How it Works
Brother
Loading...
MFC-J1300DW
Setup Guide
2 pgs3.46 Mb0
Setup Guide
2 pgs3.41 Mb0
Setup Guide
2 pgs3.43 Mb0
Setup Guide
2 pgs3.45 Mb0
Setup Guide
2 pgs3.41 Mb0
Setup Guide
2 pgs3.45 Mb0
Setup Guide
2 pgs3.46 Mb0
Setup Guide
2 pgs3.47 Mb0
Setup Guide
22 pgs465.78 Kb0
Setup Guide
2 pgs3.44 Mb0
Setup Guide
21 pgs477.48 Kb0
Setup Guide
2 pgs3.43 Mb0
Setup Guide
22 pgs472.15 Kb0
Setup Guide
2 pgs3.43 Mb0
User Guide
646 pgs18.89 Mb0
User manual
672 pgs19.32 Mb0
User's Guide
32 pgs1.47 Mb0
User's Guide
31 pgs1.46 Mb0
User's Guide
31 pgs1.47 Mb0
User's Guide
34 pgs1.48 Mb0
User's Guide
33 pgs1.48 Mb0
User's Guide
35 pgs1.48 Mb0
User's Guide
30 pgs1.46 Mb0
User's Guide
31 pgs1.4 Mb0
User's Guide
31 pgs1.47 Mb0
User's Guide
28 pgs1.41 Mb0
User's Guide
31 pgs1.46 Mb0
User's Guide
32 pgs1.42 Mb0
User's Guide
33 pgs1.46 Mb0
User's Guide
34 pgs1.48 Mb0
Table of contents
Loading...

Brother MFC-J1300DW User Guide

Download
Page 1
Online User's Guide
DCP-J1100DW MFC-J1300DW
© 2018 Brother Industries, Ltd. All rights reserved.
Page 2
Home > Table of Contents

Table of Contents

Before You Use Your Brother Machine ............................................................................................... 1
Definitions of Notes ........................................................................................................................................ 2
Trademarks .................................................................................................................................................... 3
Important Note ............................................................................................................................................... 4
Introduction to Your Brother Machine................................................................................................. 5
Before Using Your Machine ........................................................................................................................... 6
Control Panel Overview ................................................................................................................................. 7
Touchscreen LCD Overview........................................................................................................................... 9
Settings Screen Overview ...........................................................................................................................14
Navigate the Touchscreen............................................................................................................................ 16
Set the Default Screen of the Feature Mode................................................................................................ 17
Access Brother Utilities (Windows) .............................................................................................................. 18
USB / Ethernet Port Locations on Your Brother Machine ............................................................................ 20
Paper Handling.................................................................................................................................... 22
Load Paper................................................................................................................................................... 23
Load Documents .......................................................................................................................................... 49
Print ...................................................................................................................................................... 54
Print from Your Computer (Windows)...........................................................................................................55
Print from Your Computer (Mac) .................................................................................................................. 76
i
Page 3
Home > Table of Contents
Scan...................................................................................................................................................... 89
Scan Using the Scan Button on Your Brother Machine ............................................................................... 90
Scan from Your Computer (Windows) ........................................................................................................ 132
Scan Using Nuance™ PaperPort™ 14SE or Other Windows Applications....................................... 164
Scan Using Windows Fax and Scan ................................................................................................ 169
Install BookScan Enhancer and Whiteboard Enhancer (Windows) ................................................. 172
Scan from Your Computer (Mac)................................................................................................................ 173
Scan Using Brother iPrint&Scan (Mac) ............................................................................................ 174
Scan Using TWAIN-Compliant Applications (Mac)........................................................................... 175
Configure Scan Settings Using Web Based Management......................................................................... 178
Set the Scan Job Email Report Using Web Based Management .................................................... 179
Copy ................................................................................................................................................... 180
Copy a Document ..................................................................................................................................... 181
Enlarge or Reduce Copied Images ............................................................................................................ 183
Sort Copies ................................................................................................................................................ 184
Make Page Layout Copies ( N in 1 or Poster)............................................................................................ 185
Copy on Both Sides of the Paper (2-sided Copy) ...................................................................................... 187
Copy an ID Card ........................................................................................................................................ 189
Copy in Ink Save Mode ............................................................................................................................. 191
Copy Options ............................................................................................................................................. 192
Fax ...................................................................................................................................................... 195
Send a Fax.................................................................................................................................................196
Send a Fax from Your Brother Machine ........................................................................................... 197
Send a Fax Manually........................................................................................................................ 199
Send a Fax at the End of a Conversation ........................................................................................ 200
Send the Same Fax to More than One Recipient (Broadcasting) .................................................... 201
Send a Fax in Real Time.................................................................................................................. 204
Send a Fax at a Specified Time (Delayed Fax)................................................................................ 205
Change the Fax Auto Redial Setting ................................................................................................ 206
Cancel a Fax in Progress ................................................................................................................. 207
ii
Page 4
Home > Table of Contents
Receive a Fax ............................................................................................................................................ 210
Voice Operations and Fax Numbers .......................................................................................................... 237
Telephone Services and External Devices ................................................................................................. 249
Fax Reports ............................................................................................................................................... 267
PC-FAX ...................................................................................................................................................... 270
PhotoCapture Center ........................................................................................................................ 294
Print Photos Directly from Media................................................................................................................ 295
Copy Photos from Media to a Computer....................................................................................................307
Print Photos from ControlCenter4 (Windows) ............................................................................................ 310
Network .............................................................................................................................................. 314
Configure Network Details Using the Control Panel .................................................................................. 315
Supported Basic Network Features ........................................................................................................... 316
Network Management Software and Utilities ............................................................................................. 317
Additional Methods of Configuring Your Brother Machine for a Wireless Network .................................... 319
Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected
Setup™ (WPS).................................................................................................................................. 321
iii
Page 5
Home > Table of Contents
Configure Your Machine for a Wireless Network Using the PIN Method of Wi-Fi Protected
Setup™ (WPS).................................................................................................................................. 322
Use Wi-Fi Direct®............................................................................................................................. 328
Advanced Network Features......................................................................................................................337
Print the Network Configuration Report............................................................................................ 338
Configure and Operate LDAP Search .............................................................................................. 339
Synchronize Time with the SNTP Server Using Web Based Management ..................................... 342
Technical Information for Advanced Users................................................................................................. 345
Reset the Network Settings to Factory Default ................................................................................ 346
Print the WLAN Report..................................................................................................................... 347
Security .............................................................................................................................................. 350
Network Security Features.........................................................................................................................351
Before Using Network Security Features ......................................................................................... 352
Secure Function Lock 3.0................................................................................................................. 353
Use Active Directory Authentication ................................................................................................. 360
Use LDAP Authentication................................................................................................................. 364
Manage Your Network Machine Securely Using SSL/TLS ............................................................... 368
Manage Your Network Machine Securely Using IPsec .................................................................... 391
Send an Email Securely ................................................................................................................... 405
Use IEEE 802.1x Authentication for a Wired or a Wireless Network ............................................... 409
Mobile/Web Connect......................................................................................................................... 414
Brother Web Connect................................................................................................................................. 415
Brother Web Connect Overview....................................................................................................... 416
Online Services Used with Brother Web Connect............................................................................ 417
Conditions for Using Brother Web Connect...................................................................................... 419
Set Up Brother Web Connect........................................................................................................... 423
Scan and Upload Documents Using Brother Web Connect............................................................. 431
Upload a Document from an External Memory Device Using Brother Web Connect ...................... 432
Download and Print Documents Using Brother Web Connect ......................................................... 433
Download and Save a Document to an External Memory Device Using Brother Web Connect...... 436
FaxForward to Cloud or E-mail ........................................................................................................ 437
Google Cloud Print.....................................................................................................................................440
Google Cloud Print Overview ........................................................................................................... 441
Before Using Google Cloud Print ..................................................................................................... 442
Print from Google Chrome™ or Chrome OS™................................................................................. 446
Print from Google Drive™ for Mobile ................................................................................................ 447
Print from Gmail™ Webmail Service for Mobile................................................................................448
AirPrint ....................................................................................................................................................... 449
Mobile Printing for Windows....................................................................................................................... 457
Mopria® Print Service................................................................................................................................. 458
iv
Page 6
Home > Table of Contents
Brother iPrint&Scan for Mobile Devices ..................................................................................................... 459
Near-Field Communication (NFC).............................................................................................................. 460
ControlCenter .................................................................................................................................... 461
ControlCenter4 (Windows).........................................................................................................................462
Brother iPrint&Scan for Windows and Mac.................................................................................... 471
Brother iPrint&Scan Overview.................................................................................................................... 472
Troubleshooting................................................................................................................................ 473
Error and Maintenance Messages ............................................................................................................. 474
Document Jams ......................................................................................................................................... 488
Printer Jam or Paper Jam .......................................................................................................................... 492
If You Are Having Difficulty with Your Machine ..........................................................................................504
Check the Machine Information ................................................................................................................. 531
Reset Your Brother Machine ......................................................................................................................532
Routine Maintenance ........................................................................................................................ 534
Replace the Ink Cartridges......................................................................................................................... 535
Clean Your Brother Machine ......................................................................................................................538
Check Your Brother Machine ..................................................................................................................... 551
v
Page 7
Home > Table of Contents
Correct the Paper Feed to Clear Vertical Lines.......................................................................................... 564
Change the Print Setting Options When Having Printing Problems........................................................... 565
Pack and Ship Your Brother Machine ........................................................................................................ 566
Machine Settings............................................................................................................................... 568
Change Machine Settings from the Control Panel ..................................................................................... 569
Change Machine Settings from Your Computer ......................................................................................... 610
Appendix............................................................................................................................................ 628
Specifications ............................................................................................................................................. 629
Enter Text on Your Brother Machine .......................................................................................................... 636
Information Regarding Recycled Paper ..................................................................................................... 637
Brother Numbers........................................................................................................................................638
vi
Page 8
Home > Before You Use Your Brother Machine

