Brady Facility Marking Tape Catalog Page

Facility Marking Tape

Create a visual workplace

with facility and oor

marking products

Visual Workplace is a lean concept that emphasizes
putting critical information at the point of use.
Companies that incorporate lean visuals throughout
their facility are proven to have higher productivity,
reduced waste, and improved safety.

Visuals can be something as simple as a line,
shape or color band — whatever employees
can understand at a glance. Or visuals can
include signs, labels, displays and more.

Facility Marking Tape

OSHA regulations now include aisle marking

OSHA has recently began requiring, or implying, the need for marking and color coding.

OSHA - Use of Mechanical Equipment

1910.176(a) Where mechanical handling equipment
is used, sufficient safe clearances shall be allowed for
aisles, at loading docks, through doorways and wherever
turns or passage must be made. Permanent aisles and
passageways shall be appropriately marked.

OSHA - Letter of Interpretation

1910.22(b) The lines used to delineate aisles may be any
color so long as they clearly define the area considered as
aisle space. The lines may be composed of dots, square,
strip or continuous. The recommended width of aisle
markings varies from 2 in. to 6 in., therefore any width 2 in.
or more is considered acceptable.

OSHA - Means of Egress

1910.35 OSHA will deem an employer demonstrating
compliance with the exit route provisions of NFPA 101, Life
Safety Code, or the exit route provisions of the IFC 2009,
to be in compliance with 190.34, 1910.36 and 1910.37.

IFC - International Fire Code 2009

1024.1 Approved luminous egress path markings
delineating the exit path shall be provided...having
occupied floors located more than 75 ft. above the lowest
level of fire department vehicle access.

1024.2.1 A solid and continuous stripe shall be applied to
the horizontal leading edge of each step and shall extend
the full length of each step.

1024.2.4 Perimeter and floor mounted demarcation
lines shall be placed within 4 in. of the wall and extend
to within 2 in. of the markings on the leading edge of
landings. Demarcation lines shall be 1 in. to 2 in. wide with
interruptions not exceeding 4 in.

294

ToughStripe® Floor Marking

ToughStripe Max Floor Marking Tape (B-543)

• Resistance to cuts and scrapes in high-traffic forklift and industrial-vehicle
traffic areas due to its increased thickness (1.25 mm)

• Aggressive adhesive performance to floor, but easily removes in one piece

• Tapered edges minimize "pick points" and traffic bumps

• Service temperature range of 0° F to 140° F (-18° C to 60° C)

2 in. x 100 ft. 3 in. x 100 ft. 4 in. x 100 ft.

Yellow 149629 149636 149643
Ylw / Blk Striped 149630 149637 149644
Red 149634 149641 149648
Orange 149635 149642 ­White 149633 149640 149647

Green 149632 149639 149646
Blue 149631 149638 149645

Toughstripe Floor Marking Tape (B-514)

• Ideal for marking aisles, passageways and storage locations, and pointing
out important safety equipment and egress paths

• Exceeds OSHA and ANSI safety standards for clean, dry non-slip surfaces

• 0.2 mm thickness and service temperature 0° F to 140° F (-18° C to 60° C)

• Custom colors available

new

Colors

2 in. x 100 ft. 3 in. x 100 ft. 4 in. x 100 ft.

Yellow 104312 104342 104372
Red 104313 104343 104373
Orange 104316 104346 104376
White 104311 104341 104371

Green 104315 104345 104375
Blue 104314 104344 104374
Purple 134086 134087 134088
Brown 134089 134090 134091
Grey 134092 134093 134094
Black 104310 104340 104370

Stripes

2 in. x 100 ft. 3 in. x 100 ft. 4 in. x 100 ft.

Ylw / Blk 104317 104347 104377

Rd / Wht 104318 104348 104378

Rd / Ylw 132430 132431 132432

Org / Blk 132433 132434 132435
Wht / Blk 104319 104349 104379

Grn / Wht 132436 132437 132438

Blu / Ylw 132439 132440 132441

ToughStripe Floor Tape Applicator

• One applicator for all of your floor marking tapes — including
thick, heavy-duty tapes and thin, temporary tapes

• Adjusts to fit 2 in. to 4 in. tape widths

• Lightweight, ergonomic design makes tape application easy

• Applicator winds tape liner onto an extra core as you go
to make clean up fast and easy

• Small footprint fits in tight spaces

Checkers

2 in. x 100 ft. 3 in. x 100 ft. 4 in. x 100 ft.

