939721
Merrimack, New Hampshire USA 03054 • 800-846-3000 • www.Brookstone.com
TABLE OF CONTENTS
Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Location of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Location of Controls and LCD Icons (Main Unit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Location of Controls (Remote Control) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Remote Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 -9
Operation (Main Unit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11
Changing LCD Brightness Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Operation (Using Mini Base) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15
CAUTION
• TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER.
THERE ARE NO SERVICEABLE PARTS INSIDE.
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
The lightning flash with arrow-head symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the unit’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the unit.
IMPORTANT SAFETY INSTRUCTIONS
All the safety and operating instructions should be read, adhered to and followed
before the unit is operated.
WARNINGS
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THE PRODUCT.
1. Check the household voltage to ensure it matches the unit's rated
specification before operating.
2. To reduce the risk of fire or electric shock, do not use this fan with any
solid-state speed-control device.
1
3 . Close supervision is necessary when the unit is used by or near children
or pets, or left unattended.
4. Do not allow children to play with any product packaging, such as plastic bags.
5. Do not operate the unit with a damaged cord or plug, after the product
malfunctions, or has been dropped or damaged in any way.
6. This product is intended for domestic use only and not for commercial,
industrial or outdoor use.
7. Always turn the unit off and unplug before moving its location.
8. To disconnect from the power supply, grip the power adaptor and pull from
the power socket. Never pull by the cord.
9. Do not operate the unit in areas where petrol, paint, or other flammable
liquids are used or stored.
10. Do not use the unit in artificially hot or humid conditions or allow it to be
used in any hazardous environment.
11. Do not place the unit near an open flame, cooking or heating appliance,
or hot surface.
12. This unit is not intended for use in wet or damp locations. Never locate the
unit in an area
13. Always use on a dry level surface.
14. Do not let the power cord hang over the edge of a table or counter.
Arrange the power cord away from an area where it may be tripped over.
15. Do not run the power cord under carpeting. Do not cover cord with throw rugs,
runners, or similar coverings. Arrange cord away from traffic area and where it
will not be tripped over.
where it may fall into a sink or other water container.
16. Do not place objects on the product or allow objects to obstruct the inlet
or outlet openings.
17. Do not operate in close proximity to walls or curtains, etc.
18. Do not attempt to repair the unit. To repair the unit, take it to a qualified
service engineer.
19. Do not operate any fan with a damaged cord or plug. Discard fan or return
to an authorized service facility for examination and/or repair.
20. Unplug unit when not in use.
21. Switch the product off and remove the plug from the power socket
before servicing.
22. Attention: To reduce the risk
plug (one blade is wider than the other). This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install the proper outlet. DO NOT
CHANGE THE PLUG IN ANY WAY.
23. This product employs overload protection (fuse). A blown fuse indicates
an overload or short-circuit situation. If the fuse blows, unplug the product
from the outlet. Replace the fuse as per the user servicing instructions on
page 11 (follow product marking for proper fuse rating) and check the product.
If the replacement fuse blows, a short-circuit may be present. Call Brookstone
Customer Service at 800-846-3000.
24. Risk of fire. Do not replace attachment plug as it contains a safety device
(fuse) that should not be bypassed. Discard product if the attachment plug
is damaged.
of electric shock, this product has a polarized
SAVE THESE INSTRUCTIONS
2 3
LOCATION OF PARTS AND CONTROLS
LOCATION OF CONTROLS AND LCD ICONS (MAIN UNIT)
1. Remote (not shown)
2. Fan x 3
3. LCD Panel
4. Control Panel
5. Power Cord with Fuse
(not shown)
6. Base
7. Mini Base with Cap x 2
8. Adapter for mini base x 2
1
2
CONTROL PANEL
1. Mode Button
2. Fan Speed Button
3. Oscillation Button
4. Timer Button
5. Power/LCD Brightness
Button
5
4
2
3
1
2 3
1
LCD SCREEN
8
7
5
6
4 5
3
4
1. Normal Mode Icon
2. Natural Wind Icon
3. Sleep Wind Icon
4. Fan Speeds Icon
5. Timer Icon
4
5
LOCATION OF CONTROLS (REMOTE CONTROL)
ASSEMB LY
1. Oscillation Button
2. Timer Button
3. Mode Button
4. Fan Speed Button
5. Power Button
1
2
5
4
3
REMOTE BATTERY INSTALLATION
1. Remove the battery compartment
holder from the back of the
Remote Control.