Before You Use Your Brother Machine

• Definitions of Notes
• Trademarks
• Important Note
1
Page 9
Home > Before You Use Your Brother Machine > Definitions of Notes

Definitions of Notes

We use the following symbols and conventions throughout this User's Guide:
WARNING
CAUTION
IMPORTANT
NOTE
Bold Bold style identifies buttons on the machine's control panel or computer screen.
Italics Italicised style emphasises an important point or refers you to a related topic.
Courier New
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injuries.
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injuries.
IMPORTANT indicates a potentially hazardous situation which, if not avoided, may result in damage to property or loss of product functionality.
NOTE specifies the operating environment, conditions for installation, or special conditions of use.
Tips icons indicate helpful hints and supplementary information.
Electrical Hazard icons alert you to possible electrical shock.
Courier New font identifies messages shown on the machine's LCD.
Related Information
• Before You Use Your Brother Machine
2
Page 10
Home > Before You Use Your Brother Machine > Trademarks

Trademarks

Apple, App Store, Mac, Safari, iPad, iPhone, iPod touch and macOS are trademarks of Apple Inc., registered in the United States and other countries.
AirPrint and the AirPrint logo are trademarks of Apple Inc., registered in the U.S. and other countries.
Nuance and PaperPort are trademarks or registered trademarks of Nuance Communications, Inc. or its affiliates in the United States and/or other countries.
The SDHC Logo is a trademark of SD-3C, LLC.
Wi-Fi®, Wi-Fi Alliance® and Wi-Fi Direct® are registered trademarks of Wi-Fi Alliance®.
WPA™, WPA2™, Wi-Fi Protected Setup™ and Wi-Fi Protected Setup™ logo are trademarks of Wi-Fi Alliance®.
Android, Gmail, Google Cloud Print, Google Drive, Google Play, Google Chrome, Chrome OS and Google are trademarks of Google LLC. Use of these trademarks are subject to Google Permissions.
Mozilla and Firefox are registered trademarks of the Mozilla Foundation.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Brother Industries, Ltd. and related companies is under license. Other trademarks and trade names are those of their respective owners.
Intel is a trademark of Intel Corporation in the U.S. and/or other countries.
Evernote and the Evernote Elephant logo are trademarks of Evernote Corporation and used under a license.
Mopria® and the Mopria® logo are registered trademarks and service marks of Mopria Alliance, Inc. in the United States and other countries. Unauthorized use is strictly prohibited.
WordPerfect is a trademark or a registered trademark of Corel Corporation and/or its subsidiaries in Canada, the United States and/or other countries.
Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary programs.
Any trade names and product names of companies appearing on Brother products, related documents and any other materials are all trademarks or registered trademarks of those respective companies.
Related Information
• Before You Use Your Brother Machine
3
Page 11
Home > Before You Use Your Brother Machine > Important Note

Important Note

• Do not use this product outside the country of purchase as it may violate the wireless telecommunication and power regulations of that country.
• Windows 10 in this document represents Windows 10 Home, Windows 10 Pro, Windows 10 Education and Windows 10 Enterprise.
• Windows Server 2008 in this document represents Windows Server 2008 and Windows Server 2008 R2.
• In this User's Guide, the LCD messages of the MFC-J1300DW are used unless otherwise specified.
• In this User's Guide, the illustrations of the MFC-J1300DW are used unless otherwise specified.
• The screens in this User's Guide are for illustration purposes only and may differ from the actual screens.
• Unless otherwise specified, the screens in this manual are from Windows 7 and macOS v10.12.x. Screens on your computer may vary depending on your operating system.
• The contents of this guide and the specifications of this product are subject to change without notice.
• This documentation is for both MFC and DCP models. Read 'XXX-XXXX' as 'MFC/DCP-XXXX' (where XXXX is the name of your model).
Related Information
• Before You Use Your Brother Machine
4
Page 12
Home > Introduction to Your Brother Machine

Introduction to Your Brother Machine

• Before Using Your Machine
• Control Panel Overview
• Touchscreen LCD Overview
• Settings Screen Overview
• Navigate the Touchscreen
• Set the Default Screen of the Feature Mode
• Access Brother Utilities (Windows)
• USB / Ethernet Port Locations on Your Brother Machine
5
Page 13
Home > Introduction to Your Brother Machine > Before Using Your Machine

Before Using Your Machine

Before attempting any printing operation, confirm the following:
• Make sure you have installed the Brother software and drivers.
• For USB or network cable users: Make sure the interface cable is physically secure.
Selecting the correct type of paper
For high quality printing, it is important to select the correct type of paper. Be sure to read the information about acceptable paper before buying paper, and to determine the printable area depending on the settings in the printer driver.
Simultaneous printing, scanning and faxing
Your machine can print from your computer while sending or receiving a fax into memory or while scanning a document into the computer. Fax sending will not be stopped during printing from your computer. However, when the machine is copying or receiving a fax on paper, it pauses the printing operation, and then continues printing when copying or fax receiving has finished.
DCP models do not support the fax feature.
Firewall (Windows)
If your computer is protected by a firewall and you are unable to network print, network scan, or PC-FAX, you may need to configure the firewall settings. If you are using the Windows Firewall and you installed the drivers using the steps in the installer, the necessary firewall settings have been already set. If you are using any other personal firewall software, see the User's Guide for your software or contact the software manufacturer.
Related Information
• Introduction to Your Brother Machine
6
Page 14
Home > Introduction to Your Brother Machine > Control Panel Overview
3
2
5
41

Control Panel Overview

1. NFC (Near Field Communication) symbol
(MFC-J1300DW)
If your Android™ device supports the NFC feature, you can print from your device or scan documents to your device by touching it to the NFC logo on the control panel.
2. Touchscreen Liquid Crystal Display (LCD)
Access menus and options by pressing them on the touchscreen.
3. Menu buttons
(Back)
Press to go back to the previous menu.
(Home)
Press to return to the Home screen.
(Cancel)
Press to cancel an operation.
4. LED Power Indicator
The LED lights up depending on the machine’s power status.
When the machine is in Sleep Mode, the LED blinks.
5.
Power On/Off
Press
to turn the machine on.
Press and hold down to turn the machine off. The touchscreen displays [Shutting Down] and stays
on for a few seconds before turning itself off. If you have connected an external telephone or TAD, it is always available (MFC models).
If you turn the machine off using
prolong print head life, provide better ink efficiency, and maintain print quality, keep your machine connected to a power source at all times.
, it will still clean the print head periodically to maintain print quality. To
7
Page 15
Related Information
• Introduction to Your Brother Machine
• Near-Field Communication (NFC)
8
Page 16
Home > Introduction to Your Brother Machine > Touchscreen LCD Overview
1
7
5
2
3
4
6

Touchscreen LCD Overview

MFC-J1300DW
You can switch Home screens by pressing d or c.
From the Home screens, you can access the Wi-Fi® setup, Shortcuts, Ink levels, and Settings screens.
Home Screen
This screen shows the machine’s status when the machine is idle. When displayed, it indicates that your machine is ready for the next command.
1. Date & Time
Displays the date and time set on the machine.
2.
3. [Shortcuts]
Quiet Mode
This icon appears when the [Quiet Mode] setting is set to [On].
The Quiet Mode setting can reduce printing noise. When Quiet Mode is turned on, the print speed becomes slower.
Create Shortcuts for frequently-used operations, such as sending a fax, copying, scanning, Web Connect and Apps services.
• There are three Shortcuts screens. You can program four shortcuts on each screen.
• To display the other Shortcuts screens, press d or c.
4. Wireless Status
Each icon in the following table shows the wireless network status:
9
Page 17
Your machine is not connected to the wireless access point/router.
8
9
Press this button to configure wireless settings. For more detailed information, see the Quick Setup Guide.
The wireless network is connected.
A three-level indicator in each of the Home screens displays the current wireless signal strength.
The wireless access point/router cannot be detected.
The wireless setting is disabled.
You can configure wireless settings by pressing the Wireless Status button.
5. [Settings]
Press to access the [Settings] menu.
6. [Ink]
Displays the approximate available ink volume. Press to access the [Ink] menu.
When an ink cartridge is near the end of its life or having a problem, an error icon is displayed on the ink colour.
7. Modes:
Press to switch to each mode.
[Fax] / [Copy] / [Scan] / [Photo] / [Web] / [Apps] / [Download Software]
8. Information icon
New information from Brother appears in the information bar when the notification settings such as [Message from Brother] and [Firmware Auto Check] are set to [On].
(Internet connection is needed, and data rates may apply.)
Press to view the details.
9. Warning icon
The warning icon appears when there is an error or maintenance message; press to view the
details, and then press to return to the Home screen.
10
Page 18
DCP-J1100DW
6
4
1
2
3
5
You can switch Home screens by pressing d or c.
From the Home screens, you can access the Wi-Fi® setup, Shortcuts, Ink levels, and Setup screens.
Home Screen
This screen shows the machine’s status when the machine is idle. When displayed, it indicates that your machine is ready for the next command.
1. Quiet Mode
This icon appears when the [Quiet Mode] setting is set to [On].
The Quiet Mode setting can reduce printing noise. When Quiet Mode is turned on, the print speed becomes slower.
2. [Shortcuts]
Create Shortcuts for frequently-used operations, such as copying, scanning, Web Connect and Apps services.
• There are three Shortcuts screens. You can program four shortcuts on each screen.
• To display the other Shortcuts screens, press d or c.
3. Wireless Status
Each icon in the following table shows the wireless network status:
Your machine is not connected to the wireless access point/router.
Press this button to configure wireless settings. For more detailed information, see the Quick Setup Guide.
The wireless network is connected.
A three-level indicator in each of the Home screens displays the current wireless signal strength.
11
Page 19
The wireless access point/router cannot be detected.
7
8
The wireless setting is disabled.
You can configure wireless settings by pressing the Wireless Status button.
4. [Settings]
Press to access the [Settings] menu.
5. [Ink]
Displays the approximate available ink volume. Press to access the [Ink] menu.
When an ink cartridge is near the end of its life or having a problem, an error icon is displayed on the ink colour.
6. Modes:
Press to switch to each mode.
[Copy] / [Scan] / [Photo] / [Web] / [Apps] / [Download Software]
7. Information icon
New information from Brother appears in the information bar when the notification settings such as [Message from Brother] and [Firmware Auto Check] are set to [On].
(Internet connection is needed, and data rates may apply.)
Press to view the details.
8. Warning icon
The warning icon appears when there is an error or maintenance message; press to view the
details, and then press to return to the Home screen.
Related Information
• Introduction to Your Brother Machine
• Reduce Printing Noise
• Check the Ink Volume (Page Gauge)
12
Page 20
• Settings Screen Overview
• Error and Maintenance Messages
13
Page 21
Home > Introduction to Your Brother Machine > Settings Screen Overview
4
1
3
2
6
7
8
5

