Brother BE-0901E User Manual

BBEESS--990011,,991166,,11221166,,11220011

For Technical Assistance Please Call Toll Free 1-877-4BROTHER

Rotary Hook

1) Turn the pulley in the opposite direction of the arrow to 50 degrees.

2) Open bobbin case cover and look from the left side of the rotary hook you will see what is called the “Raceway.”

3) Place a small drop of oil on the raceway (A).

4) Turn the pulley in the direction of the arrow to stop position (100 degrees).

Oil Reservoirs

1) Fill the oil reservoirs on the left side (B) of the machine sewing arm to 1/2 full once a week.

Needle Bars

1) Remove the front plate that has the “BROTHER” logo on it by removing one screw and loosening the other. The plate will now slide off to the side.

2) Oil each needle bar as shown in the picture on the left (C), by placing a small drop of oil on each needle bar. Be sure to oil in both locations of the needle bar.

: (Performed once at start of the day and every 4 hours of operation.)

: (Performed once a week based on 40 hours.)