Page 1
10" Digital Picture Show
DIGITAL PICTURES—PLUS MUSIC AND VIDEOS
MY LIFE
Page 2
1
TABLE OF CONTENTS
Warnings and Cautions
……………………………………………
2-3
Accessories
…………………………………………………………
3
Location of Parts and Controls
………………………………………
4
Frame Operation
……………………………………………………
5
Frame Features
………………………………………………………
6
Optimizing Photo Storage Capacity
……………………………………
7
Installing Software on your Computer
…………………………………
7
Software Control Locations
……………………………………………
8
HOW TO Clock and Settings
………………………………………
9-10
HOW TO Photos
…………………………………………………
11-18
HOW TO Video
…………………………………………………
19-24
HOW TO Music
…………………………………………………
25-31
Screen Prompts
…………………………………………………
32-33
Specifications
………………………………………………………
34
Care and Maintenance
………………………………………………
34
Compatible File Formats
……………………………………………
34
Troubleshooting Guide
……………………………………………
35-38
Notes
……………………………………………………………
39-41
Warranty
……………………………………………………………
42
Page 3
2
IMPORTANT SAFETY INFORMATION
Please read all safety and operating instructions carefully before use and keep
these for future reference.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER.
THERE ARE NO SERVICEABLE PARTS INSIDE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
The lightning flash with arrow-head symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the unit’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the unit.
IMPORTANT SAFETY INSTRUCTIONS
All the safety and operating instructions should be read, adhered to and
followed before the unit is operated.
DANGER
To reduce the risk of electric shock, burns, fire or injury:
Always unplug the unit from the electrical outlet immediately after using.
Do not use while bathing or in a shower.
Do not place or store unit where it can fall or be pulled into a tub or sink.
Do not place in or drop into water or other liquid.
Do not reach for the unit if it has fallen into water. Unplug it immediately.
Care should be taken so that objects do not fall and liquids are not spilled
onto the unit.
•
•
1.
2.
3.
4.
5.
6.
RI SK O F EL ECT RI C SH OCK
DO N OT O PE N
Page 4
3
WARNING
Close supervision is necessary when this unit is used by or near children.
Use this unit only for its intended use as described in this manual.
Unplug this unit during lightning storms or when unused for long periods of time.
Never drop or insert an object into any opening.
Protect the power cord from being walked on or pinched, particularly at plug
outlets, convenience receptacles, and the point where it exits the unit.
Do not allow cord to touch hot surfaces. Wrap cord loosely around the unit
when storing.
The unit should be situated away from direct sunlight or heat sources, such as
radiators, electric heaters, heat registers, stoves, or other units (including amplifiers)
that produce heat. Avoid placing on top of stereo equipment that radiates heat.
Never block the air openings of the unit with materials such as clothing,
plastic bags or papers, or place it on a soft surface such as a bed or couch,
where the air openings may be blocked.
Do not overload electrical outlet. Use the power source as indicated.
Do not carry this unit by the cord or use the cord as a handle.
Never operate this unit if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or dropped into water. If the unit’s
power supply cord or plug is damaged, do not attempt to fix it yourself.
To avoid the risk of electric shock, do not disassemble or attempt to repair
the unit. Incorrect repair can cause risk of electric shock or injury to persons
when unit is used.
Do not operate in the presence of explosive and/or flammable fumes.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
ACCESSORIES
Adapter
Bonus Walnut Finish Frame
MediaImpression
TM
Software CD
1.
2.
3.
Page 5
4
LOCATION OF PARTS AND CONTROLS
Select
RotateDeleteCopy
ExitMenu
10
765
432
1
12
151413
2221201917 1816
8
11
9
Power
Power Save Light Sensor
Volume Down
Volume Up
Card Reader Slot
Flash Drive
USB In
DC In
Reset
Power On LED
Stand
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Speaker (2)
Menu
Select
Exit
Quick Access
Slide Show
Quick Access
Video
Quick Access
Music
Up, Down, Left, Right
Copy
Delete
Rotate
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
Page 6
FRAME OPERATION
ATTACHING THE STAND
Line up pins on stand with holes on the frame and insert stand.
Rotate stand to first position for landscape viewing (see A). Or, rotate stand to second
position (see B) and stand the frame upright for portrait viewing (see C).
TURNING THE FRAME ON/OFF
Plug in adapter.
Press and hold the POWER BUTTON
until the Brookstone
®
logo appears
on screen to turn on the frame (5-6 seconds). The Home Screen with memory
bar appears on the display after the frame is turned on. See below.
Note: A blue fill in the bar indicates used memory. When the bar is completely blue,
the memory is full.
Press and hold POWER BUTTON
for 2 to 3 seconds to turn off the frame.
The Brookstone
®
logo will appear on the screen as it is shutting down.
INSERTING A MEMORY CARD OR FLASH DRIVE
With the frame powered on, insert your memory card or flash drive into the appropriate
slot. The Home Screen will show for 60 seconds if no selection is made. After 60
seconds the media will auto-play.
Note: When a memory card is inserted into the frame, the frame’s internal memory
(media you have copied to the frame’s drive) will not be available.
USING THE VOLUME
Press VOLUME and VOLUME to adjust volume level. Volume graphic appears
on screen to show volume level.
A
CB
5
Page 7
FRAME FEATURES
PHOTO SMOOTH
The PHOTO SMOOTH feature modifies faces within your photos with a smoothing
airbrush effect. Feature only works in Slide Show mode (normal transition).
DYNAMIC LIGHTING
The DYNAMIC LIGHTING feature improves your photo’s light balance to enhance
dark photos. Feature only works in Slide Show mode (normal transition).
FACE ZOOM
The FACE ZOOM feature automatically pans and zooms to faces within your photos.
Feature only works in Slide Show mode (normal transition).
MULTI SHOW
The MULTI SHOW slide show transition will show multiple photos at the same time.
POWER SAVE
The POWER SAVE feature detects the room’s light level and automatically puts the
frame into energy saving mode by shutting down the LED display. If the frame senses
that the room is dark for more than 15 minutes and no buttons have been pressed,
the following graphic appears on screen.
When the frame senses light, or any button on the frame is pressed,
the LED display will turn on and the frame will resume current operation.
