Broan 462404, 462423, 463008, 463011, 463601 Specification Data

MODEL 46000
4-WAY
CONVERTIBLE
RANGE HOOD

SPECIFICATION SHEET

Deluxe features in our smaller shell - offers the
most hood for the money.

FEATURES

Infinite speed fan control

•

Polymeric blade and light lens (accepts up to 75W bulb)

•

Washable aluminum filter

•

Converts to non-ducted by removing cover plate from

•

control panel and installing the non-ducted filter (pur­chase separately)
Mitered sides and hemmed bottom for safety and good

•

looks
Damper/duct connector included

•

7" round plate included

•

Contemporary styling in White, Almond, Biscuit and

•

Stainless Steel
Available in 24", 30", 36" and 42" widths

•

Special Order Color - Black (24", 30" and 36" only)

•

SPECIFICATIONS

VOLTS AMPS CFM SONES DUCT

120 2.5 190 7.5 3¼" X 10" (H)
120 2.5 190 7.5 3¼" X 10" (V)
120 2.5 220 7.5 7" Round (V)
120 2.5 - - Non-Ducted

HVI-2100 CERTIFIED RATINGS comply with new
testing technologies and procedures prescribed by
the Home Ventilating Institute, for off-the-shelf products,
as they are available to consumers. Product
performance is rated at 0.1 in. static pressure, based
on tests conducted in AMCA’s state-of-the-art test
laboratory. Sones are a measure of humanly-perceived

loudness, based on laboratory measurements.

TYPICAL SPECIFICATION

Range hood shall be Broan Model 46000.
Unit shall be convertible between ducted (using a washable

aluminum filter) and non-ducted (using a Microtek® System II
filter).

Motor to be permanently lubricated. RPM not to exceed

3250.
Unit shall have infinite speed fan control with separate light/

night light switch.
Sides shall be mitered and bottom edge hemmed - with no

sharp edges.
Air delivery shall be no less than 190 CFM (3¼ x 10 dis-

charge) and 220 CFM (7" round discharge) and sound
levels no greater than 7.5 Sones. All air and sound ratings
shall be certified by HVI.

Unit shall be U.L. listed.

Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)

REFERENCE QTY. REMARKS Project

Location
Architect
Engineer
Contractor
Submitted by Date

10K 99044004A