Breville BJB815 User Manual

the 3X Bluicer Pro
Instruction Book - BJB815
Contents
IMPORTANT SAFEGUARDS
2 Breville Recommends Safety First 7 Components 8 Assembly 11 Functions 14 Care & Cleaning 16 Troubleshooting
BREVILLE RECOMMENDS SAFETY FIRST
At Breville we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition, we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.
READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE
• Before using the first time ensure your electricity supply is the same as shown on the label on the underside of the appliance. This appliance is equipped with a power cord having a grounding wire with a grounding plug. The appliance must be grounded using a properly grounded outlet. In the event of an electrical fault, grounding reduces the risk of electrical shock.
• Do not, under any circumstances, cut or remove the third (ground) prong from the power cord or use an adapter.
• Consult a qualified electrician if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.
2
• The installation of a residual current safety switch is recommended to provide additional safety when using all electrical appliances. Safety switches with a rated operating current not more than 30mA are recommended. Consult an electrician for professional advice.
• Remove and discard any packaging materials safely, before first use.
• To eliminate a choking hazard for young children, discard the protective cover fitted to the power plug safely.
• Always ensure the appliance is properly assembled, as per instructions, before use. Using the appliance without being properly assembled may cause product malfunction, product damage or pose safety risk including personal injury.
• This appliance is for household use only. Do not use the appliance for anything other than its intended purpose. Do not use in moving vehicles or boats. Do not use outdoors. Misuse may cause injury.
• Position the appliance on a stable, heat resistant, level, dry surface away from the counter edge, and do not operate on or near a heat source such as a hot plate, oven or gas hob.
• Fully unwind the power cord before operating.
• Do not let the power cord hang over the edge of a counter or table. Do not let the power cord touch hot surfaces or become knotted.
• Do not leave the appliance unattended when in use.
• If the appliance is to be left unattended, cleaned, moved, assembled or stored, always switch off the appliance by pressing the ON | OFF button to OFF. Unplug from the power outlet. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
• Turn the appliance OFF, then unplug from the outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
3
• Regularly inspect the power cord, plug and actual appliance for any damage. If found to be damaged in any way, immediately cease use of the appliance and return the entire appliance to the nearest authorized Breville Service Center for examination, replacement or repair.
• Keep the appliance and accessories clean. Follow the cleaning instructions provided in this book. Any procedure not listed in this instruction booklet should be performed at an authorized Breville Service Center.
• This appliance is not intended for use by children or by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge. Close supervision is necessary when any appliance is used near children. Children should be supervised to ensure that they do not play with the appliance.
• Children should not play with the appliance.
• Cleaning of the appliance should not be carried out by children.
• The appliance power cord, and any components, attachments or accessories should be kept out of reach of children aged 8 years and younger.
• Never use attachments or accessories that are not supplied with this product or authorised by Breville to be used on this product. Failing to follow this instruction may cause product malfunction, product damage, fire, electric shock or injury.
• Do not attempt to operate the appliance by any method other than those described in this booklet.
• Do not move the appliance while in operation.
• Do not operate the appliance on an inclined surface.
• Flashing light indicates ready to operate. Avoid any contact with blades or moveable parts.
• Do not put your fingers or other objects into the juicer opening while it is in operation. If food becomes lodged in opening, use food pusher or another piece of fruit or vegetable to push it down. When this method is not possible turn the motor off and disassemble juicer to remove the remaining food.
• Do not juice stone fruit like peach, plum or cherry unless seeds and/or stones have been removed.
4
• Make sure the product is turned OFF and the stainless-steel filter basket has stopped rotating and the motor has completely stopped before releasing the safety locking arm and/or attempting to move the appliance, when the unit is not in use, and before disassembling, cleaning and storing.
• Any significant spillage onto the surface under or around the appliance, or onto the appliance itself, should be cleaned and dried before continuing to use the appliance.
• Be careful when handling the stainless-steel filter basket as the small cutting blades at the base of the filter basket are very sharp. Mishandling may cause injury.
• Blender blades are sharp, take care when handling, emptying and cleaning the blender jug.
• Remove rind from all citrus fruit before juicing.
• Do not use the appliance if the rotating sieve (filter basket) or lid is damaged.
• Always make sure juicer cover is clamped securely in place before motor is turned on.
• Do not operate without the pulp container in place.
• Do not unfasten interlock arm while unit is in operation.
• Do not juice more than 6.5 pounds (3kg) of carrot at a time.
• Avoid putting the blender jug on the motor base while the motor is still spinning.
• Do not operate if the jug is empty.
• Never attempt to operate with damaged blades, or with utensils, or any foreign objects inside the jug.
• Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the blender. A scraper may be used but only when the unit is powered off.
• Do not put the jug in extremes of heat or cold, for example placing a cold jug into hot water, or vice versa.
• Lid must be firmly secured to the jug before operation to ensure internal contents do not escape, spray or overflow.
• Do not remove the jug
from the motor base while blender is in use.
5
• Do not use blender while OVERLOAD PROTECTION is flashing on the LCD. If this occurs, unplug the blender and wait for 30 minutes until the motor has cooled. Once cooled, you will be able to use the blender as usual again.
• Do not process hot or boiling liquids. Allow to cool before placing into the blender jug.
