Photo is of
RE250S6
Residential Upright
Electric Water Heater
The Upright Electric Models Feature:
■ Fully Automatic Controls—Fast acting surface-mount thermostat with high
limit energy cut-off (manual reset) for safety.
■ Low Restrictive Brass Drain Valve—Durable tamper proof design.
■ Direct Heat Transfer with Immersed Elements—Transfers heat directly
and efficiently to the water. Screw-in style.
■ Factory-Installed Hydrojet
reducing device that also increases first hour delivery of hot water while
minimizing temperature build-up in tank.
■ Vitraglas
®
Lining—An exclusively engineered enamel formula that provides
superior tank protection from the highly corrosive effects of hot water. This
formula (Vitraglas
®
) is fused to the steel surface by firing at a temperature of
over 1600°F (871°C).
■ Insulation System—Non-CFC foam covers the sides and top of the tank,
reducing heat loss. This results in less energy consumption, improved
efficiencies, and jacket rigidity. Blanketed models additionally use a supplied
flexible fiberglass insulation blanket.
■ Water Connections— 3⁄4" (19mm) NPT factory-installed true dielectric
fittings extend water heater life and simplify water line connections.
■ Factory-Installed Heat Traps —Design incorporates a flexible disk that
reduces heat loss in piping and eliminates the potential for noise generation.
■ Protective Magnesium Anode Rod—Provides added protection against
corrosion for long-term, trouble-free service.
■ Simultaneous and Non-Simultaneous Operation Available—
Simultaneous operation indicates when both elements (if equipped) are being
heated at the same time. Non-Simultaneous operation indicates when one
element is being heated at a time.
■ Voltages Available—120V, 208V, 240V, 277V, 480V.
■ Single Phase or Three Phase Operation Available—120V & 277V may
only be wired for single phase operation.
■ T&P Relief Valve—Installed.
■ Design evaluated by ETL in accordance with Part 280.707(d) of HUD
Mobile Home Construction and Safety Standards for Energy Efficiency.
®
Total Performance System—Sediment
Copper Screw Type Immersion Element
(INCOLOY® type immersion element available upon request)
6 or 10-Year Limited Tank Warranties / 6 or 10-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada, and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the warranty included with the heater.
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526;
6,684,821; 7,334,419; 7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888;
5,988,117; 7,621,238; 7,650,859; 5,761,379; 7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845;
2,504,824; 2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515; 2,476,685; 2,239,007; 2,092,105; 2,107,012. Vitraglas
®
and Hydrojet® are registered trademarks of Bradford White® Corporation.
1201-E-0720
Residential Electric Water Heater
Upright Models C.E.C. Listed
Model
Number
RE330S6
RE240S6†
RE340S6
RE340T6
RE350S6
RE250S6†
RE250T6
Model
Number
RE330S6
RE240S6†
RE340S6
RE340T6
RE350S6
RE250S6†
RE250T6
Nominal
Capacity
U.S.
Gal.
30
40
40
40
50
50
50
Nominal
Capacity
Gal.
Liter
114
151
151
151
189
189
189
Imp.
Gal.
25
33
33
33
42
42
42
DOE
Rated
Storage
Volume
(Gal.)
27
36
36
36
45
45
45
DOE
Rated
Storage
Volume
(Liters)
102
136
136
136
170
170
170
First
Hour
Rating
(Gal.)
43
48
49
53
60
60
64
First
Hour
Rating
(Liters)
163
182
186
201
227
227
242
Uniform
Energy
Factor
0.92
0.91
0.91
0.92
0.92
0.92
0.92
Uniform
Energy
Factor
0.92
0.91
0.91
0.92
0.92
0.92
0.92
Recovery at
90°F Rise*
U.S.
GPH
21
21
21
21
21
21
21
Recovery at
50°C Rise*
Liters/
Hour
79
79
79
79
79
79
79
Imp.
GPH
18
18
18
18
18
18
18
A
Floor to
Top of
Heater
in.
11
46
/16
473/16
473/16
603/16
473/16
473/16
59
A
Floor to
Top of
Heater
mm.
1186
1199
1199
1529
1199
1199
1499
B
Jacket
Dia.
in.
20
20
22
20
24
22
20
B
Jacket
Dia.
mm.
508
508
559
508
610
559
508
C
Floor to
Water
Conn.
in.
