Page 1
the Re-Fresha™ Kit
Instruction Book - LAD100
Page 2
Contents
IMPORTANT
SAFEGUARDS
2 Breville Recommends Safety First
6 Components
7 Features
8 Functions
9 Care, Cleaning & Storage
BREVILLE
RECOMMENDS
SAFETY FIRST
At Breville we are very safety
conscious. We design and
manufacture consumer
products with the safety of you,
our valued customer, foremost
in mind. In addition, we ask that
you exercise a degree of care
and adhere to the following
precautions.
READ ALL
INSTRUCTIONS BEFORE
USE AND SAVE FOR
FUTURE REFERENCE
• Carefully read all instructions
before operating the mini
dehumidifier for the first time
and save for future reference.
• Remove and safely discard
any packaging material and
promotional labels before
using the mini dehumidifier
for the first time
• The mini dehumidifier is
intended for household use
only and not for commercial
or industrial use. Do not use
outdoors.
• Do not place the mini
dehumidifier drying base near
the edge of a bench or table
during operation. Ensure the
surface is level, clean and free
of water.
• To protect against electrical
hazards, do not immerse any
part of the mini dehumidifier
in water or other liquids.
• Always unplug the mini
dehumidifier drying base
when not in use.
2
Page 3
• Do not insert any foreign
objects through the openings
in any part of the mini
dehumidifier.
• Do not unplug the mini
dehumidifier drying base by
pulling on the cord.
• Do not operate the mini
dehumidifier with a damaged
cord or plug, or if the mini
dehumidifier has been
dropped or damaged in any
manner. Return the mini
dehumidifier to your nearest
Breville service centre for
examination, electrical or
mechanical adjustment or
repair.
• Do not place anything on top
of the drying base other than
the mini dehumidifier when
drying or when stored.
• Never block any openings in
the drying base or place the
drying base on a soft surface,
such as a bed or sofa when in
use.
• Do not attempt to open the
casing of either part of the
mini dehumidifier to repair
or adjust any functions. The
inside of the unit contains
no consumer serviceable
parts. All servicing should
be performed by qualified
personnel only.
• Keep the mini dehumidifier
clean and check openings
from time to time for
accumulated dust. Follow
the cleaning instructions
provided in this book.
• The mini dehumidifier
contains small parts (silica
beads) which may present
a choking hazard to small
children. If ingested, seek
medical advice immediately.
• Only dry the mini
dehumidifier using the drying
base provided. Never attempt
to dry by any other method.
• Do not drop either part of the
mini dehumidifier.
• Do not cover the mini
dehumidifier while the drying
base is powered on and
drying the mini dehumidifier.
• Keep the mini dehumidifier
at least 10cm away from other
objects while the drying base
is powered on and drying to
increase air flow and avoid
overheating.
• Avoid touching the mini
dehumidifier while it is
connected to the drying base
and powered on as some parts
may be hot. Always allow
both the mini dehumidifier
and drying base to cool down
before moving.
3
Page 4
• When moving the mini
dehumidifier, carry it by the
top handle.
• Use this mini dehumidifier
only as described in this
instruction manual. Any other
use not recommended by the
manufacturer may cause fire,
electric shock or injury and
void all warranties
• The appliance is not intended
for use by persons (including
children) with reduced physical,
sensory or mental capabilities,
or lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning use
of the appliance by a person
responsible for their safety.
IMPORTANT
SAFEGUARDS
FOR ALL
ELECTRICAL
APPLIANCES
• Fully unwind the power cord
before use.
• Connect only to a 230V or
240V power outlet.
• Do not let the power cord
hang over the edge of a bench
or table, touch hot surfaces or
become knotted.
• To protect against electric
shock, do not immerse the
power cord, power plug or
appliance in water or any
other liquid or allow moisture
to come in contact with the
part, unless it is recommended
in the cleaning instructions.
• Children should be supervised
to ensure that they do not play
with the appliance.
