Bradley Corporation TMV25 User Manual
• Lead-Free Brass Design
NSF/ANSI 372
†
• Reliable Liquid-Filled Thermostat with 10 year warranty
• Integral Strainer Checkstops on Inlets
• Adjustable Set Point within Temperature Range
• Accurate Temperature Control
• Positive Shutoff of Hot Supply When Cold Supply is Lost
• Easy Installation and Serviceability
• Dirt and Lime Resistant
• Factory Assembled and Tested
• Cabinet Features:
– 18 Gauge Body & Door – Inlet/Outlet Knock-Out Holes for Mounting Flexibility
– Left-Hand Hinge – Stainless Steel or Baked White Enamel Finishes
– Cylinder Lock – Surface-Mounted or Recessed Style with Flange
TMV25
Standard Thermostatic Mixing Valves
Lead Free †
Valve Specifications
Maximum Operating Pressure
125 PSI (860 kPA)
Maximum Inlet Temperature
200° F (93° C)
Temperature Range Set Point
Std.
Low
High
85° F (29° C) to 135° F (57° C)
50° F (10° C) to 100° F (38° C)
100° F (38° C) to 150° F (66° C)
† Wetted surface contains less then .25% lead
Standard product selections contained within this document are third party
CERTIFIED to NSF/ANSI 372 meeting the Lead-Free content requirement. Any
product configured with custom options will be COMPLIANT with NSF/ANSI
372 meeting the Lead-Free content requirement.
110° F (43° C)
80° F (27° C)
130° F (54° C)
Certified to
TMV25 (Part No. S59-2025)
Flow Capacities – GPM (L/Min)
Model
S59-2025
* Recirculation system only (See diagram on Page 2). When properly installed near
the hot water source with a continuously operating recirculation pump, the valve will
maintain set temperature with a .5 GPM (2.0 L/Min) draw from the plumbing system.
Min*
Flow
2.0
(8)
5
(.5)
5.5
(30.0)
Pressure Drop – PSI (Bar)
10
15
(1.5)
13.0
(60.0)
20
(2.0)
16.0
(73.0)
(1.0)
9.0
(47.0)
30
(2.5)
20.0
(84.0)
45
(3.0)
25.0
(94.0)
Code Compliance and Certifications
ASSE 1017 & cUPC certified. Complies with California Lead Plumbing Law.
Optional Selections
Finish
¨C
Thermostat
¨L
¨H
Thermometer
¨T
Bracket
¨B
Piped Assembly
¨P
¨N
Cabinets
¨SS
¨RS
¨SE
¨RE
¨W
Chrome Plated
Low Range Thermostat
High Range Thermostat
Dial Thermometer
Wall Mounting Bracket
Piped Assembly with Inlet and Outlet Shutoff
Piped Assembly with Outlet Shutoff
Surface Mount Stainless Steel
Recessed Stainless Steel
Surface Mount White Enamel
Recessed White Enamel
Plexi-glass Window in Door
60
(4.0)
29.0
(112.0)
Page 1 of 4 8/19/2014
This information is subject to change without notice.
Bradley_TMV_Standard_TMV25
P.O. Box 309, Menomonee Falls, WI 53052-0309
© 2015 Bradley
800 BRADLEY (800 272 3539) +1 262 251 6000
bradleycorp.com
Recirculation Diagram
Cold
Water
Check Valve (Typ)
Cold
Heat
Trap 28”
Drop
Hot
Alternate
Recirculation
(More than 5 GPM)
Balancing
Valve (Typ)
TMV25
Standard Thermostatic Mixing Valves
Tempered Water Flow
Check Valve
Temperature
Switch
Recirculated
Return
Flow
Recirculating
Pump
Tempered Water
(mm)
Water
Heater
Storage
Tank
Dimensions
1-3/4"
(46)
Page 2 of 4 8/19/2014
This information is subject to change without notice.
Bradley_TMV_Standard_TMV25
9"
(229)
3/4" NPT
2-7/8"
(74)
3/4" NPT
8-3/4"
(222)
6-1/2"
(165)
800 BRADLEY (800 272 3539) +1 262 251 6000
3/4" NPT
© 2015 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
bradleycorp.com
Loading...