Braun 9297cc, 9296cc, 9295cc, 9292cc, 9291cc Service Manual

...

Series 9

91845282/III-18

9297cc 9296cc 9295cc 9292cc 9291cc 9290cc 9280cc

Wet&dry Peau sèche et mouillée

Type 5791 Modèle 5791 Modelo 5791

9299s 9293s 9260s 9242s 9240s

www.braun.com

Braun Infolines Lignes d’assistance Braun Líneas de información de

Braun

English 6

Français 20

Español 33

Thank you for purchasing a Braun product. We hope you are completely satisfied with your new Braun shaver. If you have any questions, please visit www.service.braun.com or call: US residents 1-800-BRAUN-11 1-800-272-8611 Canadian residents 1-800-3876657

Merci d’avoir fait l’achat d’un produit Braun. Nous espérons que vous serez entièrement satisfait de votre nouveau rasoir Braun. Si vous avez des questions, veuillez visiter le www.service.braun.com ou appeler Braun Canada : 1-800-387-6657

Gracias por haber comprado un producto Braun. Esperamos que quede completamente satisfecho con su nuevo producto Braun.

EN/FR/ES

Ser

ies 9

Ser

Series 9

ies

ies 9

10a

9299s 9297cc 9296cc

9295cc 9293s 9292cc

9291cc 9290cc 9260s

9280cc

9242s

9240s

9299s 9293s 9260s

9242s 9240s

15 a

15 c

15 b

9297cc, 9296cc, 9295cc, 9292cc, 9291cc, 9290cc, 9280cc

Series

Series 7

20°

10°

0°

10°

90°

20°

10°

20°

0°

10°

Series 9

s 7

English

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following:

Read all instructions before using this appliance.

When disconnected, the hand-held part of this shaving appliance may be used in a bath or shower. For safety reasons, the

appliance can only be operated cordless.

DANGER

To reduce the risk of electric shock:

1. The charger unit is not for immersion in water or for use in shower.

2. Do not reach for a charger that has fallen into water. Unplug immediately.

3. Do not place, store or charge the appliance where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid.

4. Except when charging, always unplug this appliance from the electrical outlet immediately after using.

5. This appliance is provided with a special cord set with integrated Safety Extra Low Voltage power supply. Do not exchange or manipulate any part of it.

6. Do not use an extension cord with this appliance.

7. Unplug this appliance before cleaning.

WARNING

To reduce the risk of burns, fire, electric shock, or injury to persons:

1. Close supervision is necessary when this appliance is used by, on, or near children or persons with disabilities.

2. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.

3. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or if the power supply has been dropped into water. Return the appliance to a service center for examination and repair.

4. Keep the cord away from heated surfaces.

5. Never drop or insert any object into any opening of the appliance.

6. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.

7. Do not use this appliance with a damaged or broken foil, as serious skin injuries may occur.

8. Always attach plug to appliance first, then to outlet. To disconnect, turn all controls off, then remove plug from outlet.

9. When plugging to an electrical outlet outside North America, use a plug adapter to match the outlet’s pin configuration.

10. Caution: The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not disassemble, heat above 100 °C (212 °F), or incinerate.

11. To recharge the battery, only use the detachable power supply provided with this appliance. If the appliance is marked only use Braun power supplies coded 492-XXXX.

492

SAVE THESE INSTRUCTIONS

Our products are designed to meet the highest standards of quality, functionality and design. Thank you for your trust in Braun’s quality, and we hope you enjoy your new Braun shaver.

Important

Do not open the appliance! Only at the end of the product’s useful life, disassemble the rechargeable battery for disposal reasons as shown in the battery removal section. This product is for household use only.

Warning Clean&Charge Station (not with all models)

To prevent the cleaning fluid from leaking, ensure that the Clean&Charge Station is placed on a flat surface. When a cleaning cartridge is installed, do not tip, move suddenly or transport the station in any way as cleaning fluid might spill out of the cartridge. Do not place the station inside a mirror cabinet, nor place it on a polished or lacquered surface. The cleaning cartridge contains a highly flammable liquid so keep it away from sources of ignition. Do not expose to direct sunlight and cigarette smoking nor store it over a radiator.

