Exact Series
Precision Trimmer
PT 10
English 3
4
6
10
Type 5363
65663422/IX-08
GB/Chin-s/Chin-c/Korea
English
Please read the use instructions
carefully and thoroughly before
using the appliance.
Warning
Keep the appliance dry. Keep
the appliance out of the reach of
children.
Do not use the appliance on
irritated skin.
Never use the appliance if the
cutting head is damaged or
broken.
Batteries
This appliance operates with
one AAA 1.5 V battery. For best
performance, use an alkaline
manganese battery (type LR03,
AM4, AAA, e.g. Duracell).
Make sure the appliance is
turned off.
Remove the battery compartment cover (4) by pulling
downwards (a).
Insert the battery with the (+)
and (–) poles in the direction
marked.
Close the battery compartment.
Note:
If the appliance is not
used for long periods of time,
do not leave the battery inserted
(danger of leakage). Take an
expired battery out of the
appliance immediately.
Used batteries should not be
disposed of with the household
waste. Please dispose of them
at special collection points or
return them to your retailer or
authorised service centres.
Using the appliance
Your Exact Series Precision
Trimmer is perfectly suited for
closely and safely removing any
unwanted hair on body and face
(e.g. neck, back, eye brows).
Slide the on/off switch (3) up to
turn the appliance on.
Place the cutting head (2)
against the hair to be removed
and guide it slowly against the
direction of hair growth. For
optimum results, pull the skin
taut with one hand while using.
The appliance comes with two
trimming combs in different
lengths for trimming hair to a
uniform length (e.g. eyebrow
shaping):
• short trimming comb (6):
5 mm / 1/5"
• long trimming comb (7):
8 mm / 1/3"
Ensure that the appliance is
turned off before attaching a
trimming comb.
We recommend that you start
with the long trimming comb.
Slide it over the cutting head (2)
until it clicks into place.
Turn on the appliance and
gently comb your eyebrow
against the direction of hair
growth as shown in (c). Ensure
that either one of the comb
sides is guided flat against the
skin.
Cleaning and maintenance
Always turn off the appliance
before cleaning.
Remove the cutting head (2) by
turning counterclockwise 90°
and then lifting it up.
You can rinse the detached
cutting head under warm
running water.
Please ensure that the cutting
head is complete dry before
attaching it.
For storage, attach the
protective cap (1).
We recommend lubricating the
blade with a drop of light
machine oil twice a year or after
cleaning with water.
Subject to change without
notice
This product conforms
to the European
Directive EMC 89/336/
EEC.
Please do not dispose
of this appliance in the
household waste at the
end of its useful life.
Disposal can take place at
a Braun Service Centre or at
appropriate collections points
provided in your country. .
Guarantee
2 year guarantee against
material and workmanship
defects (except battery). This
guarantee is valid in those
countries where this product is
officially being sold.
3