ANTI-VIRUS
When the frame is powered on, any files with the extension “.exe” or “.bat”
(common extensions for possible viruses) that have been put on the frame’s
drive via the computer will be automatically deleted from the frame.
RESET
Press the RESET button with a thin, pointed object (such as a paper clip).
Power the unit on after pressing the RESET button. The frame will default
to the factory settings, however, the frame’s internal memory will remain intact.
Note: Frame should not be used as a storage device.
6
Page 8
OPTIMIZING PHOTO STORAGE CAPACITY
When the photos are downloaded to the frame with either a memory card or
a flash drive, photos are automatically optimized for the frame’s screen resolution.
MediaImpressionTM SOFTWARE
When using your computer to download photos onto the frame, it is recommended
to use the included MediaImpression
™
software.
The MediaImpression
™
software optimizes your photos for the frame’s screen
resolution. (800 x 600 pixel dimensions, 72 dpi (pixels per inch)).
The MediaImpression
™
software will make new files of your photos when
it saves them to the frame. Your original photos will remain intact/unchanged.
Note: If your photo’s dimensions are smaller than 800 x 600, there is no need
t
o resize. To find out the dimensions of a photo, simply place your cursor over
t
he thumbnail while using the MediaImpression
™
software. This will show a
pop-up box with your photo's dimensions.
An example of the MediaImpression
™
screen is on the following page.
INSTALLING SOFTWARE ON YOUR COMPUTER
Photos placed on the frame using a computer and without using the MediaImpression™
software will not be optimized to your frame’s specifications and could possibly use
more memory than necessary.
FOR WINDOWS® 2000/XP/VISTA®/7:
Insert MediaImpression™ SOFTWARE CD into your computer’s CD-ROM drive.
Open the CD and double click Windows folder (this software does not auto-run).
Double click on the Setup.exe file.
InstallShield
®
Wizard will launch on your computer. Follow the InstallShield® Wizard
on-screen instructions to install the MediaImpression
™
software on your computer.
To open MediaImpression™, locate the installed software on your computer and
double click on the MediaImpression
™
icon.
FOR MAC® OS X 10.4 AND LATER:
Insert MediaImpression™ SOFTWARE CD into your computer’s CD-ROM drive.
Open the CD and double click on the Mac folder (this software does not auto-run).
Double click on “MediaImpression Installer".
Follow the MediaImpression
™
Installer on-screen instructions to install
the MediaImpression
™
software on your computer.
To open MediaImpression
™
, locate the installed software on your computer
and double click on the MediaImpression
™
icon.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
7
Page 9
Convert
Photo Edit
Locate
Photos
SOFTWARE CONTROL LOCATIONS
See detailed instructions on how to use the MediaImpression™ software on page 13.
8
Destination (Browse):
To choose destination
of converted files.
Choose the frame
drive to load files
onto the frame.
Resize:
Choose size.
Convert: To convert files to
correct format for frame.
Destination (Browse):
To choose destination of resized
files. Choose the frame drive to
load files onto the frame.
Page 10
9
Set the Time
and Date.
Press EXIT until you get to the Home Screen.
Press and to highlight
CLOCK & SETTINGS.
Press SELECT if no media is loaded
on the frame, or press MENU if media is loaded
on the frame.
“Set Time and Date” menu selection will appear.
Press SELECT. Clock and Calendar area becomes
active and Time is highlighted.
Press
or to select time.
Press
to highlight AM/PM.
Press
or to select AM or PM.
Press
to highlight Year.
Press
or to select Year.
Press
to highlight Day.
Press
or to select Day.
Press
to highlight Month.
Press
or to select Month.
Press EXIT to exit Time/Date
and save selections.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
CLOCK & SETTINGS
Select the
Brightness Level.
When in Clock mode press MENU.
Press
to go to the “Brightness Level”
menu selection.
Press
or to highlight choice.
Press SELECT to save choice. Selection
will appear in blue at the top of the list.
Press EXIT to exit menu.
1.
2.
3.
4.
5.
HOW TO… IT’S EASY!
I want to… Do thIs…
Page 11
10
Display Time and
Date in a Full Screen
Slide Show.
Press EXIT until you get to the Home Screen.
Press
and to highlight CLOCK & SETTINGS.
Press SELECT if no media is loaded on the frame,
or press MENU if media is loaded on the frame.
Press
to go to the “Time/Date Display”
menu selection.
Press
or to highlight “With Photo.”
Press SELECT to save choice. Selection will
appear in blue at the top of the list.
Press EXIT to exit menu. Display will show Time
and Date in a Full Screen Slide Show.
NOTE: Photos will be shown with Normal Slide Show
transition when in Clock mode.
1.
2.
3.
4.
5.
6.
7.
CLOCK & SETTINGS (continued)
Activate the Power
Save feature.
Display Time and
Date in a Multi Show.
Press EXIT until you get to the Home Screen.
Press
and to highlight CLOCK & SETTINGS.
Press SELECT if no media is loaded on the frame,
or press MENU if media is loaded on the frame.
Press to go to the “Time/Date Display”
menu selection.
Press
or to highlight “With Multi Show.”
Press SELECT to save choice. Selection will appear
in blue at the top of the list.
Press EXIT to exit menu. Display will show Time
and Date in a Multi Show.
Note: Photo features such as Photo Smooth, Face
Zoom and Dynamic Lighting are not available in
Clock mode.
1.
2.
3.
4.
5.
6.
7.
When in Clock mode press MENU.
Press
to go to the “Power Save” menu selection.
Press
or to highlight choice.
Press SELECT to save choice. Selection will
appear in blue at the top of the list.
Press EXIT to exit menu.
1.
2.
3.
4.
5.
I want to… Do thIs…
Page 12
View my photos
in Full Screen.
COPY SINGLE PHOTO
Insert your memory card or flash drive into the frame.
Press
or to highlight PHOTOS.
Press SELECT.
Select photo to copy in either Full Screen or
Thumbnail mode.
Press COPY.
Prompt will come on screen to confirm photo
to be copied.
Press COPY to confirm.
COPY ALL PHOTOS
Insert your memory card or flash drive into the frame.
Press
or to highlight PHOTOS.
