Bradford-White M-I-5036FBN User Manual

Energy Saver Gas Water Heater
Photo is of
M-I-5036FBN
"Highest in Subcontractor Satisfaction among Water Heater/Boiler Manufacturers"
Residential Upright
The Atmospheric Vent FVIR Defender Safety System®Models Feature (Except M-
A
arrestor is designed to prevent ignition of flammable vapor outside of the water heater.
Resettable Thermal Switch—Proven and reliable bimetallic switch prevents
burner and pilot operation in case of ongoing flammable vapor burn inside of the combustion chamber or restricted air flow.
Piezo Igniter—Easy and quick lighting of the pilot burner by push button.
Pedestal Base—Rugged and durable base allows easy transport and
positioning, while providing corrosion resistant contact with floor.
Maintenance Free—No regular cleaning of air inlet openings or flame arrestor
is r
Sight Window—Offers a view into the combustion chamber to observe the
operation of the pilot and burner.
All Upright Models Feature:
Factory Installed Hydrojet
sediment reducing device helps prevent sediment build up in tank and increases first hour delivery of hot water. (100 gallon models come equipped with the Hydrojet
Vitraglas
corrosive effects of hot water by an exclusive ceramic porcelain-like coating that provides a tough interior surface for our hot water tanks.
Fully Automatic Controls—Automatic temperature selection at your
fingertips. Built-in energy cut-off switch prevents abnormally high water temperature for extra safety. Built-in gas pressure regulation.
Side Connections—M-I-75S and M-I-100T have 3/4" NPT tappings that
allow easy connections for space heating applications (potable water only).
1" Non-CFC Foam Insulation—Surrounds the tank surface, saving energy
by retarding loss of heat (M-
Water Connections—3⁄4" NPT factory installed true dielectric fittings extend
water heater life and eases installation (M­M-
Factory Installed Heat Traps—Design incorporates a flexible disk that
educes heat loss in piping and eliminates the potential for noise generation
r (Except M-
Protective Magnesium Anode Rod—Provides added protection against
corrosion for long trouble-free service.
3x4 “Snap Lock” Draft Diverter—Allows either 3" or 4" vent connections
with inputs of 40,000 BTU/Hr or less. Over 40,000 BTU/Hr Lock” Draft Diverter.
Flue Baffle—Maximizes the amount of heat absorbed by the tank and
reduces heat loss during standby periods.
Steel Tank—Heavy gauge steel automatically formed, rolled and welded.
T&P Relief Valve—Included.
Brass Drain Valve.
Design Certified by CSA International (formerly AGA and CGA).
I-75S and M-I-100T):
®
echnology Flame Arrestor Design—Flame
T
equired under normal conditions.
®
Total Performance System—Cold water inlet
®
®
Sediment Reduction System).
Lining—Bradford White water heater tanks are protected from the
I-75 has 11⁄4" and M-I-100T has 2").
I-75S has 1" NPT and
I-100T has 11⁄4" NPT factory installed dielectric waterway fittings).
I-75S & M-I-100T).
. has the 4" “Snap
6 or 10-Y
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete copy of the war
Bradford White received the highest numerical score among water heater/boiler manufacturers in the proprietary J.D. Power and Associates/ McGraw-Hill Construction 2006 HVAC and Water Heater/Boiler Subcontractor Satisfaction StudySM.
Study based on 882 r experiences may vary. Visit jdpower.com
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879; 5,277,171; (B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919; Re. 34,534; 7,270,087 B2. OTHER U.S. AND FOREIGN P
Defender Safety System®, ScreenLok®, Vitraglas®and Hydrojet®are registered trademarks of Bradford White®Corporation.
esponses measuring 3 water heater/boiler manufactur
TENT APPLICA
A
ear Limited Tank Warranties / 6-Year Limited Warranty on Component Parts.
ranty included with the heater
ers and measur
TIONS PENDING. CURRENT CANADIAN P
es opinions of subcontractors. Pr
.
esults are based on experiences and perceptions of subcontractors surveyed in May through July 2006. Your
y study r
oprietar
ATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105; 2,409,271.
101-B-0108-A
N
ATURAL GAS AND LIQUID PROPANE GAS
Upright Energy Saver Models
M
eet or exceed ASHRAE 90.1b (current standard) C.E.C. Listed
R
ecovery efficiency ranging up to 78% (M-I-75S and M-I-100T have an 80% recovery efficiency)
Model
N
umber
C
apacity
F
F
loor to Water C
onn.
in.
A
pprox.
S
hipping
Weight
lbs.
E
F
loor to
Gas
C
onn.
in.
A
F
loor to Flue
C
onn.
in.
D
F
loor to
T&P
C
onn.
in.
C
V
ent
Size
in.
B
J
acket Dia.
in.
Gal.
U.S.
Recovery
9
0°F Rise*
30 32,000 1659
1
8
3x4 104493⁄433
M-I-30T6FBN
3
0 30,000
31,000 2
6,000 18 3x4 10038
3
4
571⁄2 4
6
3
4
13 1
348
3
83
1
M
-I-30S6FBN 2
9 40,000 1658 3x4 10949
3
44
2
M-I-303T6FBN
4
0 40,000
3
5,000
3
6,000 18 3x4 12050
5
6
1
2
5
7
3
4
1
3
1
359
3
84
2
M
-I-40T6FBN
40 40,000 2050 3x4 1284142
M-I-403S6FBN
40 50,000
38,000 48,000 18 4 127511⁄2
481⁄2 581⁄2
13 1360
3
453
M-I-404T6FBN
50 40,000 2059
5
8
3x4 145505742
M-I-5036FBN
4
8 40,000
36,000 3
8,000 22 3x4 15340
1
2
58 4
8
1
4
13 1
349
3
44
2
M
-I-50L6FBN 50 50,000 2058
1
2
41505053
M-I-504S6FBN
7
5 76,000
48,000
7
6,000 4 26453
57
6
1
1
4
13
1
663
3
48
2
M
-I-75S6BN
100
Gal.