• It is recommended to regularly
inspect the appliance. To
avoid a hazard, do not use the
appliance if power cord, power
plug or appliance becomes
damaged in any way. Return
the entire appliance to the
nearest authorized Breville
Service Centre for examination
and/or repair.
• Any maintenance other than
cleaning should be performed
at an authorised Breville
Service Centre.
• This appliance is for household
use only.
• Do not use this appliance
for anything other than its
intended use. Do not use in
moving vehicles or boats.
Do not use outdoors.
Misuse may cause injury.
4
Page 5
• The installation of a residual
current device (safety switch)
is recommended to provide
additional safety protection
when using electrical
appliances. It is advisable
that a safety switch with a
rated residual operating
current not exceeding 30mA
be installed in the electrical
circuit supplying the
appliance.
• See your electrician for
professional advice.
• During electrical storms,
the appliance should be
disconnected from the power
source at the wall socket to
prevent any electrical surges
that may arise during the
storm and which may
inadvertently cause damage
to the appliance and its
electronic componentry.
• Always turn the appliance to
the OFF position, switch off at
the power outlet and unplug
at the power outlet when the
appliance is not in use.
• Before cleaning, always turn
the appliance to the OFF
position, switch off at the
power outlet, unplug at the
power outlet and remove the
power cord, if detachable,
from the appliance and allow
all parts to cool.
• Do not place this appliance
on or near a heat source, such
as hot plate, oven or heaters.
• Position the appliance at a
minimum distance of 20cm
away from walls, curtains and
other heat or steam sensitive
materials and provide
adequate space above and on
all sides for air circulation.
WARNING
To avoid electric shock, do not
connect the plug to the power
outlet when hands are wet.
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
5
Page 6
Components
A
B
E
I
C
D
A. Moisture status viewing window
B. Mini dehumidifier
C. Detector switch
D. Indicator light
E. Handle
6
F
G
H
F. Hot air outlet
G. Power cord
H. Drying base
I. Elastic hanging cord
Page 7
Features
WHAT IS A DEHUMIDIFIER?
Your Breville mini dehumidifier is designed
to reduce moisture in small and compact
spaces, such as wardrobes and drawers, to
prevent mould and mildew in its surrounds.
The mini dehumidifier is reusable and perfect
for protecting closets, wardrobes, drawers,
bookcases, handbags, cars, and shoe boxes
where excess moisture may be present.
This device is designed for compact enclosed
spaces. For larger open spaces please review on
breville.com for more suitable models.
HOW DOES A SILICA BEAD
DEHUMIDIFIER WORK?
The silica beads absorb moisture from the
air surrounding the unit and the beads in the
viewing window change colour to indicate
when they are saturated and need drying.
When the beads in the viewing window turn
green, return the mini dehumidifier to the
drying base to dry. Once the silica beads turn
orange again, the mini dehumidifier is ready
for dehumidification once again.
NOTE
The drying base is only for drying the mini
dehumidifier and is not required during
dehumidification. Only the drying base
contains electrical parts.
BEFORE FIRST USE
1. Before using your mini dehumidifier for the
first time, remove all packaging material and
promotional labels.
2. Check for any missing or damaged parts as
per the components list.
3. Clean all parts according to the Care, Cleaning
& Storage section of this book.
4. Check the colour of the silica beads in the
viewing window.
• Orange indicates the mini dehumidifier is
ready to use for dehumidification.
• Green indicates the mini dehumidifier
needs to be dried using the drying base
provided.
DRYING THE MINI DEHUMIDIFIER
If the silica beads in the viewing window are
green, the beads have absorbed moisture to
capacity and it is time to place the unit on the
drying base. Use only the drying base designed to
be used with this mini dehumidifier to dry.
1. Position the base at least 10cm from any
obstructions before use.
2. Connect the power plug of the drying base to
a 230V or 240V outlet and switch on at the
outlet. A white indicator light will flash on the
drying base indicating the base is in standby
mode.