Do not refill the cartridge and use only original Braun refill cartridges.

Shaver

1 Foil & Cutter cassette 2 Cassette release buttons 3 MultiHeadLock switch 4 On/off switch 5 Shaver display* 6 Long hair trimmer 7 Shaver-to-station contacts 8 Release button for long hair trimmer 9 Shaver power socket 10 Special cord set* 10a Charging stand* (not with all models) 11 Travel case

* design can differ

First use and Charging

Connect the shaver to an electrical outlet by snapping the special cord set (10) into the power socket (9) / the charging stand (10a) or for cc models via the Clean&Charge Station (see Chapter «Clean&Charge Station»).

Charging and basic operating information

• When charging for the first time, charge continuously for 1 hour.

• A full charge provides up to 50 minutes of cordless shaving time. This may vary

according to your beard growth and environmental temperature.

• Recommended ambient temperature for charging is 41 °F to 95 °F / 5 °C to 35 °C. The battery may not charge properly or at all under extreme low or high temperatures.

• Recommended ambient temperature for shaving is 60 °F to 95 °F / 15 °C to 35 °C.

• Do not expose the shaver to temperatures higher than 122 °F / 50 °C for extended

periods of time.

• When the shaver is connected to an electrical outlet, it may take some minutes until the display illuminates.

Shaver display

Charge status

The shaver display (5) shows the charge status of the battery when connected to an electrical outlet:

• During charging the respective battery segment will blink.

• When fully charged all battery segments will light up for a few seconds then the

display turns off.

Low charge

The low-charge light flashes red when the battery is running low. You should be able to finish your shave. With switching off the shaver a beep sound reminds of the low charge status. The last 9 minutes of remaining shaving time are displayed in digits (depending on your model / display).

Cleaning status (only models with Clean & Charge Station) The cleaning indicator lights up when the shaver needs to be cleaned in the

Clean&Charge Station.

Travel lock

The lock symbol lights up when the shaver has been locked to avoid unintended starting of the motor (e.g. for storing in a suitcase).

Using the shaver (see fig. A)

Press the on/off switch (4) to operate the shaver.

Tips for a perfect dry shave

1. Always shave before washing your face.

2. At all times, hold the shaver at the right angle (90°) to your skin.

3. Stretch your skin and shave against the direction of your beard growth.

MultiHeadLock switch (head lock) To shave hard-to-reach areas (e.g. under the nose) slide the MultiHeadLock switch (3)

down to lock the shaver head. The shaver head can be locked in five positions. To change position, move the shaver head with your thumb and forefinger back or forth. It will automatically click into the next position. Only models with Clean & Charge Station: For automatic cleaning in the Clean&Charge Station the head lock should be released.

Long hair trimmer

To trim sideburns, moustache or beard press the release button (8) and slide the long hair trimmer (6) upwards.

Travel lock

• Activation: By pressing the on/off switch (4) for 3 seconds the shaver is locked. This is confirmed by a beep sound and the lock symbol in the display. Afterwards the display turns off.

• Deactivation: By pressing the on/off switch for 3 seconds the shaver is unlocked again.

Manual cleaning of the shaver (see fig. B/C)

Cleaning under running water

• Switch on the shaver (cordless) and rinse the shaver head under hot running water until all residues have been removed. You may use liquid soap without

abrasive substances. Rinse off all foam and let the shaver run for a few more seconds.

• Next, switch off the shaver, press the release buttons (2) to remove the Foil & Cutter cassette (1) and let it dry completely.

• If you regularly clean the shaver under water, then once a week apply a drop of light machine oil (not included) on top of the Foil & Cutter cassette and the long hair trimmer.

The shaver should be cleaned after each foam usage.

