Boss Audio BV7450T User Manual

To ensure safety while driving
and to comply with laws,
drivers should not watch video or
operate the video device while driving.
PRECAUTION
This car multi-media player is a class 1 laser product. However This car multi-media player uses a visible/invisible laser beam which could cause . Hazardous radiation exposure if directed.
Be sure to operate the car multi-media player correctly as instructed. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Do not open covers and do not repair yourself. Refer servicing to qualified personnel.
-1-
Content
Precaution.........................................................................................
Content.............................................................................................
Installation steps...............................................................................
General knowledge about remote control...........................................
Locations and Names of controls on main unit...................................
Locations and Names of controls on remote control..........................
Same functions in any work source mode..........................................
Radio operation................................................................................
TV operation.....................................................................................
Disc/USB/card operation...................................................................
1. Loading or unloading a disc, USB or card.....................................
1.1 Loading a
1.2 Unloading a disc, USB or card....................................................
2. Popping up Function Icons-board................................................
2.1 Function Icons-board of Digital Video/VCD/MPEG4/Image
/MP3/WMA.................................................................................
2.2 CD interface..............................................................................
3. Function of controls on the touch screen/main unit/remote
control........................................................................................
* Region Code...........................................................
* Parental Control..........................................................................
disc, USB or card.......................................................
....................
1
2
3
7
8
9
10
13
15
16
16
16
17
17
17
18
19
28
29
AUX IN operation..............................................................................
Rear View Camera.............................................................................
Troubleshooting...............................................................................
Specification....................................................................................
-2-
30
31
32
33
INSTALLATION STEPS
1. Remove the 2 deck screws as right;
2. Mounting Slide Bracket Housing;
1) Remove the PLASTIC FRAME from the chassis ;
2) Insert the 2 KEY PLATES into the grooves at the both sides of the chassis till they click; then pulling the two KEY PLATES to Slide Bracket Housing ;
KEY PLATE
If you want to take CHASSIS out of the SLIDE BRACKET HOUSING , first remove the PLASTIC FRAME of the both sides away, then insert the two KEY PLATES into left and right sides of chassis as above illustration.
remove the chassis from the
KEY PLATE
PLASTIC FRAME
3) Mount the Sliding Bracket Housing in the position of car multi-media system and bend some tabs of Sliding Bracket Housing to fix it.(see Installation Diagram)
3. Connecting all wires:
1) Remove control panel from chassis
as follows:
A. Press the REL button to flip down control panel .
REL button
-3-
B. Hold the left end of the control panel to slide rightwards a little and pull it towards you to remove it .
2
1
2) Connecting all wires according ot the wiring diagram as follows:
RADIO ANTENNA JACK
TV ANTENNA JACK
AUDIO L OUT (white)
AUDIO R OUT (red)
VIDEO IN (YELLOW)
VIDEO OUTPUT (brown)
SUB WOOFER
(B+) 12V REAR CAMERA SWITCH
(B-) PA RK IN G BRAKE
REAR CAMERA INPUT
GREY
PINK
BROWN
YELLOW
BLUE
YELLOW
BLACK
RED
FUSE
AUTO ANTENNA
CONSTANT 12 VOLTS
GROUND(B-)
IGNI TION SW ITCH
FRONT
Lch SPK.
REAR
Lch SPK.
WHITE
WHITE/BLACK
GREEN
GREEN/BLACK
GREY
GREY/BLACK
VIOLET
VIOLET/BLACK
FRONT
Rch SPK.
REAR
Rch SPK.
NOTE:
1. Must use 4 ohms impedance of speakers.
2. After connecting parking Line, video on screen of control panel will be displayed only after
applying parking brake.
3. Before finishing wiring, do not attach control panel onto chassis.
-4-
3) Attach control panel onto chassis.
A. Make the right hollow of control panel aim at the right bulge of chassis, then push and hold control panel rightwards; at one time, move the left end of control panel towards chassis to make the left hollow
of control panel aim at the left bulge of
chassis and then release holding .
