Boss Audio BV9997BI User Manual

00

Contents

1

Before You Start

Important Safeguards 4 About this manual 4 Precautions 5 Maintenance 6 Location & function of the controls 7 Remote control 9 Specifications 11

2

Installation

Wiring Connections 12 Installing the Unit 13 Detach the Unit 14 Installing the Front Panel 15 Detach the Front Panel 15

3

Common Operations

To Select Source by Menu 16 Reset the Unit 16 Turning the Unit On/Off 16 Volume Control 16 Setting the Sound Characteristics 16 Adjust the Angle 16 EQ Setting 17 Turning Loudness On/Off 17 Insert a SD Card 17 Eject a Dise 17 Mute Function 17 Mode Selector 17 Infrared Sensor 17 Double Function 17

5

4

Main Menu

Main Menu Setup 18 Video Adjustment 18 Audio Adjustment 18 Time Adjustment 19

2

Screen Adjustment 19 System 19

5

DISC/VCD/MP4

DISC/VCD/MP4 Setup 23 DISC/VCD/MP4 Operation 23 Selecting Tracks 23 Number Buttons 23 Pause the Playback 23 Stop the Playback 23 Play tracks at Random 24 Repeat Playing 24 Skip backward/forward/

Playback

System Switch 24 Slow Motion Playback 24 Increase Picture Size 24 On Screen Display 24 Setting the Playback Time 25 Changing Audio Language 25 Changing the Subtitle Language 25 Changing the Viewing Angle 26 Selecting Channel 26 Program Playing 26 Playing PBC(Menu) 26 Selecting Menu 27 DISC Setup Menu 27

6

CD/MP3/SD/USB

CD/MP3/SD/USB Setup CD/MP3/SD/USB Operation Selecting Tracks Repeat Playing Number Buttons Selecting Track Stop Play Playing Tracks at Random Pause the Playback Skip backwafd/forward/F.F/F.REW the Playback

24

35

36

F.F/F.REW the

34

35

36

34

35

11

Additional Information

Contents

00

Common Symptoms

There is no power.

The disc cannot be loaded.

The device does not work correctly (EJECT, LOAD, PLAY)

There is no sound.

The operation keys do not work

The sound of the disc player skips

No radio reception.

In automatic search mode the radio does not stop at a transmitting station.

46

Cause Solution

The car ignition is switched off

The fuse has blown.

There is another disc inside the player

Inserted disc is upside down

The surface of disc is extremely dirty, Scrached or damaged.

Temperature inside the car is

high.

too

The volume control is set too low.

The device has not been wired correctly.

1. The built-in microprocessor is not operating properly.

2. Front panel is not properly attached into its place

The installation angle is more than30 degrees

The surface of the road is uneven.

The surface of disc is extremely dirty,scrached or damaged.

The antenna cable is not connected.

The transmission signals are too weak.

If the power supply is properly connected to the car accessory, switch the ignition key to ON or ACC.

Replace with same amperatge fuse rate.

Remove the disc from the player

Insert the compact disc with the label facing upward

Clean the disc or try another disc,if the new disc works correctly, the first disc is damaged.

Cool off until the ambient temperature returns to normal.

Turn up the volume properly.

Check the connections according to

wiring diagram.

the

1. Switch the device off and on again or press the RESET button.

2. Remove and reinstall the front panel.

Adjust the installation angle to less than 30 degrees

Wait until the road becomes smoother before playing the disc.

Clean the disc or try another disc, if the new disc works correctly, the first disc is damaged.

Insert the antenna cable firmly into the antenna socket of the unit.

Tune in to a radio station manually.

