Boss Audio 815CA User Manual

10 R - 03 0500

1. BUTTONS LOCATION AND FUNCTIONS

1. Panel ReleaseButton

2. Mute Button

3. CD EjectButton

4. Power Button

5. Display Button/ ID3 InformationButton

6. Local /Distant Button

7. Preset MemoryButtons

8. Menu Button

9. Scan Button

10. Volume Knob

11. MP3Menu Button &Automatically Store/ Preset ScanButton

12. Band/LoudnessButton / MP3Enter Button

13. TuningUp/Down &Track Up / DownButtons

14. RemoteControl Receiver

15. SourceButton

16. AuxIn Jack

1. Entriegel-Taste Bedienteil

2. Stumm-Taste

3. CD-Auswurftaste

4. Einschalt-Taste

5. Display-/ID3-Taste

6. Local/ Distant-Taste

7. Senderspeichertasten

8. SuchlaufTaste

9. Scan-Taste

10. Lautstärkenregler

11. AMSTaste

12. Frequenzband-Taste /MP3 Eingabe-Taste

13. TitelAUF / AB- Taste

14. Fernbedienungs-Taste

15. Source

16. Front-Audio-Anschluss

1.Teclapara removero painelfrontal

2.TeclaMute

3.Teclapara ejetaro disco

4.TeclaLigar/desligar

5.TeclaDisplay /informação MP3-iD3

6.TeclaLocal/Distante

7.Teclasde memóriade estações

8.TeclaMenu

9.TeclaScan

10.Controle devolume

11.Memorização automática(As) /PresetScan (Ps)

12.TeclaBanda /Loudness /MP3Enter

13.Teclasde sintonizaçãode estações/mudança defaixas

demúsica

14.Sensor docontrole remoto

15.TeclaSource

16.Entrada Auxiliar

1. Extraccióndel panel frontal

2. Silenciamientorápido

3. Aperturadel panel motorizadoy expulsióndel disco

4. Encendido/Apagado

5. Seleccióninformación Display/ID3 TAGmuestra

6. BotónDistancia/Local

7. Botonesde estaciones memorizadas

8. Menúdel Sistema

9. BotónDe Búsqueda

10. BotónDe Volumen

11. MemorizaciónAutomática de emisoras / selecciónde memorias

12. SelectorBandas / Bajos/MP3

13. Botónde selección deemisoras &banda de música

14. Receptorde control remoto

15. Selecciónmodos Radio/CD/Entrada auxiliar&Botón De Sub-W

16. Entradade auxiliar

1. BoutonDe DéclenchementDu Panneau

2. BoutonD'assourdissement

3. BoutonÉjection D'unCd

4. BoutonD'alimentation

5. BoutonD'écran /Affichage D'informationSur LesDisques MP3

6. BoutonLocal/distant

7. BoutonsDes StationsPréréglées (m1~m6)

8. BoutonDe Menu

9. BoutonDu Scanner

10.BoutonDeVolume

11.BoutonDeStockageDesStationsDansLaMémoire

12.BoutonDeBande /Entrée DeMP3

13.BoutonDeRechercheDesStations/pistes:EnAvant/EnArrière

14.RécepteurDeLaCommandeÀDistance

15.BoutonDeRégime/Subwoofer

16.AuxAJack

1. TastoRilascio Frontalino

2. TastoMute

3. TastoEject

4. TastoPower

5. TastoDisplay/ID3 (informazioni)

6. BottoneDistante Locale

7. TastiStazioni MemoriePreimpostate

8. TastoMenu

9. TastoScan

10. TastoVolume

11. TastoAS/PS

12. TastoBanda/Forte & EnterMP3

13. Tastosintonizzazione su/gui& traccia su/gui

14. Destinatariodi controllo remoto

15. TastoMode/Subwoofer

16.EntradaAux

2. HANDLING COMPACT DISCS

MOISTURE CONDENSATION

On a rainy day or in a very damp area, moisture may condense on the lenses inside the unit. Should this occur, the unit will not operate properly. In such a case, remove the disc and wait for about an hour until themoisture has evaporated.

NOTES ON CDs

A dirty or defective disc may cause sound dropouts while playing. To enjoy optimum sound, handle the disc as follows. Handle the disc by its edge. To keep the disc clean, do not touch the surface (P.1).

