Boss Audio BV8235B User Manual

BV8235B

Contents

In-Dash AM/FM
DVD/MP3/CD Receiver With
5 Widescreen Touchscreen TFT Monitor
With Front Panel USB Port

Bluetooth

Precautions .....................................

Safety Information.........................

Disc Notes ....................................

Installation ....................................

Detaching the control panel ..............

Changing the control panel ...............

Electric Connection ......................

Remote Control ...........................

Control Panel ................................

Touch Panel

Unit Keys ......................................

Basic Operations

TFT Monitor

Rear View Camera

Audio Quality Adjustments

Setting Audio Mode ..................... ....

Reset The Factory Setting

Scroll Caption Adjustments ..............

Radio Operations ..........................

Listening to the radio .......................

Storing stations in memory ...............

Listening to a preset station .............

RDS Function ............................. ...

DISC Operations ...........................

Basic Operations ............................

Select Playback Mode .....................

AUX Operation ...............................

On-Screen Disc Operations .............

....................................

..........................

Adjustment ................

........................

...............

...............

10

13

13

14

17

18

18

18

19

19

19

20

20

20

21

2

2

23

25

26

27

2

DISC Special Functions ................

3

Selecting audio languages ...............

4

Selecting Subtitles .........................

5

Selecting multi-angle views ..............

7

Title menu function ..........................

8

Setup ............................................

9

General Setup ................................

Speaker Setup ...............................

Dolby Digital Setup ........................

Preferences Setup ..........................

Defaults Table ................................

BLUETOOTH Operation..................

Other Main Operations ...................

USB Operations ..............................

MP3/WMA/JPEG Play ......................

MPEG4 Play ...................................

Specifications ...............................

Trouble Shooting ..........................

1

3

28

28

28

28

28

29

29

31

31

32

33

34

36

36

37

37

38

39

1

Precautions

THANK YOU FOR PURCHASING THIS CAR DVD PLAYER .

Before operating the unit, read this manual thoroughly and keep it handy
for future reference .
To avoid injury or accident , read the following precautions before
installing and operating the unit .

ON INSTALLATION

DO NOT install any receiver in locations where;

- it may obstruct the steering wheel and gearshift lever operations, as this
may result in a traffic accident.

- it may obstruct the operation of safety devices such as air bags, as this
may result in a fatal accident.

- it may obstruct visibility.

DO NOT operate any receiver while manipulating the steering wheel, as

this may result in a traffic accident.

The driver must not watch the monitor while driving.
IF THE DRIVER watches the monitor while driving, it may lead to

carelessness and cause an accident.

IF YOU NEED to operate the receive while driving, be sure to look ahead

carefully or you may be involved in a traffic accident.

IF THE PARKING BRAKE is not engaged.“ ParkingBrake” flashes on the

monitor, and no playback picture will be shown.

- This warning appears only when the parking brake wire is connected to

the parking brake system built in the car ( refer to the wiring diagram )

ABOUT THE LIQUID CRYSTAL DISPLAY (LCD) PANEL

Do not press too firmly on the LCD panel on the unit as doing so can distort the
picture or cause a malfunction . The picture may become unclear , or the
LCD panel may be damaged .

NOTES ON CLEANING

-Clean the LCD panel with a slightly damp soft cloth.

-Do not use solvents such as benzine, thinner, commercially available

cleaners or antistatic spray .

-Do not use alcohol to clean the screen .
If your car was parked in a cold or hot place, the picture may not be clear .
The monitor is not damaged . The picture will become clear the temper­ature in your car becomes normal .

2

Safety Information

CAUTION:

THIS DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DVD
PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE .
HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE
THE DVD PLAYER CORRECTLYAS INSTRUCTED.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT
REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.

THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.

COPYRIGHT PROTECTION

This product incorporates copyright protection technology that is protected
by method claims of certain U.S. Patents and other intellectual property rights
owned by Macrovision Corporation and other rights owners.Use of this
copyright protection technology must be authorized by Macro vision Corporation,
and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.

REGION MANAGEMENT INFORMATION:

This DVD Player is designed and manufactured to respond to the Region
Management Information that is recorded on a DVD disc. If the Region number
described on the DVD disc does not correspond to the Region number of this
DVD Player, this DVD Player cannot play this disc.

3

Disc Notes

Disc formats supported by this
player

DVD

VCD

CD

MP3

Audio and Video
Discsize12cm

Audio and Video
Discsize12cm

Audio
Discsize12cm

Audio
Discsize12cm

Discs which cannot be played
with this player

DVD-RAM
CDV
CDG

Handling and Cleaning

Dirt, dust, scratches and warping disc

will cause misoperation.
Do not place stickers or make
scratches on discs.
Do not warp discs.

A disc should always be kept in its
case when not in use to prevent from
damaging.
Do not place discs in the following
places:

1.Direct sunlight

2.Dirty, dusty and damp areas

3.Near car heaters

4.On the seats or dashboard

Disc Cleaning

Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moistured with isopropyl (rubbing)
alcohol. Never use solvents such as
benzine, thinner or conventional record
cleaners as they may mar the surface of
the disc.

Note:

A disc may become somewhat scratched
(although not enough to make it

unusable) depending on your handle it
and conditions in the usage environment.
Note these scratches are not an
indication of any problem with the player.

Label side
up

Do nottouch
the
underside
of thedisc

Do not
bend

Wipe the disc from
center
toward theoutside
edge

Preparing New Discs with

Rough

Spots

A new disc may have rough edges on
its inside and outside edges.If a disc
with rough edges is used, the proper
setting will not be performed and the
player will not play the disc.Therefore,
remove the rough edges in advance
by using a ball point pen or pencil as
shown on the right.To remove the
rough edges, press the s ide of the pen
or pencil against the inside and outside
edges of the disc.

Rough spots
on
outside edge

Ball pointpen
or pencil

Rough spots
on inside
edge

4

Installation

NOTES:

Choose the mounting location where the unit will not interfere with the normal
driving function of the driver.

Before finally installing the unit, connect the wiring temporarily and make sure
it is

all connected up properly and the unit and the system work properly.

Use only the parts included with the unit to ensure proper installation. The use
of

unauthorized parts can cause malfunctions.

Consult with your nearest dealer if installation requires the drilling of holes or
other

modifications of the vehicle.

Install the unit where it does not get in the driver s way and cannot injure the
passenger if there is a sudden stop, like an emergency stop.

If installation angle exceeds 30 from horizontal, the unit might not give its
optimum

performance.

'

30

Avoid installing the unit where it would be subject to high temperature, such
as from
subject to dust,

DIN FRONT/REAR-MOUNT

This unit can be properly installed either from "Front"(conventional DIN

Front-mount)
screw holes at the sides of
illustrated installation methods.

USA/EURO FREQUENCY SWITCH

On the right of this device, there is a USA/EURO frequency switch, you can select

the desired radio frequency before installing .

direct sunlight, or from hot air, from the heater, or where it would be

dirt or excessive vibration.

or "Rear"(DIN Rear-mount installation, utilizing threaded

the unit chassis). For details, refer to the following

USA/EURO Frequency Switch (radio frequency
switch for selecting between the USA and EUROPE
frequency band. )

5

Installation

SPRING WASHER

PLAIN WASHER

TAPPING SCREW

DASH BOARD

HEX NUT

METAL MOUNTING
STRAP

CONSOLE

SLIDE BRACKET
HOUSING

HEX BOLT

KEY PLATE

PLASTIC COVER

KEY PLATE

If you want to take CHASSIS out of the SLIDE BRACKET HOUSING,
first remove the PLASTIC COVER of the both sides away, then insert

the two KEY PLATE into left and right side of chassis as above illustration.

6

Installation

How To Remove And Install The Front Panel

When detaching or attaching the control panel, be careful not to damage the
connectors on the back of the control panel and on the panel holder.

Detaching The Front Panel

Before detaching the control panel, be sure to turn off the power.

1). Press the release button and the left hand side of the front panel will release.