Imp.
GPH
N
at.
U.S.
GPH
L
P
U.S.
25 2
5
2
4
3
3 33 33 42 4
0 42
6
3 83 85,000 88,000 4
/
/ / /
/
/
/
420595⁄16
563⁄8
5
5
1
4
5
6
5
8
471⁄4
58
553⁄4
2
4
1
2
281⁄4 155⁄86811⁄16 6511⁄1692
28 2
6
3
4
3
4 34 44 34 3
4 44
6
9
GPH
N
at.
Imp.
Input
N
at.
BTU/Hr.
Input
L
P
BTU/Hr.
77
32 2
7
3
7
3
8 40 50 38 4
0 50
8
2 95
GPH
L
P
Imp.
27 2
3
3
1
3
2 33 42 32 3
3 42
6
9 80
M-I-100T6BN
M
-I-30T6FBN
M-I-30S6FBN M
-I-303T6FBN
M-I-40T6FBN
M-I-403S6FBN
M
-I-404T6FBN
M-I-5036FBN
M-I-50L6FBN M-I-504S6FBN
M-I-75S6BN M-I-100T6BN
Model
N
umber
C
apacity
L
iters
F
F
loor to Water Conn.
mm.
A
pprox.
S
hipping
Weight
kg.
E
F
loor to
Gas
Conn.
mm.
A
F
loor to Flue
Conn.
mm.
D
F
loor to
T&P
Conn.
mm.
C
V
ent
Size
mm.
B
J
acket Dia.
mm.
R
ecovery
5
0°C Rise*
1
14 9.4 125
114 8.8
9
.1
7.7 117
1
502
1229
4
06
457
7
6x102
76x102
1
264
9841
3
30
330
1
461
1187
4
7
45 110 11.7 159 151 11.7
10.3
10.6 155
1473 1508
406 457
76x102 76x102
1264 1270
330 330
1435 1467
49
54 151 11.7 155 151 14.7
11.1
14.1 201
1270 1543
508 457
76x102
102
1041 1308
330 330
1232 1486
58
58 189 11.7 159 182 11.7
10.6
11.1 159
1514 1264
508 559
76x102 76x102
1270
1029
330 330
1473 1226
66
69 189 14.7 201
284 22.3
14.1
22.3 310
1486
1619
508
622
102
102
1270
1346
330
406
1448
1518
68
120
379 24.9 25.7 348 1745 718 102
/
/ / / / /
/
1507
1
432
1403 1438 1200 1473 1445
1416
397 1651 191
1
21 102 140 140 148 189 144 151 189
310
6
0 40,000 38,000 3x4 16658
1
45
0
1
2 1
360
3
44
2
M-I-60T6FBN
5
02234 40 33
M-I-60T6FBN
227 11.7 11.1 163 1543 609 76x102 1282 330 1480 75151
359
Nat.
Liters/
H
our
LP
Liters/
H
our
Nat.
kW
I
nput
LP kW
I
nput
Residential Atmospheric Vent Gas Water Heater
E
C
B
A
D
F
8"
All propane heaters are equipped with a cast iron burner. To order a propane heater change suffix “BN” to “CX”. For 10 year models, change suffix from “6” to “10”. *Based on manufacturers rated recovery efficiency.
•Models feature optional top T&P location and must be specified when ordering. I-30S, M-I-50L, M-I-60T, M-I-75S and M-I-100T do not have top T&P option.
Note: M­M-I-100T models feature hand hole cleanout. Floor to space heating return for M­M-I-100T6BN 175⁄8"/448mm Floor to space heating outlet for M-I-75S6BN 53"/1346mm, M-I-100T6BN 505⁄8"/1286mm
Meets NAECA Requirements General
All gas water heaters are certified at 300 PSI test pressure (2068 kPa) and 150 PSI working pressure (1034 kPa). All water connections are 3⁄4" NPT (19mm) on 8" (203mm) centers. The 75 gallon model (284 liters) has 1" (25mm) NPT on 11" (279mm) centers and 100 gallon model (379 liters) has 1 water connections on 16" (406mm) centers. All gas connections ar
All models design cer
Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.
Suitable for Water (Potable) Heating and Space Heating.
Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into this system. This unit may NEVER be connected to any existing heating system or component(s) previously used with a non-potable water heating appliance.
101-B-0108-A
tified by CSA International (formerly AGA/CGA), ANSI standard Z-21.10.1 and/or 10.3 and peak performance rated.
For U.S. and Canada field ser
Sales 800-523-2931 ●Fax 215-641-1670 / T
I-75S6BN 173⁄4"/451mm,
International:
vice, contact your pr
echnical Suppor
Telephone 215-641-9400 ●Telefax 215-641-9750 / www.bradfordwhite.com
echnical Suppor
Sales / T
©2008, Bradford White Corporation. All rights reserved.
• Optional T&P
Location Dimension
e 1⁄2" (13mm).
Ambler
ofessional installer or local Bradfor
t
800-334-3393 ●Fax 269-795-1089 ●W
t
866-690-0961 / 905-238-0100 ●Fax 905-238-0105 / www
, PA
“D” dimension listed
as side/top.
d White sales r
ranty
ar
800-531-2111 ●Fax 269-795-1089
epresentative.
.bradfor
dwhite.com
1
4" (32mm)
Printed in U.S.A.
Loading...