

WARNING

DO NOT touch the surface of the main board within 15 minutes after
turning off the power.

For more details about how to configure the Network board, please
see the NC-9100h Network User's Guide on the CD-ROM supplied
with the MFC.

NC-9100h
Print/Fax Server

1

Before starting installation

Be careful when handling the NC-9100h. There are many delicate
electronic components that are susceptible to damage from static
electricity. To avoid such damage, use the following precautions
when handling the board.

■ Leave the NC-9100h in its anti-static bag until you are ready to
install it.

■ Make sure that you are adequately grounded before touching the
NC-9100h. Use an anti-static wrist strap and a grounding mat if
possible. If you do not have an anti-static wrist strap, touch the
bare metal surface on the back of the machine before handling
the NC-9100h.

■ Avoid moving around the work area in order to eliminate static
charge build-up.

■ If possible, do not work on a carpeted area.

■ Do not flex the board and do not touch the components on the

card.

Tools Required:

Phillips Screwdriver

2