RELEASE BUTTON

2). Pull-off the front panel and keep the front panel into the case .

PROTECTIVE CASE

Attaching The Front Panel

1). First insert the right hand side of the front panel into the hollow of the unit .
(NOTE : the “bulge” point on the panel must be attached into the hollow of the unit .)

2). Gently push the left hand side of the front panel until you feel a “ Click” .

Hollow

Bulge

7

Panel Angle Adjustment

CHANGING THE CONTROL PANEL ANGLE

When you want to change the viewing angle of the operating unit to play,
you can touch the section on touch screen (or press the button
on the front panel) repeatedly to select the desired angle as follows:

Angle 1 Angle 2

Angle 4

Angle 3

Caution:

Do not insert your finger behind the control panel.

8

Electric Connection

WIRING CONNECTION

MAIN UNIT

RADIO ANTENNA JACK

IGNITION

SWITCH(B+)

CONSTANT

12 VOLTS

GROUND(B-)

AUTO ANTENNA
& AMPTURN ON

RED

YELLOW

BLACK

BLUE

FRONT

Lch SPK.

REAR

Lch SPK.

FUSE

CHOKE
BOX

FUSE

WHITE/BLACK

GREEN/BLACK

ISO CONNECTOR

WHITE

GREEN

FRONT RCA OUTPUT

CABLE

GREY

GREY/BLACK

VIOLET

VIOLET/BLACK

WHITE

GREEN

YELLOW

RCA CABLE

REAR RCAOUTPUT

CABLE

FRONT

Rch SPK.

REAR

Rch SPK.

(B+)12V
REAR CAMERASWITCH

(B-)PARKING BRAKE

REAR CAMERAINPUT

GREY SUBWOOFER
VIDEO OUT2 YELLOW

COAXIAL OUT BROWN

RCH RED

LCH WHITE

FRONT RCA RED R

VIDEO OUT 1YELLOW

FRONT RCA WHITE L

Note :
The "PARKING BRAKE" wire must be connected to the parking brake system of
your car. When the parking brake is engaged, the LCD screen will be allowed to
view your video. If not, the screen will produce an image saying,
"PARKING BRAKE" This is a safety feature designed for the driver not to watch a
video while driving. The video output on this unit is not affected by this.

9

Remote Control

Ref #

1

2

3

4

5

6

7

Button

CLOCK

PAIR/

STOP

SETUP

MO/ST
(AUDIO)

SUBTITLE
LOCAL/
DISTANT

Redial/

17

15

19

7

2

13

6

22

14

18

11

3

20

21

9

26

16

5

1

23

12

10

25

4

8

Function

Press it briefly to view the clock time , Press again to return to
normal display mode . Press longer to set the time .

Press it to use the Bluetooth function , refer to the page 33 .
Press once to pause playback. Press PLAY/PAUSE to resume

playback. Please note: if you press STOP twice, playback will
start at the beginning of the disc.

Press this button to open the SETUP menu.

In Radio mode, press this button to change between Mono and
Stereo reception modes (when a station is weak, sometimes
switching to Mono will improve sound quality). In Disc Playback
mode, pressing this button opens the AUDIO setup menu for
making changes to the way the soundtrack is reproduced.

In DVD Disc Playback mode, pressing this button will allow you to
change the subtitle language on discs which have this as an
option.
In Radio mode, press this button to change the radio reception
sensitivity in stations are near or far.

Press this button to use the Bluetooth function, refer to page 33.

10

24

Remote Control

Ref #

8

9

10

11

12

13

14

15

16

Button

GOTO

/

SELECT

VOL+/-

///

Menu
SubWoofer

BAND
(OSD)

MOD

POWER

PLAY/
PAUSE

Function

Press it button to begin playback at a moment in the program you
designate. Use number buttons to enter the data that is needed.
In Bluetooth menu, it serves as the button on your mobile
handset.

Press these buttons to skip ahead or back one track. (Note: In
DVD mode, press continually the twice to skip back one)

Press this button repeatedly to cycle through the various audio
and video adjustments you can make: Volume, Bass, Treble,
Balance, Fader, Color, Brightness, Contrast and Tint.

Use these controls to adjust the volume level.

Press to navigate the various menus present in the product.

Press this button briefly to display the root level directory of a
DVD disc. Press and hold this button to turn on or off the
SUBWOOFER output.

In Radio mode, press this button repeatedly to switch between
the five radio bands: FM1 > FM2 > FM3 > AM1 >AM2.
In Disc Playback modes, Press this button to see information
about the disc currently in play.

Press this button to turn the unit ON , press and hold to turn the
unit OFF. Press it briefly to select the Disc, Radio , AUX In ,
BT Music mode.

In Disc Playback mode, press to pause playback. Press again to
start where playback stopped.

17

18

19

20

21

22

MUTE

TITLE/
PBC(A/P)

ANGLE

EQ/LOUD

/

Press this button to turn off the audio. Press again to restore the
sound to its prior volume level.

When playing a DVD, pressing this button will open the TITLE
menu which is recorded on the DVD. When playing a VCD disc,
press this button to create a PBC (Playback Control) menu for the
disc to assist in making playback selections. In Radio mode,
press and hold this button to start the Auto-Program mode, during
which the tuner will scan for all strong stations and assign them
to the radio preset buttons.

Press this button to adjust the screen viewing angle (see page 8).

For DVD discs which have alternate viewing angles encoded,
when you see the "angle mark" symbol advising you that these
angles are available, press this button to see them.

Press repeatedly to cycle through the different equalizer curve
presets you may wish to use for enhanced listening.

In Disc Playback mode, press for fast forward/reverse playback.

11

Remote Control

Ref #

23

24

25

26

Button

ENTER

0-9

+10/

1-6

This button is used to confirm selections and settings within
many of the menus in the OSD system.

These buttons are used for numeric entry in many different menus.
In addition, in Radio Mode (when RDS is engaged), 0 serves as
the TA button and 9 serves as the AF button.

This button is used with the other number buttons for use with
two-digit number entries. In Bluetooth menu, it serves as the
button on your mobile handset.

Six numbered preset buttons store and recall stations for each band .

Function

Preparing the Remote Control

Inserting the Batteries

1.First push to inside as the direction indicated by the arrow (See )And then

Remove the battery holder as the direction indicated by the arrow (See ).

2.Replace the battery Set a new battery property with (+)side up as illustrated

(See ).

3

3.Insert the battery holder. Push in the holder to the original position(See ).

1

2

4

Using the Remote Control

Face the remote control towards the player front face IR mark (remote control signal

receiver).

Operation angle: About 30 degree in each the direction of the front of the IR mark.

Note :

The lithium cell in the battery compartment of remote control has been secured for

transport with a foil . Before initial use please remove this foil so that the remote

control is ready for operation .

12

Control Panel

Key Functions

Touch Panel

1234

CALL

VOLUME-

8

CALL

VOLUME-

SEL

Touch Screen Key :

CALL

1.

RECALL

2. : Reject a call

: Answer a call

3. : Mute function

4. :MOD Select input mode

MOD

5

SEL

7

RECALL

VOLUME+

RECALL

VOLUME+

6

MOD

7. :SEL Select the menu of the
Sound/Picture

8. :Volume- Volume
adjustment (-)

5. : Previous

6. :Volume+ Volume adjustment (+)

13

Control Panel

Unit Keys :

193

11

13

14

1815

19

5

12

16

217

7

1. REL BUTTON

Press this button to release the front panel for removal . Refer to see page 7.

2. (POWER On/Off)/MOD BUTTON

Press it to switch the device ON, press and hold (approximately 2 seconds) to
switch the device OFF . During the playback mode, you can press it to select an
input mode by pressing repeatedly until proper one is found:

AUXIN>RADIO>DISC>BTMUSIC

If you are in USB playback mode and want to select the DISC mode, press the

STOP button and then press the GOTO button.

3. VOL+/ VOL- KNOB

In normal mode, this knob is used to increase or decrease the volume. It is also
sed as an UP/DOWN knob when audio or video settings are being adjusted
when accessed using the SELECT button.

