Brinno TLC100 User Manual

TimeLapse

HD Video Camera

TLC 100

User Manual

www.brinno.com

1 -

Brinno TimeLapse Camera

Thank you for purchasing Brinno TimeLapse Camera!

Brinno TimeLapse Camera allows anyone to record the ins and outs of daily life, big

construction jobs, or small DIY projects…so you can see everything, and miss nothing!

Package Contents

• TimeLapse Camera

• User Manual

• 2GB USB Flash Drive

• 4 AA Batteries

• Setup Software

Minimum Requirements to install and run the software

Microsoft Windows 98, XP, Vista and Win 7

TimeLapse Camera Output le format

AVI format, resolution 1280x 1024.

Note: Tha maximum size of each single AVI file is 4096 frames.

Length of battery usage

Interval Capture Frames Battery Life

1 Minute

5 Minutes

30 Minutes

1 Hour

4 Hours

24 Hours

5 Seconds

15000

4000
2500
2000

800
200

28000

10.4 Days

13.8 Days
52 Days
83 Days

133 Days
200 Days
38 Hours

Brinno TimeLapse Camera

- 2

How to setup your TimeLapse Camera

1. Remove the TimeLapse Camera from the package.

2. Check to make sure that all the contents are included.

3. Open up the TimeLapse Camera by placing it Lens side down on a at surface, or Lens side down in the

palm of your hand, and remove the battery door by pulling open the latch.

4. Insert four AA batteries according to the polarity direction (+ -).

5. Insert any standard USB Flash Drive into the TimeLapse Camera in the open slot between the

batteries.

Front view

Power button

Back view

Lens

Macro Image

Standard Image

USB Flash drive

Battery cover

Wheel

AA battery

Mounting Hole

3 -

Brinno TimeLapse Camera

NOTE

• The maximum size USB ash drive that TimeLapse Camera can support is a 8GB USB Flash Drive. If you use a
USB ash drive with a larger memory density the camera will not function properly.

• Replace the battery door on the TimeLapse Camera. Make sure to push down the latch until you hear it “click”
to ensure the door is closed properly.

• With the wheel in the middle of the camera you can choose between one of seven time interval settings.
Simply rotate the wheel to choose the desired setting.

Custom Time Interval settings:

Wheel position

1
2
3
4
5
6
7

Time interval between pictures

1 minute

5 minutes

30 minutes

1 hour

4 hours

24 hours

Custom (factory setting = 5 seconds)

NOTE

• The wheel MUST point to number directly, otherwise TimeLapse Camera can not work!

• To modify the custom setting, insert the included USB Flash Drive into your computer, and follow the
instructions. See “Installing the Software”.

• The custom setting can range anywhere from 5 seconds to 12 hours.

Factory default custom setting is set to 5 seconds.

Mounting your TimeLapse Camera

To set your TimeLapse Camera on any standard

tripod, screw the tripod clockwise into the hole on

the bottom of the camera.

Mounting Hole