Settings Screen Overview

MFC-J1300DW
The touchscreen shows the machine's status when you press [Settings].
Use the Settings menu to access all of your Brother machine's settings.
1. [Maintenance]
Press to access the following menus:
• [Improve Print Quality]
• [Print Head Cleaning]
• [Ink Volume]
• [Ink Cartridge Model]
• [Print Setting Options]
2. [Quiet Mode]
Displays the Quiet Mode setting.
Press to access the [Quiet Mode] menu.
When this menu is set to [On],
3. [Fax Preview]
Displays the Fax Preview setting.
Press to access the [Fax Preview] menu.
4. Receive Mode
Displays the current Receive Mode.
5. [Date & Time]
Displays the date and time.
Press to access the [Date & Time] menu.
6. [Wi-Fi]
Press to set up a wireless network connection.
If you are using a wireless connection, a three-level indicator on the screen displays the current wireless
signal strength.
7. [Tray Setting]
Press to access the [Tray Setting] menu.
Use options in the Tray setting menu to change the paper size and type.
8. [All Settings]
Press to access a menu of all of your machine's settings.
is displayed on the Home screen.
14
Page 22
DCP-J1100DW
1
3
2
5
6
7
4
The touchscreen shows the machine's status when you press [Settings].
Use the Settings menu to access all of your Brother machine's settings.
1. [Maintenance]
Press to access the following menus:
• [Improve Print Quality]
• [Print Head Cleaning]
• [Ink Volume]
• [Ink Cartridge Model]
• [Print Setting Options]
2. [Paper Type]
Press to access the [Paper Type] menu.
Use this option to change the paper type.
3. [Quiet Mode]
Displays the Quiet Mode setting.
Press to access the [Quiet Mode] menu.
When this menu is set to [On],
4. [Date & Time]
Displays the date and time.
Press to access the [Date & Time] menu.
5. [Wi-Fi]
Press to set up a wireless network connection.
If you are using a wireless connection, a three-level indicator on the screen displays the current wireless
signal strength.
6. [Paper Size]
Press to access the [Paper Size] menu.
Use this option to change the paper size.
7. [All Settings]
Press to access a menu of all of your machine's settings.
Related Information
• Introduction to Your Brother Machine
• Touchscreen LCD Overview
• Check the Ink Volume (Page Gauge)
is displayed on the Home screen.
15
Page 23
Home > Introduction to Your Brother Machine > Navigate the Touchscreen

Navigate the Touchscreen

Press your finger on the LCD to operate it. To display and access all the options, press d c or a b on the LCD to scroll through them.
NOTE
• This product adopts the font of ARPHIC TECHNOLOGY CO., LTD.
Related Information
• Introduction to Your Brother Machine
16
Page 24
Home > Introduction to Your Brother Machine > Set the Default Screen of the Feature Mode

Set the Default Screen of the Feature Mode

You can change the default screen of the Scan mode.
1. Press [Settings] > [All Settings] > [General Setup] > [Screen Settings] > [Scan
Screen].
2. Press a or b to display the scan options, and then press the option you want in the default screen.
3. Press
.
Related Information
• Introduction to Your Brother Machine
17
Page 25
Home > Introduction to Your Brother Machine > Access Brother Utilities (Windows)

Access Brother Utilities (Windows)

Brother Utilities is an application launcher that offers convenient access to all Brother applications installed on
your computer.
1. Do one of the following:
• Windows 7
Click
• Windows 8
Tap or click (Brother Utilities) either on the Start screen or the desktop.
• Windows 8.1
Move your mouse to the lower left corner of the Start screen and click
device, swipe up from the bottom of the Start screen to bring up the Apps screen).
When the Apps screen appears, tap or click (Brother Utilities).
• Windows 10
Click
2. Select your machine.
(Start) > All Programs > Brother > Brother Utilities.
> Brother > Brother Utilities.
(if using a touch-based
3. Select the operation you want to use.
Related Information
• Introduction to Your Brother Machine
• Uninstall the Brother Software and Drivers (Windows)
18
Page 26
Home > Introduction to Your Brother Machine > Access Brother Utilities (Windows) > Uninstall the Brother
Software and Drivers (Windows)

Uninstall the Brother Software and Drivers (Windows)

1. Do one of the following:
• Windows 7
Click
• Windows 8
Tap or click (Brother Utilities) either on the Start screen or the desktop.
• Windows 8.1
Move your mouse to the lower left corner of the Start screen and click
device, swipe up from the bottom of the Start screen to bring up the Apps screen).
When the Apps screen appears, tap or click (Brother Utilities).
• Windows 10
Click
2. Click the drop-down list, and then select your model name (if not already selected). Click Tools in the left navigation bar, and then click Uninstall.
Follow the instructions in the dialog box to uninstall the software and drivers.
(Start) > All Programs > Brother > Brother Utilities.
(if using a touch-based
> Brother > Brother Utilities.
Related Information
• Access Brother Utilities (Windows)
19
Page 27
Home > Introduction to Your Brother Machine > USB / Ethernet Port Locations on Your Brother Machine
1

USB / Ethernet Port Locations on Your Brother Machine

The USB and Ethernet ports are located inside the machine.
• When connecting the USB or Ethernet cable, follow the instructions in the installation process.
• To install the Full Driver & Software Package necessary for operating your machine, insert the Brother installation disc into your computer, or go to your model's Downloads page on the Brother Solutions Center at
1. Place both hands under the plastic tabs on both sides of the machine to lift the scanner cover (1) into the open position.
support.brother.com.
2. Locate the correct port (based on the cable you are using) inside the machine as shown.
Carefully guide the cable through the cable channel and out the back of the machine.
3. Gently close the scanner cover using both hands.
20
Page 28
Related Information
• Introduction to Your Brother Machine
21
Page 29
Home > Paper Handling

Paper Handling

• Load Paper
• Load Documents
22
Page 30
Home > Paper Handling > Load Paper

Load Paper

• Load Paper in the Paper Tray
• Load Paper in the Manual Feed Slot
• Unprintable Area
• Paper Settings
• Acceptable Paper and Other Print Media
• Error and Maintenance Messages
• Paper Handling and Printing Problems
23
Page 31
Home > Paper Handling > Load Paper > Load Paper in the Paper Tray

