Brita OB32-OB03, OB36-OB03, OB24-OB03, OB11-OB03, OB21-OB03 User Manual

...
5 (2)
PITCHER & DISPENSER
MIN
Water Filtration System
User’s Guide
www.brita.com
Your Brita® System
Thank you for choosing Brita®, the world’s #1 brand of household
1
water filtration.
®
The Brita into healthier, great-tasting drinking water. Just follow the easy instructions in this booklet to quickly get started using your Brita
To find out more about Brita, visit our website at www.brita.com. While you are there, sign up to receive special offers and healthy living tips.
Brita
patented and certified water filtration systems turn ordinary water
Brita® System Components
LID
FILTER
RESERVOIR
PITCHER OR
DISPENSER
®
pitcher/dispenser system.
Getting Started
2
Wash your hands with soap and water; then remove filter from filter bag.
1
NOTE: It is normal for a new filter to be wet when first opened. Filters are washed
during manufacturing to prevent them from drying out.
Soak filter upright in cold water for 15 minutes.
2
Hand-wash pitcher/dispenser, lid and reservoir with a mild
3
detergent. Do not use abrasive cleaners. Rinse well. TIP: Hand-wash pitcher/dispenser, lid and reservoir
periodically. Do not wash in dishwasher. For best results cleaning chrome pitcher lids, wipe with a soft sponge soaked in a solution of one teaspoon of vinegar in a cup of water.
Rinse filter under cold, running tap water for a few seconds.
4
Insert filter into reservoir by lining up groove in filter with notch
5
in reservoir. Press firmly to ensure a tight seal. Fill the reservoir with cold tap water.* Discard your first two pitchers of filtered water (or first dispenser), or use this water for plants. It is normal for carbon dust to appear in your first fillings.
The Brita® Filter
For best results when filling pitcher/dispenser reservoir, pour tap
3
water on the side of the reservoir rather than directly on top of the filter. Allow water to filter completely before pouring or refilling reservoir.
The Brita® Filtration System
Advanced Filtration
with Activated Carbon and Ion Exchange Resin
Reduces Contaminants: Lead* Copper Mercury Cadmium
Reduces Chlorine
(Taste and Odor)
For maximum efficiency, filter no more than 2 gallons (7.5 liters) daily.
Filter Change Indicator
Changing your filter regularly ensures that you have clear, refreshing,
4
healthier, great-tasting water. The Electronic Filter Change Indicator and Calendar Minder change indicator each time you replace your filter.
Electronic Filter Change Indicator (Smart Pitchers Only)
1 Press firmly and hold the start button down for 5 to 10 seconds.
2 As you hold down the button, 4 bars will appear in the display, one after the other. Do not release the start button until the 4 bars appear and start to flash. If you have difficulty pressing the start button, a capped ballpoint pen may be used to press the button down.
3 A small flashing dot in the lower right corner of the display shows the indicator is working.
4 Every 2 weeks a bar automatically disappears. When only 1 bar remains, make sure you have a new filter on hand.
5 After 2 months (when all bars have disappeared), an arrow will flash at the top of the display reminding you to change your filter. After changing your filter, reset your indicator by following the steps above.
The filter change indicator contains a non-replaceable sealed battery designed to last 5 years, depending on usage. After 5 years the pitcher is still functional, but the electronic filter change indicator will eventually stop working.
Calendar Minder
1 Insert a new filter.
2 Set filter indicator to closest date 2 months from now.
3 On the date indicated, remove your filter and repeat steps 1 and 2.
Any questions? Visit us at www.brita.com or call 800-24 BRITA (U.S.A.) 800-387-6940 (CANADA).
make it easy to know when 2 months* have passed. Reset your filter
(Pitchers with Calendar Minder™ Only)
Built-in Calendar Minder makes it easier to remember when to change your filter.
You may need to change your filter more or less often depending on the amount of water you consume.
*Filter should be replaced after 40 gallons/151 liters (about 2 months for the average family).
19315000.009
1
2
3
4
5
To register your system and to find more information on our other products, visit us at: www.brita.com
Remember…
Change your filter about every 2 months for healthier, great-tasting water!*
5
c
The Brita® Pitcher Filter is not intended to purify water. Do not use with water that is
microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Individuals requiring water of special microbiological purity should follow the advice of their doctor or local health officials regarding the use and consumption of their tap water and Brita
c
We recommend that you store your Brita® system in the refrigerator to get cold, great-
tasting water. If you would like to keep your Brita we recommend that you keep it in a cool area that is not in direct sunlight and replace any filtered water that has been left sitting for several days or more. This will help make sure you get refreshing, great-tasting Brita
c
It is important that the bottom of the filter be in contact with the filtered water to
prevent the filter from drying out. If the filter dries out, resoak for 15 minutes.
Brita® Water Filtration Pitchers/Dispensers
Classic – Model # OB01/OB03 UltraMax – Model # OB24/OB03 Deluxe – Model # OB26/OB03 Atlantis – Model # OB32/OB03 Grand – Model # OB36/OB03
Systems tested and certified by the WQA against NSF/ANSI Standards 42 and 53 for the reduction of the claims specified on the Performance Data Sheet.
You’ll be pleased to know that we offer a 30-day unconditional money-back guarantee! Thank you again for your trust in Brita.