On Screen Display Program Playing Eject a SD Card Eject an USB

7

Tuner

35

Listening to the Radio 37 Band Selector 37 Selecting The stored Station 37 Manual/Automatic Tuning 37 DX/LOC Selector 37 MO/ST Selector 38

Goto FREQ 38

AMS 38 Number Buttons 38

RDS Setup 39

Alternative Frequencies Traffic Alarm Program Type

8

AUX

39

36

39

AUX Touch Screen Menu 40

9

Bluetooth Mode

Bluetooth Operational Interface 41

Using a Bluetooth Wireless connection 41 Pairing Your Unit and Bluetooth Phone 41 Pairing in Handsfree Mode 41 Cellphone Pairing Mode 41 Bluetooth Connection and DVDonnection 42 Using the Unit as a Handsfree Device 42 Last Number Dialing 42 To Dial by Cellphone 42 To Dial by the Unit 43 Using the Unit as Bluetooth Music 43 Audio Transfer between The Unit and Phone 43

10

IPOD

IPOD Operation Selecting Tracks

44

Fast Forward/Fast Reverse 44 Repeat Playing Playing Tracks at Random Pause the Playback

44

45

File Selector 45 Eject IPOD 45

11

Additional Information

Simple Troubleshooting Guide 46

3

Before You Start

IPOD

10

IMPORTANT SAFEGUARDS

Be sure to connect the color coded wires

1

according to the diagram. Incorrect connections may cause the unit to malfunction or damage the vehicle s electrical system.

2

Be sure to connect the speaker (-) wires to the speaker (-) terminal. Never connect the left and right channel speaker cables each other or to the vehicle body.

3

Make sure all the connections are completely correct before turning on your unit.

When replacing the fuse(s), the replace-

4

ment must be of the same amperage as shown on the fuse holder.

Do not block vents or radiator panels.

5

Blocking them will cause heat to build up inside and may result in fire.

To lessen the driver's distraction, install

6

the unit in an appropriate place.

7

Power the unit on after starting the engine otherwise it will shut off due to lack of power.

8

Do not place the remote control in a place susceptible to high temperature or direct sunlight. Doing so will damage the remote.

9

Do not use the unit in

low temperatures. Also avoid high humidity and direct sunlight.

10

Take care of the magnetism of the unit. Do no put the credit card, cassette or watch around the unit.

,

extremely high or

About this manual

This unit features a number of sophisticated functions ensuring superior operation. All the functions have been designed for the easiest possible use, but many are not self-explanatory. This manual will help you understand the functions and operations of the unit. DISC/VCD/CD/MP3/MP4/SD operation that can only be operated by the remote control, but there are also functions that can be operated by the buttons provided for the main unit.

File Selector

During IPOD mode, press on the monitor to go back to the previous catalog.

Press on the monitor to select the previous 5 tracks, press to select the next 5 tracks (show as in the right of the picture).

Note:

* This function is operated by using the touch screen only.

MENU

Playlist

Artist

Album

Genre

Track

Video or Picture Mode

During IPOD mode, press to select video or audio. Video and picture can be played at this time. The unit and the remote control can not be operated in this mode, you can just operate IPOD to select video and picture.

Note:

* This function is operated by using the touch screen only. * The IPOD TV should be set ON in this function.

* Video playback requires Gen 5.5 or earlier Photo or Video iPod. iPod Touch, iPod Cl-

assic, and iPod Nano with video will only play music files.

VIDEO

Eject IPOD

If the iPod is removed during iPod mode, the unit will automatically switch to radio mode.

11

To minimize disturbance of the video frequency, keep far away from the unit

when using your phone.

45

10

IPOD

Before You Start

01

IPOD Operation

During IPOD playback, connect the IPOD wire (5V) to the one in backside of the main

unit. When the iPod is loaded, the unit will play a track. To go back to the source status, press iPod to enter into iPod setup:

8/97

DISCo-yeye

00:02:47

MENU

Back to the previous menu

Briefly press to play previous track, press and hold to

fast forward.

Briefly press to play next track, press and hold to

fast rewind.

Play/ pause

VIDEO

Mode switch between IPOD and main unit

BLUET

Press the button to enter into bluetooth mode

SRC

Mode switch

Selecting Tracks

During IPOD playback, press to return to the beginning of the current track,

21

press again within 3 seconds to play previous track ,press to play next track .

Note:

* Pressing / on the monitor to performs the same function

21

Playing Track F.F/F.REW

Press and hold or to play the track fast forward or fast rewind . Do it again or press ENTER to resume to play normally.

20

Note:

* Pressing and holding / on the monitor also performs the same function

Switch

During playback, press to turn to IPOD, the screen shows: Play video on your iPod. Then touch screen to return. Then you can operate your iPod. Press again to return to main unit operation.

