Braun 7526 User Manual

7526
+
2 1 0
k
c
o
l
c
i
t
a
m
o
t
u
3
+
a
Type Modèle Modelo 5493
+ 5301
-
SyncroPro System
SyncroPro 7526
English 4
Français 15
Español 26
Thank you for purchasing a Braun product. We hope you are completely satisfied with your new Braun product. If you have any questions, please call: US residents 1-800-BRAUN-11
1-800-272-8611
Canadian residents 1-800-387-6657
Merci d’avoir fait l’achat d’un produit Braun. Nous espérons que vous serez pleinement satisfait de votre nouveau produit Braun. Si vous avez des questions, veuillez appeler Braun Canada : 1 800 387 6657
Gracias por haber comprado un producto Braun. Esperamos que Ud. completamente satisfecha con su nuevo producto Braun. Si Ud. tiene alguna duda, por favor llame al 01(800) 508-5800
Internet
www.braun.com
5-493-311/00/V-05/G2 USA / CDN / MEX Printed in Germany Imprimé en Allemagne Impreso en Alemania
The world’s # 1 selling foil shavers
Le rasoir à grille le plus vendu au monde
Fabricante mundial # 1 en la venta de rasuradoras de lámina
SyncroPro 7526
S
yn
c
r
o
Pr
o
7
526
Clean &Renew™
10
1
2
3
4 5
6
7 8
9
A
B
13 14
No. 7000
15 16
4
17 18
2 1 0
k
c
o
l
c
i
t
a
m
o
t
u
a
3
+
-
SyncroPro 7526
12
11
19
English
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including the following:
Read all instructions before using this appliance.
DANGER
To reduce the risk of electric shock:
1. Do not reach for an appliance that has fallen into water. Unplug immediately.
2. Do not use while bathing or in the shower.
3. Do not place, store or charge the appliance where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid.
4. When not using for an extended period of time, unplug this appliance from the electrical outlet.
5. Unplug this appliance before cleaning.
6. This appliance is provided with a special cord set with integrated Safety Extra Low Voltage power supply. Do not exchange or manipulate any part of it.
FOR HOUSEHOLD USE SAVE THESE INSTRUCTIONS
4
WARNING
To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Close supervision is necessary when this appliance is used by, on, or near children or invalids.
2. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
3. The shaver should never be exposed to temperatures of less than 32 º F / 0 ºC and more than 105ºF/+40ºC for longer than a few hours. Keep the shaver and cord dry at all times. Do not handle with wet hands. Do not store in a damp environment. To avoid damage do not wind the cord around the appliance. It is important to check the cord for damage periodically particularly at each end where the cord enters the plug.
4. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to a service center for examination and repair.
5. Keep the cord away from heated surfaces.
6. Never drop or insert any object into any opening.
7. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
8. Do not use this appliance with a damaged or broken foil, as serious facial injuries may occur.
9. Always attach plug to appliance first, then to outlet. To disconnect, turn all controls to «off», then remove plug from outlet.
5
210
A Shaver
Your Braun SyncroPro is supplied with a Braun Clean&Renew™ (please see section B).
SmartLogic
The «SmartLogic» electronics inside your shaver ana­lyzes your personal shaving patterns, and then adapts the battery care and cleaning cycles to ensure optimal performance.
Description
1 Foil protection cap 7 Charging light (green) 2 Shaver foil 8 Low charge light (red) 3 Cutter block 9 Pilot light 4 Foil release button 10 Shaver socket 5 Long hair trimmer 11 Special cord set 6 Switch
Charging the shaver
7540
• First char the shaver to an electrical outlet with the switch in position «0» and charge it for at least 4 hours (plug might get warm). The SmartLogic inside your shaver automatically monitors the condition of the batteries as well as the charging/discharging processes and adapts them to your personal shaving patterns.
ging: Using the special cord set, connect
• From now on, the SmartLogic inside your shaver will ensure optimal care of the batteries. If, for instance, it is your habit to never let the batteries get low, the SmartLogic will recognize this, look for a pause when you are likely to not use the shaver and com­pletely discharge and then recharge your shaver to recondition the batteries (every six months at the most, and only when necessary).
• A full charge will give up to 50 minutes of cordless shaving time depending on your beard growth. However, the maximum battery capacity will only be reached after several charging/discharging cycles.
• Best environmental temperature range for charging is 60°F to 95°F / 15 °C to 35 °C.
6
Indicator lights
21
2
a
u
t
o
m
a
t
i
c
l
o
c
k
2
1
3
1
The pilot light shows that the shaver is connected to an electrical outlet.
The green charging light shows that the shaver is being charged. When the rechargeable battery is fully charg­ed, the charging light flashes or goes off. If later on, the charging light comes on again, this indi­cates that the shaver is being recharged to maintain its full capacity.
The red low-charge light flashes when the battery capa­city has dropped below 20%, provided the shaver is switched on. The remaining capacity will then be suffi­cient for 2 to 3 shaves.
Shaving
Switch positions
0 = Off (switch is locked)
Press and push up the switch to operate the shaver:
1 = Shaving with the pivoting head
The pivoting cutting system automatically adjusts to every contour of your face.
