Bowers and Wilkins Signature 7-SE Brochure

S i g n a t u re 7SE

™

Wallmount speaker

Product Summary

●

The Signature 7SE is a true audiophile in-wall monitor. The baffle incorporates a rigid zinc
alloy mid/bass driver chassis for speed and impact and the tweeter has a powerful
neodymium magnet. The crossover components are audiophile-type polypropylene
capacitors, which produce smooth transition throughout the frequency range.

Technical highlights

Kevlar®: B&W developed and patented the method of using Kevlar® for
loudspeaker cones to reduce unwanted standing waves. DuPont originally
created Kevlar® for use in bulletproof vests.

Bass/Mid-range unit: Many of the bass/mid-range drive units in the B&W
custom installation speaker systems use cast chassis. The extra rigidity they
display over the more common press steel chassis improves bass ‘speed’ and
‘impact’.

Aluminium Tweeters: Anodised aluminium dome tweeters are used on all but the
smallest models. These are protected by a stylish, low-diffraction ring. This ring
ensures that the clear, undistorted treble produced by the dome, leaves the
speaker undisturbed.

Drive units

F requency re s p o n s e

S e n s i t i v i t y
Nominal impedance
Power handling

1 x 25mm metal dome high-frequency
1 x 180mm Kevlar® mid/bass
40Hz – 20kHz ± 3dB on reference
axis
88dB spl (2.83V, 1m)
8Ω
20W - 150W into 8 ohm on
unclipped programme

D i m e n s i o n s

F i n i s h e s

P re Mount Frame

Frame size Height: 373mm
Width: 285mm
Cut-out size Without pre mount frame:
Height: 330mm Width:245mm
Cut-out size With pre mount frame:
Height: 346mm Width:257mm
Min depth required: 102mm
Semi-matt white suitable for customising
or pre-painting
PMK8 (optional)

B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.

www.bwspeakers.com