Press SELECT.
When in either Full Screen or Thumbnail mode,
press and hold COPY button for 2 seconds.
Prompt will come on screen to confirm all photos
to be copied.
Press COPY to confirm.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
PHOTOS
11
Press EXIT until you get to the Home Screen.
Press
or to highlight PHOTOS.
Press SELECT. Unit will be in Thumbnail mode.
Search for photo and highlight selection by
pressing
, , or .
With chosen photo highlighted, press SELECT.
Press
and to scroll through photos
in Full Screen.
1.
2.
3.
4.
5.
6.
Press EXIT until you get to the Home Screen.
Press
and to highlight PHOTOS.
Press SELECT.
Press
, , or to scroll though photos
in Thumbnail mode.
1.
2.
3.
4.
I want to… Do thIs…
View my photos
in Thumbnail.
Q
UICK ACCESS
Copy my photos
onto the frame
from my memory
card or flash drive.
ADVANCED
Copy my photos onto the
frame from my memory
card or flash drive.
COPY SELECTED PHOTOS
Insert your memory card or flash drive into the frame.
Press
or to highlight PHOTOS.
1.
2.
Page 13
3. Press SELECT.
4. Press MENU.
5. Press
to go to the “Copy” menu selection.
6. Press
or to highlight “Select to Copy” and
then press SELECT.
7
. Search for photo by pressing
, , or .
8. Highlight your chosen photo and press SELECT.
9. A
graphic will appear in the lower right corner
of the photo to confirm it is to be copied.
1
0. Repeat steps 7 and 8 to select additional photos
to be copied.
1
1. After all photos to be copied are selected, press
MENU or EXIT. The “Copy” menu will highlight.
12. Press
or to highlight “Copy Selected.”
13. Press SELECT. After all photos are copied, the unit
will revert to Thumbnail mode.
HELPFUL HINTS: To deselect a photo that has been
selected to be copied, highlight the photo and press
SELECT. The
graphic will no longer be in the lower
right corner of the photo.
To select all photos on your media card or flash drive
to be copied while using the “Select to Copy” function,
press and hold SELECT for 2 seconds. The
graphic
will appear in lower right corner of every photo.
COPY ALL PHOTOS
Insert your memory card or flash drive into the frame.
Press
or to highlight PHOTOS.
Press SELECT.
Press MENU.
Press
to go to the “Copy” menu selection.
Press
or to highlight “Copy All.”
Press SELECT.
Prompt will come on screen to confirm all photos to
be copied. Press SELECT to confirm. After all photos
are copied, the unit will revert to Thumbnail mode.
1.
2.
3.
4.
5.
6.
7.
8.
ADVANCED
Copy my photos
onto the frame from
my memory card or
flash drive (continued).
PHOTOS (continued)
12
I want to… Do thIs…
Page 14
Copy my photos onto
the frame using my
computer. (See page 8
for MediaImpression
™
controls locations.)
PHOTOS (continued)
Ensure MediaImpression™ software (included) is
installed on your computer. See page 7 for
installation instructions.
Insert one end of a USB cable (not included) into the
USB In port on the unit and the other end of the cable
into your computer’s USB port. The frame display will
show “USB Connected” and an external “MyLifeFrame”
drive will appear on your computer.
Open MediaImpression
™
software.
Use “Folders” window to select location to find photos
to put on frame. Photos will appear as thumbnails.
Click on photos to be copied/resized or click on Select
All to select all photos.
Click on the Convert icon and select “Resize Photo”
from the drop-down menu.
A window will appear and prompt you to choose a
file size and a destination for copied/resized photos.
Choose “Classic Size” of 800 x 600.
Click on the Browse icon to choose the frame’s
external drive as the destination for the copied/
resized photos.
Click on “Resize.” Photos will be resized and saved
onto frame.
Disconnect the “MyLifeFrame” external drive from
the computer properly to avoid any loss of data.
HELPFUL HINTS: Use the Photo Edit feature to
rotate your photos.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Stop Slide Show.
Play Slide Show.
13
I want to… Do thIs…
Press . If you are in a menu selection
screen, press EXIT then
.
While Slide Show is playing, press
and the Slide
Show will stop and the unit will revert to Full Screen
mode. Or, press EXIT and the Slide Show will stop
and the unit will revert to Thumbnail mode.
Page 15
When in either Full Screen or Thumbnail mode,
press MENU.
“Slide Show Time” menu selection will appear.
Press
or to highlight choice.
Press SELECT to save choice. Selection will
appear in blue at the top of the list.
Press EXIT to exit menu.
1.
2.
3.
4.
5.
Select Slide
Show time.
PHOTOS (continued)
Select Slide
Show Transition.
Activate Face
Zoom Feature.
Select Slide Show
Photo Order.
14
I want to… Do thIs…
When in either Full Screen or Thumbnail mode,
press MENU.
Press
to go to the “Slide Show Transition”
menu selection.
Press
or to highlight choice.
Press SELECT to save choice. Selection
will appear in blue at the top of the list.
Press EXIT to exit menu.
1.
2.
3.
4.
5.
When in either Full Screen
or Thumbnail mode, press MENU.
Press
to go to the “Slide Show Photo Order”
menu selection.
Press
or to highlight choice.
Press SELECT to save choice. Selection
will appear in blue at the top of the list.
Press EXIT to exit menu.
1.
2.
3.
4.
5.
When in either Full Screen or Thumbnail mode,
press MENU.
Press
to go to the “Face Zoom” menu selection.
Press
or to highlight “On”.
Press SELECT to save choice. Selection will appear
in blue at the top of the list.
Press EXIT to exit menu.
1.
2.
3.
4.
5.
Page 16
When in either Full Screen or Thumbnail mode,
press MENU.
Press
to go to the “Dynamic Lighting”
menu selection.
Press
or to highlight “On”.
Press SELECT to save choice. Selection will
appear in blue at the top of the list.
Press EXIT to exit menu.
1.
2.
3.
4.
5.
Activate Dynamic
Lighting Feature.
PHOTOS (continued)
Arrange my photos
in a specific order
.
Rotate photo.
15
I want to… Do thIs…
When in Full Screen mode, press or to select
photo to rotate.