10

6

4

8

4. SELECT KNOB

To access the available adjustment settings for audio and video, press this knob
repeatedly to cycle through and select them:

Buzzer Volume Bass Treble Balance Fader

Tint Contrast Bright Color Bluetooth

5. BAND/ BUTTON

In Radio mode,

FM3, AM1(MW1), AM2(MW2) .

In Bluetooth menu, press this button to end the telephone call or reject the
incoming telephone call , please refer to see page 33.

press it repeatedly to select the desired radio band: FM1, FM2,

14

Control Panel

6. TA/AF BUTTON

TA Function [traffic Announcement] Button(for Rds Only)

In RADIO mode
When you swing briefly the SEL knob in the TA/AF direction , the TA function is
activated, the TA symbol appears in the display . ( swing it again to turn off . )

AF [Alternative Frequencies]

Swing and hold (for about 2 seconds) the SEL knob in the TA/AF direction , the AF
function is activated. The AF symbol appears in the display . (Swing and hold it
again to cancel this function .) The function about RDS to see page 20 .

Note:

In Radio mode, press and hold the SEL knob for a long time to access the

selection menu:

Repeatedly pressing the SEL knob to select the item and by using the
VOL+/- to change .

7. APS, DISPLAY FUNCTIONS (using the SELECT knob)

Scan Function

In Radio mode, swing the SEL knob briefly in the APS/DISP direction , the radio
briefly plays all the preset stations of the frequency band .

Automatic Preset Setup

In Radio mode, swing the SEL knob in direction of the APS/DISP for about 2
seconds to active automatic station storage. The radio searches within the
current frequency band, e.g. Fm1, for the stronger signal level until the search
cycle has finished . The six strongest stations are then allocated to the correspo­nding storage locations . Then the station of the first storage location is set .

Display ON/OFF Function:

In Disc mode, swing the SEL knob briefly in the direction of APS/DISP to turn off
the display image (the monitor on the unit only) , the sound will stay on.
(Swing it again to resume the playback picture mode.) You can press SEL knob
briefly to select the “BG COLOR” by repeatedly pressing the SEL knob, then
rotate the VOL+/- to select the background color among of the

“AUTO, BG COLOR: 01........BG COLOR: 11”, in “AUTO” mode, the monitor of

unit will change the background color automatically .

REG ON/REG OFF, PI MUTE/PI SOUND,AF ON/AF OFF .

8. (MUTE)/PTY BUTTON

Press this button briefly to select the MUTE or NOT .

In Radio Mode

press this button and hold for a bout 2 seconds to select the PYT

of the grogram type (examples of such types of program are : NEWS, POP.....)

9. ANGLE (Screen position)

Press this button repeatedly to cycle through the different positions.

10. /CH 1-6 BUTTON(RADIO PRESET)

A). In Disc Playback Mode

Press this button to pause playback, press it again to resume playback.

B). In Radio Mode

Press this button repeatedly to preset station. (Please refer to see page 20 .)

15

Control Panel

11. / BUTTONS (TUNE, SEEK, TRACK, SKIP UP/DOWN)

A) In DISC, USB mode:

if you wish to jump forwards or backwards press the SEL button (4) briefly in
the or direction. (Note: in DVD mode, press the SEL button continually
twice in direction to skip back one track during playback.)
To go through the tracks keep the SEL button pressed in the or direction
for about 2 seconds. FF X2 appears in the display. Operating the SEL button
again, the speed of rapid forward/reverse changes according to the disc

as follow:

DVD/VCD/CD/MP3:

Normal Playback 2x 4x 8x 16x

B) In Radio Mode:

Move the SEL button in the direction of or in order to set a radio station
manually. Keep the SEL taste pressed down in the or direction in order to
start the search for a radio station automatically.

12. PAIR/ BUTTON

In Bluetooth menu, press this button to use the Bluetooth function, how to use it ,
please refer to see page 33.

13. (EJECT) button

Press it button to eject the DISC or insert the DISC to start play .

14. RESET button

Press this button to return to the factory settings .

15. IR sensor

16. AUX Input Jack

For information about connecting a AUX device, please see page 25 .

17. USB PORT

For information about connecting a USB device, please see page 35.

18. TFT Display

The operation of the TFT, please see page 17.

(Thin Film Transistor)

19. MIC (microphone)

Microphone position .

16

Basic Operation

POWER On/Off

Press it to switch the device ON,
press and hold about 2 seconds
to switch the device OFF.

Ejecting The Disc

Use your finger to touch the

range on touch screen ,

the control panel of the unit

you can insert the disc or eject the disc .
(You can also press the button on the
front panel to eject the disc or insert the
disctostartplay.)

will swing downwards . Then

Select Sources

Touch the MOD

MOD

DISC

BT MUSIC

repeatedly
section on the screen, the
signals will display in the
screen as follow :

AUX IN

RADIO

Touch screen

VOLUME+

Touch the screen the
VOLUME+ to increase
the volume level .

VOLUME-

Touch the screen the
VOLUME- to decrease
the volume level .

Mute Function

Use your finger to touch
the section , it will
mute the sound but the
disc continues playing.
Touch it again to resume .

Setting The Clock

CLK

Touch the CLK section on the
screen and hold for about 2
seconds the hour will flash ,
rotate the VOL+/- to adjust .
Touch it again, the minute
will flash, then use the VOL+/­to adjust .

Volume Adjusting

Volume button

A

Revolve : clockwise to increase /

Anticlockwise to decrease .

B

Press the VOL+/- on remote control ,

to change the volume level .

Setting The Buzzer ON/OFF

SEL

Touch the SEL section on the
touch screen to select the

BUZZER

the VOL+/- (or rotate the vol+
/vol-) to switch the

ON/OFF .

item, and then touch

Setting Blue-tooth ON/OFF

Touch the SEL section on the

SEL

17

touch screen to select the
Blue-tooth item, and then
touch the VOL+/- (or rotate
the vol+/-) to switch the Blue­tooth ON/OFF .

BUZZER

Basic Operation

TFT Monitor Adjustment

During DISC playback, use your

SEL

finger to touch briefly the SEL
section on the screen (or press
SEL button on front panel
to access the Picture

selection menu, by repeatedly touch the
SEL section, and then touch the VOL+/­(or rotate the VOL+/-) to adjust the
selected mode .
(The corresponding value will show on
the monitor )

Volume Bass Treble Balance

Bluetooth

Contrast Bright ColorTint

DVD 11-0:44:36

LUD

VOLUME-

touch to select

touch to adjust

SWF

SEL

POP

VOLUME+

DISC

11: 08

MOD

)

mode

FaderBuzzer

Rear View Camera

When connecting the rear view camera.
the mirror image of the rear view through
the rear view camera is automatically
displayed on the monitor when you
change the gear to the back position.
(The monitor on the unit only.)

Audio Quality Adjustment

During DISC playback, use your

SEL

finger to touch briefly the SEL
section on the screen (or press

to access the Sound mode selection
menu, by repeatedly touch the SEL
section, and then touch the vol+/­(or rotate the vol+/-) to adjust the
selected mode . (The corresponding
value will show on the monitor )

Volume Bass Treble Balance

Bluetooth

SEL button on the front panel )

Contrast Bright ColorTint

DVD 11-0:44:36

LUD

VOLUME-

SWF

SEL

POP

VOLUME+

DISC

11: 08

MOD

FaderBuzzer

ADJUSTABLE ITEMS:

COLOR: 0 to 32

Adjust the color for the picture-lighter or

darker.
BRIGHT:0to32

Adjust if the picture is too bright or

too dark.
CONTRAST: 0 to 32

Adjust the contrast of the bright and dark

portion.
TINT:0to32

Adjust the tint if the human skin color is

unnatural.

-Adjustable when NTSC is selected for
NTSC/PAL .

““

““

touch to select

touch to adjust

It`s depend on your habit to setup the data .

