Boss Audio BV7985 User Manual

BV7985

Contents

In-Dash AM/FM
DVD/MP3/CD Receiver With

4.3 Widescreen Touchscreen TFT Monitor
With Front Panel USB Port

Precautions .....................................

Safety Information.........................

Disc Notes ....................................

Installation ....................................

Detaching the control panel ...............

Changing the control panel ...............

Electrical Connection ....................

Remote Control ............................

Control Panel ................................

Touch Panel

Unit Keys .......................................

Basic Operations

TFT Monitor

Rear View Camera

Audio Quality Adjustments

Setting Audio Mode ..................... ...

Reset The Factory Setting

Scroll Caption Adjustments ..............

Radio Operations ..........................

Listening to the radio .......................

Storing stations in memory ...............

Listening to a preset station .............

RDS Function ............................. ...

DISC Operations ...........................

Basic Operations ............................

Select Playback Mode .....................

AUX Operation ...............................

On-Screen Disc Operations .............

....................................

..........................

Adjustment .................

........................

...............

................

10

13

13

14

17

17

17

17

18

18

18

19

19

19

20

20

22

22

24

25

26

DISC Special Functions ................

2

Selecting audio languages ................

3

Selecting Subtitles ..........................

4

Selecting multi-angle views ..............

5

Title menu function ..........................

7

Setup .............................................

8

General Setup ................................

9

Speaker Setup ...............................

Dolby Digital Setup ........................

Preferences Setup ..........................

Defaults Table ................................

Other Main Operations ...................

USB Operations ..............................

MP3/WMA/JPEG Play ......................

MPEG4 Play ...................................

Specifications ...............................

Trouble Shooting ..........................

27

27

27

27

27

28

28

30

30

31

32

33

33

34

34

35

36

1

Precautions

THANK YOU FOR PURCHASING THIS CAR DVD PLAYER .

Before operating the unit, read this manual thoroughly and keep it handy
for future reference .

To avoid injury or accident , read the following precautions before

installing and operating the unit .

ON INSTALLATION

DO NOT install any receiver in locations where;

- it may obstruct the steering wheel and gearshift lever operations, as this
may result in a traffic accident.

- it may obstruct the operation of safety devices such as air bags, as this
may result in a fatal accident.

- it may obstruct visibility.

DO NOT operate any receiver while manipulating the steering wheel, as

this may result in a traffic accident.

The driver must not watch the monitor while driving.
IF THE DRIVER watches the monitor while driving, it may lead to

carelessness and cause an accident.

IF YOU NEED to operate the receive while driving, be sure to look ahead

carefully or you may be involved in a traffic accident.

IF THE PARKING BRAKE is not engaged.“ ParkingBrake” flashes on the

monitor, and no playback picture will be shown.

- This warning appears only when the parking brake wire is connected to

the parking brake system built in the car ( refer to the electric connection)

ABOUT THE LIQUID CRYSTAL DISPLAY (LCD) PANEL

Do not press too firmly on the LCD panel on the unit as doing so can distort
the picture or cause a malfunction . The picture may become unclear , or the
LCD panel may be damaged .

NOTES ON CLEANING

-Clean the LCD panel with a slightly damp soft cloth.

-Do not use solvents such as benzine, thinner, commercially available
cleaners or antistatic spray .

-Do not use alcohol to clean the screen .

If your car was parked in a cold or hot place, the picture may not be clear .

The monitor is not damaged . The picture will become clear the temper-

ature in your car becomes normal .

2

Safety Information

CAUTION:

THIS DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DVD
PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE .
HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE
THE DVD PLAYER CORRECTLYAS INSTRUCTED.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT
REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.

THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.

COPYRIGHT PROTECTION

This product incorporates copyright protection technology that is protected
by method claims of certain U.S. Patents and other intellectual property rights
owned by Macrovision Corporation and other rights owners.Use of this
copyright protection technology must be authorized by Macro vision Corporation,
and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.

REGION MANAGEMENT INFORMATION:

This DVD Player is designed and manufactured to respond to the Region
Management Information that is recorded on a DVD disc. If the Region number
described on the DVD disc does not correspond to the Region number of this
DVD Player, this DVD Player cannot play this disc.

3

Disc Notes

Disc formats supported by this
player

DVD

VCD

CD

MP3

Audio and Video
Discsize12cm

Audio and Video
Discsize12cm

Audio
Discsize12cm

Audio
Discsize12cm

Discs which cannot be played
with this player

DVD-RAM
CDV
CDG

Handling and Cleaning

Dirt, dust, scratches and warping disc

will cause misoperation.
Do not place stickers or make
scratches on discs.
Do not warp discs.

A disc should always be kept in its
case when not in use to prevent from
damaging.
Do not place discs in the following
places:

1. Direct sunlight

2. Dirty, dusty and damp areas

3. Near car heaters

4. On the seats or dashboard

Disc Cleaning

Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moistured with isopropyl (rubbing)
alcohol. Never use solvents such as
benzine, thinner or conventional record
cleaners as they may mar the surface of
the disc.

Note:

A disc may become somewhat scratched
(although not enough to make it

unusable) depending on your handle it
and conditions in the usage environment.
Note these scratches are not an
indication of any problem with the player.

Label side
up

Do nottouch
the
underside
of thedisc

Do not
bend

Wipe the disc from
center
toward theoutside
edge

Preparing New Discs with

Rough

Spots

A new disc may have rough edges on
its inside and outside edges. If a disc
with rough edges is used, the proper
setting will not be performed and the
player will not play the disc. Therefore,
remove the rough edges in advance
by using a ball point pen or pencil as
shown on the right. To remove the
rough edges, press the s ide of the pen
or pencil against the inside and outside
edges of the disc.

Rough spots
on
outside edge

Ball pointpen
or pencil

Rough spots
on inside
edge

4

Installation

NOTES:

Choose the mounting location where the unit will not interfere with the normal
driving function of the driver.

Before finally installing the unit, connect the wiring temporarily and make sure
it is

all connected up properly and the unit and the system work properly.

Use only the parts included with the unit to ensure proper installation. The use
of

unauthorized parts can cause malfunctions.

Consult with your nearest dealer if installation requires the drilling of holes or
other

modifications of the vehicle.

Install the unit where it does not get in the driver s way and cannot injure the
passenger if there is a sudden stop, like an emergency stop.

If installation angle exceeds 30 from horizontal, the unit might not give its
optimum

performance.

'

30

Avoid installing the unit where it would be subject to high temperature, such
as from
subject to dust,

DIN FRONT/REAR-MOUNT

This unit can be properly installed either from "Front"(conventional DIN
Front-mount)
screw holes at the sides of
illustrated installation methods.

USA/EURO FREQUENCY SWITCH

On the right of this device, there is a USA/EURO frequency switch, you can select

the desired radio frequency before installing .

direct sunlight, or from hot air, from the heater, or where it would be

dirt or excessive vibration.

or "Rear"(DIN Rear-mount installation, utilizing threaded

the unit chassis). For details, refer to the following

USA/EURO Frequency Switch (radio frequency
switch for selecting between the USA and EUROPE
frequency band. )

5

Installation

SPRING WASHER

PLAIN WASHER

TAPPING SCREW

DASH BOARD

HEX NUT

METAL MOUNTING
STRAP

CONSOLE

SLIDE BRACKET
HOUSING

HEX BOLT

KEY PLATE

PLASTIC COVER

KEY PLATE

If you want to take CHASSIS out of the SLIDE BRACKET HOUSING,
first remove the PLASTIC COVER of the both sides away, then insert

the two KEY PLATE into left and right side of chassis as above illustration.