Cleaning with a brush

• Switch off the shaver. Remove the Foil & Cutter cassette (1) and tap it out on a flat surface. Using the brush, clean the inner area of the pivoting head. Do not clean the cassette with the brush as this may damage it!

The Foil & Cutter cassette can be attached either way. There is no impact on the shaving performance.

Clean&Charge Station (not with all models)

The Clean&Charge Station has been developed for cleaning, charging, lubricating, drying and storing your Braun shaver.

DANGER : FLAMMABLE. CONTENTS MAY CATCH FIRE. Do not smoke. Use only in well-ventilated areas. Keep away from flames such as pilot light, and any object that sparks such as electric motor. Keep locked up. KEEP OUT OF REACH OF CHILDREN. CAUTION : MAY IRRITATE EYES. Do not get in eyes. FIRST AID TREATMENT: Contains ethanol. If swallowed, call a Poison Control Centre or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes.

12 Station power socket 13 Lift button for cartridge exchange 14 Station-to-shaver contacts 15 Clean&Charge Station display 15a Level indicator 15b Status light 15c Cleaning program indicators 16 Start button 17 Cleaning cartridge (not with all models)

Installing the Clean&Charge Station (see fig. D)

• Press the lift button (13) at the rear side of the Clean&Charge Station to lift up the housing.

• Hold the cleaning cartridge (17) down on a flat, stable surface (e.g. table).

• Carefully remove the lid from the cartridge.

• Slide the cartridge from the rear side into the base of the station until it snaps into place.

• Slowly close the housing by pushing it down until it locks.

• Connect the station to an electrical outlet by snapping the special cord set (10) into

the power socket (12).

Charging the shaver in the Clean&Charge Station (see fig. D) Insert the shaver head with the front showing and released head lock into the cleaning

station. Important: The shaver needs to be dry and free from any foam or soap

residue!

The contacts (7) on the back of the shaver need to align with the contacts (14) in the station. Push the shaver in the correct position. A beep sound confirms that the shaver sits properly in the station. Charging will start automatically.

Cleaning the shaver (see fig. D) When the cleaning indicator

Clean&Charge Station, as described above and press the start button (16). The hygiene status will be analyzed and is shown by the cleaning program indicators

(15c) in the Clean&Charge Station display. If status light (15b) does not shine (Clean&Charge Station switches to stand-by after

ca. 10 minutes), press start button twice. Otherwise cleaning will not start. For best

shaving results, we recommend cleaning after each shave.

lights up in the shaver display, insert the shaver into the

The cleaning process consists of several cycles, in which cleaning fluid is flushed through the shaver head. Depending on the program selected, the cleaning time takes up to 3 minutes, followed by an active drying phase of about 40 minutes, during which a fan is running.

Afterwards charging will resume, which is indicated in the shaver display. When the shaver is fully charged the display turns off.

Cleaning programs

short economical cleaning

normal level of cleaning

high intensive cleaning

Removing the shaver from the Clean&Charge Station (see fig. E) Hold the Clean&Charge Station with one hand and tilt the shaver slightly to the front to

release it. Cleaning Cartridge / Replacement (see fig. F) When the level indicator (15a) lights up permanently red, the remaining fluid in the

cartridge is sufficient for about 3 more cycles. When the level indicator blinks red, the cartridge needs to be replaced (about every 3 weeks when used daily).

After having pressed the lift button (13) to open the housing, wait for a few seconds before removing the used cartridge to avoid any dripping. Before discarding the used cartridge, make sure to close the openings using the lid of the new cartridge, since the used cartridge will contain contaminated cleaning solution.

The hygienic cleaning cartridge contains alcohol or isopropanol (specification see cartridge), which once opened will naturally evaporate slowly. Each cartridge, if not used daily, should be replaced after approximately 8 weeks. The cleaning cartridge also contains lubricants for the shaving system, which may leave residual marks on the outer foil frame and the cleaning chamber of the Clean&Charge Station. These marks can be removed easily by wiping gently with a damp cloth.

