Breville BJE200 Operating Manual

Instructions for use Includes recipes

Juice Fountain

Compact and easy clean design

Model BJE200 & BJE200C

Contents

Page

Introduction 3

Breville recommends safety first 4

Important safeguards for your Breville Juice Fountain 4

Important safeguards for all electrical appliances 5

Know your Breville Juice Fountain 6

Assembling your Breville Juice Fountain 7

Operating your Breville Juice Fountain 10

Disassembling your Breville Juice Fountain 11

Care and cleaning 13

Trouble shooting guide 14

Tips on juicing 15

Fruit and vegetable facts 17

Recipe ideas R2

Congratulations

on the purchase of your new Breville Juice Fountain

Breville recommends safety first

We at Breville are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer foremost in mind. In addition, we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions. Carefully read all instructions before operating and save for future reference.

Important safeguards for your Breville Juice Fountain

• Do not push produce into the feed chute with your

fingers. Always use the food pusher provided.

• Do not touch the small cutting blades in the base

of the stainless steel filter basket.

• Always make sure the Juice Fountain is properly

and completely assembled before connecting to power outlet and operating. The unit will not turn ‘ON’ unless properly assembled.

• Always use the Juice Fountain on a dry, level surface.

• Always turn the Juice Fountain off then turn off at

the power outlet and then unplug when not in use or when disassembling or assembling.

• Do not juice stone fruit unless seed stone has

been removed.

• Always turn the Juice Fountain ‘OFF’ at the power

outlet and the remove cord – if appliance is left unattended, - if not in use, - before cleaning, - before attempting to move the appliance, disassembling, assembling and when storing the appliance.

• Do not operate the Juice Fountain continuously on

heavy loads for more than 10 seconds. None of the recipes in this book are considered a heavy load.

EXTRA WIDE FEED CHUTE. DO NOT PLACE HANDS OR FOREIGN OBJECTS DOWN FEED CHUTE. ALWAYS USE THE FOOD PUSHER PROVIDED.

Important safeguards for all electrical appliances

• Fully unwind the cord before use.

• To protect against electric shock, do not immerse

cord, plug or motor base in water or any other liquid.

• Do not let the cord hand over the edge of a table

or counter, touch hot surfaces or become knotted.

• This appliance is not intended for use by young

children or infirm persons without supervision.

• Young children should be supervised to ensure that

they do not play with the appliance.

• It is recommended to regularly inspect the

appliance. Do not use the appliance if the power supply cord, plug or appliance becomes damaged in any way. Return the entire appliance to the nearest authorised Breville Service Centre for examination and/or repair.

• Any maintenance other than cleaning should be

performed at an authorised Breville Service Centre.

• This appliance is for household use only. Do not use

this appliance for anything other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors.

• The installation of a residual current device

(safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See your electrician for professional advice.

• The use of accessory attachments not

recommended by Breville may cause a risk of injury to persons, fire or electric shock.

Know your Breville Juice Fountain

Food pusher

for pushing whole fruit and vegetables down the patented wide feed chute

Unique patented centrally located feed chute

designed to extract more juice. The extra wide 75mm feed chute fits whole apples, carrots, tomatoes. Makes juicing fruit and vegetables fast and easy

Stainless steel micro mesh filter basket

(dishwasher safe)

Juice jug lid

allows juicer to operate with the lid on, therefore eliminating any splatter during operation. Place lid onto juice jug to store juice in refrigerator

Built in froth separator in lid

ensures juice froth is separated from juice when poured into a glass (if preferred)

To include froth in your juice simply remove the lid of the juice jug when pouring.