6

Installation

How To Remove And Install The Front Panel

When detaching or attaching the control panel, be careful not to damage the
connectors on the back of the control panel and on the panel holder.

Detaching The Front Panel

Before detaching the control panel, be sure to turn off the power.

1). Press the release button and the left hand side of the front panel will release.

RELEASE BUTTON

2). Pull-off the front panel and keep the front panel into the case .

PROTECTIVE CASE

Attaching The Front Panel

1). First insert the right hand side of the front panel into the hollow of the unit .
(NOTE : the “bulge” point on the panel must be attached into the hollow of the unit .)

2). Gently push the left hand side of the front panel until you feel a “ Click” .

Hollow

Bulge

7

Panel Angle Adjustment

CHANGING THE CONTROL PANEL ANGLE

When you want to change the viewing angle of the operating unit to play,
you can touch the secion on the touch screen (or press the button
on the panel ) repeatedly to select the desired angle as follows:

Angle 1

Angle 2

Angle 3Angle 4

Caution:

Do not insert your finger behind the control panel.

8

Electric Connection

WIRING CONNECTION

MAIN UNIT

RADIO ANTENNA JACK

IGNITION

SWITCH(B+)

CONSTANT

12 VOLTS

GROUND(B-)

AUTO ANTENNA
&TURNON

RED

YELLOW

BLACK

FRONT

Lch SPK.

REAR

Lch SPK.

BLUE

FUSE

CHOKE
BOX

FUSE

WHITE/BLACK

GREEN/BLACK

ISO CONNECTOR

WHITE

GREEN

FRONT RCA OUTPUT

CABLE

GREY

GREY/BLACK

VIOLET

VIOLET/BLACK

WHITE

GREEN

YELLOW

RCA CABLE

REAR RCAOUTPUT

CABLE

FRONT

Rch SPK.

REAR

Rch SPK.

(B+)12V
REAR CAMERASWITCH

(B-)PARKING BRAKE

REAR CAMERAINPUT

GREY SUBWOOFER
VIDEO OUT2 YELLOW

COAXIAL OUT BROWN

RCH RED

LCH WHITE

FRONT RCA RED R

VIDEO OUT 1YELLOW

FRONT RCA WHITE L

Note :
The "PARKING BRAKE" wire must be connected to the parking brake system of
your car. When the parking brake is engaged, the LCD screen will be allowed to
view your video. If not, the screen will produce an image saying,
"PARKING BRAKE" This is a safety feature designed for the driver not to watch a
video while driving. The video output on this unit is not affected by this.

9

Remote Control

Ref #

1

2

3

4

5

6

7

Button

CLOCK

MODE

STOP

SETUP

MO/ST
(AUDIO)

SUBTITLE
LOCAL/
DISTANT

REPEAT

17

15

19

7

2

13

6

22

14

18

11

10

4

8

Function

Press it briefly to view the clock time , Press again to return to
normal display mode . Press longer to set the time .

Press repeatedly to cycle through the various modes:
RADIO>DISC>AUXIN.

Press once to pause playback. Press PLAY/PAUSE to resume
playback. Please note: if you press STOP twice, playback will
start at the beginning of the disc.

Press this button to open the SETUP menu.

In Radio mode, press this button to change between Mono and
Stereo reception modes (when a station is weak, sometimes
switching to Mono will improve sound quality). In Disc Playback
mode, pressing this button opens the AUDIO setup menu for
making changes to the way the soundtrack is reproduced.

In DVD Disc Playback mode, pressing this button will allow you to
change the subtitle language on discs which have this as an
option. In Radio mode, press this button to change the radio
reception sensitivity in stations are near or far.

Pressing this button will open a menu presenting you with the
playback repeat options available for that kind of disc.

3

20

21

9

26

24

16

5

1

23

12

25

10

Remote Control

Ref #

8

9

10

11

12

13

14

15

16

17

Button

GOTO

/

SEL

VOL+/-

///

Menu
SubWoofer

()

BAND
(OSD)

(POWER)

PLAY/
PAUSE

MUTE

Function

Press it button to begin playback at a moment in the program you
designate. Use number buttons to enter the data that is needed.

Press these buttons to skip ahead or back one track. (Note: In
DVD mode, press continually the twice to skip back one)

Press this button repeatedly to cycle through the various audio
and video adjustments you can make: Volume, Bass, Treble,
Balance, Fader, Color, Brightness, Contrast and Tint.

Use these controls to adjust the volume level.

Press to navigate the various menus present in the product.

Press this button briefly to display the root level directory of a
DVD disc. Press and hold this button to turn on or off the
SUBWOOFER output.

In Radio mode, press this button repeatedly to switch between
the five radio bands: FM1 > FM2 > FM3 > AM1 >AM2.
In Disc Playback modes, Press this button to see information
about the disc currently in play.

Press this button to turn the unit ON , press and hold to turn the
unit OFF.

In Disc Playback mode, press to pause playback. Press again to
start where playback stopped.

Press this button to turn off the audio. Press again to restore the
sound to its prior volume level.

18

19

20

21

22

23

TITLE/
PBC(A/P)

ANGLE

EQ/LOUD

/

ENTER

When playing a DVD, pressing this button will open the TITLE
menu which is recorded on the DVD. When playing a VCD disc,
press this button to create a PBC (Playback Control) menu for the
disc to assist in making playback selections. In Radio mode,
press and hold this button to start the Auto-Program mode, during
which the tuner will scan for all strong stations and assign them
to the radio preset buttons.

Press this button to adjust the screen viewing angle (see page 8).

For DVD discs which have alternate viewing angles encoded,
when you see the "angle mark" symbol advising you that these
angles are available, press this button to see them.

Press repeatedly to cycle through the different equalizer curve
presets you may wish to use for enhanced listening.

In Disc Playback mode, press for fast forward/reverse playback.

This button is used to confirm selections and settings within
many of the menus in the OSD system.

11

Remote Control

Ref #

24

25

26

Button

0-9

+10

1-6

These buttons are used for numeric entry in many different menus.
In addition, in Radio Mode (when RDS is engaged), 0 serves as
the TA button and 9 serves as the AF button.

This button is used with the other number buttons for use with
two-digit number entries.

Six numbered preset buttons store and recall stations for each band .

Function

Preparing the Remote Control

Inserting the Battery

1.First push to inside as the direction indicated by the arrow (See )And then

Remove the battery holder as the direction indicated by the arrow (See ).

2.Replace the battery Set a new battery property with (+)side up as illustrated

(See ).

3

3.Insert the battery holder. Push in the holder to the original position(See ).

1

2

4

Using the Remote Control

Face the remote control towards the player front face IR mark (remote control signal

receiver).

Operation angle: About 30 degree in each the direction of the front of the IR mark.

Note :

The lithium cell in the battery compartment of remote control has been secured for

transport with a foil . Before initial use please remove this foil so that the remote

control is ready for operation .

