Breville BHT331MDN User Manual

Breville Customer Service Centre

Australian Customers

Mail: Locked Bag 2000

Botany NSW 1455
AUSTRALIA

Phone: [phone]

Fax: [phone]

Customer Service:

Email:

[e-mail]

New Zealand Customers

Mail: Private Bag 94411

Botany Manukau 2163
Auckland NEW ZEALAND

0800 273 845

Phone:

Fax: [phone]

Customer Service:

Email:

[e-mail]

Web: www.breville.co.nzWeb: www.breville.com.au

Breville is a registered trademark of Breville Pty. Ltd. A.B.N. 98 000 092 928.

Due to continued product improvement, the products illustrated/photographed

in this brochure may vary slightly from the actual product.

Copyright Breville Pty. Ltd. 2015.

BHT331 & BHT632 ANZ – A15

LavishVelvet & LushPlush

Heated Throw Instruction Book - BHT331 & BHT632

Contents

IMPORTANT
SAFEGUARDS

2 Breville Recommends Safety First
8 Components
10 Functions
12 Care & Cleaning

BREVILLE
RECOMMENDS
SAFETY FIRST

At Breville we are very safety
conscious. We design and
manufacture consumer
products with the safety of you,
our valued customer, foremost
in mind. In addition we ask
that you exercise a degree of
care when using any electrical
appliance and adhere to the
following precautions.

READ ALL INSTRUCTIONS
BEFORE USE AND SAVE
FOR FUTURE REFERENCE

• Remove any packaging
material and promotional
stickers before using the
Breville heated throw for the
first time.

• Use the heated throw only
with the detachable controller
CTL151 supplied. Refer to the
markings on the heating unit
for the model number of the
controller.

• Connect only to 230V or 240V
power outlet.

• Do not pull the heated throw by
the flexible cord or use the cord
to carry the heated throw.

• Do not attempt to expose the
internal wires.

• Extended application at the
HIGH heat setting may result
in skin irritation or burns.

• Do not use the heated throw on
areas of sensitive skin or areas
insensitive to burns.

2

• Do not use the heated throw
with any incapacitated
person, an infant or a person
insensitive to heat.

• Children under the age of three
are not to use this heated throw
due to their inability to react to
overheating.

• The heated throw is not to
be used on or by an invalid,
a sleeping or unconscious
person, or a person with
poor blood circulation unless
carefully attended.

• This heated throw is to be used
as a wrap only.

• This heated throw is not an
electric blanket or an under­blanket.

• This heated throw is not
intended for medical use in
hospitals.

• This heated throw is for
household use only.

• Do not use this heated throw
for anything other than its
intended use. Do not use
outdoors.

• Avoid sharp objects, Do not
insert pins or any sharp object
into the heated throw as they
may damage the electrical
wiring.

• Do not use the heated throw in
a folded, rucked or rolled state.

• Do not use with wires tucked
in.

• Do not sit on, crease or crush
the heated throw.

• Do not use the heated throw if
it is wet or moist.

• Do not use under clothing,
wraps or blankets.

• Do not use the heated throw
as an electric blanket. It is not
designed for all-night use.

• This heated throw must not be
used over a water bed.

• If any abnormality or defect in
operation of this heated throw
is observed, discontinue its
use immediately and contact a
Breville Service Centre.

• Do not fall asleep when using
the heated throw. This product
is not intended for use while
sleeping.

3

• Do not use the heated throw for
animals or pet care.

• Switch the heated throw control
to the ‘OFF’ position, switch off
at the power outlet and remove
the plug when the heated throw
is not in use or before storing.

• Do not dry clean the heated
throw. Dry cleaning may
have a detrimental effect
on the heated throw. Follow
the instructions in the Care,
Cleaning and Storage section
when cleaning and storing the
heated throw.

• Do not iron the heated throw.

• Do not bleach the heated throw.

• Regularly inspect the heated
throw, power supply cord, plug
and controller for any wear,
damage or misuse. If signs of
these are detected, immediately
cease use of the heated throw
and return the entire unit to
your nearest Breville Service
Centre for examination,
replacement or repair.

• It is recommended that a
qualified and registered person
inspect your heated throw after
each 3 years of use.