Load Paper in the Paper Tray

• Load Cut-Sheet Paper or Photo 2L Paper in the Paper Tray
• Load Photo Paper in the Paper Tray
• Load Envelopes in the Paper Tray
24
Page 32
Home > Paper Handling > Load Paper > Load Paper in the Paper Tray > Load Cut-Sheet Paper or Photo
2
1
1
2L Paper in the Paper Tray
Load Cut-Sheet Paper or Photo 2L Paper in the Paper Tray
• If the [Check Paper] setting is set to [On] and you pull the paper tray out of the machine, a message appears on the LCD asking if you want to change the paper type and paper size.
• Load only one size and type of paper in the paper tray at a time.
• When you load a different paper size in the tray, you must change the Paper Size setting in the machine or the paper size setting on your computer.
1. If the paper support flap (1) is open, close it, and then close the paper support (2).
2. Pull the paper tray completely out of the machine.
3. Open the output paper tray cover (1).
4. Gently press and slide the paper width guides (1) and then the paper length guide (2) to fit the paper size.
25
Page 33
1
2
5. Fan the stack of paper well to avoid paper jams and misfeeds.
1
Always make sure the paper is not curled or wrinkled.
6. Gently load paper in the paper tray with the printing surface face down.
Make sure the paper is flat in the tray and the paper length guide (1) touches the edges of the paper.
26
Page 34
IMPORTANT
1
2
1
• Be careful not to push the paper in too far; it may lift at the back of the tray and cause paper feed problems.
• Loading more than 20 sheets of Photo 2L (13 x 18 cm) paper may cause paper jams.
To add paper before the tray is empty, remove the paper from the tray and combine it with the paper you are adding. Always fan the stack of paper well to prevent the machine from feeding multiple pages.
7. Gently adjust the paper width guides (1) to fit the paper.
Make sure the paper width guides touch the edges of the paper.
8. Close the output paper tray cover.
9. Slowly push the paper tray completely into the machine.
10. Pull out the paper support (1) until it locks into place, and then unfold the paper support flap (2).
Related Information
• Load Paper in the Paper Tray
27
Page 35
• Change the Check Paper Size Setting
• Choose the Right Print Media
• Change the Paper Size and Paper Type
28
Page 36
Home > Paper Handling > Load Paper > Load Paper in the Paper Tray > Load Photo Paper in the Paper
2
1
1
Tray
Load Photo Paper in the Paper Tray
• If the [Check Paper] setting is set to [On] and you pull the paper tray out of the machine, a message appears on the LCD asking if you want to change the paper type and paper size.
• Load only one size and type of paper in the paper tray at a time.
• When you load a different paper size in the tray, you must change the Paper Size setting in the machine or the paper size setting on your computer.
1. If the paper support flap (1) is open, close it, and then close the paper support (2).
2. Pull the paper tray completely out of the machine.
3. Open the output paper tray cover (1).
4. Gently press and slide the paper width guides (1) to fit the paper size, and then lift up the stopper (2).
29
Page 37
1
2
5. Close the output paper tray cover.
1
6. Load up to 20 sheets of photo paper with the printing surface face down.
Loading more than 20 sheets of photo paper may cause paper jams.
7. Gently adjust the paper width guides (1) to fit the paper.
Make sure the paper width guides touch the edges of the paper and the paper is flat in the tray.
8. Slowly push the paper tray completely into the machine.
30
Page 38
9. Pull out the paper support (1) until it locks into place, and then unfold the paper support flap (2).
2
1
Related Information
• Load Paper in the Paper Tray
• Change the Check Paper Size Setting
• Choose the Right Print Media
• Change the Paper Size and Paper Type
31
Page 39
Home > Paper Handling > Load Paper > Load Paper in the Paper Tray > Load Envelopes in the Paper
2
1
1
Tray
Load Envelopes in the Paper Tray
• If the [Check Paper] setting is set to [On] and you pull the paper tray out of the machine, a message appears on the LCD asking if you want to change the paper type and paper size.
• You can load envelopes in a variety of sizes. See Related Information: Paper Type and Paper Size for Each Operation.　
• When you load a different paper size in the tray, you must change the Paper Size setting in the machine or the paper size setting on your computer.
• Before loading envelopes in the tray, press the corners and sides of the envelopes to make them as flat as possible.
1. If the paper support flap (1) is open, close it, and then close the paper support (2).
2. Pull the paper tray completely out of the machine.
3. Open the output paper tray cover (1).
4. Load up to 10 envelopes in the paper tray with the printing surface face down. Loading more than 10
envelopes may cause paper jams.
32
Page 40
5. Gently press and slide the paper width guides (1) and paper length guide (2) to fit the size of the envelopes.
1
2
Make sure the envelopes are flat in the tray.
IMPORTANT
If envelopes are "double-feeding," load one envelope in the paper tray at a time.
6. Close the output paper tray cover.
7. Slowly push the paper tray completely into the machine.
33
Page 41
8. Pull out the paper support (1) until it locks into place, and then unfold the paper support flap (2).
2
1
Related Information
• Load Paper in the Paper Tray
• Change the Check Paper Size Setting
• Choose the Right Print Media
• Change the Paper Size and Paper Type
• Paper Type and Paper Size for Each Operation
34
Page 42
Home > Paper Handling > Load Paper > Load Paper in the Manual Feed Slot

Load Paper in the Manual Feed Slot

Load special print media in this slot, one sheet of paper at a time.
The machine automatically turns on Manual Feed mode when you put paper in the manual feed slot.
1. Open the manual feed slot cover.
2. Lift up the paper support.
3. Slide the manual feed slot paper guides to fit the width of the paper you are using.
4. Load only one sheet of paper in the manual feed slot with the printing surface face up.
35
Page 43
When using envelopes, load the envelopes with the printing surface face up and the flap on the left as shown in the illustration.
IMPORTANT
• DO NOT load more than one sheet of paper in the manual feed slot at any time. Doing this may
cause a paper jam. When printing multiple pages, do not feed the next sheet of paper until the LCD displays a message instructing you to feed the next sheet.
• DO NOT load paper in the manual feed slot when you are printing from the paper tray. Doing this may cause a paper jam.
36
Page 44
5. Using both hands, push one sheet of paper into the manual feed slot until the front edge touches the paper
2
1
feed rollers. Let go of the paper when you hear the machine pull it. The LCD displays [Manual Feed Slot ready]. Read the instruction displayed on the LCD, and then press [OK].
When loading an envelope, or a sheet of thick paper, push the envelope into the manual feed slot until you feel the paper feed rollers pull it.
6. Pull out the paper support (1) until it locks into place, and then unfold the paper support flap (2).
• If the document does not fit on one sheet, the machine will prompt you to load another sheet of paper. Place another sheet of paper in the manual feed slot, and then press [OK] on the machine's control panel.
• Make sure printing has finished before you close the manual feed slot cover.
• When paper is placed in the manual feed slot, the machine always prints from the manual feed slot.
• The machine will eject paper loaded in the manual feed slot while a test page, fax, or report is being printed.
• The machine will eject paper loaded in the manual feed slot during the machine's cleaning process. Wait until the machine finishes its cleaning, and then load paper in the manual feed slot.
Related Information
• Load Paper
• Choose the Right Print Media
• Error and Maintenance Messages
37
Page 45
Home > Paper Handling > Load Paper > Unprintable Area

Unprintable Area

The unprintable area depends on the settings in the application you are using. The figures below show the unprintable areas on cut-sheet paper and envelopes. The machine can print in the shaded areas of cut-sheet paper only when the Borderless print feature is available and turned on.
Cut-Sheet Paper
Envelopes
Top (1)
Cut-Sheet 3 mm 3 mm 3 mm 3 mm
Envelopes 12 mm 3 mm 12 mm 3 mm
The Borderless print feature is not available for envelopes and 2-sided printing.
Left (2) Bottom (3) Right (4)
Related Information
• Load Paper
• Paper Handling and Printing Problems
38
Page 46
Home > Paper Handling > Load Paper > Paper Settings

Paper Settings

• Change the Paper Size and Paper Type
• Change the Check Paper Size Setting
• Shrink Page Size of an Oversized Incoming Fax
39
Page 47
Home > Paper Handling > Load Paper > Paper Settings > Change the Paper Size and Paper Type
Change the Paper Size and Paper Type
Set the Paper Size and Paper Type settings for the paper tray.
• To get the best print quality, set the machine for the type of paper you are using.
• When you change the size of the paper you load in the tray, you must change the Paper Size setting on the LCD at the same time.
1. Press [Settings] > [All Settings] > [General Setup].
2. Press [Paper Type].
3. Press a or b to display the paper type options, and then press the option you want.
4. Press [Paper Size].
5. Press a or b to display the paper size options, and then press the option you want.
6. Press .
The machine ejects paper with the printed surface face up onto the paper tray at the front of the machine. When you use glossy paper, remove each sheet at once to prevent smudging or paper jams.
Related Information
• Paper Settings
• Load Cut-Sheet Paper or Photo 2L Paper in the Paper Tray
• Load Photo Paper in the Paper Tray
• Load Envelopes in the Paper Tray
• Acceptable Paper and Other Print Media
• Error and Maintenance Messages
• Paper Handling and Printing Problems
40
Page 48
Home > Paper Handling > Load Paper > Paper Settings > Change the Check Paper Size Setting
Change the Check Paper Size Setting
If this setting is set to [On] and you pull the paper tray out of the machine, the LCD displays a message asking if you want to change the Paper Size and Paper Type settings.
The default setting is [On].
1. Press
2. Press a or b to display the [Check Paper] option, and then press it.
3. Press [On] or [Off].
4. Press .
[Settings] > [All Settings] > [General Setup].
Related Information
• Paper Settings
• Load Cut-Sheet Paper or Photo 2L Paper in the Paper Tray
• Load Photo Paper in the Paper Tray
• Load Envelopes in the Paper Tray
• Error and Maintenance Messages
41
Page 49
Home > Paper Handling > Load Paper > Acceptable Paper and Other Print Media