12

Control Panel

Key Functions

Touch Panel

123456

VOLUME-

X

CH

VOLUME-

5

SEL

Touch Screen Key :

1. (Angle) : Changing the viewing

angle of the operating unit .

2. TA : Turning pre-switching for traffic

announcements on and off . (For RDS)

3. AF : Switch on and off

and alternative frequency. (For RDS)

4. (Eject) : Touch it to insert and

eject the DISC .

SEL

AFTA

VOLUME+

MOD

78910

MU/PTY

AFTA

MOD

VOLUME+

SEL

CH1-6

7. : Previous

8. Volume+ : volume adjustment (+)

9. SEL : select the menu of the

Sound/Picture

10. Volume- : volume adjustment (-)

5. : To switch of the sound .

6. MOD

: operating mode selection .

13

Control Panel

Unit Keys :

1123

5

1814

15

8

11

MU/PTY

X

CH

SEL

CH1-6

5

16

9

17

2

1. REL BUTTON

Press this button to release the front panel for removal . Refer to see page 7.

2. (POWER On/Off )BUTTON

Press this button to switch the device on. WELCOME appears in the display.
Press it again to switch the device off. SEE YOU appears in the display.

3. VOL+/ VOL- KNOB

In normal mode, this knob is used to increase or decrease the volume. It is also
used as an UP/DOWN knob when audio or video settings are being adjusted
when accessed using the SELECT button.

4. SELECT KNOB

To access the available adjustment settings for audio and video, press this knob

repeatedly to cycle through and select them:

Buzzer Volume Bass Treble Balance

13

6

4

7

10

Tint Contrast Bright Color Fader

5. BAND BUTTON

In Radio mode,

Fm3, AM1(MW1), AM2(MW2) .

press it repeatedly to select the desired radio band: FM1, FM2,

6. TA/AF BUTTON

TA Function [traffic Announcement] Button(for Rds Only)

In RADIO mode
When you swing briefly the SEL knob in the TA/AF direction , the TA function is
activated, the TA symbol appears in the display . ( swing it again to turn off . )

14

Control Panel

AF [Alternative Frequencies]

Swing and hold (for about 2 seconds) the SEL knob in the TA/AF direction , the AF
function is activated. The AF symbol appears in the display . (Swing and hold it
again to cancel this function .) The function about RDS to see page 20 .

In Radio mode, press and hold the SEL knob for a long time to access the

Note:

selection menu:

Repeatedly pressing the SEL knob to select the item and by using the
VOL+/- to change .

7. APS, DISPLAY FUNCTIONS (using the SELECT knob)

Scan Function

In Radio mode, swing the SEL knob briefly in the APS/DISP direction , the radio
briefly plays all the preset stations of the frequency band .

Automatic Preset Setup

In Radio mode, swing the SEL knob in direction of the APS/DISP for about 2
seconds to active automatic station storage. The radio searches within the
current frequency band, e.g. Fm1, for the stronger signal level until the search
cycle has finished . The six strongest stations are then allocated to the correspo­nding storage locations . Then the station of the first storage location is set .

Display ON/OFF Function:

In Disc mode, swing the SEL knob briefly in the direction of APS/DISP to turn off
the display image (the monitor on the unit only) , the sound will stay on.
(Swing it again to resume the playback picture mode.) You can press SEL knob
briefly to select the “BG COLOR” by repeatedly pressing the SEL knob, then
rotate the VOL+/- to select the background color among of the

“AUTO, BG COLOR: 01........BG COLOR: 11”, in “AUTO” mode, the monitor of

unit will change the background color automatically .

REG ON/REG OFF, PI MUTE/PI SOUND,AF ON/AF OFF .

8. MU (MUTE)/PTY BUTTON

Press this button briefly to select the MUTE or NOT .

In Radio Mode,

of the program type (examples of such types of program are : NEWS, POP.....)

press this button and hold for a bout 2 seconds to select the PTY

9. ANGLE (Screen position)

Press this button repeatedly to cycle through the different positions.

10. /CH 1-6 BUTTON(RADIO PRESET)

In Disc Playback Mode

A).

Press this button to pause playback, press it again to resume playback.

In Radio Mode

B).

Press this button repeatedly to preset station. (Please refer to see page 20 .)

15

Control Panel

11. / BUTTONS (TUNE, SEEK, TRACK, SKIP UP/DOWN)

A) In DISC, USB mode:

if you wish to jump forwards or backwards press the SEL button (4) briefly in
the or direction. (Note: in DVD mode, press the SEL button continually
twice in direction to skip back one track during playback.)
To go through the tracks keep the SEL button pressed in the or direction
for about 2 seconds. FF X2 appears in the display. Operating the SEL button
again, the speed of rapid forward/reverse changes according to the disc
as follow:

DVD/VCD/CD/MP3:

B) In Radio Mode:

Move the SEL button in the direction of or in order to set a radio station
manually. Keep the SEL taste pressed down in the or direction in order
to start the search for a radio station automatically.

12. MODE BUTTON

Press it repeatedly to select AUX IN , RADIO and DISC mode.
During the USB playback, you can press STOP button and then press GOTO
button to select the DISC mode.

13. (EJECT) button

Press it button to eject the DISC or insert the DISC to start play .

Normal Playback 2x 4x 8x 16x

14. RESET button

Press this button to return to the factory settings .

15. IR sensor

16. AUX Input Jack

For information about connecting a AUX device, please see page 25 .

17. USB PORT

For information about connecting a USB device, please see page 35.

18. TFT Display (liquid crystal display)

The operation of the TFT, please see page 17.

16

Basic Operation

POWER On/Off

Press it to switch the device ON,
press it again to switch the
device OFF.

Ejecting The Disc

Use your finger to touch the

range on touch screen ,

the control panel of the unit

you can insert the disc or eject the disc .
(You can also press the button on the
front panel to eject the disc or insert the
disctostartplay.)

will swing downwards . Then

Select Sources

Touch the MOD

MOD

DISC

repeatedly
section on the screen, the
signals will display in the
screen as follow :

AUX IN

RADIO

Touch screen

VOLUME+

Touch the screen the
VOLUME+ to increase
the volume level .

VOLUME-

Touch the screen the
VOLUME- to decrease
the volume level .

Mute Function

Use your finger to touch
the section , it will
mute the sound but the
disc continues playing.
Touch it again to resume .

Setting The Clock

CLK

Touch the CLK section on the
screen and hold for about 2
seconds the hour will flash ,
rotate the VOL+/- to adjust .
Touch it again, the minute
will flash, then use the VOL+/­to adjust .

Volume Adjusting

Volume button

A

Revolve : clockwise to increase /

Anticlockwise to decrease .

B

Press the VOL+/- on remote control ,

to change the volume level .

Setting The Buzzer ON/OFF

SEL

17

Touch the SEL section on the
touch screen to select the

BUZZER

the VOL+/- (or rotate the vol+
/vol-) to switch the

ON/OFF .

item, and then touch

BUZZER

Basic Operation

LCD Monitor Adjustment

During DISC playback, use your

SEL

finger to touch briefly the SEL
section on the screen (or press
SEL button on front panel
to access the Picture

selection menu, by repeatedly touch the
SEL section, and then touch the VOL+/­(or rotate the VOL+/-) to adjust the
selected mode .
(The corresponding value will show on
the monitor )

DVD 11-0:44:36

LUD

touch to select

touch to adjust

Volume Bass Treble Balance

SWF

SEL VOL+VOL-

POP

DISC

11: 08

MOD

)

mode

Rear View Camera

When you connect a rear view camera to
this system. It will display the image in a
mirror like fashion. Once you engage the
car into Reverse the screen will show the
camera image. Then once you take the
car out of Reverse the screen will go
back to the previous mode.