• When storing the heated throw,
allow it to cool down before
folding.

• When storing, fold neatly,
but not tightly, (or roll) in the
original packaging without
sharp bends in the heating
element and store where no
other objects will be placed
upon it.

• Do not place any items on
top of the heated throw when
storing to avoid creasing.

• There are no customer
serviceable parts inside. The
heated throw is fitted with a
specially designed controller
and no attempt should be
made to repair it or to replace
the protective fuse. Have the
heated throw serviced only by a
qualified service agent at your
nearest Breville Service Centre.

4

IMPORTANT
SAFEGUARDS
FOR ALL
ELECTRICAL
APPLIANCES

• Fully unwind the power cord
before use.

• Connect only to 230V or 240V
power outlet.

• Do not let the power cord hang
over the edge of a bench or
table, touch hot surfaces or
become knotted.

• To protect against electric
shock, do not immerse the
power cord, power plug or
appliance in water or any
other liquid, unless it is
recommended in the cleaning
instructions.

• The appliance is not
intended for use by persons
(including children) with
reduced physical, sensory
or mental capabilities, or
lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning use
of the appliance, by a person
responsible for their safety.

• Children should be supervised
to ensure that they do not play
with the appliance.

• It is recommended to inspect
the appliance regularly. Do not
use the appliance if the power
supply cord, plug, connector or
appliance becomes damaged
in anyway. Return the entire
appliance to the nearest
authorised Breville Service
Centre for examination and/or
repair.

• Any maintenance other than
cleaning should be performed
at an authorised Breville
Service Centre.

• This appliance is for household
use only. Do not use this
appliance for other than its
intended use. Do not use in
moving vehicles or boats. Do
not use outdoors. Misuse may

cause injury.

• The installation of a residual
current device (safety switch)
is recommended to provide
additional safety protection
when using electrical
appliances. It is advisable that
a safety switch with a rated
residual operating current
not exceeding 30mA be
installed in the electrical circuit
supplying the appliance. See
your electrician for professional
advice.

5

• Always turn the appliance to
the OFF position, switch off at
the power outlet and unplug
at the power outlet when the
appliance is not in use.

• Before cleaning, always turn the
appliance to the OFF position,
switch off at the power outlet,
unplug at the power outlet
and remove the power cord, if
detachable, from the appliance
and allow all parts to cool.

• Do not place this appliance on
or near a heat source, such as
hot plate, oven or heaters.

• Position the appliance at a
minimum distance of 20cm
away from walls, curtains and
other heat or steam sensitive
materials and provide adequate
space above and on all sides for
air circulation.

6

FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS

7

Components

Image 2

A

Image 1

J

B

C

H

G

F

E

D

I

8

A. Heated Throw

(Dimensions approx. 1300 x 1600mm WxL)

– Image 1: BHT331MDN Reversible
MicroPlush & Sherpa Throw
– Image 2: BHT632DSK Velvet Throw

B. Controller connector: found attached to the

heated throw

C. Controller plug with locking clips: found at

one end of the power cord

D. Detachable controller
E. Power/Heat setting button: press button

to turn throw on/off and to adjust the heat
settings

F. LOW heat with orange colour LED indicator

light

G. MEDIUM heat with blue colour LED indictor

light

H. HIGH heat with green colour LED indicator

light

I. Auto-off with red colour indicator light; after

3 hours the heated throw will automatically
turn off

J. 1.8m power cord

Not Shown:

• Flexible heating wire

• Safety overheat protection

• Reusable poly bag: ideal for storing the

heated throw and controller when not in use

9

Functions

BEFORE FIRST USE

Remove any promotional material and
packaging from the heated throw.

The poly bag is reusable and can be kept for
safely storing the heated throw when it is not
in use.

The controller can be found unattached and
wrapped inside the throw.

TO DETACH THE CONTROLLER

Press and hold down the locking clips. Pull the
controller plug out of the controller connector.

NOTE

The heated throw is designed to be reversible.
Heat will generate equally from either side of
the throw.

TO CONNECT THE CONTROLLER

The heated throw has a detachable controller
which allows the throw to be machine
washable.