Press ROTATE. Photo will rotate 90 degrees.
Press ROTATE again to rotate photo another
90 degrees. Photo will be saved in rotated
position when in the internal memory only.
1.
2.
3.
The frame automatically arranges photos
by file name numerically, then alphabetically.
For example, a photo with the file name
“01.jpg” will come before a photo with the
file name “a.jpg.”
Using your computer, rename your photo files
numerically or alphabetically and copy the photos
onto the frame.
HELPFUL HINTS: If ordering photos numerically,
be sure to start with “01”, “02", etc... not “1”, “2”,
as “10” will come before “2.”
1.
2.
3.
Activate Photo
Smooth Feature.
When in either Full Screen or Thumbnail mode,
press MENU.
Press
to go to the “Photo Smooth” menu selection.
Press
or to highlight “On”.
Press SELECT to save choice. Selection will appear
in blue at the top of the list.
Press EXIT to exit menu.
1.
2.
3.
4.
5.
Page 17
QUICK ACCESS
Delete photos from
the frame.
16
DELETE SINGLE PHOTO
Remove your memory card or flash drive
from the frame.
Press
or to highlight PHOTOS.
Press SELECT.
Select photo to delete in either Full Screen
or Thumbnail mode.
Press DELETE.
Prompt will come on screen to confirm photo
to be deleted. Press DELETE to confirm.
DELETE ALL PHOTOS
Remove your memory card or flash drive
from the frame.
Press
or to highlight PHOTOS.
Press SELECT.
When in either Full Screen or Thumbnail mode, press
and hold DELETE button for 2 seconds.
Prompt will come on screen to confirm all photos to be
deleted. Press DELETE to confirm. After all photos are
deleted the unit will revert to the Home Screen.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
PHOTOS (continued)
I want to… Do thIs…
Page 18
17
DELETE SELECTED PHOTOS
Remove your memory card or flash drive from the frame.
Press
or to highlight PHOTOS.
Press SELECT.
Press MENU.
Press
to go to the “Delete” menu selection and then
press SELECT.
Press
or to highlight “Select to Delete.”
Search for photo and highlight selection by pressing
, , or .
With chosen photo to delete highlighted, press SELECT.
An
graphic will appear in the lower right corner of
the photo to confirm it is to be deleted. Repeat steps
7 and 8 to select additional photos to be deleted.
After all photos to be deleted are selected, press MENU
or EXIT. The “Delete” menu will highlight.
Press
or to highlight “Delete Selected” in menu.
Press SELECT. After photos are deleted, the unit will
revert to Thumbnail mode.
HELPFUL HINTS: To deselect a photo that has been
selected to be deleted, highlight the photo and press
SELECT. The
graphic will no longer be in the lower
right corner of the photo.
To select all photos on the frame to be deleted while
using the “Select to Delete” function, press and hold
SELECT for 2 seconds. The
graphic will appear
in the lower right corner of every photo.
DELETE ALL PHOTOS
Remove your memory card or flash drive from the frame.
Press
or to highlight PHOTOS.
Press SELECT.
Press MENU.
Press
to go to the “Delete” menu selection.
Press
or to highlight “Delete All.”
Press SELECT.
Prompt will come on screen to confirm all photos to
be deleted. Press SELECT to confirm. After all photos
are deleted the unit will revert to the Home Screen.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
1.
2.
3.
4.
5.
6.
7.
8.
ADVANCED
Delete photos
from the frame.
PHOTOS (continued)
I want to… Do thIs…
Page 19
Insert one end of a USB cable (not included) into the
USB In port on the unit and the other end of the cable
into your computer’s USB port. The display will show
“USB Connected” and an external “MyLifeFrame” will
appear on your computer.
Access the “MyLifeFrame” drive.
Select photos to be deleted and drag them to the trash,
or select and press delete.
Empty the trash.
Disconnect the “MyLifeFrame” external drive from the
computer properly to avoid any loss of data.
1.
2.
3.
4.
5.
Delete photos
from the
frame using
my computer.
PHOTOS (continued)
Convert my photo
files to JPEG.
Ensure MediaImpression™ software (included) is
installed on your computer. See page 7 for
installation instructions.
Open MediaImpression
™
software.
Use “Folders” window to select photos to convert
to JPEG. Photos will appear as thumbnails.
Click on photos to be converted or click on Select All
to select all photos.
Click on the Convert icon and select “Change File
Type” from the drop-down menu.
A window will appear and prompt you to choose the
“Convert To” file type and destination for converted
photos. Choose “JPEG” and click on the Browse icon
to choose the destination for the converted photos.
Click on “Convert.” Photos will be converted to JPEG.
Note: Converting photo files to JPEG will
leave them at their original size. To optimize
your photos for the frame’s screen resolution,
use
the MediaImpression
™
software to resize
your photos (see page 13).
1.
2.
3.
4.
5.
6.
7.
18
I want to… Do thIs…
Page 20
19
VIDEO
COPY SINGLE VIDEO
Insert your memory card or flash drive into the frame.
Press or to highlight VIDEOS.
Press SELECT.
Select video to copy in Thumbnail mode.
Press COPY.
Prompt will come on screen to confirm video to be
copied. Press COPY to confirm.
COPY ALL VIDEOS
Insert your memory card or flash drive into the frame.
Press or to highlight VIDEOS.
Press SELECT.
When in Thumbnail mode press and hold COPY button
for 2 seconds.
Prompt will come on screen to confirm all videos to
be copied. Press COPY to confirm.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
Play Videos.
View my videos
in Full Screen.
Stop Video.
View my videos
in Thumbnail.
Q
UICK ACCESS
Copy my videos onto
the frame from my
memory card or
flash drive.
I want to… Do thIs…
Press . If you are in a menu selection
screen, press EXIT and then
.
While video is playing, press
to stop the video,
or press EXIT to go to the Thumbnail screen.
Press EXIT until you get to the Home Screen.
Press
and to highlight VIDEOS.
Press SELECT. Unit will be in Thumbnail mode.
Search for video and highlight selection
by pressing
, , or .
With chosen video highlighted, press SELECT.
Video will start playing.
Press
and to scroll through videos
in Full Screen.
1.
2.
3.
4.
5.
6.
