Bradford White RC2PV50H6N User Manual
High Efficiency eF Series
®
Residential Power Vent Gas Water Heater
Photo is of
RC2PV50H6N
FEATURING:
The Residential ef Series® Model features:
®
■ ENERGY STAR
Qualified—Meets or exceeds requirements for ENERGY STAR® per
the latest ENERGY STAR® criteria revision, as well as most utility rebate programs.
■ Vertical, Dual-pass Heat Exchanger System—Highly efficient, helical-finned 5"
(127mm) primary heat exchanger tube and three, stainless steel baffled, 2" (51mm)
secondary heat exchanger tubes.
-- Vertical design eliminates corrosion protection challenges of condensing water heaters
that utilize less durable heat exchanger designs.
■ Self-priming Condensate Tee—No need for trap installation. Internal condensate trap
height appropriate for condensate pump use where necessary.
■ Power Vent—Powerful yet quiet design for greater resistance to outside winds and
greater vent lengths for difficult venting situations through the roof or side wall. 10 ft.
(3m) power cord included (120 VAC).
■ Horizontal and Vertical Venting—With 2", 3" or 4" (51mm, 76mm or 102mm) PVC,
ABS, CPVC, or PP.
■ Bradford White ICON System
™
—Intelligent gas control with spark to pilot ignition
system eliminates the constant burning pilot. This results in savings of pilot gas during
standby periods (120 VAC).
-- Enhanced Performance—Proprietary algorithms provide enhanced First Hour Rating
and tighter temperature differential.
-- Advanced Temperature Control System—Microprocessor constantly monitors and
controls burner operation to maintain consistent and accurate water temperature levels.
-- Intelligent Diagnostics—An exclusive green LED light prompts the installer during
start-up and provides ten different diagnostic codes to assist in troubleshooting.
-- Pilot On Indication—Flashing green LED provides positive indication that pilot is on.
-- Separate Immersed Thermowell—High-strength advanced polymer composite
thermowell provides isolation between electric temperature sensor and surrounding
water. No need to drain the tank when removing gas valve.
■ Factory-Installed Hydrojet
®
Total Performance System—Sediment reducing device
that also increases first hour rating of hot water while minimizing temperature build-up
in tank.
■ Vitraglas® Lining—An exclusively engineered enamel formula that provides superior
tank protection from the highly corrosive effects of hot water. This formula (Vitraglas
®
) is
fused to the steel surface by firing at a temperature of over 1600°F (871°C).
-- Interior and exterior of the three, 2" (51mm) secondary heat exchanger tubes are
protected with Vitraglas
®
.
■ Insulation System—2" (51mm) Non-CFC foam insulation covers the sides and top
of the tank, reducing heat loss. This results in less energy consumption, improved
efficiencies, and jacket rigidity.
■ Pedestal Base.
■ Water Connections—3⁄4" (19mm) NPT factory-installed true dielectric fittings extend
water heater life and simplify water line connections.
■ 3/4" (19mm) NPT Side Connections.
■ Factory installed Heat Traps—Design incorporates a flexible disk that reduces heat
loss in piping and eliminates the potential for noise generation.
■ Two Protective Anode Rods.
■ T&P Relief Valve—Installed.
■ Low Restrictive Brass Drain Valve.
6 or 10-Year Limited Tank Warranties / 6 or 10-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada, and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the warranty included with the heater.
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526;
6,684,821; 7,334,419; 7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888;
5,988,117; 7,621,238; 7,650,859; 5,761,379; 7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845;
2,504,824; 2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515; 2,476,685; 2,239,007; 2,092,105; 2,107,0122. Vitraglas
®
and Hydrojet® are registered trademarks of Bradford White® Corporation.
1263-A-0418
Liters
High Efficiency eF Series® Residential Power Vent Gas Water Heater
C
R
A
G
F
E
S
K
B
D & L
H
M
M
J
R
High Efficiency Model
NATURAL GAS AND LIQUID PROPANE MODELS
Model
Number
★RC2PV50H6N 50 42
Model
Number
★RC2PV50H6N 67
Model
Number
★RC2PV50H6N 1713 102610
Nominal
Gal.
Capacity
U.S.
Gal.
A
Floor to
Vent
Conn.
in.
7
A
Floor to
Vent
Conn.
mm.