Acceptable Paper and Other Print Media

The print quality can be affected by the type of paper you use in the machine.
To get the best print quality for the settings you have selected, always set the Paper Type to match the type of paper you load.
You can use plain paper, inkjet paper (coated paper), glossy paper, recycled paper and envelopes.
We recommend testing various paper types before buying large quantities.
For best results, use Brother paper.
• When you print on inkjet paper (coated paper) and glossy paper, be sure to select the correct print media in the Basic tab of the printer driver or in the Paper Type setting on the machine.
• When you print on Brother Photo paper, load one extra sheet of the same photo paper in the paper tray.
• When using photo paper, remove each sheet at once to prevent smudging or paper jams.
• Avoid touching the printed surface of the paper immediately after printing; the surface may not be completely dry and may stain your fingers.
Related Information
• Load Paper
• Recommended Print Media
• Handle and Use Print Media
• Choose the Right Print Media
• Change the Paper Size and Paper Type
• Paper Handling and Printing Problems
42
Page 50
Home > Paper Handling > Load Paper > Acceptable Paper and Other Print Media > Recommended Print
Media
Recommended Print Media
For the best print quality, we recommend using the Brother paper listed in the table.
If Brother paper is not available in your country, we recommend testing various paper types before purchasing large quantities.
Brother paper
Paper Type
A4 Plain BP60PA
A4 Glossy Photo BP71GA4
A4 Inkjet (Matte) BP60MA
10 x 15 cm Glossy Photo BP71GP
Item
Related Information
• Acceptable Paper and Other Print Media
43
Page 51
Home > Paper Handling > Load Paper > Acceptable Paper and Other Print Media > Handle and Use Print
1
1
Media
Handle and Use Print Media
• Store paper in its original packaging and keep it sealed. Keep the paper flat and away from moisture, direct sunlight and heat.
• Avoid touching the shiny (coated) side of photo paper.
• Some envelope sizes require that you set margins in the application. Make sure you do a test print first before printing many envelopes.
IMPORTANT
DO NOT use the following kinds of paper:
• Damaged, curled, wrinkled, or irregularly shaped
1. 2 mm or greater curl may cause jams to occur.
• Extremely shiny or highly textured
• Paper that cannot be arranged uniformly when stacked
• Paper made with a short grain
DO NOT use envelopes that:
• Are loosely constructed
• Have windows
• Are embossed (have raised writing on them)
• Have clasps or staples
• Are pre-printed on the inside
• Are self-adhesive
• Have double flaps
Self-adhesive
You may experience paper feed problems caused by the thickness, size and flap shape of the envelopes you are using.
Double flaps
Related Information
• Acceptable Paper and Other Print Media
• Load Paper in the Paper Tray
44
Page 52
Home > Paper Handling > Load Paper > Acceptable Paper and Other Print Media > Choose the Right Print
Media
Choose the Right Print Media
• Paper Type and Paper Size for Each Operation
• Paper Capacity of the Paper Trays
• Paper Weight and Thickness
• Load Cut-Sheet Paper or Photo 2L Paper in the Paper Tray
• Load Photo Paper in the Paper Tray
• Load Envelopes in the Paper Tray
• Load Paper in the Manual Feed Slot
45
Page 53
Home > Paper Handling > Load Paper > Acceptable Paper and Other Print Media > Choose the Right Print
Media > Paper Type and Paper Size for Each Operation
Paper Type and Paper Size for Each Operation
Paper Type Paper Size Usage
1
Fax
Cut-Sheet A4 210 x 297 mm Yes Yes Yes Yes
Copy Photo
Capture 2
Printer
Letter 215.9 x 279.4
mm
Executive 184.1 x 266.7
mm
A5 148 x 210 mm - Yes - Yes
A6 105 x 148 mm - - - Yes
Cards Photo 10 x 15 cm - Yes Yes Yes
Photo L 9 x 13 cm - - - Yes
Photo 2L 13 x 18 cm - - Yes Yes
Index Card 13 x 20 cm - - - Yes
Envelopes C5 Envelope 162 x 229 mm - - - Yes
DL Envelope 110 x 220 mm - - - Yes
Com-10 104.7 x 241.3
mm
Monarch 98.4 x 190.5 mm - - - Yes
1
MFC models only
2
DCP-J1100DW/MFC-J1300DW only
Yes Yes Yes Yes
- - - Yes
- - - Yes
Related Information
• Choose the Right Print Media
• Load Envelopes in the Paper Tray
46
Page 54
Home > Paper Handling > Load Paper > Acceptable Paper and Other Print Media > Choose the Right Print
Media > Paper Capacity of the Paper Trays
Paper Capacity of the Paper Trays
Paper Size Paper Types No. of sheets
Paper Tray A4, Letter, Executive, A5,
A6, Envelopes (C5, Com-10, DL, Monarch), Photo (10 x 15 cm), Photo 2L (13 x 18 cm), Index card (13 x 20 cm)
Plain Paper, Recycled Paper
Inkjet Paper 20
Glossy Paper, Photo 20
Index Card 30
Envelopes 10
150
1
Manual Feed Slot A4, Letter, Executive, A5,
A6, Envelopes (C5, Com-10, DL, Monarch), Photo (10 x 15 cm), Photo L (9 x 13 cm), Photo 2L (13 x 18 cm), Index card (13 x 20 cm)
1
When using plain paper 80 g/m²
Related Information
• Choose the Right Print Media
Plain Paper, Inkjet Paper, Glossy Paper, Recycled Paper, Photo and Envelopes
1
47
Page 55
Home > Paper Handling > Load Paper > Acceptable Paper and Other Print Media > Choose the Right Print
Media > Paper Weight and Thickness
Paper Weight and Thickness
Paper Type Weight Thickness
Cut-Sheet Plain Paper, Recycled
64 to 120 g/m² 0.08 to 0.15 mm
Paper
Inkjet Paper 64 to 200 g/m² 0.08 to 0.25 mm
Cards
Glossy Paper 1
Photo Card
Index Card
1 2
2
2
Up to 220 g/m² Up to 0.25 mm
Up to 220 g/m² Up to 0.25 mm
Up to 120 g/m² Up to 0.15 mm
Envelopes 80 to 95 g/m² Up to 0.52 mm
1
BP71 260 g/m² paper is specially designed for Brother inkjet machines.
2
Up to 300 g/m² for Manual Feed Slot
Related Information
• Choose the Right Print Media
• Paper Handling and Printing Problems
48
Page 56
Home > Paper Handling > Load Documents

Load Documents

• Load Documents in the Automatic Document Feeder (ADF)
• Load Documents on the Scanner Glass
• Unscannable Area
49
Page 57
Home > Paper Handling > Load Documents > Load Documents in the Automatic Document Feeder (ADF)
1
1

Load Documents in the Automatic Document Feeder (ADF)

The ADF can hold multiple pages and feeds each sheet individually.
Use paper that is within the sizes and weights shown in the table. Always fan the pages before placing them in the ADF.
Document Sizes and Weights
Length 1:
Width: 148 to 215.9 mm
Paper Weight: 64 to 90 g/m²
1
Documents that are longer than 297 mm must be fed one page at a time.
148 to 355.6 mm
IMPORTANT
• DO NOT pull on the document while it is feeding.
• DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper clipped, pasted or taped.
• DO NOT use cardboard, newspaper or fabric.
• Make sure documents with correction fluid or written in ink are completely dry.
1. Lift up and unfold the ADF document support (1).
2. Fan the stack of paper well to avoid paper jams and misfeeds.
3. Adjust the paper guides (1) to fit the document size.
4. Place your document, face down, top edge first in the ADF underneath the paper guides until you feel the document touch the feed rollers and the LCD displays [ADF Ready].
IMPORTANT
DO NOT leave any documents on the scanner glass. If you do this, the ADF may jam.
Related Information
• Load Documents
50
Page 58
• Copy a Document
• Error and Maintenance Messages
• Telephone and Fax Problems
• Other Problems
51
Page 59
Home > Paper Handling > Load Documents > Load Documents on the Scanner Glass

Load Documents on the Scanner Glass

Use the scanner glass to fax, copy, or scan one page at a time.
Document Sizes Supported
Length:
Width: Up to 215.9 mm
Weight: Up to 2 kg
(ADF models)
To use the scanner glass, the ADF must be empty and the ADF document support must be closed.
1. Lift the document cover.
2. Place the document face down in the upper left corner of the scanner glass as shown in the illustration.
Up to 297 mm
3. Close the document cover.
IMPORTANT
If you are scanning a book or thick document, DO NOT slam or press on the document cover.
Related Information
• Load Documents
• Copy a Document
• Telephone and Fax Problems
• Other Problems
52
Page 60
Home > Paper Handling > Load Documents > Unscannable Area

Unscannable Area

The unscannable area of a page depends on the settings in the application you are using. The figures below show the typical unscannable measurements.
Usage Document Size Top (1)
Bottom (3)
Fax A4 3 mm
Letter 4 mm
Legal
Copy All paper sizes 3 mm
Scan 1 mm 1 mm
1
The unscannable area is 1 mm when using the ADF.
Left (2)
Right (4)
3 mm
Related Information
• Load Documents
1
53
Page 61
Home > Print

Print

• Print from Your Computer (Windows)
• Print from Your Computer (Mac)
54
Page 62
Home > Print > Print from Your Computer (Windows)

Print from Your Computer (Windows)

• Print a Photo (Windows)
• Print a Document (Windows)
• Cancel a Print Job (Windows)
• Print More Than One Page on a Single Sheet of Paper (N in 1) (Windows)
• Print as a Poster (Windows)
• Print on Both Sides of the Paper Automatically (Automatic 2-sided Printing) (Windows)
• Print as a Booklet Automatically (Windows)
• Print a Colour Document in Greyscale (Windows)
• Prevent Smudged Printouts and Paper Jams (Windows)
• Use a Preset Print Profile (Windows)
• Change the Default Print Settings (Windows)
• Print Settings (Windows)
55
Page 63
Home > Print > Print from Your Computer (Windows) > Print a Photo (Windows)

Print a Photo (Windows)

1. Select the print command in your application.
2. Select Brother MFC-XXXX Printer (where XXXX is the name of your model), and then click the printing properties or preferences button.
The printer driver window appears.
3. Make sure you have loaded the correct media in the paper tray.
IMPORTANT
• For best results, use Brother paper.
• When you print on Brother photo paper, load one extra sheet of the same photo paper in the paper tray.
4. Click the Basic tab.
5. Click the Media Type drop-down list, and then select the type of paper you are using.
IMPORTANT
To get the best print quality for the settings you have selected, always set the Media Type option to match the type of paper you load.
6. Click the Paper Size drop-down list, and then select your paper size.
7. Select the Borderless check box, if needed.
8. For Colour Mode, select the Natural or Vivid option.
9. In the Orientation field, select the Portrait or Landscape option to set the orientation of your printout.
If your application contains a similar setting, we recommend that you set the orientation using the application.
10. Type the number of copies (1-999) you want in the Copies field.
11. Change other printer settings, if needed.
12. Click OK.
13. Complete your print operation.
Related Information
• Print from Your Computer (Windows)
• Print Settings (Windows)
56
Page 64
Home > Print > Print from Your Computer (Windows) > Print a Document (Windows)

Print a Document (Windows)

1. Select the print command in your application.
2. Select Brother MFC-XXXX Printer (where XXXX is the name of your model), and then click the printing
properties or preferences button.
The printer driver window appears.
3. Make sure you have loaded the correct size paper in the paper tray.
4. Click the Basic tab.
5. Click the Media Type drop-down list, and then select the type of paper you are using.
IMPORTANT
To get the best print quality for the settings you have selected, always set the Media Type option to match the type of paper you load.
6. Click the Paper Size drop-down list, and then select your paper size.
7. For Colour Mode, select the Natural or Vivid option.
8. In the Orientation field, select the Portrait or Landscape option to set the orientation of your printout.
If your application contains a similar setting, we recommend that you set the orientation using the application.
9. Type the number of copies (1-999) you want in the Copies field.
10. To print multiple pages on a single sheet of paper or print one page of your document on multiple sheets,
click the Multiple Page drop-down list, and then select your options.
11. Change other printer settings, if needed.
12. Click OK.
13. Complete your print operation.
Related Information
• Print from Your Computer (Windows)
• Check the Ink Volume (Page Gauge)
• Print Settings (Windows)
57
Page 65
Home > Print > Print from Your Computer (Windows) > Cancel a Print Job (Windows)