Audio Quality Adjustment

During DISC playback, use your

SEL

finger to touch briefly the SEL
section on the screen (or press

to access the Sound mode selection
menu, by repeatedly touch the SEL
section, and then touch the vol+/­(or rotate the vol+/-) to adjust the
selected mode . (The corresponding
value will show on the monitor )

Volume Bass Treble Balance

SEL button on the front panel )

FaderBuzzer

Contrast Bright ColorTint

FaderBuzzer

Contrast Bright ColorTint

ADJUSTABLE ITEMS:

COLOR: 0 to 32
Adjust the color for the picture-lighter or
darker.
BRIGHT:0to32
User can use the Vol+/- knob to adjust
the brightness level from 0 to 32 .
CONTRAST: 0 to 32
To adjust the contrast of the bright and
dark portion.
TINT:0to32
Adjust the tint if the human skin color is
unnatural.

-Adjustable when NTSC is selected for
NTSC/PAL .

““

““

DVD 11-0:44:36

LUD

touch to select

touch to adjust

It`s depend on your habit to setup the data .

ADJUSTABLE ITEMS:
Volume:

Adjust volume level by using VOL +/-.

-14to+14

Bass:

Adjust bass level by using VOL +/-.

Treble:

-14to+14

Adjust treble level by using VOL +/-.

18

SWF

SEL VOL+VOL-

0to32

POP

DISC

11: 08

MOD

Basic Operation

Balance:

R0-10toL0-10.
Adjust sound balance between left
and right speakers by using VOL + / -

-

Fader:

F0 10toR0-10.

.

Adjust sound balance between front and
rear speakers by using VOL + / VOL - .

Setting Audio Modes

Touch the screen the DSP range

DSP

(or press the EQ/LOUD button
on the remote ) to select one of
the preset sound modes .

(Rock/Pop/Jazz/Classic/Flat).

The information will display in the
monitor as follow :

CLASSIC

DISC

TA AF

OSD

JAZZ

11: 08

POP

ROCK

FLAT

DVD 11-0:44:36

LUD

SWF

RDM INT RPT

POP

CLKSWF LUD DSP

to ahead/back (proceed/cancel) , and
then press the SETUP button briefly to
confirm .

FM1 106.30MHz

ST

LUD

DX

SWF

TA

POP

DISC

11: 08

(Please note : press the button longer
again to renew it . )

Reset Factory Settings

RESET button is placed on the housing
and must be activated with either a
ballpoint pen or thin metal object.
The RESET button is to be activated for
the following reasons:

A. Initial installation of the unit when
all wiring is completed.
B. All the function buttons do not operate.
C. Error symbol on the display.

RESET

touch to select

It`s depend on your habit to select the

Audio mode .

Scroll Caption Adjustment

In Radio mode:

You can adjust your desired scroll
caption , the method of the operation
as follow:
A). Press and hold the SETUP button
(for about 2 seconds) on the remote
control, the adjustment scroll bar will
display on the screen .
B). Use the VOL+/- to select among of

the “A, B, C ....X, Y, Z, and blank ”, and

use the / button on the front panel

VOL

NOTE:

If RESET is selected, all memory data
will deleted, please re-adjust .

19

Radio Operation

Listening to the Radio

Switching To Radio Mode

Touch the MOD range repeatedly

MOD

on the screen to select the RADIO
mode. the following information
will appears as below:

DISC

BND

DISC

DSP

DISC

PTY

11: 08

MOD

11: 08

CLK

CH

CH

CH

11: 08

6

6

6

FM1 106.30MHz

ST

LUD

4 5 6

FM1 106.30MHz

ST

LUD

VOLUME- VOLUME+

ST/MON

FM1 106.30 MHz

ST

LUD

SWF

SWF

DX

SWF

SWF

DX

2 31

SEL

DX

LUD

TA AF

TA

POP

TA

POP

LOC APS

TA

POP

FM1 FM2 FM3

AM2(MW2)

AM1(MW1)

()You can also press the BND on front

panel repeatedly to select the band .

Start Searching For a Station

Manual Search

During Radio mode, briefly touch the
screen of “ ” section or swing the
SEL knob in direction “ ” on front panel
to increase frequency by one step of
channel spacing .

Briefly touch the “ ” section or swing
the SEL knob in direction the “ ” button
on front panel to decrease frequency by
one step of channel spacing .

Automatic Search

During Radio mode, touch and hold
(for more than 2’s ) the screen of “ / ”
section or swing and hold the SEL knob
in the direction “ / ” on the front
panel to start search for a radio station
automatically .

Touch “ ” to next .

Touch “ ” to previous .

Selecting The Frequency Band

Touch the section on the

BND

touch screen repeatedly to select
the band , screen band will show
in turn :

BND

When an FM stereo broadcast is
hard to receive

ST/MON

()When Stereo mode is activated, the ST

symbol will appear .

20

Touch the section on

ST/MON

touch screen (or press ST/MO
button on the remote) to select
the MONO or STEREO mode .

Radio Operation

To tune in strong-singnal FM
Station only (LO/DX function)

Touch the LOC section on the

LOC

touch screen (or press LO/DX
button on the remote) to select
the LOCAL or DX mode .

()You can choose between the LOCAL

and DX(DISTANCE) mode for local or

long-distance traffic news .

Storing Stations In Memory

Setting Memory

Press the /CH 1-6 button repeatedly
on the front panel to preset stations at
radio mode . Or touch the screen the
1-6 sections()

DISC

BND

CH

11: 08

MOD

6

FM1 106.30MHz

ST

LUD

4 5 6

SWF

TA

DX

POP

2 31

Touchtopresetstation

With this system, a total of 30 stations
can be stored in the memory of six
buttons. Each band stores up to six
preset stations. The stations might be
FM1, FM2, FM3, AM1(MW1), and
AM2(MW2) band.
The operation is as below :

-Store in Memory
Touch and keep the 1-6 sections
(or press and hold the /CH 1-6) for

about 2 seconds, the current listening
station will be stored into the
number location .

-Retrieve a preset station
Touch the 1-6 sections briefly (or press
the /CH1-6 button repeatedly) to
retrieve a station which had been
stored in the memory in advance the
chose number is shown on display .

Automatic Memory Storing &
Program Scanning

Automatic Preset Setup

In Radio Mode, Touch and keep the

APS

APS section on the touch screen
(or swing and hold the SEL knob in
direction of the APS/DISP) for about

2 seconds to active automatic station
storage. The radio searches within the
current frequency band, e.g. FM1, for
the stronger signal level until the search
cycle has finished . The six strongest
stations are then allocated to the
corresponding storage locations . Then
the station of the first storage location
is set .

Scan Function

In Radio mode, briefly touch the

APS

APS section on the touch screen

the radio briefly plays all the preset
stations of the frequency band .