Still have questions? Or to locate retailers: Visit www.brita.com or call U.S.A. 1-800-24-BRITA, CANADA 1-800-387-6940.
®
water.
®
system outside of the refrigerator,
®
water.
Slim – Model # OB11/OB03 Space Saver – Model # OB21/OB03 Riviera – Model # OB35/OB03 Aqualux – Model # OB37/OB03 Chrome – Model # OB39/OB03
Brita LP 1221 Broadway Oakland, CA 94612
Brita Canada Corporation 150 Biscayne Crescent Brampton (Ontario) L6W 4V3
Pacifica™ – Model # OB41/OB03 Cobalt – Model # OB42/OB03 Vintage – Model # OB43/OB03
* Filter should be replaced
after 40 gallons/151 liters (about 2 months for the average family).
For healthier, great-tasting water, replace your filter after 40 gallons/151 liters (about 2 months for the average family).
*Hot water should not be used with the Brita® Pitcher Filter (Max. 85°F/29°C – Min. 32°F/0°C).
PERFORMANCE DATA SHEET
IMPORTANT NOTICE: Read this Performance Data Sheet and compare the capabilities of this unit with your actual water treatment needs.
It is recommended that, before purchasing a water treatment unit, you have your water supply tested to determine your actual water treatment needs.
SUBSTANCE
NSF/ANSI Standard 53 – Health Effects
Lead†150 ppb 150±15 ppb 3.0 ppb 6.0 ppb 98% 96% 15 ppba/10 ppb 10 ppbb17 22 6.3
Lead†150 ppb 150±15 ppb 2.8 ppb 6.5 ppb 98% 95.7% 15 ppba/10 ppb 10 ppbb100 21 8.4
Copper 3.0 ppm 3.0±0.3 ppm 0.12 ppm 0.30 ppm 96% 90% 1.3 ppma≤1.0 ppmc23 23 6.7
Copper 3.2 ppm 3.0±0.3 ppm 0.62 ppm 0.83 ppm 80% 74% 1.3 ppma≤1.0 ppmc120 19 8.7
Mercury 6.0 ppb 6±0.6 ppb 0.2 ppb 0.2 ppb 96% 89% 2 ppb 1 ppbb15 21 6.6
Mercury 5.9 ppb 6±0.6 ppb 0.2 ppb 0.6 ppb 95% 93% 2 ppb 1 ppbb110 22 8.5
Cadmium 30 ppb 30±3 ppb 1.3 ppb 2.0 ppb 95% 93% 5 ppb 5 ppbb20 21 6.5
Cadmium 30 ppb 30±3 ppb 2.0 ppb 4.8 ppb 93% 84% 5 ppb 5 ppbb130 22 8.6
NSF/ANSI Standard 42 – Aesthetic Effects
Chlorine 2.0 ppm 2±0.2 ppm 0.07 ppm 0.12 ppm 96% 94% N. A./50%dN. A. N. A. 23 7.4
Zinc 10 ppm 10±1 ppm 3.4 ppm 4.4 ppm 66% 56% N. A./5 ppm 5.0 ppmc22 18 7.4
Based on independent laboratory testing.
These systems have been tested according to NSF/ANSI 42 and 53 for reduction of the substances listed. The concentration of each of the indicated substances in water entering the systems was reduced to a concentration less than or equal to the permissible limit for water leaving the systems, as specified in NSF/ANSI 42 and 53.
* The U.S. EPA Levels are Maximum Contaminant Levels (MCLs) and are the same as the NSF Maximum Permissible Product Water Concentrations
listed in NSF/ANSI Standards 42 and 53 unless noted otherwise.
a
U.S. EPA Action Level
b
Health Canada Maximum Acceptable Concentration (MAC). N.A. = Not applicable.
c
Health Canada Aesthetic Objective (AO).
Please refer elsewhere in this User’s Guide for the proper conditioning and use and care requirements. Maintenance according to the manufacturer’s instructions is essential for proper filter performance. Replace the Brita® Pitcher Filter every 40 gallons/151 liters (about 2 months for the average family). For maximum efficiency, process no more than 2 gallons/7.5 liters daily. Replacement filters (model OB03) generally cost $8.00 or less.
Testing was performed under standard laboratory conditions. The contaminants or other substances removed or reduced by this water treatment device are not necessarily in all users’ water. Filter performance may vary based on local water conditions.
The Brita® Pitcher Filter is not intended to purify water. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Individuals requiring water of special microbiological purity should follow the advice of their doctor or local health officials regarding the use and consumption of their tap water and Brita water.
Hot water should not be used with the Brita® Pitcher Filter (Max. 85°F/29°C – Min. 32°F/0°C).
Influent Challenge
Concentration
Actual NSF Target Average Maximum Average Minimum
REDUCTION
Filter Effluent Percent Reduction
d
NSF/ANSI Standard 42 reduction requirement.
U.S. EPA Level*/
NSF Maximum
Permissible Product Water Concentration
Health
Canada
Guideline
TESTING PARAMETERS
Alkalinity
Temp.
(ppm CaCO3)
pH
(°C)
*Based on independent laboratory testing.
The contaminants or other substances removed or reduced by this water treatment device may not be in all users’ water.
Loading...