ADJUSTABLE ITEMS:
Volume:

0to32

Adjust volume level by using VOL +/-.

-14to+14

Bass:

Adjust bass level by using VOL +/-.

Treble:

-14to+14

Adjust treble level by using VOL +/-.

18

Basic Operation

Balance:

R0-10toL0-10.
Adjust sound balance between left
and right speakers by using VOL + / -

-

Fader:

F0 10toR0-10.

.

Adjust sound balance between front and
rear speakers by using VOL + / VOL - .

Setting Audio Modes

Touch the screen the DSP range

DSP

(or press the button
on the remote )
the preset sound modes .

(Rock/Pop/Jazz/Classic/Flat).

The information will display in the
monitor as follow :

POP

ROCK

FLAT

DVD 11-0:44:36

LUD

SWF

TA AF CLKSWF LU D DSP

RDM INT RPT

EQ/LOUD

to select one of

CLASSIC

POP

DISC

OSD

JAZZ

11: 08

to ahead/back (proceed/cancel) , and
then press the SETUP button briefly to
confirm .

FM1 106.30 MHz

ST

LUD

DX

SWF

TA

POP

DISC

11: 08

(Please note : press the button longer

again to renew it . )

Reset Factory Settings

RESET button is placed on the housing
and must be activated with either a
ballpoint pen or thin metal object.
The RESET button is to be activated for
the following reasons:

A. Initial installation of the unit when
all wiring is completed.
B. All the function buttons do not operate.
C. Error symbol on the display.

RESET

touch to select

It`s depend on your habit to select the
Audio mode .

Scroll Caption Adjustment

In Radio mode:

You can adjust your desired scroll
caption , the method of the operation
as follow:
A). Press and hold the SETUP button
(for about 2 seconds) on the remote
control, the adjustment scroll bar will
display on the screen .
B). Use the VOL+/- to select among of

the “A, B, C ....X, Y, Z, and blank ”, and

use the / button on the front panel

RESET

NOTE:

If RESET is selected, all memory data
will deleted, please re-adjust .

19

Radio Operation

Listening to the Radio

Switching To Radio Mode

Touch the range repeatedly

MOD

on the touch screen to select the

RADIO mode. (You can also
press repeatedly the / MOD
button to select the RADIO .)

the following information will appears on
the display :

FM1 106.30 MHz

ST

LUD

SWF

4 5 6

FM1 106.30 MHz

ST

LUD

SWF

VOLUME- VOLUME+

CALL

MOD

TA

DX

POP

DISC

2 31

BND

TA

DX

POP

DISC

SEL LOC

RECALL

CH

11: 08

MOD

CH

11: 08

6

6

FM1 FM2 FM3

AM2(MW2)

()You can also press the on front

AM1(MW1)

BND

panel repeatedly to select the band .

Start Searching For a Station

Manual Search

During Radio mode, briefly touch the
screen of “ ” section or press the
“ ” on front panel to increase frequency
by one step of channel spacing .

Briefly touch the “ ” section or press
the “ ” button on the front panel to
decrease frequency by one step of
channel spacing .

Automatic Search

During Radio mode, touch and hold
(for more than 2’s ) the screen of “ / ”
section or press longer the “ / ” on
the front panel to start search for a radio
station automatically .

DISC

PAIR

CH

11: 08

6

FM1 106.30 MHz

ST

LUD

TA AF ST

TA

DX

POP

SWF

DSP CLK PTYSWF LUD APS

Touch “ ” to next .

Touch “ ” to previous .

Selecting The Frequency Band

Touch the BND section on the

BND

touch screen repeatedly to select
the band , screen band will show
in turn :

When an FM stereo broadcast is
hard to receive

Touch the ST section on the

ST

touch screen (or press ST/MO
button on the remote) to select
the MONO or STEREO mode .

()When Stereo mode is activated, the ST

symbol will appear .

20

Radio Operation

To tune in strong-singnal FM
Station only (LO/DX function)

Touch the LOC section on the

LOC

touch screen (or press LO/DX
button on the remote) to select
the LOCAL or DX mode .

(You can choose between the LOCAL

and DX(DISTANCE) mode for local or
long-distance traffic news .)

Storing Stations In Memory

Setting Memory

Press the “ ” button repeatedly
on the front panel to preset stations at
radio mode . Or touch the screen the
1-6 sections

ST

LUD

Touchtopresetstation

/CH 1-6

(

)

FM1 106.30 MHz

4 5 6

DX

SWF

TA

POP

DISC

2 31

BND

CH

11: 08

MOD

6

Automatic Memory Storing &
Program Scanning

Automatic Preset Setup

In Radio Mode, Touch and keep

APS

the “ ” section on the touch

APS

screen for more than two seconds

to active automatic station storage.
The radio searches within the current
frequency band, e.g. FM1, for stronger
signal level until the search cycle has
finished . The six strongest stations are
then allocated to the corresponding
storage locations . Then the station of
the first storage location is set .

Scan Function

In Radio mode, briefly touch the

APS

“ ”section on touch screen

APS

preset stations of the frequency band .

the radio briefly plays all the

RDS FUNCTION

In Radio mode, touch it to select
the desired item, it will display the

following as below :

With this system, a total of 30 stations
can be stored in the memory of six
buttons. Each band stores up to six
preset stations. The stations might be
FM1, FM2, FM3, AM1(MW1), and
AM2(MW2) band.
The operation is as below :

-Store in Memory
Touch and keep the 1-6 sections
(or press and hold the ) for

/CH1-6

about 2 seconds, the current listening
station will be stored into the number
location .

-Retrieve a preset station
Touch the 1-6 sections briefly (or press
the “ ” button repeatedly) to

/CH1-6

retrieve a station which had been stored
in the memory in advance the chose
number is shown on display .

DISC

PAIR

CH

11: 08

6

FM1 106.30 MHz

ST

LUD

TA AF ST

TA

DX

POP

SWF

DSP CLK PTYSWF LUD APS

TA Traffic Annonuncement

(priority For Traffic Information)

In Radio mode, touch the TA

TA

section briefly to activate the TA
function. Touch it again to turn off

the TA function .When the TA function is
activated, the TA symbol appears in the
display .

21

Radio Operation

During radio operation in one FM
frequency band the search for a traffic
announcement station is started
automatically (TA SEEK) .

If an FM station is being received which
transmits the latest traffic announce­ments from time to time, the TP display
lights up.

When the TA function is switched on ,
the FM traffic automatically interrupt CD
operation(the word TRAFFIC appears
in the display).

The volume level is increased to the

minimum value for the transmission of
traffic announcements.

After the traffic announcements has

finished, the program that was previously
running is resumed.

Interruption of the TA Function:
if you would like to interrupt the current
traffic announcement, touch the TA
section on screen briefly . This does
switch off the TA mode .

AF FUNCTION

(Alternative Frequencies)

In Radio mode, touch the AF

AF

section briefly to activate the AF
function. Touch it again to turn off
the AF function .

AF is a function that works with the help
of RDS (Radio Data System) and can
only be used with FM stations . The radio
searches in the background for the best
frequency reception of the station that
has been tuned into .

Touch and hold (for more than 2’s )the
screen of “ AF ” section , the AF function
is activated. The AF symbol appears in
the display .

When the AF function has been switched
on, the radio continuously tests the
signal strength of the AF frequency .
The test interval for each AF frequency
depends on the signal strength of the
current station and varies from a few
minutes in the case of weak signals.

Whenever the new AF frequency is
stronger than the station that is currently
tuned in , the radio switched to this
frequency for a short time for a short
time and the message
“NEW FREQUENCY “ is displayed for
one or two seconds.

Note :

the status of the AF function is shown by
an AF symbol in the display.

If the AF symbol appears in the display,
the AF function is switched on and RDS
transmission date is being received .
If the AF symbol flashes in the display,
the AF function is selected but no RDS
signal can be received at the moment .