Rd / Wht 121916 121917 121918

Blk / Wht 121913 121914 121915

Overlaminate Tape

Catalog # Description Size

142134 Overlaminate 1 in. x 50 ft.
142136 Overlaminate 1.125 in. x 100 ft.
142135 Overlaminate 2 in. x 50 ft.
142137 Overlaminate 2.250 in. x 100 ft.
142138 Overlaminate 3 in. x 100 ft.
142139 Overlaminate 4 in. x 100 ft.

new

Facility Marking Tape

Catalog # Description Qty

150852 ToughStripe Floor Tape Applicator 1

Adjusts to fit 2 in. to 4 in. tape widths

295

295

ToughStripe® Floor Marking

ToughStripe Floor Marking Die-cut Shapes

• All the durability and high visibility of ToughStripe Floor Marking Tape, but in die-cut shapes

Facility Marking Tape

Dots

3.5 in. Dia.

Yellow 104403
Red 104400
White 104405

Green 104401
Blue 104402
Black 104404

350/roll

Corner Marks

2 in. x 5 in.
20/pack

Yellow 104433 104445 104457
Red 104430 104442 104454
White 104435 104447 104459

Green 104431 104443 104455
Blue 104432 104444 104456
Black 104434 104446 104458

3 in. x 8 in.
20/pack

4 in. x 10 in.
20/pack

Arrows

2 in. x 5 in.
100/pack

Yellow 104415 104421 104427
Red 104412 104418 104424
White 104417 104423 104429

Green 104413 104419 104425
Blue 104414 104420 104426
Black 104416 104422 104428

3 in. x 8 in.
100/pack

4 in. x 10 in.
100/pack

Center Marks

2 in. x 5 in.
20/pack

Yellow 104469 104475 104481
Red 104466 104472 104478
White 104471 104477 104483

Green 104467 104473 104479
Blue 104468 104474 104480
Black 104470 104476 104482

3 in. x 8 in.
20/pack

4 in. x 10 in.
20/pack

Pre-Spaced ToughStripe Shapes

Quickly lay straight, evenly spaced shapes. Simply lay down the continuous tape,
then remove the clear transfer tape. No need to apply markings one by one.

3.5 in. x 100 ft.
55 dots/18 in. apart

Yellow 104523 104529 104556
Red 104521 104526 142179
White 104522 104555 142177

Green 104520 104527 142181
Blue 104524 104528 142180
Black 104525 104554 142178

2 in. x 5 in. x 100 ft.
52 arrows/18 in. apart

2 in. x 8 in. x 100 ft.
46 dashes/18 in. apart

Footprints

10 ft. x 3.5 in.
5 right and 5 left/pack

Yellow 104409
Red 104406
White 104411

Green 104407
Blue 104408
Black 104410

Divider Marks

2 in. x 5 in.
20/pack

Yellow 104439 104451 104463
Red 104436 104448 104460
White 104441 104453 104465

Green 104437 104449 104461
Blue 104438 104450 104462
Black 104440 104452 104464

3 in. x 8 in.
20/pack

4 in. x 10 in.
20/pack

296

Pre-Printed ToughStripe Tape

Stock or custom legends available (18 character limit)

Legend Color 2 in. x 100 ft. 3 in. x 100 ft. 4 in. x 100 ft.

QA Inspection Area Blk on Org 121364 121365 121366
Caution ESD Area Blk on Ylw 121367 121368 121369

Print-On-Demand ToughStripe Tape (B-483)

ToughStripe is available as a printable material for several of Brady's printers,
allowing you to create custom floor labels for your facility. Simply print desired
label from a select Brady printer, position label on floor and apply included
B-634 polyester overlaminate for print protection.

Benchtop printers
See page 49

BMP®71 Portable Printer
See page 152