Broan AE110K Specifications
MODEL AE110K
SPECIFICATION SHEET
FLEX
DESCRIPTION
BLOWER:
• Plug-in, permanently lubricated motor - engineered for
continuous operation
• Dynamically balanced centrifugal blower wheel for quiet,
efficient performance
• Low RPM for quiet operation
HOUSING:
• Rugged, 26 gauge, galvanized steel construction
• Polymeric, 4” duct connector with tapered sleeve and no
metallic clatter
• 5-3/4” height allows for 2” x 6” ceiling installations
• Sturdy, easy, four-point mounting directly to joist
• Can be mounted in ceilings up to 7/12 pitch
• Can be installed in a wall if mounted 8-ft. or more above
the floor
GRILLE:
• Polymeric construction
• Innovative design - the result of extensive research with
designers and consumers
CONTROLS (Purchase separately):
• Refer to Broan’s catalog for a complete line of
accessories to effectively adapt these fans to your
construction requirements
U.L. Listed for use over bathtubs and showers when
connected to a GFCI protected branch circuit (ceiling
mount only)
U.L. Listed for use in insulated ceilings (TYPE I.C.)
3-Year Warranty
SERIES FAN
TM
TYPICAL SPECIFICATION
Fan shall be Broan Model AE110K.
Fan shall have corrosion resistant galvanized steel housing
with four-point mounting capability. It shall be ducted to a
roof or wall cap using 4” round ductwork.
Blower assembly shall be removable, have a centrifugaltype blower wheel and a permanently lubricated motor
designed for continuous operation.
Non-metallic damper/duct connector shall be included.
Air delivery shall be no less than the airflow values and
no greater than the sound level values listed in the HVI
Performance Specifications provided in this specification
(see following chart). All air and sound ratings shall be
certified by HVI.
Ceiling Ventilator shall be U.L. Listed for use in insulated
ceilings (Type I.C.) and for use over bathtubs and showers
when connected to a GFCI protected branch circuit.
Broan LLC Hartford, Wisconsin www.Broan-Nutone.com 888-558-1711
Venmar Ventilation ULC Drummondville (Quebec), Canada www.Broan.ca 877-896-1119
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
02C 1102372B
PERFORMANCE RATINGS
Model AE110
FLEXTM SERIES FAN
HVI PERFORMANCE
0.1 Ps - Static Pressure (in H2O) 0.25 Ps
Airflow
(CFM)
Sound
(Sones)
Power
(Watts)
Efficacy
(CFM / W)
110 1. 0 23.4 4.71 92
HVI-2100 CERTIFIED RATINGS comply with new
testing technologies and procedures prescribed
by the Home Ventilating Institute, for off-the-shelf
products, as they are available to consumers. Product
performance is rated at 0.1 in. static pressure, based
on tests conducted in a state-of-the-art test laboratory.
Sones are a measure of humanly-perceived loudness,
based on laboratory measurements.
ELECTRICAL & WEIGHT
Volts Hz Amps
120 60 0.3 10.0
Shipping
Weight
Airflow
(CFM
AIR FLOW PERFORMANCE
0.7
0.6
0.5
0.4
0.3
Static Pressure
O Inches of Water Gauge)
0.2
2
(in. H
0.1
0.0
0 10 20 30 40 50 60 70 80 90 100 110 120
Air Flow (CFM - Cubic Feet per Minute)
Dimensions are in inch.
Broan LLC Hartford, Wisconsin www.Broan-Nutone.com 888-558-1711
Venmar Ventilation ULC Drummondville (Québec), Canada www.Broan.ca 877-896-1119
Loading...