Breville VIN359, 2200W power steam, PressXpress 2600W User Manual

2200W power steam
steam iron
®
2
Important Safety Information
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Keep the appliance and its cord out of reach of children less than 8 years old when it is switched on or cooling down.
The appliance must not be left unattended when it is connected to the mains supply.
The appliance must be unplugged from the mains
supply socket before lling the water tank with water.
Always use the appliance on a stable, secure, dry and level surface. When placing the appliance on its stand, ensure that the surface on which the stand is placed is stable.
Do not use the appliance if it has been dropped, if there are any visible signs of damage or if it is leaking.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualied persons in order to avoid a hazard.
! Never use this appliance for anything other than its intended use. This appliance is
for household use only. Do not use this appliance outdoors.
! Always ensure that hands are dry before handling the plug or switching on the
appliance.
! Do not touch the metal parts of the appliance during use as they may become very
hot.
! This appliance must not be placed on or near any potentially hot surfaces (such as
a gas or electric hob).
! Always allow the appliance to cool before cleaning or storing. ! Never immerse any part of the appliance or power cord and plug in water or any
other liquid.
! Never let the power cord hang over the edge of a worktop, touch hot surfaces or
become knotted, trapped or pinched.
3
Before using for the rst time
Warning: Remove all packaging including any soleplate protection before using
your iron.
Wipe over the soleplate with a cloth moistened with methylated spirit. Wipe off the methylated spirit with a damp cloth then dry the soleplate thoroughly.
Before connecting your iron to the mains supply, make sure your supply voltage is the same as the one indicated on your iron.
When you rst use your iron, there may be a slight odour and it may smoke slightly for the rst few minutes of operation. This is quite normal and will disappear.
Cleaning your iron before use
Follow these simple steps to remove any impurities or residues inside your steam iron that may be left over from the manufacturing process.
1. Follow the instructions under lling your iron and ll the water tank as described.
2. Empty the water tank to rinse out any foreign particles then rell it.
3. Follow the instructions under steam ironing. Set the temperature to the MAX setting and the steam control to the high steam setting.
4. Iron an old piece of cloth (cotton or towelling is ideal) for a few minutes. While ironing, press the steam button 4 or 5 times.
5. Any impurities will be ushed from your iron by the steam and absorbed by the cloth. Your iron is now ready for use.
1. Water tank inlet cover
2. Steam control
3. Shot of steam button
4. Spray button
5. Temperature indicator light
6. Temperature control
7. Power indicator light
8. Ceramic nish soleplate
9. Water tank
10. Temperature control index mark
11. Self-clean button
12. Safe-Store™ heat indicator strip
13. Water level MAX indicator
14. Spray nozzle
MAX
wertq
s
y
a
o
u
fgd
Loading...
+ 5 hidden pages