Cancel a Print Job (Windows)

If a print job was sent to the print queue and did not print, or was sent to the print queue in error, you may have to delete it to allow subsequent jobs to print.
1. Double-click the printer icon in the task tray.
2. Select the print job you want to cancel.
3. Click the Document menu.
4. Select Cancel.
5. Click Yes.
Related Information
• Print from Your Computer (Windows)
• Monitor Machine Status from Your Computer (Windows)
58
Page 66
Home > Print > Print from Your Computer (Windows) > Print More Than One Page on a Single Sheet of
Paper (N in 1) (Windows)

Print More Than One Page on a Single Sheet of Paper (N in 1) (Windows)

1. Select the print command in your application.
2. Select Brother MFC-XXXX Printer (where XXXX is the name of your model), and then click the printing
properties or preferences button.
The printer driver window appears.
3. Click the Basic tab.
4. In the Orientation field, select the Portrait or Landscape option to set the orientation of your printout.
If your application contains a similar setting, we recommend that you set the orientation using the application.
5. Click the Multiple Page drop-down list, and then select the 2 in 1, 4 in 1, 9 in 1, or 16 in 1 option.
6. Click the Page Order drop-down list, and then select your page order.
7. Click the Border Line drop-down list, and then select your border line type.
8. Change other printer settings, if needed.
9. Click OK, and then complete your print operation.
Related Information
• Print from Your Computer (Windows)
• Print Settings (Windows)
59
Page 67
Home > Print > Print from Your Computer (Windows) > Print as a Poster (Windows)

Print as a Poster (Windows)

Enlarge your print size and print the document in poster mode.
1. Select the print command in your application.
2. Select Brother MFC-XXXX Printer (where XXXX is the name of your model), and then click the printing
properties or preferences button.
The printer driver window appears.
3. Click the Basic tab.
4. Click the Multiple Page drop-down list, and then select the 1 in 2x2 pages or 1 in 3x3 pages option.
5. Change other printer settings, if needed.
6. Click OK.
7. Complete your print operation.
Related Information
• Print from Your Computer (Windows)
• Print Settings (Windows)
60
Page 68
Home > Print > Print from Your Computer (Windows) > Print on Both Sides of the Paper Automatically
(Automatic 2-sided Printing) (Windows)

Print on Both Sides of the Paper Automatically (Automatic 2-sided Printing) (Windows)

• Make sure the jam clear cover is closed.
• If paper is curled, straighten it and put it back in the paper tray.
• Use regular paper. DO NOT use bond paper.
• If the paper is thin, it may wrinkle.
1. Select the print command in your application.
2. Select Brother MFC-XXXX Printer (where XXXX is the name of your model), and then click the printing
properties or preferences button.
The printer driver window appears.
3. Click the Basic tab.
4. In the Orientation field, select the Portrait or Landscape option to set the orientation of your printout.
If your application contains a similar setting, we recommend that you set the orientation using the application.
5. Click the 2-sided / Booklet drop-down list, and then select 2-sided.
6. Click the 2-sided Settings button.
7. Select one of the options from the 2‑sided Type menu.
When 2-sided is selected, four types of 2-sided binding are available for each orientation:
Option for Portrait Description
Long Edge (Left)
Long Edge (Right)
61
Page 69
Option for Portrait Description
Short Edge (Top)
Short Edge (Bottom)
Option for Landscape Description
Long Edge (Top)
Long Edge (Bottom)
Short Edge (Right)
Short Edge (Left)
8. Select the Binding Offset check box if you want to specify the offset for binding in inches or millimetres.
9. Click OK to return to the printer driver window.
10. Change other printer settings, if needed.
The Borderless feature is not available when using this option.
11. Click OK again, and then complete your print operation.
62
Page 70
Related Information
• Print from Your Computer (Windows)
• Print Settings (Windows)
• Print as a Booklet Automatically (Windows)
63
Page 71
Home > Print > Print from Your Computer (Windows) > Print as a Booklet Automatically (Windows)

Print as a Booklet Automatically (Windows)

Use this option to print a document in booklet format using 2-sided printing. The document's pages will be arranged according to the correct page number and will allow you to fold at the centre of the print output without having to change the order of the printed pages.
• Make sure the jam clear cover is closed.
• If paper is curled, straighten it and put it back in the paper tray.
• Use regular paper. DO NOT use bond paper.
• If the paper is thin, it may wrinkle.
1. Select the print command in your application.
2. Select Brother MFC-XXXX Printer (where XXXX is the name of your model), and then click the printing
properties or preferences button.
The printer driver window appears.
3. Click the Basic tab.
4. In the Orientation field, select the Portrait or Landscape option to set the orientation of your printout.
If your application contains a similar setting, we recommend that you set the orientation using the application.
5. Click the 2-sided / Booklet drop-down list, and then select the Booklet option.
6. Click the 2-sided Settings button.
7. Select one of the options from the 2‑sided Type menu.
There are two types of 2-sided binding directions available for each orientation:
Option for Portrait Description
Left Binding
Right Binding
64
Page 72
Option for Landscape Description
Top Binding
Bottom Binding
8. Select one of the options from the Booklet Printing Method menu.
Option Description
All Pages at Once
Divide into Sets
9. Select the Binding Offset check box if you want to specify the offset for binding in inches or millimetres.
10. Click OK to return to the printer driver window.
11. Change other printer settings, if needed.
The Borderless feature is not available when using this option.
12. Click OK.
13. Complete your print operation.
Every page will be printed in booklet format (four pages to every piece of paper, two pages per side). Fold your printout in the middle to create the booklet.
This option prints the whole booklet in smaller individual booklet sets, allowing you to fold at the centre of the smaller individual booklet sets without having to change the order of the printed pages. You can specify the number of sheets in each smaller booklet set (from 1-15). This option can be helpful when folding a printed booklet that has a large number of pages.
Related Information
• Print from Your Computer (Windows)
• Print Settings (Windows)
• Print on Both Sides of the Paper Automatically (Automatic 2-sided Printing) (Windows)
65
Page 73
Home > Print > Print from Your Computer (Windows) > Print a Colour Document in Greyscale (Windows)

Print a Colour Document in Greyscale (Windows)

Greyscale mode makes the print processing speed faster than colour mode. If your document contains colour, selecting Greyscale mode prints your document in 256 levels of greyscale.
1. Select the print command in your application.
2. Select Brother MFC-XXXX Printer (where XXXX is the name of your model), and then click the printing
properties or preferences button.
The printer driver window appears.
3. Click the Advanced tab.
4. For Colour / Greyscale, select Greyscale.
5. Change other printer settings, if needed.
6. Click OK.
7. Complete your print operation.
Related Information
• Print from Your Computer (Windows)
66
Page 74
Home > Print > Print from Your Computer (Windows) > Prevent Smudged Printouts and Paper Jams
(Windows)

Prevent Smudged Printouts and Paper Jams (Windows)

Some types of print media may need more drying time. Change the Reduce Smudge option if you have problems with smudged printouts or paper jams.
1. Select the print command in your application.
2. Select Brother MFC-XXXX Printer (where XXXX is the name of your model), and then click the printing
properties or preferences button.
The printer driver window appears.
3. Click the Advanced tab.
4. Click the Other Print Options button.
5. Select the Reduce Smudge option on the left side of the screen.
6. Select one of the following options:
Media Type
Plain Paper 2-sided Printing or
7. Click OK to return to the printer driver window.
8. Click OK.
9. Complete your print operation.
Option Description
Off Select this mode to print at
Simplex Printing
Low Select this mode to print at
High Select this mode to print at
Related Information
• Print from Your Computer (Windows)
• Paper Handling and Printing Problems
• Change the Print Setting Options When Having Printing Problems
normal speed, using a normal amount of ink.
a slower speed, using a normal amount of ink.
the same speed as Low, but using less ink.
67
Page 75
Home > Print > Print from Your Computer (Windows) > Use a Preset Print Profile (Windows)

Use a Preset Print Profile (Windows)

Print Profiles are presets designed to give you quick access to frequently-used printing configurations.
1. Select the print command in your application.
2. Select Brother MFC-XXXX Printer (where XXXX is the name of your model), and then click the printing
properties or preferences button.
The printer driver window appears.
3. Click the Print Profiles tab.
4. Select your profile from the print profile list.
The profile settings are shown on the left side of the printer driver window.
5. Do one of the following:
• If the settings are correct for your print job, click OK.
• To change the settings, go back to the Basic or Advanced tab, change settings, and then click OK.
To display the Print Profiles tab at the front of the window the next time you print, select the Always show Print Profiles tab first. check box.
68
Page 76
Related Information
• Print from Your Computer (Windows)
• Create or Delete Your Print Profile (Windows)
• Print Settings (Windows)
69
Page 77
Home > Print > Print from Your Computer (Windows) > Use a Preset Print Profile (Windows) > Create or
Delete Your Print Profile (Windows)
Create or Delete Your Print Profile (Windows)
Add up to 20 new print profiles with customised settings.
1. Select the print command in your application.
2. Select Brother MFC-XXXX Printer (where XXXX is the name of your model), and then click the printing
properties or preferences button.
The printer driver window appears.
3. Click the Basic tab and the Advanced tab, and configure the print settings you want for the new Print Profile.
4. Click the Print Profiles tab.
5. Do one of the following:
To create a new print profile:
a. Click Add Profile.
The Add Profile dialog box appears.
b. Type the new profile name in the Name field.
c. Click the icon you want to use to represent this profile from the icon list.
d. Click OK.
The new Print Profile name is added to the list in the Print Profiles tab.
To delete a print profile that you created:
a. Click Delete Profile.
The Delete Profile dialog box appears.
b. Select the profile you want to delete.
c. Click Delete.
d. Click Yes.
e. Click Close.
Related Information
• Use a Preset Print Profile (Windows)
70
Page 78
Home > Print > Print from Your Computer (Windows) > Change the Default Print Settings (Windows)