PTY FUNCTION

In Radio mode, touch the PTY

PTY

section briefly (or press and hold
the MUTE/PTY button on the front
panel) , to select the Program
type .

PTY Selection of the program type

besides the stations name, some FM
stations also transmit information on the
type of program. This information can
be displayed by your car radio .

Examples of such types of program
are :

SPORT NEWS POP WEATHER ......

With PTY function you can specifically
select stations transmitting a particular
type of program. Touch the PTY range
on screen repeatedly to call up the PTY
selection menu . The message
“PTY SEEK” then appears briefly in the
display .

when PTY has been selected the radio
starts searching for corresponding PTY
information and stops when the PTY
information has been found, “NO PTY”
appears in the display. If the PTY
information being searched for no longer
exists, the PTY function automatically
switches to normal mode .

22

DISC Operation

Basic Operation

During DISC playback, you can touch
the screen to display the following :

DVD 11-0:44:36

LUD

SWF

POP

DISC

11: 08

DVD 11-0:44:36

LUD

VOLUME-

132456

VOLUME-

1.Previous

2.Next

3.Pause

4.Stop

5.Mute

6.Mode

Touch it to select the other item, it
will display the following as below:

POP

SWF

SEL

SEL

VOLUME+

VOLUME+

DISC

11: 08

MOD

MOD

87910

7.To nextpage

8.Volume+(adjustment+)

9.Select

10.Volume-(adjustment-)

TA AF CLKSWF LU D DSP

RDM INT RPT

OSD

Touch it to select the other item .

DVD 11-0:44:36

LUD

SUBTITLE AUDIO

GOTO

Touch it to select the other item .

SWF

POP

TITLE

SET

DISC

11: 08

DVD 11-0:44:36

ENT

DVD 11-0:44:36

LUD

ZOOM

Touch it to select the other item .

SWF

CALL

POP

RECALL

PAIR

DISC

11: 08

Above these operation buttons for
DVD setup.

Touch itfor previous .

23

DISC Operation

Switching the DVD mode

Touch the section on the

MOD

touch screen (or press MOD
button ) to select the DISC mode,
it display like following :

DVD 11-0:44:36

LUD

VOLUME-

Function setup

(different the sourcethedisplayisdifferent)

Stopping Play

Touch the screen the range (or
press the button on remote
control .) To stop the unit playback.
Touch the section or press
button on front panel to start play.

Pause (still picture)

Touch the “ ” section on touch
screen during playback will stop
play temporary, touch it again to
return the normal playback .

Rapid Forward/Rapid Reverse

SWF

SEL

MOD

POP

VOLUME+

DISC

11: 08

MOD

Skipping Track

During DISC playback, Touch the

/ section on the touch screen
to skip to next/back one track.
(You can also press the “ / ”
buttons on front pane to skip to
next / back one track.)

Note :

1. In DVD mode, touch the section
continually twice to back one track .
(Press the button on the front panel
continually twice to back one track .)

2. For some VCD2.0 disc (PBC-playback
control), above these buttons may be
unavailable .

Zoom Function

ZOOM

Repeatedly touch ZOOM section ,
the displaying rate can be 2x, 3x,
4x, 1/2, 1/3, 1/4 .

Press the direction keys / / /
buttons on the remote control or touch
the screen of “ / / / ” section to
move through the enlarged picture .
Note: During JPEG playback , touch the
screen of ZOOM section , the word
“zoom 100%” will display, then you can
touch and hold (more than 2’s) the /
section on touch screen (press briefly
the / buttons on remote control) to
increase /decrease in size .During the
ZOOM mode, use the direction buttons
to move the picture up, down, left, right
of the direction .

During DISC playback, Touch and
hold (for about 2 seconds )the
/ section on the touch screen
(or press the “ / ” on the front
panel and hold for a more than 2’s)
the speed of rapid forward/reverse
changes according to the disc as
follow:

DVD/VCD/CD/MP3:

Normal Playback2x 4x 8x 16x

Loud Function

Touch the LUD section on the

LUD

touch screen to switch the LOUD­NESS function ON and OFF .

Subwoofer Function

touch the SWF section on the

SWF

screen to switch the Subwoofer
function ON and OFF .

24

DISC Operation

Selecting The Play Modes

During the Disc playback, touch the
touch screen, it will display the following
as below :

DVD 11-0:44:36

LUD

VOLUME-

Touch the section to select .

DVD 11-0:44:36

LUD

TA AF CLKSWF LU D DSP

RDM INT RPT

1). Repeat Function

FOR DVD :

Touch the screen the RPT section

RPT

(or press longer RPT on remote
control) to select REPEAT mode
as follow :

CHAPTER REPEAT ON TITLE REPEAT ON

FOR VCD/CD/MP3 :

Touch the screen the RPT section

RPT

(or press longer RPT on remote
control) to select REPEAT mode
as follow :

REPEAT ONE REPEAT ALL

1. Continuously repeat at the current
chapter/track, when selected REP­ONE mode .

2. Select REP-ALL mode to continuously
repeat all chapter/track on the
current disc .

SWF

SEL

SWF

POP

DISC

VOLUME+

POP

DISC

OSD

REPEATALL

REPEAT OFF

11: 08

MOD

11: 08

2). RDM(RANDOM) Function

During DISC playback, Touch the

RDM

RDM section to play in random.
Each playing, the order is different .

(depend on the disc used for VCD).
Touch it again to cancel this function .
(Note: the button is not available .)

3). INT Function

FOR CD :

Touch the screen the INT section

INT

(or long press the 3/INT button on
the remote) to play the previous 6
seconds part of each track/chapter
on disc.(touch it again to cancel)

FOR VCD :

Touch the screen the INT section

INT

(or long press the 3/INT button on
the remote ).it display will
following menu as below :

(touch it again to cancel this mode .)

SELECT DIGEST TYPE:
TRACK DIGEST
DISC INTERVAL
TRACK INTERVAL

Use the UP, DOWN, LEFT and RIGHT
arrows on the remote to select the item,
and then press ENTER to confirm .

FOR DVD :

Touch the screen the INT section

INT

(or long press the 3/INT button on
the remote ). it display will
following menu as below :

(touch it again to cancel this mode .)

SELECT DIGEST TYPE:
TITLE DIGEST
CHAPTER DIGEST
TITLE INTERVAL
CHAPTER INTERVAL

Use the UP, DOWN, LEFT and RIGHT
arrows on the remote to select the item,
and then press ENTER to confirm .

NOTE : For MP3, the 3/INT button is not
available.

25

DISC Operation

DISC Search (GOTO)

DVD 11-0:44:36

LUD

SUBTITLE AUDIO

GOTO

Touch the section , it display will

GOTO

following as below :

Title 01 /01 ,Chapter --/15

0

6

FOR DVD :

Touch the screen the range

GOTO

(or press on the remote ).
Twice, the screen will display the
following message :

SWF

7/

POP

TITLE

GOTO

321

8

GOTO

DISC

11: 08

SET

5

4

9/

+10

GOTO

Note:

Touch and hold the “ ” or “ ” range

7/

9/

on the touch screen , you can select the
title or chapter of DVD . (Only for the
DVD with title /chapter.)

AUX Operation

To connect analogue replay devices.
Use this jack to replay sound of other
replay equipment such as DVD players,
computers, etc. Via the loudspeakers.

AUX IN JACK IN PANEL

AUXIN

Ground

Video

Right

Left

Title 01/01 Time -:--:--

0:10:36

You can select the item you want to
watch through TIME setting by using
numberic buttons . (E.x. 0:10:36)

FOR VCD (With PBC OFF):

Touch the screen the GOTO range

GOTO

(or press GOTO on the remote ).
Once, the screen will display the
following message :

Disc Go To --:--

00:36

Use the numberic buttons to input the
time directly (E.x. : 00:36)

1). Please connect the external device
with stereo jack plug the Aux in socket .

2). Touch the MOD section on screen
or press the MOD button to select the
AUX IN connection.

3). You now hear the sound from the
external device played back through
the loudspeakers .