7.
Press EXIT until you get to the Home Screen.
Press
and to highlight VIDEOS.
Press SELECT.
Press
, , or to scroll through videos.
1.
2.
3.
4.
Page 21
VIDEO (continued)
COPY SELECTED VIDEOS
Insert your memory card or flash drive into the frame.
Press
or to highlight VIDEOS.
Press SELECT.
Press MENU.
Press
to go to the “Copy” menu selection.
Press
or to highlight “Select to Copy” and then
press SELECT.
Search for video and highlight selection by pressing
,
, or .
With chosen video to copy highlighted, press SELECT.
A
graphic will appear in the lower right corner of the
video to confirm it is to be copied. Repeat steps 7 and
8 to select additional videos to be copied.
After all videos to be copied are selected, press MENU
or EXIT. The “Copy” menu will highlight.
Press
or to highlight “Copy Selected.”
Press SELECT. After videos are copied, the unit will
revert to Thumbnail mode.
HELPFUL HINTS: To deselect a video that has been
selected to be copied, highlight the video and press
SELECT. The
graphic will no longer be in the lower
right corner of the video.
To select all videos on your media card or flash drive
to
be copied while using the “Select to Copy” function,
press and hold SELECT for 2 seconds. The
graphic
will appear in lower right corner of every video.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
ADVANCED
Copy my videos
onto the frame from
my memory card or
flash drive (continued).
20
I want to… Do thIs…
Page 22
21
VIDEO (continued)
Insert one end of a USB cable (not included) into
the USB In port on the unit and the other end of
the cable into your computer’s USB port. The frame
display will show “USB Connected” and an external
“MyLifeFrame” drive will appear on your computer.
Drag and drop video files from your computer
to the “MyLifeFrame” external drive.
Disconnect the “MyLifeFrame” external drive from
the computer properly to avoid any loss of data.
1.
2.
3.
Copy my videos onto
the frame using
my computer.
Select Video playback.
I want to… Do thIs…
When in either Full Screen
or Thumbnail mode, press MENU.
“Playback” menu selection will appear.
Press
or to highlight choice.
Press SELECT to save choice. Selection
will appear in blue at the top of the list.
Press EXIT to exit menu.
1.
2.
3.
4.
5.
COPY ALL VIDEOS
Insert your memory card or flash drive
into the frame.
Press
or to highlight VIDEOS.
Press SELECT.
When in either Full Screen or Thumbnail
mode, press MENU.
Press to go to the “Copy” menu selection.
Press or to highlight “Copy All.”
Press SELECT.
Prompt will come on screen to confirm all videos to
be copied. Press SELECT to confirm. After all videos
are copied, the unit will revert to Thumbnail mode.
1.
2.
3.
4.
5.
6.
7.
8.
ADVANCED
Copy my videos
onto the frame from
my memory card or
flash drive (continued).
Page 23
VIDEO (continued)
22
I want to… Do thIs…
QUICK ACCESS
Delete videos from
the frame.
DELETE SINGLE VIDEO
Remove your memory card or flash drive from
the frame.
Press or to highlight VIDEOS.
Press SELECT.
Select video to delete in Thumbnail mode.
Press DELETE.
Prompt will come on screen to confirm video
to be deleted. Press DELETE to confirm.
DELETE ALL VIDEOS
Remove your memory card or flash drive
from the frame.
Press or to highlight VIDEOS.
Press SELECT.
When in Thumbnail mode, press and hold DELETE
button for 2 seconds.
Prompt will come on screen to confirm all videos
to be deleted. Press DELETE to confirm. After all
videos are deleted the unit will revert to the
Home Screen.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
Arrange my videos
in a specific order.
The frame automatically arranges videos by file
name numerically, then alphabetically.
For example, a video with the file name “01.mpg” will
come before a video with the file name “a.mpg.”
Using your computer, rename your video files
numerically or alphabetically and copy the videos
onto the frame.
HELPFUL HINTS: If ordering videos
numerically, be sure to start with “01”, “02",
etc... not “1”, “2”, as “10” will come before “2.”
1.
2.
3.
Page 24
23
DELETE SELECTED VIDEOS
Remove the memory card or flash drive from
the frame.
Press or to highlight VIDEOS.
Press SELECT.
Press MENU.
Press
to go to the “Delete” menu selection.
Press or to highlight “Select to Delete” and
then press SELECT.
Search for video and highlight selection by pressing
, , or .
With chosen video to delete highlighted,
press SELECT.
An graphic will appear in the lower right corner of
the video to confirm it is to be deleted. Repeat steps
7 and 8 to select additional videos to be deleted.
After all videos to be deleted are selected, press
MENU or EXIT. The “Delete” menu will appear.
Presss or to highlight “Delete Selected.”
Press SELECT. After videos are deleted, the unit
will revert to Thumbnail mode.
HELPFUL HINTS: To deselect a video that has been
selected to be deleted, highlight the video and press
SELECT. The
graphic will no longer be in the lower
right corner of the video.
To select all videos on the frame to be deleted while
using the “Select to Delete” function, press and hold
SELECT for 2 seconds. The
graphic will appear
in the lower right corner of every video.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
ADVANCED
Delete videos from
the frame.
VIDEO (continued)
I want to… Do thIs…
Page 25
24
VIDEO (continued)
DELETE ALL VIDEOS
Remove the memory card or flash drive
from the frame.
Press or to highlight VIDEOS.
Press SELECT.
Press MENU.
Press
to go to the “Delete” menu selection.
Press
or to highlight “Delete All.”
Press SELECT.
Prompt will come on screen to confirm
all videos to be deleted. Press SELECT
to confirm. After all videos are deleted
the unit will revert to the Home Screen.
1.
2.
3.
4.
5.
6.
7.
8.
Delete videos
from the frame
(
ADVANCED continued).
Delete videos from
the frame using
my computer.
I want to… Do thIs…
Insert one end of a USB cable (not included)
into the USB In port on the unit and the other
end of the cable into your computer’s USB port.
The display will show “USB Connected” and
an external “MyLifeFrame” will appear on
your computer.
Access the “MyLifeFrame” drive.
Select videos to be deleted and drag them
to the trash or select and press delete.
Empty the trash.