RDS FUNCTION

In Radio mode, touch it to select
the desired item, it will display the

following as below :

DSP

DISC

PTY

CLK

CH

11: 08

6

FM1 106.30 MHz

ST

LUD

SWF

DX

SWF

TA AF

TA

POP

LUD

TA TrafficAnnonuncement

(priority For Traffic Information)

In Radio mode, touch the TA

TA

section briefly (or swing the SEL
knob briefly in the TA/AF direction) ,

to activate the TA function. Touch it
again to turn off the TA function .When
the TA function is activated, the TA
symbol appears in the display .

21

Radio Operation

During radio operation in one FM
frequency band the search for a traffic
announcement station is started
automatically (TA SEEK) .

If an FM station is being received which
transmits the latest traffic announce­ments from time to time, the TP display
lights up.

When the TA function is switched on ,
the FM traffic automatically interrupt CD
operation(the word TRAFFIC appears
in the display).

The volume level is increased to the

minimum value for the transmission of
traffic announcements.

After the traffic announcements has

finished, the program that was previously
running is resumed.

Interruption of the TA Function:
if you would like to interrupt the current
traffic announcement, touch the TA
section on screen briefly . This does
switch off the TA mode .

AF FUNCTION

(Alternative Frequencies)

In Radio mode, touch the AF

AF

section briefly (or swing and hold
the SEL knob in the TA/AF

direction) , to activate the AF
function. Touch it again to turn off the
AF function .

AF is a function that works with the help
of RDS (Radio Data System) and can
only be used with FM stations . The radio
searches in the background for the best
frequency reception of the station that
has been tuned into .

Touch the AF section on touch screen or
swing and keep the SEL knob in the
TA/AF direction for about 2 seconds ,
the AF function is activated. The AF
symbol appears in the display .

When the AF function has been switched
on, the radio continuously tests the
signal strength of the AF frequency .
The test interval for each AF frequency
depends on the signal strength of the
current station and varies from a few

minutes in the case of weak signals.

Whenever the new AF frequency is
stronger than the station that is currently
tuned in , the radio switched to this
frequency for a short time for a short
time and the message
“NEW FREQUENCY “ is displayed for
one or two seconds.

Note :

the status of the AF function is shown by
an AF symbol in the display.

If the AF symbol appears in the display,
the AF function is switched on and RDS
transmission date is being received .
If the AF symbol flashes in the display,
the AF function is selected but no RDS
signal can be received at the moment .

PTY FUNCTION

In Radio mode, touch the PTY

PTY

section briefly (or press and hold
the MU/PTY button on the front
panel) , to select the Program
type .

PTY Selection of the program type

besides the stations name, some FM
stations also transmit information on the
type of program. This information can
be displayed by your car radio .

Examples of such types of program
are :

SPORT NEWS POP WEATHER ......

With PTY function you can specifically
select stations transmitting a particular
type of program. Touch the PTY range
on screen repeatedly to call up the PTY
selection menu . The message
“PTY SEEK” then appears briefly in the
display .

When PTY has been selected the radio
starts searching for corresponding PTY
information and stops when the PTY
information has been found, “NO PTY”
appears in the display. If the PTY
information being searched for no longer
exists, the PTY function automatically
switches to normal mode .

22

DISC Operation

Basic Operation

During DISC playback, you can touch
the screen to display the following:

DVD 11-0:44:36

LUD

SWF

SEL VOL+VOL-

POP

DISC

11: 08

MOD

DVD 11-0:44:36

LUD

SUBTITLE AUDIO

GOTO

Touch it to select the other item .

SWF

POP

TITLE

SET

DISC

11: 08

1 32 4 5 6

MOD

SEL VOL+VOL-

8 7912 1011

1. Previous

2. Next

3. Pause

4. Stop

5. Mute

6. Mode

7. To next page

8. Insert or Eject the disc.

9. Volume+(adjustment+)

10. Select

11. Volume-(adjustment-)

12. Change Angle of unit.

Touch it to select the other item, it

will display the following as below:

DVD 11-0:44:36

LUD

RDM INT RPT

SWF

POP

CLKSWF LUD DSP

DISC

TA AF

OSD

11: 08

DVD 11-0:44:36

ENT

Above these operation buttons for
DVD setup.

Touch itfor previous .

DVD 11-0:44:36

LUD

SWF

SEL VOL+VOL-

POP

DISC

11: 08

MOD

Touch it to select the other item .

23

DISC Operation

Switching the DVD mode

Touch the MOD section on the

MOD

touch screen (or press MOD
button ) to select the DISC mode,
it display like following :

DVD 11-0:44:36

LUD

Function setup
(different the sourcethedisplayisdifferent)

Stopping Play

Touch the screen the range (or
press the button on remote
control .) To stop the unit playback.
Touch the section or press
button on front panel to start play.

Pause (still picture)

Touch the “ ” section on touch
screen during playback will stop
play temporary, touch it again to
return the normal playback .

Rapid Forward/Rapid Reverse

During DISC playback, Touch and

hold (for about 2 seconds )the

/ section on the touch screen

(or swing and hold (for more than

2’s) the SEL knob in the direction

“ / ” on the front panel , the

speed of rapid forward/reverse

changes according to the disc as

follow:

DVD/VCD/CD/MP3:

Normal Playback2x 4x 8x 16x

SWF

SEL VOL+VOL-

POP

DISC

11: 08

MOD

Skipping Track

During DISC playback, Touch the
screen of “ / ” range to skip
to next/back one track.
(You can also swing briefly the SEL
knob in direction “ / ” buttons
on the front pane to skip to next /
back one track.)

Note :

1. In DVD mode, touch the section
continually twice to back one track .
(Move the SEL knob in the direction of
the button on the front panel continu­ally twice to back one track .)

2. For some VCD2.0 disc (PBC-playback
control), above these buttons may be
unavailable .

Zoom Function

Repeatedly touch ZOOM section ,

ZOOM

the displaying rate can be 2x, 3x,
4x, 1/2, 1/3, 1/4 .

Press the direction keys / / /
buttons on the remote control or touch
the screen of “ / / / ” section to
move through the enlarged picture .
Note: During JPEG playback , touch the
screen of ZOOM section , the word
“zoom 100%” will display, then you can
touch and hold (more than 2’s) the /
section on touch screen (press briefly
the / buttons on remote control) to
increase /decrease in size .During the
ZOOM mode, use the direction buttons
to move the picture up, down, left, right
of the direction .

Loud Function

Touch the LUD section on the

LUD

touch screen to switch the LOUD­NESS function ON and OFF .

Subwoofer Function

touch the SWF section on the

SWF

screen to switch the Subwoofer
function ON and OFF .

24

DISC Operation

Selecting The Play Modes

During the Disc playback, touch the
touch screen, it will display the following
as below :

DVD 11-0:44:36

LUD

Touch the section to select .

DVD 11-0:44:36

LUD

RDM INT RPT

1). Repeat Function

FOR DVD :

Touch the screen the RPT section

RPT

(or press longer RPT on remote
control) to select REPEAT mode
as follow :

CHAPTER REPEAT ON TITLE REPEATON

FOR VCD/CD/MP3 :

Touch the screen the RPT section

RPT

(or press longer RPT on remote
control) to select REPEAT mode
as follow :

REPEAT ONE REPEATALL

1. Continuously repeat at the current

chapter/track, when selected REP­ONE mode .