• To protect against electric shock, do not immerse the power plug, cord or appliance in water or any liquid.
• Authorized Breville Service Centers can be found on our website www.Breville.com
• The appliance power rating is based on the attachment that draws the maximum power, other attachments may draw significantly less power.
FOR HOUSEHOLD USE ONLY SAVE THESE INSTRUCTIONS
6
Components
H
A
B
C
D
E
F
J
K
I
L
G
A. Food pusher (not dishwasher safe) B. Juicer cover (dishwasher safe) C. Stainless steel filter basket (dishwasher safe) D. Filter bowl surround (dishwasher safe) E. Interlocking safety arm
Stops motor base operating without cover locked into place.
F. Control panel G. Stainless steel motor base
M
H. Inner measuring cup (dishwasher safe) I. 50 floz (1.5L) blending jug & lid (dishwasher
safe)
J. Juicing nozzle (dishwasher safe)
Can be placed over spout to juice directly into a cup.
K. Drip stop plug L. Pulp container (dishwasher safe) M. Cleaning brush
For use on Stainless Steel Filter Basket.
7
Assembly
BEFORE FIRST USE
Wash the lid, inner measuring cup, jug, the filter bowl surround, filter basket, juicer cover, food pusher and pulp container in warm, soapy water with a soft cloth. Rinse and dry thoroughly.
Place motor base on a flat, dry surface such as a countertop. Ensure that the appliance is switched to OFF at the motor base and the power cord is unplugged.
JUICING
1. Place filter bowl surround on
top of the motor base.
2. Align the arrows at the base of the
stainless-steel filter basket with the arrows on the motor drive coupling and push down until it clicks into place to create a secure fit with the motor base.
3. Place the juicer cover over the filter bowl surround, positioning the lower part of the feed chute over the stainless steel filter basket.
4. Raise the safety locking arm up and locate into the two grooves on either side of the juicer cover.
8
5. The safety locking arm should now be in a vertical position and locked into place on top of the juicer cover.
6. Slide the food pusher down the food chute by aligning the groove in the food pusher, with the small protrusion on the inside of the top of the feed tube.
Food pusher groove
Small protrusion inside feed tube
8. The drip stop plug can be fitted over juice outlet nozzle. It then allows the outlet to be plugged to prevent dripping after juicing.
9. Fit the lid to the blender jug and position jug under juice spout.
7. Place the pulp container into position by tilting and lifting the motor base slightly. Insert the pulp container under the juicer cover on the back ensuring the front edge is tucked under the back lip of the filter bowl surround and the bottom edge is clipped into the bottom of the motor base.
10. Optional: For juicing into a cup the Juicing Nozzle can be fitted onto the juice outlet nozzle.
9
BLENDING
1. With the blender jug in the upright position place it on the motor base. The handle of the blender can be positioned to the left or right-hand side of the appliance.
2. Raise the safety locking arm up and locate into the two grooves on either side of the blender.
4. Ensure the spout cover of the blender lid is clipped into place and closed. The ring pull design allows the user to easily remove the lid with a simple leverage action.
After appliance is assembled into blender or juicer configuration, plug power cord into a 120V power outlet.
Press the ON | OFF button to turn the appliance on. The ON | OFF button will illuminate. The LCD timer screen will illuminate with ‘0:00’ displayed.
3. Add food or liquid into the blender jug ensuring not to exceed the ‘MAX’ line. Place the blender lid firmly into position on the top of the blender jug. Insert the clear, inner measuring lid into the blender lid and turn clockwise to lock into position. The jug features a Breville
®
Assist™ Lid. This allows the lid to fit tightly onto the blender jug, avoiding displacement during operation.
10
Functions
GETTING STARTED
The ON | OFF button powers the unit into READY mode (red light blinking).
PRESET PROGRAMS
BLENDING
The appliance has 5 preset functions: GREEN SMOOTHIE, SMOOTHIE , PULSE/ ICE CRUSH, AUTO CLEAN and FROZEN COCKTAIL. These pre-programmed cycles automatically adjust the blending time and speeds to optimize blending results. These programs are only activated when your appliance is in blender set up. They can't be used when your appliance is set up in juicing configuration.
Select the required function by pressing the corresponding function button. The unit will start to operate, and the selected function button will illuminate. The timer will start to count down and program will end automatically when it reaches '0:00'.
The program and timer can be paused by pressing the pause button. Resume by pressing program button again, or cancel by pressing pause again.
The program can also be canceled at any time by pressing the ON|OFF button.
Turning the speed dial will interrupt the program, placing the blender in manual mode starting from Speed 1.
GREEN SMOOTHIE
For blending whole fruits/vegetables into a smooth beverage. A combination of high­speed profiles breaks down tough fibers into very fine particles.
SMOOTHIE
For dairy-based smoothies a combination of speeds and pulses are designed to combine and aerate ingredients into a smooth and creamy texture.
PULSE / ICE CRUSH
A program of continuous pulsing designed to chop food into an even consistency or crush ice cubes. Use the PULSE button when the food that is being processed is too thick or coarse to circulate within the blender jug.
The maximum amount of ice cubes the blender can blend without liquid in the jug at any one time is 10 standard ice cubes or approx. 10 ounces (280g).
11
Loading...
+ 25 hidden pages