Branson 2000X User Manual

SERIES TOUCH SCREEN

QUICK START USER’S GUIDE

energy / time

POWER

Press to turn the
system On and Off.
The button depresses
and it lights to indicate
power is On.

RESET

Press to reset
Alarms.

POWER LEVEL % INDICATOR

Indicates the power used either during the
last weld cycle or when TEST is running.

Main Menu Pg1of2

Reset

Test

100 %

80 %

60 %

40 %

20 %

0 %

Weld Setup

View Current Setup

Horn Down

Weld Results Main Menu Weld Setup

TOUCH SCREEN

On power up, after the Windows OS is loaded, the
the Language Selection screen will be displayed.
Here you may select the language to be displayed on
the Power Supply menus. The Visual Quality screen
will be shown briefly. Then either the Weld Results or
Main Menu screen will be displayed. The screen
displayed is chosen in System Configuration >Start
Screen. All other menus are accessed from the
Navigation Buttons at the bottom of all screens.

System Configuration

System InformationScreen Setup

Diagnostics

Weld History

>>

Graphs

energy

NUMERIC KEYPAD

Used for numeric and alphanumeric entry of
values for selected parameters.
In Numeric mode, INC (+), and DEC (-) become
inactive when a number digit is pressed. Once
the INC or DEC buttons are pressed, the number
digits are inactive. The INC or DEC will increment
or decrement the Current Value field by 1 each
time it is pressed.

FREQ OFFSET

Current Value

New Value

Freq Offset[Hz]

-

Min Value
Max Value+0+400

Weld Results Main Menu Weld Setup Graphs

+0

ABC

/#

1

GHI JKL

4 5

PQR

7
+

INC

ESC ENT

DEF

2 3

MNO

6

STU VWX

8

9

YZ

-

DEC

0

.

TEST

Press to display a
menu to test the
ultrasonic power supply,
horn, booster, and
converter.

Preset1 Tm=1.000s

Time

Cycle#

(s)

18 1.000 50 160.9 2

17 1.000 51 162.1 1

16 1.000 52 161.8 3

15 1.000 50 163.4 -1

14 1.000 55 163.2 -1

13 1.000 57 163.1 1

12 1.000 64 152.3 1

Weld Results Main Menu Weld Setup Graphs

WELD RESULTS

Displays 4 parameters
from the last 7 weld
cycles to be monitored
from Weld Results screen.

Freq Chg
(Hz)

Column Setup

Print

Weld Results

RUN:TIME = 1.000

*Pk Pwr
(%)

*Energy
(J)

MAIN MENU

Use this menu to
access all functions
on the Main Menu.
(shown above)

WELD SETUP

Use this menu to
access the 3 pages
of parameters on the
Weld Setup Menu.

WELD SETUP Pg1of3

Weld Mode > Time

*Amplitude > FIXED

*Amplitude = 100%

Pretrigger > Off

Weld Results

Main Menu

GRAPHS

Access graphs to view
or print from this menu.

Weld Time = 0.567 s

Hold Time > Off

Afterburst = 0.894 s

Pwr Match Curve > Off

>>

Weld Setup Graphs

ESC

Touching ESC will
erase all digits in the
in the New Value field.

ENT

Touching ENT will
close the pop-up and
return you to the Weld
Setup screen.

Graphs

View Graphs

*Auto Scale

*X Scale

Auto Refresh

Weld Results Main Menu Weld Setup

Pg1of2

Graphs

*Applies to 2000X ea only

2000X ea/t Touch Screen
Quick Start User Guide v. 11.0 Rev. 5
EDP 100-412-175 March 2011

Copyright © Branson Ultrasonics Corp.

Basic Menu Map

ea/t

Power Supply

Power Up

The Power Supply will display the Language Selection screen at Power Up.
On this screen you may select the language to be displayed on the Power Supply menus.

WELD RESULTS

Preset 0

Screen displays, (for the last 7 weld cycles),
the 4 parameters selected from Column
Setup in the Weld Results Screen.

Run Time 1.000

PRESETS

Recall
Save
Clear
Verify

DIAGNOSTICS

Digital Tune
Start Freq
Horn Signature
Cold Start
F Memory [ ]
F Actual [ ]

Run Seek
Clear Store

HORN DOWN

PRINT MENU

Printing =
Printer Offline
Abort Printing
Choose Printout >
Setup Printer >

SYSTEM INFO

PS Life =
Overloads =
Gen Alarm =
Frequency & Power=
P/S =
Actuator =
Control Level =
S/W Version =
P/S S/N =
SBC Version =
Welder Addr =
Cyl Stroke =
Cyl Dia =
View IP addr =
P/S Version =
P/S Presets =

OR

(Set Start Screen
in Sys Config)

MAIN MENU

Save/Recall Presets
Diagnostics
System Configuration
Horn Down
Print Menu
System Information
Screen Setup
Sequencing Presets
Print Now
Weld History
View Current Setup
Weld Setup
View Quality Screen

PRINT NOW

Setup
Weld Data
*Weld History
*Power Graph
*Amp Graph
*Freq Graph

SEQUENCING

Sequencing
Erase Sequence
Define/Edit Sequence

SCREEN SETUP

Screen Alignment
Color Setup

SYS CONFIG

Units =
Password =
Start Screen =
RS232 >
USB Data =
Welder Addr =
Cycle Counter >
Gen Alarm Reset =
Time >
Date >
Beepers >
P/S Settings >
Amp. Control =
Act Settings >
Extra Cooling =
Ext Presets =
User I/O >
Bargraph Scales >
Digital Filter =
Freq Offset =
Column Setup >
Screen Setup >
Windows Setup
Hand Held

WELD SETUP

Weld Mode >
Hold Time =
Ext U/S Delay =
Amplitude =
Pretrigger >
Afterburst >
Energy Brake =
Post Weld Seek =
Frequency Offset >
Write In Fields >
Power Match Curve =
Save/Recall Presets =
Visual Quality Setup >
†Weld Time =
†Cycle Aborts >
†Timeout =
†Scrub Time =
†Scrub Amp =
Digital UPS >
*Amplitude >
*Control Limits >
*Suspect Limits >
*Reject Limits >
*†Weld Energy =
*†Peak Power =

*Applies to 2000X ea only
†Availability dependant on Weld Mode

The “>” symbol indicates additional
sub-menus available.

2000X ea/t Touch Screen
Quick Start User Guide v. 11.0 Rev. 5
EDP 100-412-175 March 2011
Copyright © Branson Ultrasonics Corp.

GRAPHS

View Graphs
Auto Refresh
*Auto Scale
*X Scale

VIEW GRAPHS

Power
Frequency
Amplitude