Note:

* This function is operated by using the touch screen only.

VIDEO

Repeat Playing

During playback, press repeat, DISC repeat, off. cancel this function.

Note:

* This function is operated by using the remote control only.

15

RPT to track

Press it again to

Playing Tracks at Random

During IPOD playback, when RDM button, Shuffle off,

pressing

Shuffle Track,

Shuffle Album will be activated.

Note:

* This function is operated by using the remote control only.

16

Pause the Playback

27

button to

During IPOD mode, press pause the playback, Press it again to return to normal playback.

Note:

Press on the monitor or briefly press

*

SEARCH+/- on the head unit also performs the same function.

PRECAUTIONS

This unit can play the following DISCs only:

Type of disc

DISC

VCD

CD

MP3

MPEG-4

NOTE: The unit is compatible with VCD1.0/2.0/3.0 version and DVCD disc.

When driving, do not attempt to modify the unit. Modifying the unit may cause an accident.

Stop the vehicle before carrying out any operation that could interfere with your driving.

Do not turn the unit on in extre mely high or low temperature. Be sure the temperature inside the vehicle is between +60 C and -10 C before turning on your unit .

To enjoy optimum sound and images while playing, handle the DISCs as follows:

Recorded material

Sound and moving pictures

Sound only

Sound and moving pictures

Size of disc

44

5

01

Before You Start

Bluetooth

09

Maintenance

Replacing the Fuse

Make sure the amperage matches the specified value when replacing the fuses. If the fuse is blown,

a new one. Be sure you are using one with the correct rating.

problem occurs, it would be subjected to the malfunction. In such cases, please consult to the nearest service dealer.

!

Warning

Never use the fuse with the rated

amperage more than that supplied to

your unit, otherwise it will damage the

unit.

Replacing the Remote Battery

When the range of the operation of the remote control becomes short

or stops operating, Replace the battery . Be suer to use a lithium Battery button Cell Cr2025.

replace it with

If the same

Insert the Battery Holder into the Remote Control.

Precautions on Using Lithium Battery

Always keep the lithium battery beyond children s reach. In case swallowed, see a doctor immediately.

Cleaning the battery with a dry cloth, to ensure its perfect connected.

Install the battery with the proper polarity.

To prevent short circuit, do not use metal tweezer to handly the battery.

To Dial by the Unit

When cellphone is connected, press to input the call number, then press

to dial. DIAL OK will appear. When the call is picked up, PICKED UP appears.

Note:

* Press CLEAR on the remote control or

22

8

in the monitor to delete wrong inputs.

* Pressing in the monitor also performs the same function.

23

30

Using the Unit as Bluetooth Music

During bluetooth mode, the music on the cellphone To select music fast: press to play the previous track, press to play the next one. Pause play: press to pause play. Stop play: press to stop play, and press the PLAY to return to the beginning of the current track.

* This function is only valid on the remote control .

will play through the unit.

21

17

18

Note:

Audio Transfer between the Unit and Phone

6

Press to change the conversation from the unit to the cellphone.

Note:

*

The function might cause the bluetooth to be disconnected for some phones. If this happens, press the button while on the call to be paired back automatically.

6

Gently pull out the Battery Holder while pressing the Stopper.

Put the button-type battery with mark(+) upward into the Battery Holder.

6

!

Warning!

Improper handle with the battery may

lead to explosion.

It cannot be charged , disassembled or

thrown into a fire.

43

09

Bluetooth

Before You Start

01

Cellphone Pairing Mode

1. Browse your cellphone menu and find the connectivity or Bluetooth connection section.

2. Select search for a new handsfree device function and allow the phone to find the mobile. (Different cell phones have different blue tooth menus, please refer to your phone manual.)

3. When CAR A/V DEVICE appears, select this item. ( if it can not be connected, please refer to mobile manual, and connect it again.)

4. To input the password, the password is:

1234.

5. Press the connect with the Handsfree option on your cellphone, CONNECT appears.

Bluetooth Connection and Disconnection

When you established a bluetooth connection between this unit and the cellphone, the bluetooth icon on the display appears in red.

29

Press PAIR to turn off bluetooth connection, and appears in blue.