2 = Shaving with the pivoting head locked at an angle
(to permit shaving in difficult areas, e.g. under the nose)
3 = The long hair trimmer is activated (for trimming
sideburns, moustache and beard).
+
Shaving with the cord
If the rechargeable battery is discharged, you may also shave with the shaver connected to an electrical outlet via the special cord set. (If the shaver does not run immediately, charge it with the switch on position «0» for approx. 1 minute.
7
Tips for the perfect shave
• It can take up to 14-21 days for your beard to adjust to the new shaving system.
• Shave before washing your face or taking a shower, as skin tends to swell after washing.
• The drier the skin, the closer the shaving results will be.
• Hold the shaver at right angles (90°) to the skin. Stretch your skin and shave against the direction of beard growth.
• To maintain 100% shaving performance replace your foil and cutterblock every 18 month or when worn.
Keeping your shaver in top shape
Automated cleaning
The Braun Clean&Renew™ takes care of all cleaning and lubrication needs of your shaver. Please refer to the separate use instructions.
Manual cleaning
For easy cleaning after each shave, switch the shaver off. Press the release buttons to lift the shaver foil (do not remove the foil completely). Switch on the shaver
10
10
oil
for approx. 5-10 seconds so that the shaved stubbles can fall out. For a thorough cleaning (weekly), remove the shaver foil and tap it out on a flat surface. Using the brush, clean the cutter block and the inner area of the pivoting head. If your skin is very dry and you notice a reduced opera­tion time of the shaver apply a drop of light machine oil onto the shaver foil.
Replacing the shaving parts
To maintain 100% shaving performance, replace your foil and cutter block every 18 months or when worn. Change both parts at the same time for a closer shave with less skin irritation. (Shaver foil and cutter block: part No. 7000)
8
Accessories
Available at your dealer or Braun Service Centres:
Shaver foil and cutter block
(part No. 7000)
Environmental notice
This appliance is provided with a nickel-hydride batteries. They do not contain any harmful heavy metals. Nevertheless, in the interest of recycling raw materials, please do not dispose of this appliance in the household waste at the end of its useful life. Disposal can take place at a Braun Service Center or appropriate collection sites.
Syncro
7000
7000
9
B Clean&Renew™
Braun Clean&Renew™ has been developed to automa­tically clean and charge your shaver. It also serves as a storage unit. For peak performance of your shaver, clean it daily in the Clean&Renew™.
During the automated cleaning process, the shaver is switched on and off at intervals to obtain best cleaning results. Since the specially formulated cleaning fluid also contains a small amount of oil, the cleaning proce­dure also fulfills the lubrication needs of your shaver.
Important
• Only use the special cord set supplied with the shaver.
• In order to avoid any leakage of the cleaning fluid, place the appliance on a flat, stable surface. Be careful not to tip, move suddenly or transport in any way if a cleaning cartridge is installed.
• Do not place the appliance in a mirror cabinet, nor store it over radiators, nor place it on polished or laquered surfaces. Do not expose to direct sunlight.
• The appliance contains highly flammable liquid. Keep it away from sources of ignition. No smoking. Keep out of reach of children. Do not refill cartridge. Use only original Braun refill cartridge.
• When cleaning the shaver, its protection cap should be removed.
Description
12 Lift button for cartridge exchange 13 Release button 14 Contact bow 15 Operation mode selector 16 «clean» light: cleaning process indicator 17 «charge» light: charging process indicator 18 «cartridge» light: cartridge replacement indicator 19 Cleaning cartridge
10
Before using Clean&Renew™
2
1
old
new
new
7526
a
u
t
o
m
a
t
i
c
l
o
c
k
3
2
1
0
o n /
o ff
c le
a n
c h a
r g e
c a r
t r i d
g e
7526
a
u
t
o
m
a
t
i
c
l
o
c
k
3
2
10
7526
For the fi cord set directly to the shaver, charge it for 4 hours and shave at least once. Only then can the shaver be cleaned or recharged in the Clean&Renew™.
If the rechargeable batteries are discharged, select the combined «clean + charge» program rather than the «clean» program alone.
Installing the cartridge
Press the lift button (12) to open the housing.
Hold the cartridge down on a flat, stable surface (e.g. table). Carefully remove the lid from the cartridge. Slide the cartridge into the base as far as it will go.
Slowly close the housing by pushing it down until it locks.
Replacing the cartridge
After having pressed the lift button to open the housing, wait for a few seconds before removing the used car­tridge.
Before discarding the used cartridge, make sure to close the openings using the lid of the new cartridge, since the used cartridge will contain contaminated cleaning solution.
rst charge of the shaver, connect the special
Operating your Clean&Renew™
• Use the special cord set from your shaver and plug it into the Clean&Renew™ and then into an electrical outlet. Open the contact bow (13) by pressing the release button (14). After shaving, switch the shaver off and place it upside down into the Clean&Renew™ (without having released the shaver foil).
• Select the operation mode by toggling with the mode selector (15): clean (about 15 min) clean + charge (about 75 min) charge (about 60 min)
The corresponding lights will come on. (With cord shavers, only the «clean» function can be selected.)
11
Loading...
+ 24 hidden pages