4). Touch the volume+/- sections on
touch screen or press the VOL+/- on
the remote to adjust the volume level.

26

DISC Operation

ON-SCREEN DISPLAY FUNCTION

During playback, touch the screen

OSD

the section (or press the OSD

OSD

on the remote), it will display the
following as below :

1. DVD:
A.Touch or Press for first time:OSD

TITLE ELAPSED

T 01/01 C 01/38 0:02:06

Title Number, Total Title Number,
Chapter Number, Total Chapter Number
of this Title of the disc currently being
played will be shown on the screen,
along with the elapsed time.

B.Touch or Press for second time:OSD

TITLE REMAIN

T 01/01 C 01/38 3:24:36

2.Example for VCD/SVCD/CD:
A.Touch or Press for first time:OSD

SINGLE ELAPSED

TRACK 01/16 0:00:56

B.Touch or Press for second time:OSD

SINGLE REMAIN

TRACK 01/16 0:05:10

C.Touch or Press for hird time:OSD

TOTALELAPSED

TRACK 01/16 0:31:36

D.Touch or Press for fourth time:OSD

TOTALREMAIN

TRACK 01/16 0:36:26

C.Touch or Press for hird time:OSD

CHAPTER ELAPSED

T 01/01 C 01/38 0:02:56

D.Touch or Press for fourth time:OSD

CHAPTER REMAIN

T 01/01 C 01/38 0:04:32

E. Touch or Press for fifth time:

OSD

The message on the screen will be
cleared.

E.Touch or Press for the fifth time:

OSD

The message on the screen will be
cleared for SVCD and VCD.

NOTE:

For CD and MP3,the message will
always display on the screen.

3.Example for MP3:
Each time is pressed or touch , the

OSD

message displayed on screen changes
as follows:

SINGLE ELAPSED SINGLE REMAIN

27

DISC Special Functions

DVD/VCD Special Function

DVD 11-0:44:36

LUD

SUBTITLE AUDIO

GOTO

1. Multi-subtitle Language
Function (for DVD Only)

SUBTITLE

on the remote) . Each time the button is
pressed or touch, number of the subtitle
language changes in sequential order.

Notes:

- The language number is different
according to the disc.

- Some discs only contain one subtitle
language.

- When no different subtitle language
are recorded, will be displayed
at screen left top corner.

During DVD playback. Touch
the SUBTITLE section on touch
screen(or press the SUBTITLE

2. Multi-Audio Language Function

AUDIO

on the remote .) Each time the button is
pressed or touch , number of the audio
soundtrack language changes on
sequential order.

Notes:

- The language number is different

according to the disc.

- Some disc only contain one language

soundtrack

- When no different language

soundtrack are recorded will be
display at screen left top corner.

For DVD:

During DVD playback , touch
the AUDIO section on touch
screen (or press the AUDIO

SWF

POP

TITLE

SET

DISC

11: 08

For VCD/CD:

during playback, touch the

AUDIO

section of the touch screen or Press

AUDIO

on the remote . It is possible to
switch the sound between monaural
and stereo sound.

MONO LEFT MONORIGHT

STEREO

MIX-MONO

3. Multi-Angle Function

(for DVD Only)

During DVD playback, touch the

section or Press ANGLE button
on the remote . Each time the
button is pressed or touch,number

of the angle changes in sequential
order.

Notes:

- The angle number is different
according to the disc.

- The function only work for disc having
scenes recorded at different angles.

- When no different angle are recorded,

will be displayed at screen left top

corner.

4. Title Menu Function

For DVD:

TITLE

If the DVD has multiple titles
recorded on the disc. It can select
preferred title from the title menu
to start playback.

- During DVD playback, touch the
section or press TITLE button on the
remote .The title menu is display.

- Touch the cursor button shown in TV
screen, select preferred title by the
cursor button and confirmed by touch
ENT button .

ENT

Touch to select

For VCD:

TITLE/PBCPress button on the remote

control while the disc is playing, you can
switch between "PBC on"and "PBC off"
mode.

28

TITLE

Setup

USING THE MENU

DOLBY

....GENERAL SETUP PAGE....

TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Last Memory

Go To General Setup Page

1. Touch the section of DVD setup

SET

LB
ON
ENG
SPDIF/RAW
ON
ON
ON

on touch screen (or press the SETUP
on the remote .)

2.The SETUP menu is displayed.

3.Select the preferred item by touch the
/ / / range on the screen

or by using the / / / buttons .

4.Touch the ENT section on screen or

Press ENTER button on remote to
confirm .

The Following Buttons For Entering

The Selection .

ENT

Previous

EnterUpDown Left

Right

The buttons of the left and right are for
selection of setting type .
The buttons of the up and down are for
selection of the setting program .

Touchto select

Overview Of The Main Menu

DOLBY

()1 ()2 ()3 ()4

(1).GeneralSettings
(2).SpeakerSettings
(3).DOLBY Digital Settings
(4).Preference Settings

GENERAL SETUP

TV Setting

DOLBY

....GENERAL SETUP PAGE....

TV Display

TV Display
Angle Mark

OSD Lang
Spdif Output
Captions
Screen Saver
Last Memory

Set TV Display Mode

16:9

4:3 Pan Scan

1.TV DISPLAY SETUP

This is to select the appropriate TV
aspect (4:3 or 16:9) according to the
connected TV set.

Normal/PS (For 4:3 TV)

Played back in the PAN & SCAN style.
(If connected to wide-screen TV, the
left and right edges are cut off.)

Normal/LB (For 4:3 TV)

Played back in LETTER BOX style.
(If connected to wide-screen TV, black
bands appear at top and bottom of the
screen.)

Wide (For 16:9 TV)

Select when a wide-screen TV set is
connected.

29

Normal/PS
Normal/LB

Normal/LB
Wide

4:3LetterBox

Setup

GENERAL SETUP

DOLBY

DOLBY

....GENERAL SETUP PAGE....

TV Display
Angle Mark

Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Last Memory

Set Angle Mark

ON

ON
OFF

2.ANGLE MARK DISPLAY SETUP

If it is set to ON, when the multi-angle
DVD disc is playing, (the angle
mark) will appears on the screen; if is
set to OFF, the mark will not appear.

LANGUAGE DISPLAYING

DOLBY

....GENERAL SETUP PAGE....

TV Display

English

Angle Mark
OSD Lang

OSD Lang

OSD Lang
Spdif Output
Captions
Screen Saver
Last Memory

English
French
German
Spanish
Italian
Portuguese

....GENERAL SETUP PAGE....

TV Display
Angle Mark

OSD Lang

OSD Lang
Spdif Output

Spdif Output
Captions
Screen Saver
Last Memory

Setup SPDIF

SPDIF OFF

SPDIF/OFF
SPDIF/RAW
SPDIF/PCM

4.SPDIF OUTPUT

This is to activate the audio output
from SPDIF OFF mode to SPDIF/RAW
mode to SPDIF/PCM mode.

DOLBY

....GENERAL SETUP PAGE....

TV Display
Angle Mark
OSD Lang
Spdif Output
Captions

Captions
Screen Saver
Last Memory

ON

ON
OFF

Set OSD language

3.OSD LANG TYPE SETUP

Touch the / section on the touch
screen or press the / button on
the remote to select the preferred
OSD language , then touch the ENT
section to confirm .

Closed Caption

5.CAPTIONS SETUP

Activate the CAPTIONS feature by
selecting ON. And release this feat­ure by selecting OFF.

30

Setup

GENERAL SETUP

DOLBY

....GENERAL SETUP PAGE....

TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver

Screen Saver
Last Memory

Screen Saver

6.SCR SAVER SETUP

Select the SCR SAVER output
ON/OFF.

DOLBY

ON

ON
OFF

SPEAKER SETUP

.....Speaker Setup Page.....

DOLBY

....Speaker Setup Page....