29

Press , PAIR SUCCESS will appear on

the display. When the bluetooth is connected, the display will show CONNECT. When the Bluetooth is disconnected, the display will show PAIRING TIME OUT.

Note:

* Make sure the phone battery has good power.

If not, the connection quality may be affected.

* To ensure connection succeed

----Please selete menus of cellphone with bluetooth.

----Please reset the unit and cellphone.

----Please reset every step of pairing. * Disconnect after paring

----Please pair the phone manually. For example: pairing fixture cellphone connect.

* Pressing in the monitor also performs the same function. * Press in the monitor to turn off the bluetooth function.

5

7

Using the Unit as a Handsfree Device

When the unit is ringing,

show CALL FROM and the phone number **********

. To accept call: Press to answer a call,

the display will show PICK UP.

To reject call: Press to reject a call,

the display will show REJECT

To end call: Press to end call,

the display will show HANG UP

Note:

* Some of cellphones do not support reject call during bluetooth mode.

* Pressing and in the monitor also performs the same function.

the display will

30

31

.

Last Number Dialing

30

Press button, last call number will apear, press again, and then REDIAL OK appears on the display during conversation.

Note:

* Pressing in the monitor also performs the same function.

To Dial by Cellphone

When you make a call by cell phone, the

1.

unit will automatically be activated. DIAL OK will appear on the display.

2. When you receive a call, PICK UP appears on the display.

Location of the Controls

Open

Closed

16

7

1

4

19

13

3

2

12

8

1810

5

11

17

15

14

20

42

7

01

Before You Start

Bluetooth

09

The Base

11

SRC/PWR

Briefly press to select radio mode or playback mode, press and hold it to turn the unit on or off.

2

Eject Button

Press it to eject a DISC.

BND/ /[ ](band selector/play/pause/

3

pair) Button

During radio mode, press it to select the bands; During playback mode, press it to play or pause. During bluetooth, press it to pair.

/ /

[ // ]/[]([Search frequency

4

backward/Previous/The last phone, Answer a telephone]/[Search frequency forward/Next Track/Hangup, reject a call])

5

ANGEL / Button Press it to changes the angle of the monitor.

6

Common SD Card Slot

7

VOL+/ VOL-/SEL

8

REMOTE Infrared Sensor

9

RESET Button

A/V IN

10

96

11

MENU Button

During playback mode, press this button to enter the DISC setup menu; during radio mode, press it to enter the radio setup menu, press and hold it to enter the main menu.

12

USB Socket

(Back Space) Button

13

14

DISC Loading Slot

15

OPEN Button

16

MUTE Button

17

LCD Screen

18

REL (release the front panel) Button

19

LOU/TA (loudness/traffic alarm) Button

20

BLUETOOTH Microphone

Bluetooth Operational Interface

28

Press BT on the remote control or BT on the monitorr to open the bluetooth operational interface:

1

Number Buttons

To input the phone number.

2

Dial last call, answer a call

3

Hang up, refuse a call.

4

Number Show

5

PAIR

6

ACH (audio change)

Note:

* Some phones can switch the audio from the unit to the phone.

7

POWER

Press it to turn on or turn off the bluetooth function.

8

C (clear)

9

BACK

Using a Bluetooth Wireless Connection

The device can be dialed wirelessly in bluetooth status. Before using the bluetooth function, please turn on your cellphone bluetooth function.

Note:

* To provide the best sound without or little distorted sound(

sidetone is caused by cellphone or network itself.

). * .Perfect bidirectional conversation * Bluetooth ver2.0 compliant.

*

Please well connect microphone to the unit before connecting bluetooth

.

Some reverberation or

Pairing Your Unit and Bluetooth Phone

The device supports handsfree profile, headset profile, A2DP( Audio Advanced Distribution profile)and AVRCP(Audio Video Remote Control profile). Follow the pairing instruction for the first time use, after that the unit will connect automatically.

Pairing in Handsfree Mode

1. Press PAIR, PAIRING shows on the screen.

2. CELLPHONE CONNECTION to search fixtures;

3. If the cellphone has connected, PAIR SUCCESS appears, then CONNECT ,

will change from blue to red.

* Pressing on the monitor also performs the same function.

5

Note:

8

41