Change the Default Print Settings (Windows)

When you change an application's print settings, the changes only apply to documents printed with that application. To change print settings for all Windows applications, you must configure the printer driver properties.
1. Do one of the following:
• For Windows Server 2008
Click
• For Windows 7 and Windows Server 2008 R2
Click (Start) > Devices and Printers.
• For Windows 8
Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings, and then click Control Panel. In the Hardware and Sound group, click View devices and printers.
• For Windows 10 and Windows Server 2016
Click
and printers.
• For Windows Server 2012
Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings, and then click Control Panel. In the Hardware group, click View devices and printers.
• For Windows Server 2012 R2
Click Control Panel on the Start screen. In the Hardware group, click View devices and printers.
2. Right-click the Brother MFC-XXXX Printer icon (where XXXX is your model name), and then select Printer properties. If printer driver options appear, select your printer driver.
The printer driver dialog box appears.
3. Click the General tab, and then click the Printing Preferences... or Preferences... button.
The printer driver dialog box appears.
4. Select the print settings you want to use as defaults for all of your Windows programs.
5. Click OK.
6. Close the printer properties dialog box.
(Start) > Control Panel > Hardware and Sound > Printers.
> Windows System > Control Panel. In the Hardware and Sound group, click View devices
Related Information
• Print from Your Computer (Windows)
• Print Settings (Windows)
71
Page 79
Home > Print > Print from Your Computer (Windows) > Print Settings (Windows)

Print Settings (Windows)

Basic Tab
1. Media Type
Select the type of media you want to use. To achieve the best print results, the machine automatically adjusts its print settings according to the selected media type.
Slow Drying Paper
Select this option if you use a type of plain paper on which ink dries slowly. This option may cause slight blurring of the text.
2. Print Quality
Select the print resolution you want. Because print quality and speed are related, the higher the quality, the longer it will take to print the document.
3. Paper Size
Select the size of the paper you want to use. You can either choose from standard paper sizes or create a custom paper size.
72
Page 80
Borderless
Select this option to print photos without borders. Because the image data is created slightly larger than the paper size you are using, this will cause some cropping of the photo edges.
You may not be able to select the Borderless option for some combinations of media type and quality, or from some applications.
4. Colour Mode
Select the colour mode to suit your preference.
5. Orientation
Select the orientation (portrait or landscape) of your printout.
If your application contains a similar setting, we recommend that you set the orientation using the application.
6. Copies
Type the number of copies (1-999) that you want to print in this field.
Collate
Select this option to print sets of multi-page documents in the original page order. When this option is selected, one complete copy of your document will print, and then reprint according to the number of copies you choose. If this option is not selected, then each page will print according to the number of copies chosen before the next page of the document is printed.
Reverse Order
Select this option to print your document in reverse order. The last page of your document will be printed first.
7. Multiple Page
Select this option to print multiple pages on a single sheet of paper, or print one page of your document on multiple sheets.
Page Order
Select the page order when printing multiple pages on a single sheet of paper.
Border Line
Select the type of border to use when printing multiple pages on a single sheet of paper.
8. 2-sided / Booklet
Select this option to print on both sides of the paper, or print a document in booklet format using 2-sided printing.
2-sided Settings button
Click this button to select the type of 2-sided binding. Four types of 2-sided bindings are available for each orientation.
73
Page 81
Advanced Tab
1. Colour / Greyscale
Select colour or greyscale printing. The print speed is faster in greyscale mode than it is in colour mode. If your document contains colour and you select greyscale mode, your document will be printed using 256 levels of greyscale.
2. Colour Enhancement
Select this option to use the Colour Enhancement feature. This feature analyses your image to improve its sharpness, white balance and colour density. This process may take several minutes depending on the image size and your computer's specifications.
3. Ink Save Mode
Select this option to print using lighter colours and emphasise image outlines. The amount of ink that is saved varies, depending on the type of documents printed. Ink Save Mode may make your printouts look different than they appear on your screen.
The Ink Save Mode feature is supported by technology from Reallusion, Inc.
4. Scaling
Select these options to enlarge or reduce the size of the pages in your document.
Fit to Paper Size
Select this option to enlarge or reduce the document pages to fit a specified paper size. When you select this option, select the paper size you want from the drop-down list.
74
Page 82
Free
Select this option to enlarge or reduce the document pages manually. When you select this option, type a value into the field.
5. Mirror Print
Select this option to reverse the printed image on the page horizontally from left to right.
6. Reverse Print
Select this option to rotate the printed image 180 degrees.
7. Use Watermark
Select this option to print a logo or text on your document as a watermark. Select one of the preset watermarks, add a new watermark, or use an image file you have created.
8. Header-Footer Print
Select this option to print the date, time and PC login user name on the document.
9. User Authentication
This feature allows you to confirm the restrictions for each user.
10. Other Print Options button
Change Data Transfer Mode
Select the print data transfer mode to improve print quality or print speed.
Advanced Colour Settings
Select the method that the machine uses to arrange dots to express halftones.
The printout colour can be adjusted to achieve the closest match to what appears on your computer screen.
Reduce Smudge
Some types of print media may need more drying time. Change this option if you have problems with smudged printouts or paper jams.
Retrieve Printer's Colour Data
Select this option to optimise the print quality using the machine's factory settings, which are set specifically for your Brother machine. Use this option when you have replaced the machine or changed the machine's network address.
Print Archive
Select this option to save the print data as a PDF file to your computer.
Related Information
• Print from Your Computer (Windows)
• Error and Maintenance Messages
• Paper Handling and Printing Problems
• Print a Photo (Windows)
• Print a Document (Windows)
• Print More Than One Page on a Single Sheet of Paper (N in 1) (Windows)
• Print as a Poster (Windows)
• Print on Both Sides of the Paper Automatically (Automatic 2-sided Printing) (Windows)
• Print as a Booklet Automatically (Windows)
• Use a Preset Print Profile (Windows)
• Change the Default Print Settings (Windows)
• Change the Print Setting Options When Having Printing Problems
75
Page 83
Home > Print > Print from Your Computer (Mac)

Print from Your Computer (Mac)

• Print a Photo (Mac)
• Print a Document (Mac)
• Print on Both Sides of the Paper Automatically (Automatic 2-sided Printing) (Mac)
• Print More Than One Page on a Single Sheet of Paper (N in 1) (Mac)
• Print a Colour Document in Greyscale (Mac)
• Prevent Smudged Printouts and Paper Jams (Mac)
• Print Options (Mac)
76
Page 84
Home > Print > Print from Your Computer (Mac) > Print a Photo (Mac)

Print a Photo (Mac)

1. Make sure you have loaded the correct media in the paper tray.
IMPORTANT
• For best results, use Brother paper.
• When you print on Brother photo paper, load one extra sheet of the same photo paper in the paper tray.
2. From an application, such as Apple Preview, click the File menu, and then select Print.
3. Select Brother MFC-XXXX (where XXXX is your model name).
For more page setup options, click the Show Details button.
4. Click the Paper Size pop-up menu, and then select your paper size.
To print photographs without margins, select a borderless paper size option.
5. Click the Orientation button that matches the way you want the photo to print.
6. Click the application pop-up menu, and then select Print Settings.
The Print Settings options appear.
7. Click the Media Type pop-up menu, and then select the media type you want to use.
IMPORTANT
To get the best print quality for the settings you have selected, always set the Media Type option to match the type of paper you load.
8. Change other printer settings, if needed.
9. Click Print.
Related Information
• Print from Your Computer (Mac)
• Paper Handling and Printing Problems
• Print Options (Mac)
77
Page 85
Home > Print > Print from Your Computer (Mac) > Print a Document (Mac)

Print a Document (Mac)

1. Make sure you have loaded the correct size paper in the paper tray.
2. From an application, such as Apple TextEdit, click the File menu, and then select Print.
3. Select Brother MFC-XXXX (where XXXX is your model name).
For more page setup options, click the Show Details button.
4. Click the Paper Size pop-up menu, and then select your paper size.
5. Select the Orientation option that matches the way you want the document to print.
6. Click the application pop-up menu, and then select Print Settings.
The Print Settings options appear.
7. Click the Media Type pop-up menu, and then select the media type you want to use.
IMPORTANT
To get the best print quality for the settings you have selected, always set the Media Type option to match the type of paper you load.
8. Change other printer settings, if needed.
9. Click Print.
Related Information
• Print from Your Computer (Mac)
• Check the Ink Volume (Page Gauge)
• Print Options (Mac)
78
Page 86
Home > Print > Print from Your Computer (Mac) > Print on Both Sides of the Paper Automatically
(Automatic 2-sided Printing) (Mac)

Print on Both Sides of the Paper Automatically (Automatic 2-sided Printing) (Mac)

1. From an application, such as Apple TextEdit, click the File menu, and then select Print.
2. Select Brother MFC-XXXX (where XXXX is your model name).
For more page setup options, click the Show Details button.
3. Select the Orientation option that matches the way you want the document to print.
4. Click the application pop-up menu, and then select Layout.
The Layout setting options appear.
5. In the Two-Sided section, select the Short-Edge binding or Long-Edge binding option.
6. Change other printer settings, if needed.
The Borderless feature is not available when using this option.
7. Click Print.
Related Information
• Print from Your Computer (Mac)
• Print Options (Mac)
79
Page 87
Home > Print > Print from Your Computer (Mac) > Print More Than One Page on a Single Sheet of Paper
(N in 1) (Mac)

Print More Than One Page on a Single Sheet of Paper (N in 1) (Mac)