2. Select REP-ALL mode to continuously

repeat all chapter/track on the
current disc .

SWF

SEL VOL+VOL-

SWF

POP

DISC

POP

DISC

TA AF

CLKSWF LUD DSP

OSD

REPEATALL

REPEAT OFF

11: 08

MOD

11: 08

2). RDM(RANDOM) Function

Touch the RDM section ( or press

RDM

4/RDM button longer on remote
control to play in random.

Each playing, the order is different .
(depend on the disc used for VCD).
Touch it again to cancel this function .
( the “ ” button is not available .)Note:

3). INT Function

FOR CD :

Touch the screen the INT section

INT

(or long press the 3/INT button on
the remote) to play the previous 6
seconds part of each track/chapter
on disc.(touch it again to cancel)

FOR VCD :

Touch the screen the INT section

INT

(or long press the 3/INT button on
the remote ).it display will
following menu as below :

(touch it again to cancel this mode .)

SELECT DIGEST TYPE:
TRACK DIGEST
DISC INTERVAL
TRACK INTERVAL

Use the UP, DOWN, LEFT and RIGHT
arrows on the remote to select the item,
and then press ENTER to confirm .

FOR DVD :

Touch the screen the INT section

INT

(or long press the 3/INT button on
the remote ). it display will
following menu as below :

(touch it again to cancel this mode .)

SELECT DIGEST TYPE:
TITLE DIGEST
CHAPTER DIGEST
TITLE INTERVAL
CHAPTER INTERVAL

Use the UP, DOWN, LEFT and RIGHT
arrows on the remote to select the item,
and then press ENTER to confirm .

Note : The button is not available
for .

MP3

25

3/INT

DISC Operation

DISC Search (GOTO)

DVD 11-0:44:36

LUD

SUBTITLE AUDIO

GOTO

Touch the section , it display will

GOTO

following as below :

Title 01 /01 , Chapter --/15

0

6

FOR DVD :

Touch the screen the range

GOTO

(or press on the remote ).
Twice, the screen will display the
following message :

SWF

7/

POP

TITLE

GOTO

321

8

GOTO

DISC

11: 08

SET

5

4

9/

+10

GOTO

Note:

Touch and hold the “ ” or “ ” range

7/

9/

on the touch screen , you can select the
title or chapter of DVD . (Only for the
DVD with title /chapter.)

AUX Operation

To connect analogue replay devices.
Use this jack to replay sound of other
replay equipment such as DVD players,
computers, etc. Via the loudspeakers.

AUX IN JACK IN PANEL

Ground

Video

Right

Left

Title 01/01 Time -:--:--

0:10:36

You can select the item you want to
watch through TIME setting by using
numberic buttons . (E.x. 0:10:36)

FOR VCD (With PBC OFF):

Touch the screen the GOTO range

GOTO

(or press GOTO on the remote ).
Once, the screen will display the
following message :

Disc Go To --:--

00:36

Use the numberic buttons to input the
time directly (E.x. : 00:36)

1). Please connect the external device
with stereo jack plug the Aux in socket .

2). Touch the MOD section on screen
or press the MOD button to select the
AUX IN connection.

3). You now hear the sound from the
external device played back through
the loudspeakers .

4). Touch the volume+/- sections on
touch screen or use the VOL+/- on
the remote to adjust the volume level.

26

DISC Operation

ON-SCREEN DISPLAY FUNCTION

During playback, touch the screen

OSD

the OSD section (or press the OSD

on the remote), it will display the

following as below :

1. DVD:
A.Touch or Press for first time:OSD

TITLE ELAPSED

T 01/01 C 01/38 0:02:06

Title Number, Total Title Number,
Chapter Number, Total Chapter Number
of this Title of the disc currently being
played will be shown on the screen,
along with the elapsed time.

B.Touch or Press for second time:OSD

TITLE REMAIN

T 01/01 C 01/38 3:24:36

2.Example for VCD/SVCD/CD:
A.Touch or Press for first time:OSD

SINGLE ELAPSED

TRACK 01/16 0:00:56

B.Touch or Press for second time:OSD

SINGLE REMAIN

TRACK 01/16 0:05:10

C.Touch or Press for hird time:OSD

TOTAL ELAPSED

TRACK 01/16 0:31:36

D.Touch or Press for fourth time:OSD

TOTAL REMAIN

TRACK 01/16 0:36:26

C.Touch or Press for hird time:OSD

CHAPTER ELAPSED

T 01/01 C 01/38 0:02:56

D.Touch or Press for fourth time:OSD

CHAPTER REMAIN

T 01/01 C 01/38 0:04:32

E. Touch or Press for fifth time:

OSD

The message on the screen will be
cleared.

E.Touch or Press for the fifth time:

OSD

The message on the screen will be
cleared for SVCD and VCD.

NOTE:

For CD and MP3,the message will
always display on the screen.

3.Example for MP3:
Each time is pressed or touch , the

OSD

message displayed on screen changes
as follows:

SINGLE ELAPSED SINGLE REMAIN

27

DISC Special Functions

DVD/VCD Special Function

DVD 11-0:44:36

LUD

SUBTITLE AUDIO

GOTO

1. Multi-subtitle Language
Function (for DVD Only)

SUBTITLE

on the remote) . Each time the button is
pressed or touch, number of the subtitle
language changes in sequential order.

Notes:

- The language number is different
according to the disc.

- Some discs only contain one subtitle
language.

- When no different subtitle language
are recorded, will be displayed
at screen left top corner.

During DVD playback. Touch
the section on touch
screen(or press the SUBTITLE

2. Multi-Audio Language Function

AUDIO

on the remote .) Each time the button is
pressed or touch , number of the audio
soundtrack language changes on
sequential order.

Notes:

- The language number is different

- Some disc only contain one language

- When no different language

For DVD:

During DVD playback , touch
the section on touch
screen (or press the AUDIO

according to the disc.

soundtrack

soundtrack are recorded will be
display at screen left top corner.

POP

SWF

TITLE

SUBTITLE

AUDIO

SET

DISC

11: 08

For VCD/CD:

during playback, touch the

AUDIO

section of the touch screen or Press

AUDIO

on the remote . It is possible to
switch the sound between monaural
and stereo sound.

MONO LEFT MONO RIGHT

STEREO

MIX-MONO

3. Multi-Angle Function
(for DVD Only)

During DVD playback, touch the

section or Press ANGLE button
on the remote . Each time the
button is pressed or touch,number

of the angle changes in sequential
order.

Notes:

- The angle number is different
according to the disc.

- The function only work for disc having
scenes recorded at different angles.

- When no different angle are recorded,

will be displayed at screen left top

corner.

4. Title Menu Function

For DVD:

TITLE

If the DVD has multiple titles
recorded on the disc. It can select
preferred title from the title menu
to start playback.

- During DVD playback, touch the
section or press TITLE button on the
remote .The title menu is display.

- Touch the cursor button shown in TV
screen, select preferred title by the
cursor button and confirmed by touch
ENT button .

ENT

Touch to select

For VCD:

TITLE/PBCPress button on the remote

control while the disc is playing, you can
switch between "PBC on"and "PBC off"
mode.

28

TITLE

Setup

USING THE MENU

DOLBY

....GENERAL SETUP PAGE....

TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Last Memory

Go To General Setup Page

1. Touch the section of DVD setup

SET

on touch screen (or press the SETUP
on the remote .)

2.The SETUP menu is displayed.

3.Select the preferred item by touch the
/ / / range on the screen

or by using the / / / buttons .

4.Touch the ENT section on screen or

Press ENTER button on remote to
confirm .

The Following Buttons For Entering

The Selection .

LB
ON
ENG
SPDIF/RAW
ON
ON
ON

GENERAL SETUP

TV Setting

DOLBY

....GENERAL SETUP PAGE....

TV Display

TV Display
Angle Mark

OSD Lang
Spdif Output
Captions
Screen Saver
Last Memory

Set TV Display Mode

16:9

4:3 Pan Scan

Normal/LB

4:3LetterBox

Normal/PS
Normal/LB
Wide

ENT

Previous

EnterUpDown Left

Touchto select

Right

The buttons of the left and right are for
selection of setting type .
The buttons of the up and down are for
selection of the setting program .

Overview Of The Main Menu

DOLBY

()1 ()2 ()3 ()4

(1).GeneralSettings
(2).SpeakerSettings
(3).DOLBY Digital Settings
(4).Preference Settings

1.TV DISPLAY SETUP

This is to select the appropriate TV
aspect (4:3 or 16:9) according to the
connected TV set.

Normal/PS (For 4:3 TV)

Played back in the PAN & SCAN style.
(If connected to wide-screen TV, the
left and right edges are cut off.)

Normal/LB (For 4:3 TV)

Played back in LETTER BOX style.
(If connected to wide-screen TV, black
bands appear at top and bottom of the
screen.)

Wide (For 16:9 TV)

Select when a wide-screen TV set is
connected.

29

Setup

GENERAL SETUP

DOLBY

DOLBY

....GENERAL SETUP PAGE....

TV Display

Angle Mark

Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Last Memory

Set Angle Mark

ON

ON
OFF

2. ANGLE MARK DISPLAY SETUP

If it is set to ON, when the multi-angle
DVD disc is playing, (the angle
mark) will appears on the screen; if is

....GENERAL SETUP PAGE....

TV Display
Angle Mark

OSD Lang

OSD Lang
Spdif Output

Spdif Output
Captions
Screen Saver
Last Memory

Setup SPDIF

4. SPDIF OUTPUT

This is to activate the audio output
from SPDIF OFF mode to SPDIF/RAW
mode to SPDIF/PCM mode.

set to OFF, the mark will not appear.

LANGUAGE DISPLAYING SUBTITLES HIDING

DOLBY

....GENERAL SETUP PAGE....

TV Display

English

Angle Mark
OSD Lang

OSD Lang

OSD Lang
Spdif Output
Captions
Screen Saver
Last Memory

English
French
German
Spanish
Italian
Portuguese

....GENERAL SETUP PAGE....

TV Display
Angle Mark
OSD Lang
Spdif Output

Captions

Captions
Screen Saver
Last Memory

SPDIF OFF

SPDIF/OFF
SPDIF/RAW
SPDIF/PCM

DOLBY

ON

ON
OFF

Set OSD language

3. OSD LANG TYPE SETUP

Touch the / section on the touch

screen or press the / button on
the remote to select the preferred
OSD language , then touch the ENT
section to confirm .

Closed Caption

5. CAPTIONS SETUP

Activate the CAPTIONS feature by

selecting ON. And release this feat­ure by selecting OFF.

30

Setup

GENERAL SETUP

DOLBY

....GENERAL SETUP PAGE....

TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver

Screen Saver
Last Memory

Screen Saver

6. SCR SAVER SETUP

Select the SCR SAVER output
ON/OFF.

DOLBY

ON

ON
OFF

SPEAKER SETUP

.....Speaker Setup Page.....

DOLBY

....Speaker Setup Page....

DOWNMIX

DOWNMIX

Set Downmix Mode

LT/RT
STEREO

STEREO

This is to activate the audio output from
DOLBY AC3 5.1 DOWNMIX to 2 channel
mode. Select the preferred SPEAKER
connection by using the cursor buttons.
Select the LT/RT to activate the Dolby
surround compatible output.
Select the STEREO to activate simple
stereo mode.

DOLBY DIGITAL SETUP

DOLBY

....GENERAL SETUP PAGE....

TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Last Memory

Last Memory

Set Last Memory State

ON

ON
OFF

7. LAST MEMORY SETUP

Select the LAST MEMORY output
ON/OFF.

....DOLBY Digital Setup....

DOWNMIXDYNAMIC

Set DRC OFF

DYNAMIC RANGE CONTROL

Select DRC and adjust the dynamic
range of a Doby Digital encoded
program. There are 8 steps between
full compression and off compression.

31

FULL

6/8

4/8

2/8

OFF

Setup

--- PREFERENCES PAGE ---

DOLBY

....Preference Page....

TV Type

TV Type
Audio

OSD Lang

Subtitle
Disc Menu
Parental
Password
Default

Set TV Standard

PAL
AUTO

NTSC

NTSC

1. TV TYPE SETUP

This player can play discs recorded
in either PAL or NTSC format. Select
NTSC format, when you connected to
NTSC TV. Select PAL format, when
you connected to PAL TV. Select AUTO
format, the player TV output format
will according to the DVD disc format .

DOLBY

....Preference Page....

TV Type
Audio

Audio

OSD Lang

Subtitle
Disc Menu
Parental
Password
Default

Preferred Audio Language

English

English
French
German
Spanish
Italian
Portuguese

DOLBY

....Preference Page....

TV Type
Audio

OSD Lang

Subtitle

Subtitle
Disc Menu
Parental
Password
Default

Preferred Subtitle Language

English
French
German
Spanish
Italian
Portuguese
Off

Off

3. SUBTITLE LANGUAGE SETUP

Select the preferred SUBTITLE
language by using the cursor buttons.

DOLBY

....Preference Page....

TV Type

English

Audio

OSD Lang

Subtitle
Disc Menu

Disc Menu
Parental
Password
Default

Preferred Menu Language

English
French
German
Spanish
Italian
Portuguese

2. AUDIO LANGUAGE SETUP

Select the preferred AUDIO sound­track by using the cursor buttons.

4. DISC MENU LANGUAGE SETUP

Select the preferred DISC MENU
language by using the cursor
buttons.

32

Setup

--- PREFERENCES PAGE ---

Age control

DOLBY

DOLBY

....Preference Page....

TV Type
Audio

OSD Lang

Subtitle
Disc Menu
Parental

Parental
Password
Default

4PG13
5PGR
6R
7NC 17
8ADULT

8ADULT
OFF

Set Parental Control

5. PARENTAL

Select suitable parental guidance by
the cursor buttons and conformed by
pressing ENTER button.

DOLBY

....Preference Page....

TV Type
Audio

OSD Lang

Subtitle
Disc Menu
Parental

Password

Password
Default

Changed Password

CHANGE

CHANGE

6. PASSWORD

Select the change and press ENTER
button. Type the old password (The
initial factory code is ) and key
in 4 characters password now you
want to use, and retype again to
confirm key in correctly.

1379

....Preference Page....

TV Type
Audio

OSD Lang

Subtitle
Disc Menu
Parental
Password

RESET

Default

Default

RESET

Load Factory Setting

7. DEFAULTS

Select reset to become factory initial
setting.