2. Insert the battery
(included, CR2025(3V)) into the
battery holder according to the
polarity indicators (”+” on top)
3. Close the battery holder cover.
6 7
ATTACHING BASE
1. Place the Base on the bottom of the
Fan Main Unit (see example at right).
2. Line-up the main unit with the base.
3. Insert and securely tighten the plastic nut (included).
I M PO RTANT:
Do not over tighten.
ASSEMBLY (CONTINUE)
ASSEMBLY (CONTINUE)
ATTACHING FANS
1. Place the fan on top of the main unit, rotate clockwise to lock
(see example at bottom).
2. Repeat step 1 to stack up to
three fans.
3. Angle of the each fan can be
adjusted.
4. Place the cap on the top of the fan
and rotate clockwise to lock.
8 9
USING THE FANS SEPERATELY
1. Place the fan on top of the mini base, rotate clockwise to lock
(see example at bottom).
2. Place the cap on top of the fan and rotate clockwise to lock.
OPERATION (MAIN UNIT)
POWER
1. Press the POWER button to turn the unit on and off.
OSCILLATION
1. Press the OSCILLATION button to activate the oscillation feature.
The fan will rotate left and right 45 degrees.
2. Press the OSCILLATION button again to deactivate the oscillation feature.
TIMER
1. Press the TIMER button to choose an auto-off time.
2. The timer can be set to run for 1 - 12 hours and automatically shut off.
3. The LCD will show the chosen auto-off time.
4. Press the TIMER button again to cancel the auto-off feature.
FAN SPEED
1. Press the FAN SPEED button to change the fan’s speed from Lo to
Hi (total 9 speeds)
NATURAL WIND AND SLEEP WIND MODE
NATURAL WIND: Chosen fan speed will run like a natural breeze.
SLEEP WIND:
1. Press the MODE button to activate the NATURAL WIND mode.
2. Press the MODE button again to activate the SLEEP WIND mode.
3. Press the MODE button again to activate the NATURAL AND SLEEP WIND mode.
4. Press the MODE button again turn off the mode.
Every 30 minutes the fan speed will reduce.
CHANGING LCD BRIGHTNESS SETTINGS
1. Press the POWER/LCD BRIGHTNESS button to turn the unit on.
2. Press and hold the POWER/LCD BRIGHTNESS button (on the main unit only)
for 2 seconds to automatically cycle through three brightness levels (High, Low,
and Off).
3. Release the POWER/LCD BRIGHTNESS button (on the main unit only)
to set the LCD brightness at desired level.
OPERATION (USING MINI BASE)
POWER AND SPEED
1. Press the POWER / SPEED button to turn the unit on (fan speed default on High).
2. Press the POWER / SPEED button to turn the unit to LO speed.
3. Press the POWER / SPEED button to turn the unit off.
10 11
CARE AND MAINTENANCE
1. Before you clean or replace the fuse, switch the product off and remove
the plug from the power socket.
2. Use a slightly damp cloth to clean the product housing.
3. Do not use detergents, abrasive cleaning liquids, or chemical agents
(alcohol, acetate, gasoline, etc) to clean the appliance.
4. Store in a dry, dust-free area with the cord wrapped loosely around the unit.
long period of time, remove the batteries from the remote control.
5. If storing
To replace the fuse in the plug:
1. Switch the product off and remove the plug from the power socket.
2. Access the plug’s spare fuse by sliding a small screwdriver (not included) under
the edge of the fuse cover on the plug. Carefully remove the fuse attached to
the cover by prying the metal ends with the screwdriver. Put the spare fuse
aside in a safe place.
2. To access and remove the spent fuse inside the plug, slide the tab on
the access panel inside the spare fuse cavity towards the plug prongs.
Remove the spent fuse with the screwdriver. Replace with the spare
2.5 Amp 125 Volt fuse, ensuring it is fully seated in the cavity by gently
pressing it in place on the metal ends with the screwdriver.