1. From an application, such as Apple TextEdit, click the File menu, and then select Print.
2. Select Brother MFC-XXXX (where XXXX is your model name).
For more page setup options, click the Show Details button.
3. Click the application pop-up menu, and then select Layout.
The Layout setting options appear.
4. Click the Pages per Sheet pop-up menu, and then select the number of pages to print on each sheet.
5. Select the Layout Direction option.
6. Click the Border pop-up menu, and then select your border line type.
7. Change other printer settings, if needed.
8. Click Print.
Related Information
• Print from Your Computer (Mac)
• Print Options (Mac)
80
Page 88
Home > Print > Print from Your Computer (Mac) > Print a Colour Document in Greyscale (Mac)

Print a Colour Document in Greyscale (Mac)

Greyscale mode makes the print processing speed faster than colour mode. If your document contains colour, selecting Greyscale mode prints your document in 256 levels of greyscale.
1. From an application, such as Apple TextEdit, click the
2. Select Brother MFC-XXXX (where XXXX is your model name).
For more page setup options, click the Show Details button.
3. Click the application pop-up menu, and then select Print Settings.
The Print Settings options appear.
4. Click the Color / Grayscale pop-up menu, and then select the Grayscale option.
5. Change other printer settings, if needed.
6. Click Print.
File menu, and then select Print.
Related Information
• Print from Your Computer (Mac)
81
Page 89
Home > Print > Print from Your Computer (Mac) > Prevent Smudged Printouts and Paper Jams (Mac)

Prevent Smudged Printouts and Paper Jams (Mac)

Some types of print media may need more drying time. Change the Reduce Smudge option if you have problems with smudged printouts or paper jams.
1. From an application, such as Apple TextEdit, click the File menu, and then select Print.
2. Select Brother MFC-XXXX (where XXXX is your model name).
For more page setup options, click the Show Details button.
3. Click the application pop-up menu, and then select Print Settings.
The Print Settings options appear.
4. Click the Advanced print settings list.
5. Click the Reduce Smudge menu.
6. Select one of the following options:
Media Type
Plain Paper 2-sided Printing or
7. Change other printer settings, if needed.
8. Click Print.
Option Description
Off Select this mode to print at
Simplex Printing
Low Select this mode to print at
High Select this mode to print at
Related Information
• Print from Your Computer (Mac)
• Paper Handling and Printing Problems
• Change the Print Setting Options When Having Printing Problems
normal speed, using a normal amount of ink.
a slower speed, using a normal amount of ink.
the same speed as Low, but using less ink.
82
Page 90
Home > Print > Print from Your Computer (Mac) > Print Options (Mac)

Print Options (Mac)

Page Setup
1. Paper Size
Select the size of the paper you want to use. You can either choose from standard paper sizes or create a custom paper size.
2. Orientation
Select the orientation (portrait or landscape) of your printout.
If your application contains a similar setting, we recommend that you set the orientation using the application.
3. Scale
Type a value into the field to enlarge or reduce the pages in your document to fit the selected paper size.
83
Page 91
Layout
1. Pages per Sheet
Select the number of pages to print on a single sheet of paper.
2. Layout Direction
Select the page order when printing multiple pages on a single sheet of paper.
3. Border
Select the type of border to use when printing multiple pages on a single sheet of paper.
4. Two-Sided
Select whether to print on both sides of the paper.
5. Reverse page orientation
Select this option to rotate the printed image 180 degrees.
6. Flip horizontally
Select this option to reverse the printed image on the page horizontally from left to right.
84
Page 92
Paper Handling
1. Collate pages
Select this option to print sets of multi-page documents in the original page order. When this option is selected, one complete copy of your document will print, and then reprint according to the number of copies you choose. If this option is not selected, then each page will print according to the number of copies chosen before the next page of the document is printed.
2. Pages to Print
Select which pages you want to print (even pages or odd pages).
3. Page Order
Select the page order.
4. Scale to fit paper size
Select this option to enlarge or reduce the pages in your document to fit the selected paper size.
5. Destination Paper Size
Select the paper size to print on.
6. Scale down only
Select this option if you want to reduce the pages in your document when they are too large for the selected paper size. If this option is selected and the document is formatted for a paper size that is smaller than the paper size you are using, the document will be printed at its original size.
85
Page 93
Print Settings
1. Media Type
Select the type of media you want to use. To achieve the best print results, the machine automatically adjusts its print settings according to the selected media type.
2. Slow Drying Paper
Select this option if you use a type of plain paper on which ink dries slowly. This option may cause slight blurring of the text.
3. Print Quality
Select the print resolution you want. Because print quality and speed are related, the higher the quality, the longer it will take to print the document.
4. Color / Grayscale
Select colour or greyscale printing. The print speed is faster in greyscale mode than it is in colour mode. If your document contains colour and you select greyscale mode, your document will be printed using 256 levels of greyscale.
5. Advanced
Change Data Transfer Mode
Select the print data transfer mode to improve print quality or print speed.
Reduce Smudge
Some types of print media may need more drying time. Change this option if you have problems with smudged printouts or paper jams.
Other Print Options
Paper Thickness
Select the appropriate paper thickness.
Bi-Directional Printing
Select this option to increase the print speed. When this option is selected, the print head prints in both directions. When this option is cleared, the print head prints in only one direction, resulting in higher quality printouts but causing slower print speeds.
86
Page 94
Sometimes, the movement of the print head may vary due to environmental conditions. This may be seen when you print vertical lines and they do not align. If you encounter this problem, turn off the Bi­Directional Printing feature.
Color Settings
1. Color Mode
Select the colour mode to suit your preference.
2. Advanced Color Settings
Click the disclosure triangle to view the Advanced Colour Settings. Select the Colour Enhancement check box, and then set the options using the sliders. This process may take several minutes depending on the size of the image and the specifications of your computer.
Related Information
• Print from Your Computer (Mac)
• Error and Maintenance Messages
• Paper Handling and Printing Problems
• Print a Photo (Mac)
• Print a Document (Mac)
• Print on Both Sides of the Paper Automatically (Automatic 2-sided Printing) (Mac)
• Print More Than One Page on a Single Sheet of Paper (N in 1) (Mac)
87
Page 95
• Change the Print Setting Options When Having Printing Problems
88
Page 96
Home > Scan

Scan

• Scan Using the Scan Button on Your Brother Machine
• Scan from Your Computer (Windows)
• Scan from Your Computer (Mac)
• Configure Scan Settings Using Web Based Management
89
Page 97
Home > Scan > Scan Using the Scan Button on Your Brother Machine

Scan Using the Scan Button on Your Brother Machine

• Scan Photos and Graphics
• Save Scanned Data to a Folder as a PDF File
• Save Scanned Data to a Memory Card or USB Flash Drive
• Scan Multiple Business Cards and Photos (Auto Crop)
• Scan to an Editable Text File Using OCR
• Scan to Email Attachment
• Scan to FTP
• Scan to SSH FTP (SFTP)
• Scan to Network (Windows)
• Scan to SharePoint
• Web Services for Scanning on Your Network (Windows 7, Windows 8 and Windows 10)
• Change Scan Button Settings from ControlCenter4 (Windows)
• Change Scan Button Settings from Brother iPrint&Scan (Mac)
90
Page 98
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan Photos and Graphics

Scan Photos and Graphics

Send scanned photos or graphics directly to your computer.
Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent changes, use either ControlCenter4 (Windows) or Brother iPrint&Scan (Mac) software.
1. Load your document.
2. Press [Scan] > [to PC] > [to Image].
3. If the machine is connected over the network, press a or b to display the computer where you want to send data, and then press the computer name.
If the LCD prompts you to enter a PIN, use the LCD to enter the four-digit PIN for the computer, and then press [OK].
4. Do one of the following:
• To change the settings, press [Options] or [Set at Device].
• Press [Start] to start scanning without changing additional settings.
The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job.
To use the [Options] or [Set at Device] setting, a computer with either ControlCenter4 (Windows) or Brother iPrint&Scan (Mac) software installed must be connected to the machine.
5. Select the scan settings you want to change, and then press [OK].
Option Description
Scan Type
Resolution
File Type
Select the scan type for your document.
Select the scan resolution for your document.
Select the file format for your document.
Document Size
Brightness
Contrast
ADF Auto Deskew
(Available only for certain models)
Skip Blank Page
Select your document size.
Select the brightness level.
Select the contrast level.
Correct any skewed documents when they are scanned using the ADF.
When On is selected, blank pages are skipped.
91
Page 99
Option Description
Remove Background Colour
• To save the settings as a shortcut, press [Save as Shortcut]. You will be asked if you want to make this a One Touch Shortcut. Follow the LCD instructions.
6. Press [Start].
The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job.
Change the amount of background colour that is removed.
Related Information
• Scan Using the Scan Button on Your Brother Machine
92
Page 100
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Save Scanned Data to a Folder as
a PDF File

Save Scanned Data to a Folder as a PDF File

Scan documents and save them to a folder on your computer as PDF files.
Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent changes, use either ControlCenter4 (Windows) or Brother iPrint&Scan (Mac) software.
1. Load your document.
2. Press [Scan] > [to PC] > [to File].
3. If the machine is connected over the network, press a or b to display the computer where you want to send data, and then press the computer name.
If the LCD prompts you to enter a PIN, use the LCD to enter the four-digit PIN for the computer, and then press [OK].
4. Do one of the following:
• To change the settings, press [Options] or [Set at Device].
• Press [Start] to start scanning without changing additional settings.
The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job.
To use the [Options] or [Set at Device] setting, a computer with either ControlCenter4 (Windows) or Brother iPrint&Scan (Mac) software installed must be connected to the machine.
5. Select the scan settings you want to change, and then press [OK].
Option Description
Scan Type
Select the scan type for your document.
Resolution
File Type
Document Size
Brightness
Contrast
ADF Auto Deskew
(Available only for certain models)
Select the scan resolution for your document.
Select the file format for your document.
Select your document size.
Select the brightness level.
Select the contrast level.
Correct any skewed documents when they are scanned using the ADF.
93
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use