Disconnect the “MyLifeFrame” external
drive from the computer properly to avoid
any loss of data.
1.
2.
3.
4.
5.
Page 26
25
MUSIC
Play Music.
Stop Music.
View my Music List.
Play music with
my Slide Show.
I want to… Do thIs…
Press . If you are in a menu selection screen,
press EXIT then
.
While music is playing, press
to stop music,
or EXIT to go to the music list.
Press EXIT until you get to the Home Screen.
Press
and to highlight MUSIC.
Press SELECT.
Press
and to scroll though songs.
With chosen song highlighted, press SELECT.
Song will start playing.
1.
2.
3.
4.
5.
6.
When in Music List mode press MENU.
Press
to go to the “Slide Show Music”
menu selection.
Press
and to highlight “On”.
Press SELECT to save choice. Selection
will appear in blue at the top of the list.
Press EXIT to exit Menu.
Press
.
Press the and buttons during
the Slide Show to change songs.
1.
2.
3.
4.
5.
6.
7.
Page 27
26
QUICK ACCESS
Copy my music onto
the frame from my
memory card or
flash drive.
COPY SINGLE SONG
Insert your memory card or flash drive
into the frame.
Press or to highlight MUSIC.
Press SELECT.
Select song to copy in Music List mode.
Press COPY.
Prompt will come on screen to confirm music
to be copied. Press COPY to confirm.
COPY ALL SONGS
Insert your memory card or flash drive
into the frame.
Press or to highlight MUSIC.
Press SELECT.
When in Music List mode, press and hold
COPY button for 2 seconds.
Prompt will come on screen to confirm all
songs to be copied. Press COPY to confirm.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
MUSIC (continued)
I want to… Do thIs…
Page 28
27
COPY SELECTED SONGS
Insert your memory card or flash drive into
the frame.
Press
or to highlight MUSIC.
Press SELECT.
Press MENU.
Press
to go to the “Copy” menu selection.
Press
or to highlight “Select to Copy”
and then press SELECT.
Search for song and highlight selection by pressing
, , or .
With chosen song to copy highlighted, press SELECT.
An
graphic will appear to the right of the song
name to confirm it is to be copied. Repeat steps
7 and 8 to select additional songs to be copied.
After all songs to be copied are selected, press
MENU or EXIT. The “Copy” menu will appear.
Press
or to highlight “Copy Selected.”
Press SELECT. After songs are copied,
the unit will revert to Music List mode.
HELPFUL HINTS: To deselect a song that has been
selected to be copied, highlight the song and press
SELECT. The
graphic will no longer be to the right
of the song name.
To select all songs on your media card or flash drive
t
o be copied while using the “Select to Copy” function,
press and hold SELECT for 2 seconds. The
graphic
will appear to the right of the song name of every song.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
ADVANCED
Copy my music onto
the frame from my
memory card
or flash drive.
MUSIC (continued)
I want to… Do thIs…
Page 29
28
MUSIC (continued)
COPY ALL SONGS
Insert your memory card or flash drive
into the frame.
Press
or to highlight MUSIC.
Press SELECT.
Press MENU.
Press
to go to the “Copy” menu selection.
Press
or to highlight “Copy All.”
Press SELECT.
Prompt will come on screen to confirm all songs to
be copied. Press SELECT to confirm. After all songs
are copied, the unit will revert to Music List mode.
1.
2.
3.
4.
5.
6.
7.
8.
Copy my music onto
the frame from my
memory card or flash drive
(ADVANCED continued).
I want to… Do thIs…
Copy my songs
onto the frame
using my computer.
Insert one end of a USB cable (not included) into
the USB In port on the unit and the other end of
the cable into your computer’s USB port.
The frame display will show “USB Connected”
and an external “MyLifeFrame” drive will appear
on your computer.
Drag and drop music files from your computer
to the “MyLifeFrame” external drive.
Disconnect the “MyLifeFrame” external drive from
the computer properly to avoid any loss of data.
1.
2.
3.
Page 30
29
QUICK ACCESS
Delete songs from
the frame.
DELETE SINGLE SONG
Remove your memory card or flash drive from
the frame.
Press or to highlight MUSIC.
Press SELECT.
Select song to delete in Music List mode.
Press DELETE.
Prompt will come on screen to confirm song to be
deleted. Press DELETE to confirm.
DELETE ALL SONGS
Remove your memory card or flash drive from
the frame.
When in Music List mode, press and hold DELETE
button for 2 seconds.
Prompt will come on screen to confirm all songs to be
deleted. Press DELETE to confirm. After all songs are
deleted, the unit will revert to the Home Screen.
1.
2.
3.
4.
5.
6.
1.
2.
3.
Arrange my songs
in a specific order.
The frame automatically arranges songs by file name
numerically, then alphabetically.
For example, a song with the file name “01.mp3” will
come before a song with the file name “a.mp3.”
Using your computer, rename your song files
numerically or alphabetically and copy the songs onto
the frame.
HELPFUL HINTS: If ordering songs numerically, be
sure to start with “01”, “02", etc... not “1”, “2”, as “10”
will come before “2.”
1.
2.
3.
Select music playback.
When in Music List mode, press MENU.
“Playback” menu selection will appear.
Press
or to highlight choice.
Press SELECT to save choice. Selection will appear
in blue at the top of the list.
Press EXIT to exit menu.
1.
2.
3.
4.
5.
MUSIC (continued)
I want to… Do thIs…
Page 31
30
MUSIC (continued)
DELETE SELECTED SONGS
Remove your memory card or flash drive from
the frame.
Press or to highlight MUSIC.
Press SELECT.
Press MENU.
Press
to go to the “Delete” menu selection.
Press
or to highlight “Select to Delete” and
then press SELECT.
Search for song and highlight selection by pressing
, , or .
With chosen song to delete highlighted, press SELECT.
An
graphic will appear to the right of the song
name to confirm it is to be deleted. Repeat steps
7 and 8 to select additional songs to be deleted.
After all songs to be deleted are selected, press
MENU or EXIT. The “Delete” menu will highlight.
Press
or to highlight “Delete Selected.”
Press SELECT. After songs are deleted,
the unit will revert to Music List mode.
