Breville BIR300 Instruction Booklet

JetSteam Iron
Instruction Booklet
BIR300
3
CONGRATULATIONS
On the purchase of your new Breville JetSteam Iron
4 Breville Recommends Safety First
7 Know your Breville JetSteam Iron
10 Operating your Breville JetSteam Iron
- Before first use
- Setting the temperature
- Filling the water tank
- Operating the steam settings
- Using the shot of steam
- Dry ironing
- Using the fine mist spray
- Auto-off feature
- Anti-drip feature
- After each use
16 Care and Cleaning
- Self cleaning function
- Cleaning the soleplate and exterior
4
BREVILLE RECOMMENDS SAFETY FIRST
At Breville we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.
READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE
Carefully read all instructions before
operation and save for future reference.
Remove and safely discard any
packaging material and promotional labels before using the appliance for the first time.
To eliminate a choking hazard for young
children, remove and safely discard the protective cover fitted to the power plug of this appliance.
Do not use the iron for anything other
than its intended use.
Always turn the Variable Temperature
Control to minimum, then switch off at the power outlet, then unplug the appliance when not in use.
Do not allow cord to touch hot surfaces.
Allow the iron to cool completely before
storing in an upright position on its heel.
Do not touch hot surfaces. High
temperatures are generated during use, which could cause burns. Always use the handle and warn others (especially children) of the possible dangers of burns from steam, hot water or hot soleplate, especially when ironing vertically.
Do not leave the appliance unattended
when in use.
The iron must be used and rested on a
stable surface
IMPORTANT SAFEGUARDS
When placing the iron on its stand,
ensure that the surface on which the stand is placed is stable.
The iron is not to be used if it has been
dropped, if there are visible signs of damage or if it is leaking.
Do not allow the iron to lay flat on the
soleplate when stored as water may seep through the steam holes, if the tank is not empty.
Always test the iron on a small, discreet
part of the fabric to be ironed to ensure the temperature is not set too high.
Always store the iron in the upright
position on its heel. Do not leave the iron unattended while connected or on an ironing board.
Do not use outdoors or in bathrooms.
Do not store the iron with water in the
water tank. Always empty the tank after use. Ensure the iron is cool before storing or wrapping the cord around the storage heel facility.
Always switch off at the power outlet, then
unplug the appliance from the outlet:
- Before filling with water or emptying it.
- Before leaving it unattended.
- Before cleaning and maintenance,
unless otherwise specified in this booklet.
- Immediately after use.
5
BREVILLE RECOMMENDS SAFETY FIRST
!
TO PROTECT AGAINST ELECTRIC SHOCK, DO NOT IMMERSE THE IRON, CORD OR PLUG IN WATER OR ANY OTHER LIQUID.
Please refer to cleaning instructions on page 17 of the Instruction Booklet.
6
IMPORTANT SAFEGUARDS FOR ALL ELECTRICAL APPLIANCES
Fully unwind the cord before using
this appliance.
The appliance is not intended for use by
persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
This appliance is for household use only.
Do not let the cord hang over the edge of
a table or counter, or touch hot surfaces.
Do not use the appliance for anything
other than its intended purpose as described in this booklet. Do not use outdoors. Do not use in moving vehicles or boats. Misuse may cause injury
Close supervision is necessary when any
appliance is used by or near children.
Regularly inspect the supply cord, plug
and actual appliance for any damage.
Do not operate if damaged in any way or
after the appliance malfunctions.
Immediately cease use of the appliance
and call Breville Customer Service at 1300-139-798 for examination, repair or adjustment.
For any maintenance other than
cleaning, call Breville Customer Service at 1300-139-798.
Consult a qualified electrician if
the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.
The installation of a residual current
device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See your electrician for professional advice.
!
DO NOT OPERATE THE APPLIANCE ON AN INCLINED SURFACE.
BREVILLE ASSIST ™ PLUG
Your Breville appliance comes with a unique Assist™ Plug, conveniently designed with a finger hole in the power plug for easy and safe removal from the wall outlet. For safety reasons it is recommended you plug your Breville appliance directly into its own electrical outlet on a dedicated circuit separate from other appliances. If the electric circuit is overloaded with other appliances, your appliance may not function properly.
Use in conjunction with a power strip or extension cord is not recommended
BREVILLE RECOMMENDS SAFETY FIRST
SAVE THESE INSTRUCTIONS
Loading...
+ 14 hidden pages