15
48
/16
497/16
497/16
627/16
497/16
497/16
601/4
C
Floor to
Water
Conn.
mm.
1243
1256
1256
1586
1256
1256
1530
D
C/L of
Water
Conn.
in.
8
8
8
8
8
8
8
D
C/L of
Water
Conn.
mm.
203
203
203
203
203
203
203
E
Floor to
T&P
Conn.
in.
15
48
497/16
497/16
627/16
497/16
497/16
601/4
E
Floor to
T&P
Conn.
mm.
1243
1256
1256
1586
1256
1256
1530
† Models include supplied insulation blanket (2" thick). Dimensions in charts above do not include blanket thickness.
For 10 year models, change suffix “6” to “10”.
* Based on 4500W/4500W, Non-Simultaneous operation.
Uniform Energy Factor and First Hour Rating is based on the latest AHRI directory listings.
G
Water
Conn.
NPT
in.
/16
Water
Conn.
NPT
mm.
19
19
19
19
19
19
19
Approx.
Shipping
Weight
3
/4
3
/4
3
/4
3
/4
3
/4
3
/4
3
/4
G
lbs.
100
123
114
125
144
143
130
Approx.
Shipping
Weight
kg.
45
56
52
57
65
65
59
Wattage
Limitations for
Simultaneous
Operation
1500W / 1500W
2000W / 2000W
2500W / 2500W
3000W / 3000W
3500W / 3500W
4000W / 4000W
4500W / 4500W
5000W / 5000W
5500W / 5500W
6000W / 6000W
Wattage
1500W
2000W
2500W
3000W
3500W
4000W
4500W
5000W
5500W
6000W
Voltage
120V
208V
240V
yes
yes
yes
yes
yes
yes
yes
yes
277V
yes
yes
yes
yes
yes
yes
yes
yes
yes
no
yes
yes
yes
yes
yes
yes
no
yes
no
no
no
yes
90
100
120
7
6
9
8
11
10
14
12
16
18
21
23
25
28
10
14
12
16
14
19
15
21
17
23
19
25
21
yes
no
no
no
no
no
no
no
no
no
Recovery
GPH Temperature Rise °F
60
80
10
8
14
10
17
13
21
15
24
18
28
21
31
23
34
26
38
29
41
31
5
7
9
480V
yes
1500W / 1500W
yes
2000W / 2000W
yes
2500W / 2500W
yes
3000W / 3000W
no
3500W / 3500W
yes
4000W / 4000W
yes
4500W / 4500W
yes
5000W / 5000W
no
5500W / 5500W
yes
6000W / 6000W
Wattage
1500W
2000W
2500W
3000W
3500W
4000W
4500W
5000W
5500W
6000W
Wattage
Limitations for
Operation
LPH Temperature Rise °C
34
45
38
30
53
38
64
49
79
57
91
68
106
79
117
87
129
98
144
110
155
117
120V
208V
yes
yes
yes
yes
no
no
no
no
no
no
Recovery
50
26
34
42
53
61
68
79
87
95
106
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
56
23
30
38
45
53
61
72
79
87
95
Voltage
240V
277V
480V
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
no
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
no
yes
yes
yes
67
19
26
34
38
(GPH based on
45
Non-Simultaneous
53
operation, when
57
Simultaneous
64
operation the GPH
72
will approximately
79
double.)
B
D
8"
(203mm)
no
G
no
G
Anode
RE250T6
Only
C&E
A
General:
Meets NAECA Requirements
All models ETL listed. These heaters are wired inter-locking (Non-Simultaneous, Single Phase) 240V with two 4500W elements, unless
otherwise specified. All water and electrical connections are 3/4" (19mm) NPT. All models certified at 300 PSI test pressure (2068 kPa) and
150 PSI working pressure (1034 kPa.).
Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.
For field service, contact your professional installer or local Bradford White sales representative.
Sales 800-523-2931 n Fax 215-641-1612
Technical Support 800-334-3393
Warranty 800-531-2111
n
n
Email techserv@bradfordwhite.com
Email warranty@bradfordwhite.com
International: Telephone 1-215-641-9400 n Email international@bradfordwhite.com / www.bradfordwhite.com
©2020, Bradford White Corporation. All rights reserved.
Printed in U.S.A.1201-E-0720