DOWNMIX

DOWNMIX

Set Downmix Mode

LT/RT
STEREO

STEREO

This is to activate the audio output from
DOLBY AC3 5.1 DOWNMIX to 2 channel
mode. Select the preferred SPEAKER
connection by using the cursor buttons.
Select the LT/RT to activate the Dolby
surround compatible output.
Select the STEREO to activate simple
stereo mode.

DOLBY DIGITAL SETUP

DOLBY

....GENERAL SETUP PAGE....

TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Last Memory

Last Memory

Set Last Memory State

ON

ON
OFF

7.LAST MEMORY SETUP

Select the LAST MEMORY output
ON/OFF.

....DOLBY Digital Setup....

DOWNMIXDYNAMIC

Set DRC OFF

DYNAMIC RANGE CONTROL

Select DRC and adjust the dynamic
range of a Doby Digital encoded
program. There are 8 steps between
full compression and off compression.

31

FULL

6/8

4/8

2/8

OFF

Setup

--- PREFERENCES PAGE ---

DOLBY

....Preference Page....

TV Type

TV Type
Audio

OSD Lang

Subtitle
Disc Menu
Parental
Password
Default

Set TV Standard

PAL
AUTO

NTSC

NTSC

1.TV TYPE SETUP

This player can play discs recorded
in either PAL or NTSC format. Select
NTSC format, when you connected to
NTSC TV. Select PAL format, when
you connected to PAL TV. Select AUTO
format, the player TV output format
will according to the DVD disc format..

DOLBY

....Preference Page....

TV Type
Audio

Audio

OSD Lang

Subtitle
Disc Menu
Parental
Password
Default

Preferred Audio Language

English

English
French
German
Spanish
Italian
Portuguese

DOLBY

....Preference Page....

TV Type
Audio

OSD Lang

Subtitle

Subtitle
Disc Menu
Parental
Password
Default

Preferred Subtitle Language

English
French
German
Spanish
Italian
Portuguese
Off

Off

3.SUBTITLE LANGUAGE SETUP

Select the preferred SUBTITLE
language by using the cursor buttons.

DOLBY

....Preference Page....

TV Type

English

Audio

OSD Lang

Subtitle
Disc Menu

Disc Menu
Parental
Password
Default

Preferred Menu Language

English
French
German
Spanish
Italian
Portuguese

2.AUDIO LANGUAGE SETUP

Select the preferred AUDIO sound­track by using the cursor buttons.

4.DISC MENU LANGUAGE SETUP

Select the preferred DISC MENU
language by using the cursor
buttons.

32

Setup

--- PREFERENCES PAGE ---

Age control

DOLBY

DOLBY

....Preference Page....

TV Type
Audio

OSD Lang

Subtitle
Disc Menu
Parental

Parental
Password
Default

4PG13
5PGR
6R
7NC 17
8ADULT

8ADULT
OFF

Set Parental Control

5.PARENTAL

Select suitable parental guidance by
the cursor buttons and conformed by
pressing ENTER button.

DOLBY

....Preference Page....

TV Type
Audio

OSD Lang

Subtitle
Disc Menu
Parental
Password

Password
Default

Changed Password

CHANGE

CHANGE

6.PASSWORD

Select the change and press ENTER
button. Type the old password (The
initial factory code is ) and key
in 4 characters password now you
want to use, and retype again to
confirm key in correctly.

1379

....Preference Page....

TV Type
Audio

OSD Lang

Subtitle
Disc Menu
Parental
Password

RESET

Default

Default

RESET

Load Factory Setting

7.DEFAULTS

Select reset to become factory initial
setting.

DEFAULTS TABLE

GENERAL SETUP

SPEAKER SETUP

DOLBY DIGITAL

PREFERENCES

TV DISPLAY

ANGLE MARK

OSD LANGUAGE

SPDIF OUPUT

CAPTIONS

SCR SAVER

LAST MEMORY

DOWNMIX

DYNAMIC

TV TYPE

AUDIO

SUBTITLE

DISC MENU

PARENTAL

PASSWORD

NORMAL/LB

ON

ENGLISH

SPDIF/RAM

ON

ON

ON

STEREO

OFF

AUTO

ENGLISH

OFF

ENGLISH

8 ADULT

1379

33

Bluetooth Operation

Bluetooth Car Kit User Manual

1.“Pair”To Your Bluetooth Phone

Prior to using the Car Kit for the fist time,
you must pair it with a Bluetooth-enabled
mobile handset.
The following steps describes pairing
the instruction for a typical Bluetooth­enabled mobile handset.

Touch the touch screen , the touch
operation menu will display.
Touch the “ ” range to select the item,
it will display following as below :

DVD 11-0:44:36

LUD

ZOOM

Touch to select

1). Place the Car Kit and mobile

handset in 3 meters apart.

2). Put the Car Kit in pairing mode.

.A PressthePOWERbuttontoturnON,

the ICON will flash on the TFT .

B. Touch the “ ” section on touch
screen (or Press and hold the “ ”
button on remote control ) until the word
“ ” display, it’s

BLUETOOTH PAIRING

now ready for pairing.

3). Set your bluetooth phone to

“discover” the Car Kit .

Following your phone’s instruction
guide for details, active your mobile
handset’s Bluetooth function, the
handset will search for accessible
Bluetooth devices.

4). Your phone will find this Car Kit .

Select this Car Kit from the list.

SWF

CALL

POP

RECALL

PAIR

PAIR

DISC

11: 08

PAIR/

5). Enter passkey , then press

OK

“ ” to pair the Car Kit and the
handset, the word “ ” , will

“”8888

PAIROK

display in the TFT .

6). Select the “ ” from the list

CONNECT

on the phone, if you connect success­fully , the ICON remains solid on
the screen , then you can operate the
function of blue-tooth about the unite .

Important:

If the pairing can not be completed
within approximately 2 minutes , whiles
the pairing mode is activated, and you
will need to reattempt pairing
(See steps 2-5 above) .

After pairing is completed, if the
ICON is stilling flash on the TFT ,
please follow the steps to to reattempt
pairing through your handset until the

ICON remains solid on the screen.

2. Using The Bluetooth Car Kit.

Once connecting is complete, you may
access the following function. Some of
the below mentioned functions only
accessible for handset supported with
hands-free profile.

Make a call

Touch the “ ” section on the
touch screen (or press and hold the
“ ” button on the remote control) ,

PAIR/

the word “ ” will display
on the TFT . then you can touch the
number section on screen (or dial the
number on the remote ) and then touch
the “ ” section (or press briefly the
“ ” button on the remote control).

PAIR/

Note:

When you dials the wrong number,

touch and hold the “ ” section (or
press the “ ” button on the remote)
to delete it.

34

CALL

DIAL NUMBERS

8/

Bluetooth Operation

Touch the “ ” section on the screen,

CALL

it will display like the following :

DIAL NUMBERS

4

1

32

9/

8/

7

6

5

0/

DIAL NUMBERS

Note:

ACCEPT

VOLUME-

VOLUME+

“ ” and “ ” serves as the “ ”

REJECT

and “ ” button on your mobile handset .

Answer a call

After you hear the ring tone (the incoming
telephone number will display on the
TFT LCD) .
Touch the “ ”section on the touch
screen (or press the “ ” button

ACCEPT

PAIR/

briefly on the remote control ) to listen .

Call Transfer

During talking mode , user can touch the
screen of the “ ” range (or press
briefly the “ ”button on remote
control.)totransfertheaudio from the
unit back to the mobile phone for privacy
reason .

ACCEPT

PAIR/

End/Reject a call

In Bluetooth menu, touch the “ ”
section on screen ( or press the “ ” on
the remote the TFT LCD display
“”.CALL HOOKED/CALLEJECTED

REJECT

Redial last number

In Bluetooth menu, touch the “ ”
(or press and hold for more than 2’s the

“ ” button on the remote control ) ,

the “ ”

DIAL LAST CALL/DIALOUT NOW

will display on the TFT LCD.

RECALL

Adjust the Volume

During conversation in progress,
tune the Volume switch until you reach
the desired volume level.