DOE
Rated
Storage
Imp.
Volume
Gal.
(Gal.)
49
Jacket
Dia.
/16 22524
Jacket
Dia.
mm.
in.
BTU/Hr.
76,000
B
B
LP
BTU/Hr.
Input
Input
76,000
C
Vent
Size
in.
2, 3, and 4
C
Vent
Size
mm.
51, 76, and 102
First
Hour
Uniform
Rating
Energy
(Gal.)
Factor
120
0.80
D
Floor to
Floor to
T&P
Conn.
in.
3
/8
46
D
Floor to
Floor to
T&P
Conn.
mm.
1178 19
Recovery at
90°F Rise*
U.S.
GPH
93
E
Floor to
Top of
Gas
Heater
Conn.
in.
5
/8
56
13
E
Floor to
Gas
Top of
Conn.
Heater
mm.
mm.
346 1429
Imp.
GPH
77
F
in.
1
F
Model
Number
LP
LP
U.S.
Imp.
GPH
GPH
77
G
Floor to
Water
Conn.
in.
57
G
Floor to
Water
Conn.
mm.
1448
★RC2PV50H6N 190
H
C/L of
Depth
Water
Conn.
in.
7
/8
32
H
C/L of
Depth
Water
Conn.
mm.
835
93
/4
Propane models feature a Titanium Stabilized Stainless Steel propane burner.
For propane (LP) models, change suffix”N” to “X”.
Uniform Energy Factor and First Hour Rating is based on the latest AHRI directory listings.
H = ENERGY STAR® Qualified.
J
in.
8
J
mm.
203
Nominal
Liter
Capacity
Floor to
Space
Heating Inlet
in.
15
Floor to
Space
Heating Inlet
mm.
397
Rated
Storage
Volume
(Liters)
K
5
/8
K
DOE
185
Heating Outlet
Heating Outlet
kW
Input
22.0
L
Floor to
Space
in.
3
/8
46
L
Floor to
Space
mm.
1178
LP
kW
Input
22.0
M
Water
Conn.
NPT
in.
3
/4
M
Water
Conn.
NPT
mm.
First
Hour
Rating
(Liters)
455
Uniform
Energy
Factor
0.80
R
Space
Heating
Conn. Size
in.
3
/4
R
Space
Heating
Conn. Size
mm.
19
Liters/
Hour
352
S
Gas
Conn.
Size
in.
1
/2
S
Gas
Conn.
Size
mm.
13
Recovery at
50°C Rise*
LP
Liters/
Hour
352
Approx.
Shipping
Weight
lbs.
Approx.
Shipping
Weight
kg.
RC2PV50H6N
Max. Equivalent Length
Min. Equivalent Length
Number 1
of 2
90° Elbows 3
2"
Vent Pipe
†
50 ft.
7 ft.
45 ft.
40 ft.
35 ft.
3"
Vent Pipe4"Vent Pipe
†
†
15 ft.
115 ft.
110 ft.
105 ft.
120 ft.
180 ft.
15 ft.
175 ft.
170 ft.
165 ft.
Subtract 5ft. (1.5m) for each additional 90° elbow.
† For high altitude installations, consult the
installation instructions.
General:
Meets EPACT Requirements.
All gas water heaters are certified at 300 PSI test pressure (2068 kPa) and 150 PSI working pressure (1034 kPa). All water connections are 3/4" NPT
(19mm) on 8" (203mm) centers, all gas connections are 1/2" (13mm). All models design certified by CSA International (formerly AGA/CGA), ANSI standard
Z21.10.3 and peak performance rated.
Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.
Suitable for Water (Potable) Heating and Space Heating. Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into this
system. This unit may NEVER be connected to any existing heating system or component(s) previously used with a non-potable water heating appliance.
Ambler, PA
For field service, contact your professional installer or local Bradford White sales representative.
Sales 800-523-2931 n Fax 215-641-1612
Technical Support 800-334-3393
Warranty 800-531-2111
n
n
Email techserv@bradfordwhite.com
Email warranty@bradfordwhite.com
International: Telephone 1-215-641-9400 n Email international@bradfordwhite.com / www.bradfordwhite.com
©2018, Bradford White Corporation. All rights reserved.
Printed in U.S.A.1263-A-0418
Loading...