3. Place the mini dehumidifier onto the drying
base. This will engage the detector switch and
activate the hot air outlet to begin drying the
silica beads. The indicator light will illuminate
green while drying and the silica beads will
gradually change colour from green to orange.
4. The drying base will operate for 2 hours, then
automatically stop and return to standby
mode.
5. Once drying is complete, the indicator light
will flash white again as the drying base
7
Page 8
returns to standby mode. The silica beads
should now be orange.
NOTE
If after 2 hours of drying the silica beads do not
change to orange, more drying time is required.
This may be due to environmental factors. To
restart the cycle and continue drying, remove
the mini dehumidifier from the drying base
for 3 seconds before replacing back onto the
drying base to dry for a further 2 hours.
If the mini dehumidifier is removed from
the drying base before the drying cycle has
finished, the indicator light will stay green
and the fan in the drying base will continue
to operate for 1 minute to cool the unit down
before returning to standby mode and the light
will illuminate white.
Remove the mini dehumidifier from the drying
base and unplug the base from the power
outlet when not in use. When the beads are
orange, the mini dehumidifier is now ready to
use for dehumidification.
NOTE
Placing the mini dehumidifier on the drying
base will start the 2 hours drying cycle. If,
during this process, the unit is disturbed, such
as being removed or knocked, the drying cycle
will reset back to 2 hours.
Functions
USING YOUR BREVILLE MINI
DEHUMIDIFIER
• Your Breville mini dehumidifier is a versatile
and compact solution to remove moisture
from small and compact spaces.
• Additional units of the mini dehumidifier can
be purchased separately without the drying
base, to be used in multiple spaces. Look out
for the Kit version on breville.com.au or at a
electrical retail stockists.
• Place the mini dehumidifier only (do not use
the drying base) in your chosen location to
absorb moisture. As moisture starts to be
absorbed from the air, the silica beads will
begin to turn colour. Once the silica beads
turn green, return the mini dehumidifier to
the drying base to dry before further use.
• An elastic hanging cord is also provided for
your convenience. Use the hanging cord if
you want to hang the mini dehumidifier, for
example, from a closet rod or coat hanger.
WARNING
After drying, the mini dehumidifier and hot air
outlet will be hot. Use the handle to remove the
mini dehumidifier from the drying base.
8
Page 9
Care, Cleaning
& Storage
WARNING
Before cleaning or maintenance of the drying
base, ensure the power is switched o at the
outlet and the plug is removed.
CLEANING YOUR MINI
DEHUMIDIFIER
1. Keep the mini dehumidifier upright when
cleaning.
2. Wipe the mini dehumidifier body with a
soft, dry cloth to remove any excess dust.
3. To remove dirt that may have built up on
the body, wipe with a damp cloth only.
CLEANING YOUR DRYING BASE
1. Ensure the drying base is switched off at
the outlet and the plug is removed before
cleaning.
2. Keep the base upright when cleaning.
3. Wipe the base with a soft, dry cloth for any
excess dust.
4. To remove dirt that may have built up on
the base, wipe with a damp cloth only.
STORAGE
1. Disconnect the drying base from the power
outlet.
2. Clean the mini dehumidifier and drying
base as per instructions.
3. Store the mini dehumidifier on the drying
base upright and avoid standing in direct
sunlight if leaving for long periods.
4. Never store anything on top of the mini
dehumidifier.
NOTE
Do not use any objects, such as a wire
brush, that may scratch to clean the mini
dehumidifier or drying base.
9
Page 10
Notes
10
Page 11
Notes
11
Page 12
Breville Customer Service Centre
Australian Customers
Phone: 1300 139 798
Web: www.breville.com
New Zealand Customers
0800 273 845
Phone:
Web: www.breville.com
Breville, the Breville logo, Master Every Moment and Re-Fresha
are trademarks of Breville Pty. Ltd. A.B.N. 98 000 092 928.
Due to continued product improvement, the products illustrated/photographed in this booklet
Copyright Breville Pty. Ltd. 2022.
may vary slightly from the actual product.
LAD100 ANZ A22
Loading...