Note

Safety locking arm

Juicer will not operate without juicer

cover in place and safely locking arm in

place in the vertical operating position

Juicer cover

(dishwasher safe)

Integrated pulp container

will collect pulp for up to

1.5 litres of apple juice (dishwasher safe)

High performance

900 watt motor

Easy ‘ON’ and ‘OFF’ button

800ml dishwasher safe juice jug

Spatula

ruler style end of brush is to assist in the removal of pulp from the integrated pulp container when juicing large quantities

Cord wrap

cord wraps around a raised disc

on the base of the Juice Fountain

(not shown in picture)

Nylon bristle brush

included for easy cleaning of the

micro mesh filter basket

Assembling your Breville Juice Fountain

Step 1

Place the motor base on a flat, dry surface such as a bench top. Ensure that the motor base is switched ‘OFF’ at the power outlet and the power cord is unplugged.

Step 2

Place the integrated pulp container on top of the motor base. Locate the integrated pulp container so that the spout fits through the hole on the front of the motor base.

Step 3

Align the arrows on the stainless steel filter basket with the arrows on the motor drive coupling and push down until it clicks into place. Ensure the stainless steel filter basket is fitted securely inside the integrated pulp container and onto the motor base.

Assembling your Breville Juice Fountain continued

Step 4

Place the juicer cover over the stainless steel filter and integrated pulp container. The humps of the rim of the juicer cover should align with the small plastic wings on the integrated pulp container. Lower into position.

The juicing cover can be positioned in either of the plastic wings on the integrated pulp container.

Note

Step 5

Raise the safety locking arm up and lock into the two grooves on either side of the juicer cover. The safety locking arm should now be in a vertical position and locked into place on top of the juicer cover.

Step 6

Slide the food pusher down the feed chute by aligning one of the grooves in the food pusher with the small protrusion on the inside of the top of the feed chute. Continue to slide the food pusher down the feed chute.

FOOD PUSHER GROOVE

SMALL

PROTRUSION

INSIDE FEED TUBE

Step 7

Place the juice jug provided sideways under the spout of the Juice Fountain. A graphic on the lid shows where the juicer spout is to be placed. Note the jug is designed to clip in under the spout to give it a positive location.

A glass could also be used to collect the juice, but using the jug and lid is recommended to avoid any splatter.

Note

Operating your Breville Juice Fountain

Step 1

Wash your selection of fruit and vegetables ready for juicing.

Most fruit and vegetables such as small apples, carrots and cucumbers will not need to be cut to size as these will fit into the feed chute whole. When juicing carrots place the tip of the carrot into the feed chute last.

Note

Step 2

Ensure the Juice Fountain is correctly assembled. Ensure the stainless steel filter is thoroughly cleaned before each use (refer to care and cleaning) (See page 13). Ensure you place the juice jug with lid fitted (or glass) under spout before commencing juicing.

Step 3

Plug the power cord into a 230/240V power outlet and turn the power ‘ON’. Push the ‘ON/OFF’ button to ‘ON’.

Step 4

With the motor running, place food into the feed chute. Using the food pusher, gently guide food down the feed chute. To extract the maximum amount of juice, always push the food pusher down slowly.

Step 5

Juice will flow into the juice jug and the separated pulp will accumulate in the integrated pulp container.

When the integrated pulp container is full of pulp, it must be emptied before continuing to juice. (Refer to disassembling instructions on Page 11). Reassemble machine to continue juicing.

Note

NEVER USE FINGERS TO PUSH FOOD DOWN THE FEED CHUTE OR TO CLEAR THE FEED CHUTE. ALWAYS USE THE FOOD PUSHER PROVIDED.

Disassembling your Breville Juice Fountain

Step 1

Push the ‘ON/OFF’ button on Juice Fountain to ‘OFF’ and then switch ‘OFF’ at the power outlet and unplug.

Important

Wait for the filter basket to stop spinning before continuing to step 2.

Step 2

Pull the locking arm back over the grooves on either side of the juicer cover.

Step 3

Move the locking arm down.

Step 4

Remove the integrated pulp container (preferably with the juicer cover, stainless steel mesh filter and food pusher in place) by lifting vertically from the motor base. Take it to the sink for easy cleaning.

+ 25 hidden pages