HELPFUL HINTS: To deselect a song that has been
selected to be deleted, highlight the song and press
SELECT. The
graphic will no longer be to the right
of the song name.
To select all songs on the frame to be deleted while
using the “Select to Delete” function, press and hold
SELECT for 2 seconds. The
graphic will appear
to the right of the song name of every song.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
ADVANCED
Delete songs
from the frame.
I want to… Do thIs…
Page 32
MUSIC (continued)
Insert one end of a USB cable (not included) into the
USB In port on the unit and the other end of the cable
into your computer’s USB port. The display will show
“USB Connected” and an external “MyLifeFrame” drive
will appear on your computer.
Access the “MyLifeFrame” drive.
Select songs to be deleted and drag them to the trash
or select and press delete.
Empty the trash.
Disconnect the “MyLifeFrame” external drive from
the computer properly to avoid any loss of data.
1.
2.
3.
4.
5.
Delete songs
from the frame
(
ADVANCED continued).
Delete songs from
the frame using
my computer.
I want to… Do thIs…
DELETE ALL SONGS
Remove the memory card or flash drive from
the frame.
Press or to highlight MUSIC.
Press SELECT.
Press MENU.
Press
to go to the “Delete” menu selection.
Press
or to highlight “Delete All.”
Press SELECT.
Prompt will come on screen to confirm all songs to
be deleted. Press SELECT to confirm. After all songs
are deleted, the unit will revert to the Home Screen.
1.
2.
3.
4.
5.
6.
7.
8.
31
Page 33
IF you see… It means…
The media inserted into the
frame is either incompatible
with the frame or is corrupt.
The file is incompatible
with the frame.
The media inserted into the frame
contains no files or contains files that
are incompatible with the frame.
The photo is either incompatible
with the frame or is corrupt.
Screen Prompts are messages you may see on the frame’s screen. The following
are examples of what you might see, with a brief explanation.
The Copy button has been
pressed when there is no
media inserted in the frame.
A button has been pressed
for a function that is not available
in the frame’s current state.
SCREEN PROMPTS
32
Page 34
SCREEN PROMPTS (continued)
The frame’s internal memory is full.
Files cannot be copied to the frame
until some files are deleted.
The Quick Access Slide Show
button has been pressed and
there are no photo files on the
frame or on the media inserted
into the frame.
The Quick Access Music button
has been pressed and there are
no music files on the frame or on
the media inserted into the frame.
The Quick Access Video button
has been pressed and there are
no video files on the frame or on
the media inserted into the frame.
IF you see… It means…
33
Page 35
SPECIFICATIONS
Key Features: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10" TFT LCD Screen,
512MB Internal Memory,
USB Mass Storage,
800 x 600 Screen Resolution
Compatible Memory Cards*:
. . . . . . . . . . . . . . . . . . SD® and Mini SDTM (Secure DigitalTM),
MMC
®
(MultiMedia Card), MS, MS
PRO, MS Duo (with adapter), MS PRO
Duo (with adapter) (Memory Stick
®
)
Power Supply:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC Adapter (included)
Compatible Software:
. . . . . . . . . . . . . . . . . . . . . . . . Windows® 2000/XP/Vista®/7,
Mac
®
OS X 10.4 and later
*Cards must have a minimum of 64MB.
CARE AND MAINTENANCE
Clean frame with a soft, dry, clean cloth.
If the LCD screen needs additional cleaning, power off and unplug frame and
clean LCD screen with a soft, clean cloth and an LCD screen cleaning solution.
COMPATIBLE FILE FORMATS
PHOTO
JPEG
VIDEO
AVI (MPEG 1/2/4, MJPEG)
MPG (MPEG 1, MPEG 2)
MP4 (MPEG 4)
MOV (MJPEG)
Video audio compatibility: AAC or MP3
MUSIC
MP3
1.
2.
•
•
•
•
•
•
Windows and Vista are registered trademarks of Microsoft Corporation.
Mac is a registered trademark of Apple, Inc. SD is a trademark of Toshiba Corporation.
MMC is a trademark of MultiMedia Card Associates. Memory Stick is a registered
trademark of Sony Corporation. ArcSoft MediaImpression is a trademark of ArcSoft, Inc.
34 35
Page 36
TROUBLESHOOTING GUIDE
Frame does
not power on.
The adapter is
not inserted correctly.
Power outlet does
not have power.
Ensure adapter is
connected correctly.
Relocate to a power
outlet that has power.
prob lem possI ble caus e actIon
Some of my photos
are not showing on
the frame.
Photos are not in
JPEG format.
Use MediaImpression
™
software to convert your
photos to JPEG. See
page 13 for instructions.
File does not
download, the
file is distorted, the
unit freezes or the
file will not copy to
the frame.
Photo file is a
scanned image.
Scanned images can
be very large. Some may
be too large for the
frame to handle.
Internal memory
is full.
Files will not download
when memory is full.
Delete files from the frame
before downloading.
File is very large. Files above 2.0 megapixels
take longer to download.
Frame does
not read
memory card.
Ensure the memory card
is compatible with the
frame. See page 34.
Using a memory card
that is not compatible
with the frame.
Use a 64MB or
higher card.
Card is below 64MB.
Remove and reinsert
card and adapter to
ensure proper contact
in card reader.
All cards are inserted
with the label-side up.
Using a Memory Stick
®
Duo adapter.
Memory card is not
inserted correctly.
Page 37
36
TROUBLESHOOTING GUIDE (continued)
prob lem possI ble caus e actIon
Face Zoom, Photo
Smooth and Dynamic
Lighting features are
not working with certain
Slide Show transitions.
These features will only
run under the NORMAL
Slide Show transition.
Software limitation.
Face Zoom, Photo
Smooth and Dynamic
Lighting features are
not functioning on
certain faces.
These features may
not work due to photo
angle, distance in photo,
clothing, accessories etc.
Software limitation.
When photos, videos or
music are loading, the
display shows a blank
screen or screen graphics
for several seconds
before file is displayed.
Files are too large. Make sure photos are
optimized for frame.
Photos are taking
a long time to
load/slide show
times are inaccurate.
Photo Smooth, Dynamic
Lighting and Face Zoom
features are active.