Play MP3 music

In Bluetooth menu, touch the MOD
section on the touch screen ( or press
MOD to select the “BT MUSIC”, you
can play the MP3 from your mobile
handset.

BT MUSIC

LUD

VOLUME-

Touch to select

Note:

please make sure it support the
Bluetooth profile.A2DP

Note:

Before using the function of the Blue­tooth about the unit , please check your
phone’s instruction guide or contact

phone manufacture if you are not sure
if your phone supports the hands-free
Bluetooth function .

When operating the function of blue­tooth about the unit , you need make
your call-phone and the unit success­fully for one time. Afterwards, you only
need to take on the power and the
function of blue-tooth will work in three
minutes automatically if you want to
operate the function of blue-tooth .

If you want not to use the function of
the Blue-tooth about the unit , you can
select the Bluetooth OFF .
(The method to see the page 16.)

35

SWF

SEL

POP

VOLUME+

DISC

11: 08

MOD

Other Main Operation

USB Operation

Following the diagram below, connect
your USB device to the front panel
USB port . If it is properly connected,
the device will be mounted and start
playing automatically.

you can also select the desired item of
the USB device The buttons on the
remote control, on the device, have the
same functions as the touch buttons
of this touch screen have .

In USB Playback mode

Use the UP, DOWN, RIGHT or LEFT
buttons to navigate to and select files
to play, and press ENTER to begin
playback (or viewing, in the case of
JPEG files). To skip to the next or
last track, touch or press the or .
Press the or buttons for Fast
Forward or Fast Reverse playback.

REPEAT

by repeatedly pushing until
the desired mode is found.

.

play modes are also available

REPEAT

Changing From DISC to USB Playback
Modes

If the disc present in the player is an
MP3 disc, touch section on screen
or press the STOP on remote once then
touchorpresstheGOTOtoUSB
playback.

If the disc present in the player is an
DVD or VCD or CD disc, touch on
the screen or press STOP twice on the
remote then touch GOTO section on
the screen or press the GOTO button
on the remote to USB playback.

Changing From USB to DISC Playback

Modes

If you are in USB Playback mode and
wish to begin playback of a disc already
in the player, touch the range on the
touch screen or press the STOP on the
remote once. Then touch GOTO range
on the screen or press the GOTO on the
remote and the player will switch to
DVD/VCD/CD/MP3 Playback mode.

Important Note:

To prevent damage to the USB device,
do not remove or disconnect it during
playback. it is also a good practice to
remove the USB drive during disc
playback.

36

Other Main Operation

MP3/WMA/JPEG/MPEG4 DISC PLAY

When you insert a disc which contains MP3, WMAor JPEG files, the different file
types are detected, and a list of the files are produced, as shown in the diagram
below.

56

4

3

003/112

2

Mp3

Mp3

1

Mp3

..............

00:56 04:07

K

P

woman

new

ton

Repeat one

1

Touch the screen, it will display the following as below :

when the parking brake is applied .()

1

. Current track(file)(highlighted bar)
. Current track (file) number/total

2

number of tracks(files) in the current
folder.

. Elapsed playing time of the current

3

track(

not available for JPEG disc)

. total playing time.

4

( not available for

JPEG disc)

. Operation mode icon. (Play),

5

(stop), (pause), (forward)

(reverse).

. Selected playback mode

6

MP3 10-0:44:36

LUD

SWF

SEL VOL+VOL-

POP

DISC

11: 08

MOD

Touchrepeatedly

MP3 01-0:44:36

ENT

Touch the / / / sections on touch screen (or Use / / / on remote
control ) to select the item or folder, then touch the ENT section (or press ENTER
button on remote) to confirm.

Touch the on the touch screen (or Pressing button on the remote control)

RPT 2/RPT

repeatedly can select two kinds of repeat play mode.

REP-ONE:

Play the same song over and over again.

REP ALL:

Play all songs in the discover and over again.

Moving To Another Track :

1. Touch the or section to skip a track ahead or back.

2. Swing the SEL knob in the or direction to skip a track ahead or back.

Fast Forward/Fast Backward

1. Touch longer (more than 2’s ) the “ / ” range for fast forward or fast backward .

2. Swing and hold (more than 2’s )the SEL knob in the direction of the or button
for forward or backward .

37

Specification

Supply Voltage: 12V DC (11V-15V)
Current Consumption: Less than10 A
Signal System: Compositive video 1.0Vp-p 75
Power Output: 80W x 4
Discs Played: (1)DVD-VIDEO Disc

5"(12 cm) single-sided, single-layer
5"(12 cm) single-sided, double-layer

(2)Compact Disc (CD-DA, VIDEO CD)

5"(12cm) disc

Audio Signal Output:
Characteristics: (1)Frequency Response 20 Hz - 20 KHz

RADIO Section:

Frequency Coverage: 87.5 to108 MHz 87.5 to108 MHz 87.5 to107.9 MHz
IF: 10.7 MHz 10.7 MHz 10.7 MHz
Sensitivity (S/N = 30 dB): 15 dBu 15 dBu 15dBu

Frequency Coverage: 522 to1620 KHz 522 to1620 KHz 530 to1710 KHz
IF: 450 KHz 450 KHz 450 KHz
Sensitivity (S/N = 20 dB): 40 dBu 40 dBu 40 dBu

5-Channel Line Out (2 Volts)

(2)S/N Ratio 90 dB (JIS)
(3)Wow and Flutter Below measurable limits

For 3 Bands For 2 Bands For 2 Bands
(Europe) (Europe) (U.S.A.)
FM FM FM

MW MW AM

TFT Monitor :

Monitor Screen Size: 5 Inch Wide
Number of Pixels: 960 X 234 pixels
Color System: NTSC/PAL

Bluetooth Section :

Bluetooth specification: V1.2 Class 2
Bluetooth profile supported: Headset, Handsfree and A2DP profiles
Range of frequency: 2.4GHz Spectrum

NOTE: Specifications and design are subject to modification, without notice,
due to improvements in technology.

38

Trouble Shooting

Before going through the check list, check wiring connection. If any of the problems
persist after check list has been made, consult your nearest service dealer.

SYMPTOM POSSIBLE CAUSE SOLUTION

If the power supply is properly
connected to the car accessory
terminal,switch the ignition key

"ACC".

to

Replace the fuse.

Remove the disc before putting
in another.

Insert the disc with the label
facing upward.

Clean the disc or try to play a
new one.

Permit the vehicle interior to cool
down before using the player.

Be sure the proper TV system
settings are selected and color
adjustments are appropriate.

Properly connect the parking
brake wire to the unit.

For safety reasons no television or
video images are displayed while
the vehicle is moving.
Engaging the parking brake will
enable images to be displayed.

Check and make sure the disc
format and TV format are the
same.

Use a disc with JPEG files.

Re-record the disc in a compliant
application. You may need to
read the instructions for your
disc recording software.

Remove and re-insert the front panel,
making sure it is properly seated.
Clean the connector on the back of the
rear panel with a clean cotton swab
and isopropyl (rubbing) alcohol. If the
above does not resolve the problem,
press the RESET button.

Select a station manually

Insert the antenna cable firmly

No power

Disc can not be
loaded or ejected

The screen image
is black and white
when you expect
color.

No screen image
appears.

The picture color
is poor or faint.

JPEG disc can
not be played
back.

Buttons and/or
display do not work
properly, or not
at all.

The radio does
not work.

The car ignition switch is

not on.

The fuse is blown.

There is already a disc in
the player.

The disc has been
inserted upside down.

Be sure to insert discs
label side UP.

Temperature inside the
car is too high.

The color system is
set incorrectly.

The unit is not connected
to the parking brake
detection switch.

The parking brake is not
engaged.

The disc format and the TV
formats are mismatched
(conflict of NTSC and PAL).

No JPEG files are
recorded on the disc.

JPEG files are not
recorded in a compliant
formant.

The built-in microcom­puter is not operating
properly due to noise.

The antenna cable is not
connected.

The signals are too weak.

39