Accessories

Braun recommends changing your shaver’s Foil & Cutter cassette every 18 months to maintain your shaver’s maximum performance. Available at your dealer or Braun Service Centres:

• Foil & Cutter cassette: 92S/92B

• Cleaning cartridge Clean&Charge Station: CCR

• Braun Shaver cleaner spray

Battery removal

This appliance contains a rechargeable battery. Before disposing of the appliance, disassemble the housing as shown, remove the rechargeable battery and recycle or dispose of properly, according to local guidelines.

Caution: Disassembling the appliance will destroy it and invalidate the warranty.

e r i e

s 5

er i es

ries

The cleaning cartridge can be disposed of with regular household waste.

Subject to change without notice.

For electric specifications, see printing on the special cord set.

Trouble-Shooting

Problem Possible reason Remedy

SHAVER Shaver does

not start when pressing the start button.

Shaver does not charge completely and keeps blinking.

Charging does not start when connected to power socket or put in charging stand / Clean&Charge Station.

1. Travel lock is activated.

2. This appliance can only be operated cordless.

Ambient temperature is out of valid range.

1. Shaver is not placed properly in the charging stand / Clean&Charge Station.

2. Sometimes charging could start delayed (e.g. after long storage).

3. Ambient temperature is out of valid range.

4. Special cord set is not plugged in properly.

1. Press the on/off switch for 3 seconds to unlock the shaver.

2. Unplug the shaver.

Recommended ambient temperature for charging is 41 °F to 95 °F / 5 °C to 35 °C.

1. Contacts of shaver need to align with contacts in the Clean&Charge Station.

2. Wait a few minutes, if charging will start automatically.

3. Recommended ambient temperature for charging is 41 °F to 95 °F / 5 °C to 35 °C.

4. Special cord set needs to snap into place.

Li- ion

Unpleasant smell from the shaver head.

Battery performance dropped significantly.

Shaving performance dropped significantly.

Shaver turns off with fully charged battery.

1. Shaver head is cleaned with water.

2. Cleaning cartridge is in use for more than 8 weeks.

1. Shaver head is regularly cleaned with water but not lubricated.

2. Foil and cutter are worn which requires more power for each shave.

1. Shaving system is clogged.

2. Foil and cutter are worn.

Foil and cutter are worn which requires more power than the motor can deliver. The appliance turns off.

1. When cleaning the shaver head with water only use hot water and from time to time some liquid soap (without abrasive substances). Remove Foil & Cutter cassette to let it dry.

2. Change cleaning cartridge at least every 8 weeks.

1. If the shaver is regularly cleaned with water, apply a drop of light machine oil on top of the foil once a week for lubrication.

2. Replace Foil & Cutter cassette.

1. Soak the Foil & Cutter cassette in hot water with a drop of dish liquid. Afterwards rinse it properly and tap it out. Once dry apply a drop of light machine oil on the foil.

2. Replace Foil & Cutter cassette.

– Replace Foil & Cutter cassette. – Regularly oil the shaving system,

especially when cleaning with water only.

Shaver head is damp.

CLEAN&CHARGE STATION Cleaning does

not start when pressing the start button.

Increased consumption of cleaning fluid.

1. Drain of the Clean&Charge Station is clogged.

2. Cleaning cartridge has been used for quite a while.

1. Shaver is not placed properly in the Clean&Charge Station.

2. Cleaning cartridge does not contain enough cleaning fluid (level indicator blinks red).

3. Appliance is in stand-by mode.

Drain of the Clean&Charge Station is clogged.

1. Clean the drain with a wooden toothpick.

2. The alcohol proportion has decreased while the oil proportion has increased. Remove residue with a cloth.

1. Insert shaver into the Clean&Charge Station (contacts of the shaver need to align with contacts in the station).

2. Insert new cleaning cartridge.

3. Press start button again.

– Clean the drain with a wooden

toothpick.

– Regularly wipe the tub clean.

+ 31 hidden pages