Bulge
Hollow
Bulge
Hollow
B. Flip control panel up till hearing a click sound to attach onto chassis.
Connector
How to clean panel connector
* Frequent detachment will deteriorate panel connectors. To minimize deterioration, periodically wipe the panel connectors with a clean/soft/dry cloth .
4) Testing it for making sure that it can work properly .
4. Installing main unit according to installation diagram:
1) Insert the chassis of the car multi-media system
into the sliding metal housing.
2) Use the metal strap to fix the rear part of chassis.
* Uninstalling main unit:
1) Remove metal strap from main unit;
2) Remove plastic trim frame from main unit;
3) Insert a key plate into left and right side of main unit and draw sliding metal housing.
-5-
main unit out of
Installation diagram
DASH BOARD
HEX NUT
SPRING WASHER
PLAIN WASHER
TAPPING SCREW
METAL MOUNTING STRAP
SLIDE BRACKET HOUSING
CONSOLE
FIXING TA B
HEX BOLT
-6-
GENERAL KNOWLEDGE ABOUT REMOTE CONTROL
1. Removing insulating sheet
using remote control for the first time, you
If can see an insulating sheet at the bottom side of remote control as right.
you must remove the insulating sheet as right. Otherwise, the remote control is disabled.
2. Replace lithium cell
If the electric energy of lithium cell is weak, replace it.
1 Press and hold the movable block as direction
)
indicated by arrow 1 as right, at one time pull
cell holder out of remote control as direction
indicated by arrow 2 as right.
2 Replace the old cell by a new one with (+)
)
polarity side upward as right.
3 Insert the cell holder into remote control again
)
as right.
3 Note about
.
1 You should face the emitting window of remote control towards the sensor
)
window of the unit.
2 Operation angle for front panel: About 30 degree
)
3 The distance between the emitting window of remote control and the sensor
)
window of the unit : <
4 Warning for lithium cells of remote control
.
leakage may cause damage to remote control.1 Cell
)
2Do not throw cells into fire, it may cause explosion.
)
.
3.To avoid risk of accident, keep cells out of reach of children.
using remote control
5M .
-7-
Locations and Names of Controls on Main Unit
1
2
4
3
18
5
9
1011 1213
19
Control Panel
6
7
8
14 15 16 17
Front Facet of Chassis after removing Control Panel
1. POWER BUTTON
2. >| BUTTON
3. SRC BUTTON
4. MUTE BUTTON
5. IR SENSOR WINDOW
6. REL BUTTON
7. USB PORT AND COVER
8. AUX IN JACK
9. EQ BUTTON
10. BAND BUTTON
11. |< BUTTON
12. SEL BUTTON AND VOL KNOB
>|| OR CH1~6 BUTTON
13.
14. DISC SLOT
15. CARD SLOT
16. EJECT BUTTON
17. RESET BUTTON
18. LOUD BUTTON
19. APS BUTTON
-8-
Locations and Names of Controls on Remote Control
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
16. VOL- BUTTON
17. SEL BUTTON
18. SETUP BUTTON
19. GOTO BUTTON
20. >|| BUTTON
21. STOP BUTTON
22. AUDIO or MO/ST BUTTON
23. ANGLE BUTTON
24. EQ BUTTON
25. CLK BUTTON
21
23
25
27
29
31
32
33
20
22
24
26
28
30
34
1. POWER BUTTON
2. MUTE BUTTON
3. REPEAT BUTTON
4. ZOOM BUTTON
5. SRC BUTTON
6. MENU or SW BUTTON
7. >> or SEARCH BUTTON
8. SUBTITLE or LO/DX BUTTON
9. < or FINE+ BUTTON
10. BUTTON
BAND or OSD
11.
<< or SKIP BUTTON
12. A/PS or TITLE/PBC BUTTON
13. TO P BUTTON
VOL+ BUTTON
14.
15. RDM BUTTON
26. ^ or CH+
27. >>| BUTTON
28. ENTER BUTTON
29. > or FINE- BUTTON
30. V or CH- BUTTON
31. |<< BUTTON
32. INT BUTTON
33. NUMBER(0~9) BUTTON
34. +10 BUTTON
BUTTON
-9-
Loading...
+ 24 hidden pages