Ensure the heated throw power/heat button is
in the off position and not pressed and that the
unit is not connected to a power supply.

To connect the controller, insert the controller
plug found at the end of the power cord to
the controller connector on the throw. Ensure
the locking clips align with the controller
connector.

OPERATING THE HEATED THROW

Ensure the heated throw power/heat setting
button is in the off position and not pressed.

Plug the power cord into a 230V or 240V
power outlet and switch the power on.

Press the power/heat settings button once to
turn the heated throw on.

ADJUSTING THE TEMPERATURE

The three heat settings allow you to choose
the right setting for you depending on your
personal comfort.

Adjust the heat temperature by pressing the
power/heat setting button until the desired
indicator light illuminates:

LOW heat setting
– orange coloured LED indicator light

MEDIUM heat setting
– blue coloured LED indicator light

HIGH heat setting
– green coloured LED indicator light

NOTE

The heated throw will take 40 minutes to reach
the desired temperature, however you will start
feeling warm after 15-20 minutes.

10

AUTO-OFF PROTECTION

For added safety, the heated throw is designed
with auto-off protection.

After 3 hours the heated throw will
automatically turn off and the red auto-off
indicator light will illuminate and flash.

To restarted or continue using the heated
throw, press the power/heat setting button
to turn the heated throw on, then select your
desired heat setting.

TURNING OFF THE HEATED THROW

Press the power/heat setting button until
none of the heat setting indicator lights are
illuminated. The heated throw is now in the off
position.

Switch off at the power supply and unplug the
power cord from the power outlet.

NOTE

For added safety, after three hours the heated
throw automatically switches off.

NOTE

Do not leave the heated throw in contact
with skin for excessive periods of time. For
continuous use, it is recommended that the
LOW heat setting should be used.

11

Care & Cleaning

NOTE

DO NOT dry clean. DO NOT iron.

WARNING

The controller must be removed from the
heated throw before washing.

USE ONLY THE FOLLOWING
INSTRUCTIONS

Before cleaning, ensure that the controller is
unplugged from the power supply and that
the controller is disconnected from the heated
throw.

SPOT CLEANING

Sponge the affected area using a lukewarm
neutral detergent or mild soapy solution.
Follow this with sponging, using a clean
water solution. Remove any excess water by
compressing the wet area between absorbent
towels.

MACHINE WASHING

The heated throw can be washed in a domestic
washing machine (size permitting) or by a
commercial laundry.

To wash your throw in a domestic

•

washing machine, wash on the WOOL or
DELICATES setting using a neutral wool
detergent or mild soap solution.

DO NOT wash on a HOT cycle as the

•

temperature must be kept below 30˚C.
DO NOT use high speed or extra spin

•

cycles.
DO NOT machine wash with the controller

•

connected to the heated throw.

DRYING

Drape the heated throw across a clothes line

•

and drip dry.
DO NOT use pegs to secure the heated

•

throw in position.
DO NOT dry with a hair dryer or heater.

•

DO NOT twist or wring dry.

•

DO NOT tumble dry the heated throw as it

•

may damage the internal heating wires.
DO NOT use moth balls or sprays on the

•

heated throw.

HAND WASHING

Immerse the heated throw with controller

•

removed in a soapy solution of lukewarm
water and mild, neutral detergent.

Soak for five minutes then gently squeeze

•

the solution through the throw.
Rinse thoroughly in clean, lukewarm water,

•

then gently squeeze any excess water from
the heated throw.

WARNING

The controller must be removed from the
heated throw before washing. Never immerse
the detachable controller in water or any other
liquid.

WARNING

DO NOT tumble dry.

12

STORAGE

Pack the heated throw in its original poly

•

bag packaging for best protection.
When storing the heated throw, allow it to

•

cool down before folding.
DO NOT store the heated throw when wet.

•

Detach the controller from the heated throw

•

before storing.
When storing, roll neatly, but not tightly,

•

in the poly bag without sharp bends in the
heating wires.

Place the detachable controller on top of the

•

rolled throw before zipping the bag closed.
Store in a cool, clean and dry location.

•

DO NOT place any items on top of the

•

heated throw when storing to avoid creasing.

NOTES

13

NOTES

14

NOTES

15