Broan 512M Specifications

MODEL 512M
THRU-THE-WALL
VENTILATOR

SPECIFICATION SHEET

Economy, versatility & performance in a thru-the­wall ventilator.

FEATURES

INTERIOR GRILLE:

White polymeric - complements any decor

•

Spin-on installation

•

MOTOR:

Plug-in, thermally protected, permanently lubricated

•

Quiet, durable polymeric blade

•

Motor assy. features fast, easy "twist-lock" installation

•

HOUSING:

Steel housing finished with electrically-bonded epoxy

•

paint
Can be installed in outside walls from 5¼" to 10" thick

•

(walls less than 6" thick will not use the 6" dia. flexible
duct)
Use with Model 57W or 57V Electronic Variable Speed

•

Control or wall switch

EXTERIOR WALL CAP:

Louvered white polymeric material

•

Intergral birdscreen

•

6" dia. flexible ducting included

•

SPECIFICATIONS

VOLTS AMPS RPM SONES CFM

120/127 .70 2600 3.5 70

TYPICAL SPECIFICATION

Ventilator shall be Broan Model 512M.

Unit shall be installed in an exterior wall - NOT through a fire­rated wall. Unit shall be controlled with a wall switch (speed
control).

Ventilator shall be steel housing finished with electrically­bonded epoxy paint.

Motor assembly shall be removable and permanently
lubricated. RPM not to exceed 2600.

Air delivery shall be no less than 70 CFM and sound level no
greater than 3.5 Sones. All air and sound ratings shall be
certified by HVI. Unit shall be U.L. listed.

HVI-2100 CERTIFIED RATINGS comply with new testing
technologies and procedures prescribed by the Home Ventilating
Institute, for off-the-shelf products, as they are available to consumers.
Product performance is rated at 0.1 in. static pressure, based on
tests conducted in AMCA’s state-of-the-art test laboratory. Sones
are a measure of humanly-perceived loudness, based on laboratory
measurements.

Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)

REFERENCE QTY. REMARKS Project

Location
Architect
Engineer
Contractor
Submitted by Date

50F 99042567C