Photo Smooth,
Dynamic Lighting
and Face Zoom features
increase load time.
Photos are not
optimized and photo
size is very large.
Make sure photos
are optimized for frame.
When selecting a photo
from THUMBNAIL to
show in FULL SCREEN,
“File not supported” or
“Photo Error” appears
on screen.
Photo data cannot be
viewed in this mode.
Photos not viewable
in this mode may be
removed by user.
Page 38
37
TROUBLESHOOTING GUIDE (continued)
prob lem
poss Ible cause actIon
Received an error that
my JPEG failed to resize
while resizing with the
MediaImpression
TM
software.
The frame’s internal
memory is full.
Remove files to free
up internal memory.
The frame is not
saving as many
photos on the
internal memory
as I expected.
JPEG files are large.
Remove files to free
up internal memory.
Use included
MediaImpression
™
software
to resize your JPEGS
(see page 13) or copy
your photos directly from
a media card or flash
drive to the frame.
Video and music
files are taking up
memory space.
The frame is
not reading my
flash drive.
Remove USB cable
from frame before
inserting your flash drive.
Make sure flash drive
connection is secure
USB cable is
inserted into the frame
but not hooked up to
the computer.
Flash drive connection
may be loose.
The frame drive is
not mounting on
my computer.
Flash drive is inserted
into the frame.
USB cable connections
may be loose.
Frame may not be
powered on.
Remove flash drive from
frame before connecting
to computer.
Make sure USB cable
connections are secure.
Make sure frame is
powered on.
Page 39
38
Media card or flash
drive is inserted into
the frame.
Rotated photos will not
be saved when viewing
photos on a media card
or flash drive. Only photos
on the internal memory
will be saved when they
are rotated.
My rotated photo
goes back to its
original orientation
when I exit out of
Photo Full Screen.
Music is not playing
with my Slide Show.
Slide Show Music
is not on.
There are no music
files on the internal
memory, media card
or flash drive.
Turn Slide Show Music
on (see page 25).
Make sure there are music
files on the internal memory,
media card or flash drive.
TROUBLESHOOTING GUIDE (continued)
prob lem
poss Ible cause actIon
My photos are not
playing in the order
I want them to play.
Files are not named
correctly for the frame
to order them.
The frame will order
files numerically, then
alphabetically. A common
mistake is to name the
files 1, 2, 3, 4, 5, 6, 7, 8,
9,10. In this case, “10”
would come after “1” and
before “2” because of the
“0”. The best way to order
them numerically is, “01”,
“02”, etc...
The frame does not
recognize folders when
ordering files.
Change the Slide Show
Photo Order to “Normal.”
See page 14.
My frame’s screen
is frozen and the
frame will not
perform functions.
Disconnect and reconnect
the adapter from the
frame. Press and hold
the power button for 3
seconds to turn the frame
on. The frame should
resume normal operation.
The Slide Show Order
is set to “Random.”
Files are in folders
on the frame drive.
Page 40
39
NOTES
Page 41
40
NOTES
Page 42
41
NOTES
Page 43
ONE (1) YEAR LIMITED WARRANTY
Brookstone warrants this product against defects in materials and/or workmanship under
normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser
(“Warranty Period”). If a defect arises and a valid claim is received within the Warranty Period,
at its option, Brookstone will either 1) repair the defect at no charge, using new or refurbished
replacement parts, or 2) replace the product with a new product that is at least functionally
equivalent to the original product, or 3) provide a store credit in the amount of the purchase
price of the original product. A replacement product or part, including a user-installable part
installed in accordance with instructions provided by Brookstone, assumes the remaining
warranty of the original product. When a product or part is exchanged, any replacement
item becomes your property and the replaced item becomes Brookstone’s property. When
a store credit is given, the original product must be returned to Brookstone and becomes
Brookstone’s property.
Obtaining Service: To obtain warranty service, call Brookstone Limited Warranty
Service at 1-800-292-9819. Please be prepared to describe the product that needs
service and the nature of the problem. A purchase receipt is required. All repairs and
replacements must be authorized in advance. Service options, parts availability
and response times will vary. You are responsible for delivery and the cost of delivery
of the product or any parts to the authorized service center for replacement, per
our instructions.
Limits and Exclusions: Coverage under this Limited Warranty is limited to the United States of
America, including the District of Columbia and the U.S. Territories of Guam, Puerto Rico, and
the U.S. Virgin Islands.
This Limited Warranty applies only to products manufactured for Brookstone that can be
identified by the “Brookstone” trademark, trade name, or logo affixed to them or their packaging.
The Limited Warranty does not apply to any non-Brookstone products. Manufacturers or
suppliers other than Brookstone may provide their own warranties to the purchaser, but
Brookstone, in so far as permitted by law, provides these products “as is.”
This warranty does not apply to: a) damage caused by failure to follow instructions relating to
product’s use or the installation of components; b) damage caused by accident, abuse, misuse,
fire, floods, earthquake or other external causes; c) damage caused by service performed by
anyone who is not a representative of Brookstone; d) accessories used in conjunction with a
covered product; e) a product or part that has been modified to alter functionality or capability;
f) items intended to be periodically replaced by the purchaser during the normal life of the
product including, without limitation, batteries or light bulbs; or g) any and all pre-existing
conditions that occur prior to the effective date of this Limited Warranty relating to any product
sold “as is” including, without limitation, floor demonstration models and refurbished items.
B
ROOKSTONE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY
BREACH OF THIS WARRANTY. TO THE EXTENT PERMITTED BY APPLICABLE LAW,
BROOKSTONE DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED WARRANTIES,
INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST HIDDEN OR LATENT
DEFECTS. IF BROOKSTONE CANNOT LAWFULLY DISCLAIM STATUTORY OR
IMPLIED WARRANTIES, THEN TO THE EXTENT PERMITTED BY LAW, ALL SUCH
WARRANTIES SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS
EXPRESS WARRANTY.
Some states disallow the exclusion or limitation of incidental or consequential damages or how
long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This
warranty gives you specific legal rights and you may also have other rights, which vary from
state to state.
42
Page 44
634592
Merrimack, New Hampshire USA 03054 • 800-846-3000 • www.Brookstone.com
Loading...