QUAD
i m a g i n g p o w e r
QUAD2400 GENERATOR INSTRUCTIONS BWL-0350/1 BOWENS INTERNATIONAL LIMITED
355 Old Road Clacton on Sea
Essex CO15 3RH UK
Tel: |
+44 (0)1255 422807 |
Fax: |
+44 (0)1255 436342 |
www.bowensinternational.com
BOWENS
QUAD2400
BW-7620
Table of Contents |
QUAD2400 |
|
QUAD2400 |
Specifications |
|
|
|
|
|
Description |
Page |
Introduction and Safety Notes |
3 |
Control Panel Guide |
4 – 5 |
Flash and Modelling Function Overview |
6 – 7 |
Triggering System |
7 |
Getting Started |
8 |
Warnings and Troubleshooting |
9 |
Specifications |
11 |
2 www.bowensinternational.com
2
2 (1 per channel)
Manual Selection - Channel A = Symmetric
2 f-stops in one-stop increments
3 f-stops in 1/3-stop increments on each channel
2400w/s Channel A only or split 1200W-s Channel A + 1200W-s Channel B
37 to 2400w/s (6-stops)
640 (feet/100 ISO) with UV-coated tube
Fast: <3 seconds
Slow: <5 seconds
5600 K with UV-coated tube
1/300 sec. at 2400W-s 1/1400 sec. at 600W-s
One LED numeric display per channel
±1% at maximum power
230V AC, 50 ±10% 50/60Hz
Green Ready Indicator lights up at 100% charge.
Audio Ready Signal and Modelling Intermittent when selected.
15A thermal breakers for charge and modelling
6V
Switchable: On/Off
Switchable: On/Off
650w (max.) x 2
Off, Proportional, 100% or Automatic 100%
in either Continuous or Intermittent flash-indication mode.
QUADX Flash Head (BW7660)
281 x 184 x 336mm (362mm inc. handle)
9.5kg
Due to our policy of constant product improvement, Bowens International reserves the right to change equipment
specifications without notice. |
www.bowensinternational.com 11 |
|