3. Slide the access panel over the fuse closed until it clicks, and replace
the spare fuse cover on the plug to lock it in place. Dispose of
spent fuse properly.
for a
the
SPECIFICATIONS
Voltage: .......................................120Vac/60Hz
Power: ........................................35W
Remote Range ................................ Approximately 45 Degrees
Remote Frequency .............................38KHz Infrared
Remote Power ................................. CR2025 (3V) Battery
Adapter: Input: 100-240V ~ 50/60Hz
Output: DC 15V 1A
10 Feet Away
12 13
ONE (1) YEAR LIMITED WARRANTY
Brookstone® warrants this product against defects in materials and/or workmanship
under normal use for a period of ONE (1) YEAR from the date of purchase by the
original purchaser (“Warranty Period”). If a defect arises and a valid claim is received
within the Warranty Period, at its option, Brookstone will either 1) repair the defect
at no charge, using new or refurbished replacement parts, or 2) replace the product
with a new product that is at least functional
3) provide a store credit in the amount of the purchase price of the original product.
A replacement product or part, including a user-installable part installed in accordance
with instructions provided by Brookstone, assumes the remaining warranty of the
original product. When a product or part is exchanged, any replacement item becomes
your property and the replaced item becomes Brookstone’s property. When a store
credit is given, the original pro
Brookstone’s property.
Obtaining Service: To o btain w a rranty service, call Brookstone Limite d Warranty S ervice a t
1-800-292-9819. Please be prepared to describe the product that needs service and
the nature of the problem. A purchase receipt is required. All repairs and replacements
must be authorized in advance. Service options, parts availability and response times
will vary. You are responsible for delivery and the cost of delivery of the
parts to the authorized service center for replacement, per our instructions.
Limits and Exclusions: Coverage under this Limited Warranty is limited to the Un
States of America, including the District of Columbia and the U.S. Territories of
Guam, Puerto Rico, and the U.S. Virgin Islands. This Limited Warranty applies only
to products manufactured for Brookstone that can be identified by the “Brookstone”
trademark, trade name, or logo affixed to them or their packaging. The Limited
Warranty
suppliers other than Brookstone may provide their own warranties to the purchas e r ,
does not apply to any non-Brookstone products. Manufacturers or
duct must be returned to Brookstone and becomes
ly equivalent to the original product, o r
product or any
ited
but Brookstone, in so far as permitted by law, provides these products “as is. ”
This warranty does not apply to: a) damage caused by failure to follow instructions
relating to product’s use or the installation of components; b) damage caused by
accident, abuse, misuse, fire, floods, earthquake or other external causes; c) damage
caused by service performed by anyone who is
d) accessories used in conjunction with a covered product; e) a product or part
that has been modified to alter functionality or capability; f) items intended to be
periodically replaced by the purchaser during the normal life of the product including,
without limitation, batteries or light bulbs; g) any product sold “as is” including, without
limitation, floor demonstration models and refurbished items; or h) a product that is
used commercially or for a commercial purpose.
BROOKSTO N E S HALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQ
DAMAGES R ESU LTI NG FROM THE USE OF THIS PRODUCT, OR ARISING
OUT OF ANY BREACH OF THIS WARRANTY. TO THE EXTENT PERMITTED BY
APPLICABLE LAW, B ROOKSTONE DISCLAIMS ANY AND ALL S TATUTO RY O R
IMPLIED WARRANTIES, INCLUDING, WITHOUT LI MITAT ION, WARRANTIES
OF MERCHANTA BILITY, FITNESS FOR A PARTICULAR PURPOSE AND
WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS. IF BROOKSTONE
CANNOT LAWFULLY DISCLAIM STATUTORY O R IMPLIE
TO THE EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE
LIMITED IN DURATION TO THE DURATION OF THIS EXPRESS WARRANTY.
Some states disallow the exclusion or limitation of incidental or consequential
damages or how long an implied warranty lasts, so the above exclusions or limitations
may not apply to you. This warranty gives you specific legal rights and you may also
have other rights, which vary from state to state.
not a representative of Brookstone;
UENTIAL
D WARRANTIES, THEN
14 15
Loading...