P. 1

Do not stickpaper or tapeon thedisc (P.2).

P. 2

Do not expose the discs to direct sunlight or

heat sources such as hot air-ducts, or leave them in a car parked in direct sunlight where there can be a considerable rise in temperature inside the car (P.3).

Before playing, clean the discs with an

optional cleaning cloth. Wipe each disc from the centre out (P.4).

P. 3

NOTES ON DISCS

If you use the discs explained below, the sticky residue can cause the CD to stop spinning and may cause malfunction or ruin your discs.

Do not use second-hand or rental CDs that have a sticky residue on the surface (for example, from peeled-off stickers or from ink, or glue leaking from under the stickers).

There are paste residue. Ink is sticky (P.5).

P. 5

Do not use rental CDs with old labels that are beginning to peel off.

Stickers that are beginning to peel away, leaving a sticky residue (P.6).

P. 6

Do not use your CDs with labels or stickers attached.

Labels are attached (P.7).

P. 7

Do Not Use Special Shape CDs

Be sure to use round shape CDs only for this unit and do not use any special shape CDs. Use of special shape CDs may cause the unit to malfunction.(P.8).

****

*******

**************

*******

P. 4

Do not use solvents such as benzine,

thinner,commercially available cleaners, or antistatic spray intended for analog discs.

P. 8

Be sure to use CDs with disc mark CD-Rs and CD-RWs which have not

undergone finalization processing cannot be played. (For more information on finalization processing, refer to the manual for your CD-R/CD-RW writing software or CD-R/CD-RW recorder.) Additionally, depending on the recording status, it may prove impossible to play certain CDs record on CD-R or CD-RW.

E - 1

3. INSTALLATION

Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and system work properly.

Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.

Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.

Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, like an emergency stop.

If installation angle exceeds 30° from horizontal, the unit might not give its optimum performance.

Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or from hot air, from heater, or where it would be subject to dust dirt or excessive vibration.

Be sure to remove the front panel before installing the unit.

DIN FRONT/REAR-MOUNT

This unit can be property installed either from “Front” (conventional DIN Front-mount) or “Rear”(DIN Rear-mount installation, utilizing threaded screw holes at the sides of the unit chassis). For details, refer to the following illustrated installation methods A and B.

- DIN FRONT-MOUNT (Method A) Installation the unit

182

30°

1. Dashboard

2. Half Sleeve After inserting the half sleeve into the dashboard, select the appropriate tab according to the thickness of the dashboard material and bend them inwards to secure the holder in place.

3. Screw

4. Remove the two screws that fix the CD

deck mechanism player before mounting the unit.

1. Dashboard

2. Nut (5mm)

3. Spring washer

4. Screw (4x12mm)

5. Screw

6. Support Strap Be sure to use the support strap to

secure the back of the unit in place. The strap can be bent by hand to the desired angle.

7. Plain washer

E - 2

Removing the unit

a. Frame b. Insert fingers into the groove in the

front of frame and pull out to remove the frame. (When re-attaching the frame, point the side with a groove

down wards and attach it.)

c. Insert the levers supplied with the

unit into the grooves at both sides of the unit as shown in figure until they click. Pulling the levers makes it possible to remove the unit from the dashboard.

- Trim Plate Installation:

Before attaching the trim plate, the side with a "Bottom" Label stuck should be at down side (as shown on diagram). Push the trim plate against the main panel until it is fitted.

- DIN REAR-MOUNT (METHOD B)

Installation using the screw holes on the sides of the unit. Fastening the unit to the factory radio mounting bracket.

1. Select a position where the screw holes of the bracket and the screw holes of the main unit become aligned (are fitted) and tighten the screws at 2 places on each side.

2. Screw

3. Factory radio mounting bracket.

4. Dashboard or Console

5. Hook (Remove this part)

Note: The mounting box, outer trim ring, and half-sleeve are not used for method B installation.

- PANEL OPEN / CLOSE OPERATION

1. Press Open button

T E

S E R

2. The CD slot will be accessible.

3. After CD is loaded or unloaded return the panel to its original position.

Note: Before inserting or ejecting disc, press the Release button to flip down the faceplate.

O T OT B

TT M

NCID

Open button

E - 3

+ 11 hidden pages