DEFAULTS TABLE

GENERAL SETUP

SPEAKER SETUP

DOLBY DIGITAL

PREFERENCES

TV DISPLAY

ANGLE MARK

OSD LANGUAGE

SPDIF OUPUT

CAPTIONS

SCR SAVER

LAST MEMORY

DOWNMIX

DYNAMIC

TV TYPE

AUDIO

SUBTITLE

DISC MENU

PARENTAL

PASSWORD

NORMAL/LB

ON

ENGLISH

SPDIF/RAM

ON

ON

ON

STEREO

OFF

AUTO

ENGLISH

OFF

ENGLISH

8 ADULT

1379

33

Other Main Operation

USB Operation

Following the diagram below, connect
your USB device to the front panel
USB port . If it is properly connected,
the device will be mounted and start
playing automatically.

you can also select the desired item of
the USB device The buttons on the
remote control, on the device, have the
same functions as the touch buttons
of this touch screen have .

In USB Playback mode

Use the UP, DOWN, RIGHT or LEFT
buttons to navigate to and select files
to play, and press ENTER to begin
playback (or viewing, in the case of
JPEG files). To skip to the next or
last track, touch or press the or .
Press the or buttons for Fast
Forward or Fast Reverse playback.

REPEAT

by repeatedly pushing until
the desired mode is found.

.

play modes are also available

REPEAT

Changing From DISC to USB Playback
Modes

If the disc present in the player is an
MP3 disc, touch section on screen
or press the STOP on remote once then
touchorpresstheGOTOtoUSB
playback.

If the disc present in the player is an
DVD or VCD or CD disc, touch on
the screen or press STOP twice on the
remote then touch GOTO section on
the screen or press the GOTO button
on the remote to USB playback.

Changing From USB to DISC Playback

Modes

If you are in USB Playback mode and
wish to begin playback of a disc already
in the player, touch the range on the
touch screen or press the STOP on the
remote once. Then touch GOTO range
on the screen or press the GOTO on the
remote and the player will switch to
DVD/VCD/CD/MP3 Playback mode.

Important Note:

To prevent damage to the USB device,
do not remove or disconnect it during
playback. it is also a good practice to
remove the USB drive during disc
playback.

34

Other Main Operation

MP3/WMA/JPEG/MPEG4 DISC PLAY

When you insert a disc which contains MP3, WMAor JPEG files, the different file
types are detected, and a list of the files are produced, as shown in the diagram
below.

56

4

3

003/112

2

Mp3

Mp3

1

Mp3

..............

00:56 04:07

K

P

woman

new

Repeat one

1

ton

Touch the screen, it will display the following as below :

when the parking brake is applied .()

1

. Current track(file)(highlighted bar)
. Current track (file) number/total

2

number of tracks(files) in the current
folder.

. Elapsed playing time of the current

3

track(

not available for JPEG disc)

. total playing time.

4

( not available for

JPEG disc)

. Operation mode icon. (Play),

5

(stop), (pause), (forward)

(reverse).

. Selected playback mode

6

MP3 10-0:44:36

LUD

SWF

SEL VOL+VOL-

POP

DISC

11: 08

MOD

Touchrepeatedly

MP3 01-0:44:36

ENT

Touch the / / / sections on touch screen (or Use / / / on remote

control ) to select the item or folder, then touch the ENT section (or press ENTER
button on remote) to confirm.

Touch the RPT on the touch screen (or Pressing REPEAT button on the remote)
repeatedly can select two kinds of repeat play mode.
REP-ONE:
Play the same song over and over again.
REP ALL:
Play all songs in the discover and over again.

Moving To Another Track :

1. Touch the or section to skip a track ahead or back.

2. Swing the SEL knob in the direction or button to skip a track ahead or back.

Fast Forward/Fast Backward

1. Touch longer (more than 2’s ) the “ / ” range for fast forward or fast backward .

2. Swing and hold (more than 2’s) the SEL knob in the direction or button for

forward or backward .

35

Specification

Supply Voltage: 12V DC (11V-15V)
Current Consumption: Less than10A
Signal System: Compositive video 1.0Vp-p 75
Power Output: 80W x 4
Discs Played: (1)DVD-VIDEO Disc

5"(12 cm) single-sided, single-layer
5"(12 cm) single-sided, double-layer
(2)Compact Disc (CD-DA, VIDEO CD)
5"(12cm) disc

Audio Signal Output:
Characteristics: (1)Frequency Response 20 Hz - 20 KHz

5-Channel RCA Output (Front & Rear + 1-Subwoofer)

(2)S/N Ratio 90 dB (JIS)
(3)Wow and Flutter Below measurable limits

RADIO Section:

For 3 Bands For 2 Bands For 2 Bands
(Europe) (Europe) (U.S.A.)

FM FM FM
Frequency Coverage: 87.5 to108 MHz 87.5 to108 MHz 87.5 to107.9 MHz
IF: 10.7 MHz 10.7 MHz 10.7 MHz
Sensitivity (S/N = 30 dB): 15 dBu 15 dBu 15dBu

MW MW AM
Frequency Coverage: 522 to1620 KHz 522 to1620 KHz 530 to1710 KHz
IF: 450 KHz 450 KHz 450 KHz
Sensitivity (S/N = 20 dB): 40 dBu 40 dBu 40 dBu

TFT Monitor:

Monitor Screen Size: 4.3 Inch Wide
Number of Pixels: 1152 X 234 pixels
Color System: NTSC/PAL

NOTE: Specifications and design are subject to modification, without notice,
due to improvements in technology.

36

Trouble Shooting

Before going through the check list, check wiring connection. If any of the problems
persist after check list has been made, consult your nearest service dealer.

SYMPTOM CAUSE SOLUTION

If the power supply is properly
connected to the car accessory
terminal,switch the ignition key

"ACC"

to

Replace the fuse

Remove the disc in the player,
then put a new one

Insert the compact disc with
the label facing upward

Clean the disc or try to play a
new one

Cool off or until the ambient
temperature return to normal

Please switch to correct color
system from menu

Make proper connection
according to wire connection

For safety reasons no television
/video images are displayed while
the vehicle is moving.
Engaging the parking brake will
cause images to be displayed.

Please the television mode of
the choice accommodation

Change the disc

Change the disc
Record JPEG files using a
compliant application

Press the RESET button.
Front panel is not properly fixed
into its place

Insert the antenna cable firmly

Select a station manually

“”

No power

Disc can not be
loaded or ejected

Television/video
imageappears
black-white

No television/video
image appears

No color in picture

JPEG disc can
not be played
back

The operation keys
do not work

The radio does not
work

The car ignition switch is
not on

The fuse is blown

Presence of disc inside the
player.

Inserting the disc in reverse
direction

The disc is extremely dirty
or defective

Temperature inside the car
is too high

The color system is
set incorrectly

The unit is not connected
to the parking brake
detection switch

The parking brake is not
engaged

Thediscformatisnot
accordingto the TV-set
used (PAL/NTSC)

No JPEG files are recorded
on the disc.

JPEG files are not recorded
in a compliant formant

The built-in microcomputer
is not operating properly
due to noise

The antenna cable is not
connected

The signals are too weak

37

888-J4303-50S